Bug#572922: xserver-xorg-video-intel: X server crashes on blank when only using a secondary display
Package: xserver-xorg-video-intel
Version: 2:2.9.1-2
Severity: normal
While using X on my Lenovo ThinkPad X200 and setting the display to the
external display only (VGA connector, turning off LVDS), it'll crash as soon
as the display blanks. This doesn't happen if LVDS is on or it's LVDS only.
I can use it normally if it doesn't blanks.
I found this on Xorg.0.log.old:
--------
(II) intel(0): Allocate new frame buffer 1680x1050 stride 1792
Backtrace:
0: /usr/bin/X (xorg_backtrace+0x28) [0x4a0b88]
1: /usr/bin/X (0x400000+0x64259) [0x464259]
2: /lib/libpthread.so.0 (0x7fd95b4ba000+0xe990) [0x7fd95b4c8990]
3: /usr/bin/X (xf86GetGammaRampSize+0x4b) [0x52793b]
4: /usr/lib/xorg/modules/extensions/libextmod.so (0x7fd958e9f000+0xbdc5) [0x7fd958eaadc5]
5: /usr/bin/X (0x400000+0x31584) [0x431584]
6: /usr/bin/X (0x400000+0x25bca) [0x425bca]
7: /lib/libc.so.6 (__libc_start_main+0xfd) [0x7fd959daeabd]
8: /usr/bin/X (0x400000+0x25779) [0x425779]
Segmentation fault at address 0x1b8
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
---------------
Videocard has pci id 8086:2a42
Running post 2.6.33 kernel (linus' git), but the problem happens on pre 2.6.33
kernels too.
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx. 1 root root 13 Jan 23 2009 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1866912 Feb 16 05:25 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 3620 Jul 10 2009 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
# FontPath "unix/:7100" # local font server
# FontPath "unix/:7101" # local font server
FontPath "/etc/X11/fonts/100dpi"
FontPath "/etc/X11/fonts/75dpi"
FontPath "/etc/X11/fonts/misc"
FontPath "/etc/X11/fonts/Type1"
FontPath "/etc/X11/fonts/X11R7"
# if the local font server has problems, we can fall back on these
# FontPath "/usr/share/fonts/X11/misc"
# FontPath "/usr/lib/X11/fonts/misc"
# FontPath "/usr/share/fonts/X11/cyrillic"
# FontPath "/usr/lib/X11/fonts/cyrillic"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/share/fonts/X11/Type1"
# FontPath "/usr/lib/X11/fonts/Type1"
# FontPath "/usr/share/fonts/X11/CID"
# FontPath "/usr/lib/X11/fonts/CID"
# FontPath "/usr/share/fonts/X11/100dpi"
# FontPath "/usr/lib/X11/fonts/100dpi"
# FontPath "/usr/share/fonts/X11/75dpi"
# FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "intel"
# VideoRAM 64000
Option "monitor-LVDS" "lcd"
# Option "monitor-VGA" "samsung"
# Option "noaccel" "on"
EndSection
Section "Monitor"
Identifier "lcd"
Option "Position" "0 0"
EndSection
#Section "Monitor"
# Identifier "samsung"
# Option "Position" "1280 0"
# Option "RightOf" "lcd"
# HorizSync 30-81
# VertRefresh 56-75
#EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "lcd"
EndSection
Section "InputDevice"
Identifier "cursor-g4"
Driver "wacom"
Option "Type" "cursor"
Option "Device" "/dev/input/wacom-tablets/graphire4-4x5"
Option "Mode" "relative"
Option "Tilt" "on"
Option "Threshold" "20"
Option "Suppress" "6"
Option "USB" "On"
EndSection
Section "InputDevice"
Identifier "stylus-g4"
Driver "wacom"
Option "Type" "stylus"
Option "Device" "/dev/input/wacom-tablets/graphire4-4x5"
Option "Mode" "absolute"
Option "Tilt" "on"
Option "Threshold" "20"
Option "PressCurve" "5,0,100,95"
Option "Suppress" "6"
Option "USB" "On"
EndSection
Section "InputDevice"
Identifier "eraser-g4"
Driver "wacom"
Option "Type" "eraser"
Option "Device" "/dev/input/wacom-tablets/graphire4-4x5"
Option "Mode" "absolute"
Option "Tilt" "on"
Option "Threshold" "20"
Option "PressCurve" "5,0,100,95"
Option "Suppress" "6"
Option "USB" "On"
EndSection
Section "InputDevice"
Identifier "pad-g4"
Driver "wacom"
Option "Type" "pad"
Option "Device" "/dev/input/wacom-tablets/graphire4-4x5"
EndSection
Section "ServerLayout"
Identifier "default"
Screen 0 "Default Screen"
InputDevice "cursor-g4" "AlwaysCore"
InputDevice "eraser-g4" "AlwaysCore"
InputDevice "stylus-g4" "AlwaysCore"
InputDevice "pad-g4"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 19755 Jan 26 2009 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 40336 Mar 5 16:39 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.8-dsa-amd64 x86_64 Debian
Current Operating System: Linux james 2.6.33 #68 SMP Mon Mar 1 22:25:20 EST 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.33 root=UUID=be30a3cb-0039-4d67-a43b-3cf03c558661 ro resume=/dev/sda4
Build Date: 16 February 2010 10:23:38AM
xorg-server 2:1.7.5-1 (buildd@brahms.debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 5 16:37:32 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "default"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "lcd"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(**) |-->Input Device "cursor-g4"
(**) |-->Input Device "eraser-g4"
(**) |-->Input Device "stylus-g4"
(**) |-->Input Device "pad-g4"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/etc/X11/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/etc/X11/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/etc/X11/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/etc/X11/fonts/75dpi").
(WW) `fonts.dir' not found (or not valid) in "/etc/X11/fonts/misc".
Entry deleted from font path.
(Run 'mkfontdir' on "/etc/X11/fonts/misc").
(WW) `fonts.dir' not found (or not valid) in "/etc/X11/fonts/Type1".
Entry deleted from font path.
(Run 'mkfontdir' on "/etc/X11/fonts/Type1").
(WW) `fonts.dir' not found (or not valid) in "/etc/X11/fonts/X11R7".
Entry deleted from font path.
(Run 'mkfontdir' on "/etc/X11/fonts/X11R7").
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c1e20
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 13
(--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e4 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a43:17aa:20e4 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf2400000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "wacom"
(WW) Warning, couldn't open module wacom
(II) UnloadModule: "wacom"
(EE) Failed to load module "wacom" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(II) intel(0): Output VGA1 using monitor section lcd
(**) intel(0): Option "Position" "0 0"
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output HDMI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output HDMI2 has no monitor section
(II) intel(0): Output DP2 has no monitor section
(II) intel(0): Output DP3 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: SAM Model: 27c Serial#: 1296380464
(II) intel(0): Year: 2007 Week: 6
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) intel(0): Sync: Separate Composite SyncOnGreen
(II) intel(0): Max Image Size [cm]: horiz.: 43 vert.: 27
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): 1152x864@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 119.0 MHz Image Size: 433 x 271 mm
(II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
(II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
(II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: SyncMaster
(II) intel(0): Serial No: HVBP200702
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004c2d7c023032454d
(II) intel(0): 061101030e2b1b782aee95a3544c9926
(II) intel(0): 0f5054bfef80b30081808140714f0101
(II) intel(0): 0101010101017c2e90a0601a1e403020
(II) intel(0): 3600b10f1100001a000000fd00384b1e
(II) intel(0): 510e000a202020202020000000fc0053
(II) intel(0): 796e634d61737465720a2020000000ff
(II) intel(0): 00485642503230303730320a2020008a
(II) intel(0): EDID vendor "SAM", prod id 636
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Not using mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: LEN Model: 4010 Serial#: 0
(II) intel(0): Year: 2007 Week: 1
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) intel(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 71.1 MHz Image Size: 261 x 163 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 59.3 MHz Image Size: 261 x 163 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) intel(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0): B121EW03 V6
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0030ae104000000000
(II) intel(0): 01110103801a1078ea87f594574f8c27
(II) intel(0): 27505400000001010101010101010101
(II) intel(0): 010101010101c61b00a0502017303020
(II) intel(0): 360005a310000018261700a050201730
(II) intel(0): 3020360005a3100000180000000f0081
(II) intel(0): 0a3c810a3214010006af1436000000fe
(II) intel(0): 004231323145573033205636200a00aa
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x60.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) intel(0): Modeline "1280x800"x50.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): EDID for output HDMI1
(II) intel(0): EDID for output DP1
(II) intel(0): EDID for output HDMI2
(II) intel(0): EDID for output DP2
(II) intel(0): EDID for output DP3
(II) intel(0): Output VGA1 connected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output HDMI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output HDMI2 disconnected
(II) intel(0): Output DP2 disconnected
(II) intel(0): Output DP3 disconnected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA1 using initial mode 1680x1050
(II) intel(0): Output LVDS1 using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(**) intel(0): Display dimensions: (430, 270) mm
(**) intel(0): DPI set to (99, 98)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "monitor-LVDS" is not used
(WW) intel(0): Option "Position" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 444 x 277
(II) LoadModule: "wacom"
(WW) Warning, couldn't open module wacom
(II) UnloadModule: "wacom"
(EE) Failed to load module "wacom" (module does not exist, 0)
(EE) No input driver matching `wacom'
(II) LoadModule: "wacom"
(WW) Warning, couldn't open module wacom
(II) UnloadModule: "wacom"
(EE) Failed to load module "wacom" (module does not exist, 0)
(EE) No input driver matching `wacom'
(II) LoadModule: "wacom"
(WW) Warning, couldn't open module wacom
(II) UnloadModule: "wacom"
(EE) Failed to load module "wacom" (module does not exist, 0)
(EE) No input driver matching `wacom'
(II) LoadModule: "wacom"
(WW) Warning, couldn't open module wacom
(II) UnloadModule: "wacom"
(EE) Failed to load module "wacom" (module does not exist, 0)
(EE) No input driver matching `wacom'
(II) config/udev: Adding input device "Power Button" (/dev/input/event3)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event3"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Video Bus" (/dev/input/event11)
(**) "Video Bus": always reports core events
(**) "Video Bus": Device: "/dev/input/event11"
(II) "Video Bus": Found keys
(II) "Video Bus": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event2)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event2"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Belkin Belkin n52te" (/dev/input/event12)
(**) "Belkin Belkin n52te": always reports core events
(**) "Belkin Belkin n52te": Device: "/dev/input/event12"
(II) "Belkin Belkin n52te": Found keys
(II) "Belkin Belkin n52te": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Belkin Belkin n52te"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "Belkin Belkin n52te" (/dev/input/event13)
(**) "Belkin Belkin n52te": always reports core events
(**) "Belkin Belkin n52te": Device: "/dev/input/event13"
(II) "Belkin Belkin n52te": Found 8 mouse buttons
(II) "Belkin Belkin n52te": Found scroll wheel(s)
(II) "Belkin Belkin n52te": Found relative axes
(II) "Belkin Belkin n52te": Found x and y relative axes
(II) "Belkin Belkin n52te": Found absolute axes
(II) "Belkin Belkin n52te": Found keys
(II) "Belkin Belkin n52te": Configuring as mouse
(II) "Belkin Belkin n52te": Configuring as keyboard
(**) "Belkin Belkin n52te": YAxisMapping: buttons 4 and 5
(**) "Belkin Belkin n52te": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Belkin Belkin n52te"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(**) "Belkin Belkin n52te": (accel) keeping acceleration scheme 1
(**) "Belkin Belkin n52te": (accel) acceleration profile 0
(II) "Belkin Belkin n52te": initialized for relative axes.
(WW) "Belkin Belkin n52te": ignoring absolute axes.
(II) config/udev: Adding input device "Belkin Belkin n52te" (/dev/input/mouse1)
(**) "Belkin Belkin n52te": always reports core events
(**) "Belkin Belkin n52te": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Belkin Belkin n52te""
(II) config/udev: Adding input device "CHESEN PS2 to USB Converter" (/dev/input/event14)
(**) "CHESEN PS2 to USB Converter": always reports core events
(**) "CHESEN PS2 to USB Converter": Device: "/dev/input/event14"
(II) "CHESEN PS2 to USB Converter": Found keys
(II) "CHESEN PS2 to USB Converter": Configuring as keyboard
(II) XINPUT: Adding extended input device ""CHESEN PS2 to USB Converter"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "CHESEN PS2 to USB Converter" (/dev/input/event15)
(**) "CHESEN PS2 to USB Converter": always reports core events
(**) "CHESEN PS2 to USB Converter": Device: "/dev/input/event15"
(II) "CHESEN PS2 to USB Converter": Found 10 mouse buttons
(II) "CHESEN PS2 to USB Converter": Found scroll wheel(s)
(II) "CHESEN PS2 to USB Converter": Found relative axes
(II) "CHESEN PS2 to USB Converter": Found x and y relative axes
(II) "CHESEN PS2 to USB Converter": Found absolute axes
(II) "CHESEN PS2 to USB Converter": Found keys
(II) "CHESEN PS2 to USB Converter": Configuring as mouse
(II) "CHESEN PS2 to USB Converter": Configuring as keyboard
(**) "CHESEN PS2 to USB Converter": YAxisMapping: buttons 4 and 5
(**) "CHESEN PS2 to USB Converter": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""CHESEN PS2 to USB Converter"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(**) "CHESEN PS2 to USB Converter": (accel) keeping acceleration scheme 1
(**) "CHESEN PS2 to USB Converter": (accel) acceleration profile 0
(II) "CHESEN PS2 to USB Converter": initialized for relative axes.
(WW) "CHESEN PS2 to USB Converter": ignoring absolute axes.
(II) config/udev: Adding input device "CHESEN PS2 to USB Converter" (/dev/input/mouse2)
(**) "CHESEN PS2 to USB Converter": always reports core events
(**) "CHESEN PS2 to USB Converter": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""CHESEN PS2 to USB Converter""
(II) config/udev: Adding input device "Logitech Trackball" (/dev/input/event16)
(**) "Logitech Trackball": always reports core events
(**) "Logitech Trackball": Device: "/dev/input/event16"
(II) "Logitech Trackball": Found 3 mouse buttons
(II) "Logitech Trackball": Found scroll wheel(s)
(II) "Logitech Trackball": Found relative axes
(II) "Logitech Trackball": Found x and y relative axes
(II) "Logitech Trackball": Configuring as mouse
(**) "Logitech Trackball": YAxisMapping: buttons 4 and 5
(**) "Logitech Trackball": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Logitech Trackball"" (type: MOUSE)
(**) "Logitech Trackball": (accel) keeping acceleration scheme 1
(**) "Logitech Trackball": (accel) acceleration profile 0
(II) "Logitech Trackball": initialized for relative axes.
(II) config/udev: Adding input device "Logitech Trackball" (/dev/input/mouse3)
(**) "Logitech Trackball": always reports core events
(**) "Logitech Trackball": Device: "/dev/input/mouse3"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Logitech Trackball""
(II) config/udev: Adding input device "UVC Camera (17ef:480c)" (/dev/input/event5)
(**) "UVC Camera (17ef:480c)": always reports core events
(**) "UVC Camera (17ef:480c)": Device: "/dev/input/event5"
(II) "UVC Camera (17ef:480c)": Found keys
(II) "UVC Camera (17ef:480c)": Configuring as keyboard
(II) XINPUT: Adding extended input device ""UVC Camera (17ef:480c)"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event0)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event0"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device "TPPS/2 IBM TrackPoint" (/dev/input/event4)
(**) "TPPS/2 IBM TrackPoint": always reports core events
(**) "TPPS/2 IBM TrackPoint": Device: "/dev/input/event4"
(II) "TPPS/2 IBM TrackPoint": Found 3 mouse buttons
(II) "TPPS/2 IBM TrackPoint": Found relative axes
(II) "TPPS/2 IBM TrackPoint": Found x and y relative axes
(II) "TPPS/2 IBM TrackPoint": Configuring as mouse
(**) "TPPS/2 IBM TrackPoint": YAxisMapping: buttons 4 and 5
(**) "TPPS/2 IBM TrackPoint": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""TPPS/2 IBM TrackPoint"" (type: MOUSE)
(**) "TPPS/2 IBM TrackPoint": (accel) keeping acceleration scheme 1
(**) "TPPS/2 IBM TrackPoint": (accel) acceleration profile 0
(II) "TPPS/2 IBM TrackPoint": initialized for relative axes.
(II) config/udev: Adding input device "TPPS/2 IBM TrackPoint" (/dev/input/mouse0)
(**) "TPPS/2 IBM TrackPoint": always reports core events
(**) "TPPS/2 IBM TrackPoint": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""TPPS/2 IBM TrackPoint""
(II) config/udev: Adding input device "ACPI Virtual Keyboard Device" (/dev/input/event10)
(**) "ACPI Virtual Keyboard Device": always reports core events
(**) "ACPI Virtual Keyboard Device": Device: "/dev/input/event10"
(II) "ACPI Virtual Keyboard Device": Found keys
(II) "ACPI Virtual Keyboard Device": Configuring as keyboard
(II) XINPUT: Adding extended input device ""ACPI Virtual Keyboard Device"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) intel(0): Modeline "1280x800"x0.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) intel(0): Modeline "1280x800"x0.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16400
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.10 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) intel(0): Modeline "1280x800"x0.0 59.26 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (41.2 kHz)
udev information:
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: char/13:64
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:64 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: x11_driver=evdev
E: DMI_VENDOR=LENOVO
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1
N: input/event1
S: char/13:65
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=LENOVO
E: DEVLINKS=/dev/char/13:65
P: /devices/virtual/input/input10/event10
N: input/event10
S: char/13:74
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input10/event10
E: MAJOR=13
E: MINOR=74
E: DEVNAME=/dev/input/event10
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:74
E: x11_driver=evdev
E: DMI_VENDOR=LENOVO
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event11
N: input/event11
S: char/13:75
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event11
E: MAJOR=13
E: MINOR=75
E: DEVNAME=/dev/input/event11
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:75
E: x11_driver=evdev
E: DMI_VENDOR=LENOVO
P: /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input12/event12
N: input/event12
S: char/13:76
S: input/by-id/usb-Belkin_Belkin_n52te-event-kbd
S: input/by-path/pci-0000:00:1a.7-usb-0:5.1:1.0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input12/event12
E: MAJOR=13
E: MINOR=76
E: DEVNAME=/dev/input/event12
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=Belkin
E: ID_VENDOR_ENC=Belkin
E: ID_VENDOR_ID=050d
E: ID_MODEL=Belkin_n52te
E: ID_MODEL_ENC=Belkin\x20n52te
E: ID_MODEL_ID=0200
E: ID_REVISION=2100
E: ID_SERIAL=Belkin_Belkin_n52te
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030002:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.7-usb-0:5.1:1.0
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:76 /dev/input/by-id/usb-Belkin_Belkin_n52te-event-kbd /dev/input/by-path/pci-0000:00:1a.7-usb-0:5.1:1.0-event-kbd
E: x11_driver=evdev
P: /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.1/input/input13/event13
N: input/event13
S: char/13:77
S: input/by-id/usb-Belkin_Belkin_n52te-event-mouse
S: input/by-path/pci-0000:00:1a.7-usb-0:5.1:1.1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.1/input/input13/event13
E: MAJOR=13
E: MINOR=77
E: DEVNAME=/dev/input/event13
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Belkin
E: ID_VENDOR_ENC=Belkin
E: ID_VENDOR_ID=050d
E: ID_MODEL=Belkin_n52te
E: ID_MODEL_ENC=Belkin\x20n52te
E: ID_MODEL_ID=0200
E: ID_REVISION=2100
E: ID_SERIAL=Belkin_Belkin_n52te
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030002:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.7-usb-0:5.1:1.1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:77 /dev/input/by-id/usb-Belkin_Belkin_n52te-event-mouse /dev/input/by-path/pci-0000:00:1a.7-usb-0:5.1:1.1-event-mouse
E: x11_driver=evdev
P: /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.3/1-5.3.1/1-5.3.1:1.0/input/input14/event14
N: input/event14
S: char/13:78
S: input/by-id/usb-CHESEN_PS2_to_USB_Converter-event-kbd
S: input/by-path/pci-0000:00:1a.7-usb-0:5.3.1:1.0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.3/1-5.3.1/1-5.3.1:1.0/input/input14/event14
E: MAJOR=13
E: MINOR=78
E: DEVNAME=/dev/input/event14
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_VENDOR=CHESEN
E: ID_VENDOR_ENC=CHESEN
E: ID_VENDOR_ID=0518
E: ID_MODEL=PS2_to_USB_Converter
E: ID_MODEL_ENC=PS2\x20to\x20USB\x20Converter
E: ID_MODEL_ID=0001
E: ID_REVISION=0010
E: ID_SERIAL=CHESEN_PS2_to_USB_Converter
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.7-usb-0:5.3.1:1.0
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:78 /dev/input/by-id/usb-CHESEN_PS2_to_USB_Converter-event-kbd /dev/input/by-path/pci-0000:00:1a.7-usb-0:5.3.1:1.0-event-kbd
E: x11_driver=evdev
P: /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.3/1-5.3.1/1-5.3.1:1.1/input/input15/event15
N: input/event15
S: char/13:79
S: input/by-id/usb-CHESEN_PS2_to_USB_Converter-event-mouse
S: input/by-path/pci-0000:00:1a.7-usb-0:5.3.1:1.1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.3/1-5.3.1/1-5.3.1:1.1/input/input15/event15
E: MAJOR=13
E: MINOR=79
E: DEVNAME=/dev/input/event15
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=CHESEN
E: ID_VENDOR_ENC=CHESEN
E: ID_VENDOR_ID=0518
E: ID_MODEL=PS2_to_USB_Converter
E: ID_MODEL_ENC=PS2\x20to\x20USB\x20Converter
E: ID_MODEL_ID=0001
E: ID_REVISION=0010
E: ID_SERIAL=CHESEN_PS2_to_USB_Converter
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030101:030102:
E: ID_USB_INTERFACE_NUM=01
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.7-usb-0:5.3.1:1.1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:79 /dev/input/by-id/usb-CHESEN_PS2_to_USB_Converter-event-mouse /dev/input/by-path/pci-0000:00:1a.7-usb-0:5.3.1:1.1-event-mouse
E: x11_driver=evdev
P: /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.3/1-5.3.4/1-5.3.4:1.0/input/input16/event16
N: input/event16
S: char/13:80
S: input/by-id/usb-Logitech_Trackball-event-mouse
S: input/by-path/pci-0000:00:1a.7-usb-0:5.3.4:1.0-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.3/1-5.3.4/1-5.3.4:1.0/input/input16/event16
E: MAJOR=13
E: MINOR=80
E: DEVNAME=/dev/input/event16
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Logitech
E: ID_VENDOR_ENC=Logitech
E: ID_VENDOR_ID=046d
E: ID_MODEL=Trackball
E: ID_MODEL_ENC=Trackball
E: ID_MODEL_ID=c404
E: ID_REVISION=0220
E: ID_SERIAL=Logitech_Trackball
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:1a.7-usb-0:5.3.4:1.0
E: x11_driver=evdev
E: DEVLINKS=/dev/char/13:80 /dev/input/by-id/usb-Logitech_Trackball-event-mouse /dev/input/by-path/pci-0000:00:1a.7-usb-0:5.3.4:1.0-event-mouse
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:66
E: x11_driver=evdev
E: DMI_VENDOR=LENOVO
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:67
E: x11_driver=evdev
E: DMI_VENDOR=LENOVO
P: /devices/platform/i8042/serio1/input/input4/event4
N: input/event4
S: char/13:68
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: x11_driver=evdev
E: DMI_VENDOR=LENOVO
E: DEVLINKS=/dev/char/13:68 /dev/input/by-path/platform-i8042-serio-1-event-mouse
P: /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input5/event5
N: input/event5
S: char/13:69
S: input/by-id/usb-Chicony_Electronics_Co.__Ltd._480c-event-if00
S: input/by-path/pci-0000:00:1a.7-usb-0:6:1.0-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Chicony_Electronics_Co.__Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2c\x20Ltd.
E: ID_VENDOR_ID=17ef
E: ID_MODEL=480c
E: ID_MODEL_ENC=480c
E: ID_MODEL_ID=480c
E: ID_REVISION=3134
E: ID_SERIAL=Chicony_Electronics_Co.__Ltd._480c
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:1a.7-usb-0:6:1.0
E: XKBMODEL=pc104
E: XKBLAYOUT=us
E: DEVLINKS=/dev/char/13:69 /dev/input/by-id/usb-Chicony_Electronics_Co.__Ltd._480c-event-if00 /dev/input/by-path/pci-0000:00:1a.7-usb-0:6:1.0-event
E: x11_driver=evdev
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input6/event6
N: input/event6
S: char/13:70
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ACL_MANAGE=1
E: DMI_VENDOR=LENOVO
E: DEVLINKS=/dev/char/13:70
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input7/event7
N: input/event7
S: char/13:71
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input7/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ACL_MANAGE=1
E: DMI_VENDOR=LENOVO
E: DEVLINKS=/dev/char/13:71
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input8/event8
N: input/event8
S: char/13:72
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input8/event8
E: MAJOR=13
E: MINOR=72
E: DEVNAME=/dev/input/event8
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ACL_MANAGE=1
E: DMI_VENDOR=LENOVO
E: DEVLINKS=/dev/char/13:72
P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event9
N: input/event9
S: char/13:73
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9/event9
E: MAJOR=13
E: MINOR=73
E: DEVNAME=/dev/input/event9
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ACL_MANAGE=1
E: DMI_VENDOR=LENOVO
E: DEVLINKS=/dev/char/13:73
DRM Information from dmesg:
[ 0.000000] No AGP bridge found
[ 0.000000] No AGP bridge found
[ 0.935406] Linux agpgart interface v0.103
[ 1.266694] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 1.269569] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 1.323901] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 60.149848] [drm] Initialized drm 1.1.0 20060810
[ 60.295336] [drm] set up 31M of stolen space
[ 61.096523] fb0: inteldrmfb frame buffer device
[ 61.104217] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing'), (101, 'experimental'), (101, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.33 (SMP w/2 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib
ii libdrm-intel1 2.4.18-2 Userspace interface to intel-speci
ii libdrm2 2.4.18-2 Userspace interface to kernel DRM
ii libpciaccess0 0.11.0-1 Generic PCI access library for X
ii libxext6 2:1.1.1-2 X11 miscellaneous extension librar
ii libxfixes3 1:4.0.4-1 X11 miscellaneous 'fixes' extensio
ii libxv1 2:1.0.5-1 X11 Video extension library
ii libxvmc1 2:1.0.5-1 X11 Video extension library
ii xserver-xorg-core 2:1.7.5-1 Xorg X server - core server
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
Reply to: