Bug#571741: System freezes after pm-hibernate when kms is on

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: Bug#571741: System freezes after pm-hibernate when kms is on
From: Santiago Garcia Mantinan <manty@debian.org>
Date: Sat, 27 Feb 2010 19:02:19 +0100
Message-id: <[🔎] 20100227180219.32754.69420.reportbug@bat.alpha.red>
Reply-to: Santiago Garcia Mantinan <manty@debian.org>, 571741@bugs.debian.org
Package: xserver-xorg-video-intel
Version: 2:2.9.1-2
Severity: important


Hi!

After going from 2.9.1-1 to 2.9.1-2 I started to experiment computer
freezes or weird things, all of them seemed to tell me that some memory
corruption was going on, can't tell much about it, only that I had to reset
the machine on almost every resume from pm-hibernate.

After reading the changelog I thought that kms was the biggest change going
on, so I commented the kms line at /etc/modprobe.d/i915-kms.conf and
everything seems find now, at least it seems as good as it used to be.

Machine is a Compaq Presario C760EM laptop running linux-image-2.6.32-2-amd64
version 2.6.32-8.  Info about the video hardware should be down here, if you
need any other info just tell me.

-- Package-specific info:
/var/lib/x11/X.roster does not exist.

/var/lib/x11/X.md5sum does not exist.

X server symlink status:
lrwxrwxrwx 1 root root 13 Jul  1  2008 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1866912 Feb 16 11:25 /usr/bin/Xorg

/var/lib/x11/xorg.conf.roster does not exist.

VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)

/var/lib/x11/xorg.conf.md5sum does not exist.

Xorg X server configuration file status:
-rw-r--r-- 1 root root 1619 Jan 30 01:04 /etc/X11/xorg.conf

Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"es"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
EndSection

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "CorePointer"
	Option		"TapButton1" "1"
	Option		"TapButton2" "2"
	Option		"TapButton3" "3"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
EndSection

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
Subsection "Display"
	Depth 24
	Virtual 2560 800
EndSubsection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        InputDevice     "Synaptics Touchpad"
EndSection


Xorg X server log files on system:
-rw-r--r-- 1 root root 30434 Feb 19 22:51 /var/log/Xorg.20.log
-rw-r--r-- 1 root root 92978 Feb 27 18:09 /var/log/Xorg.0.log

Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:

X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.4-dsa-amd64 x86_64 Debian
Current Operating System: Linux bat 2.6.32-2-amd64 #1 SMP Fri Feb 12 00:01:47 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-2-amd64 root=UUID=046e2800-818f-447c-a9ef-0a5beb51de0c ro ipv6.disable=1 quiet
Build Date: 20 January 2010  11:36:07PM
xorg-server 2:1.7.4-2 (buildd@brahms.debian.org) 
Current version of pixman: 0.16.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 23 19:30:06 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
	Using the first device section listed.
(**) |   |-->Device "Configured Video Device"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Synaptics Touchpad"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi,
	built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Generic Keyboard
(WW) Disabling Configured Mouse
(II) Loader magic: 0x7c1600
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2a02:103c:30d9 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0x91000000/1048576, 0x80000000/268435456, I/O @ 0x000030d0/8
(--) PCI: (0:0:2:1) 8086:2a03:103c:30d9 Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0x91100000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.9.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 1.2.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 0.1.0
	ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0x80000000
(--) intel(0): IO registers at addr 0x91000000 size 1048576
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: SEC  Model: 4d45  Serial#: 0
(II) intel(0): Year: 2007  Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
(II) intel(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 69.3 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1280  h_sync: 1296  h_sync_end 1344 h_blank_end 1416 h_border: 0
(II) intel(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 816 v_border: 0
(II) intel(0): Unknown vendor-specific block f
(II) intel(0):  SAMSUNG
(II) intel(0):  LTN154X3-L01
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff004ca3454d00000000
(II) intel(0): 	00110103802115780a87f594574f8c27
(II) intel(0): 	27505400000001010101010101010101
(II) intel(0): 	010101010101121b0088502010301030
(II) intel(0): 	13004bcf100000190000000f00000000
(II) intel(0): 	00000000002387026404000000fe0053
(II) intel(0): 	414d53554e470a2020202020000000fe
(II) intel(0): 	004c544e31353458332d4c30310a001b
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID for output VGA
(II) intel(0): EDID for output LVDS
(II) intel(0): Manufacturer: SEC  Model: 4d45  Serial#: 0
(II) intel(0): Year: 2007  Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): GTF timings supported
(II) intel(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
(II) intel(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 69.3 MHz   Image Size:  331 x 207 mm
(II) intel(0): h_active: 1280  h_sync: 1296  h_sync_end 1344 h_blank_end 1416 h_border: 0
(II) intel(0): v_active: 800  v_sync: 801  v_sync_end 804 v_blanking: 816 v_border: 0
(II) intel(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz,
(II) intel(0):  SAMSUNG
(II) intel(0):  LTN154X3-L01
(II) intel(0): EDID (in hex):
(II) intel(0): 	00ffffffffffff004ca3454d00000000
(II) intel(0): 	00110103802115780a87f594574f8c27
(II) intel(0): 	27505400000001010101010101010101
(II) intel(0): 	010101010101121b0088502010301030
(II) intel(0): 	13004bcf100000190000000f00000000
(II) intel(0): 	00000000002387026404000000fe0053
(II) intel(0): 	414d53554e470a2020202020000000fe
(II) intel(0): 	004c544e31353458332d4c30310a001b
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (height too large for virtual size)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (height too large for virtual size)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (height too large for virtual size)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (height too large for virtual size)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (height too large for virtual size)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (height too large for virtual size)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (height too large for virtual size)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (height too large for virtual size)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (height too large for virtual size)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (height too large for virtual size)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (height too large for virtual size)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS
(II) intel(0): Modeline "1280x800"x60.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x85.1   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x85.0   35.50  720 756 828 936  400 401 404 446 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x400"x85.1   31.50  640 672 736 832  400 401 404 445 -hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x350"x85.1   31.50  640 672 736 832  350 382 385 445 +hsync -vsync (37.9 kHz)
(II) intel(0): EDID for output TV
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.7.4, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000203 to 0x00000237
(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS OFIELD_INT_STATUS EFIELD_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x100000c0 to 0x000c00c0
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 480512 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1922044 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00f6efff: front buffer (8000 kB) X tiled
(II) intel(0): 0x00f9f000-0x00f9ffff: overlay registers (4 kB)
(II) intel(0): 0x00fa0000-0x00fa9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): New front buffer at 0xfc6000
(II) Synaptics touchpad driver version 1.2.1
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event9
(**) Option "Device" "/dev/input/event9"
(II) Synaptics Touchpad: x-axis range 0 - 1023
(II) Synaptics Touchpad: y-axis range 0 - 767
(II) Synaptics Touchpad: pressure range 0 - 127
(II) Synaptics Touchpad: finger width range 0 - 0
(II) Synaptics Touchpad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) Synaptics Touchpad: touchpad found
(**) Option "CorePointer"
(**) Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD)
(**) Synaptics Touchpad: (accel) keeping acceleration scheme 1
(**) Synaptics Touchpad: (accel) acceleration profile 0
(--) Synaptics Touchpad: touchpad found
(II) config/udev: Adding input device "Power Button" (/dev/input/event5)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.7.3.902, module version = 2.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event5"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Video Bus" (/dev/input/event6)
(**) "Video Bus": always reports core events
(**) "Video Bus": Device: "/dev/input/event6"
(II) "Video Bus": Found keys
(II) "Video Bus": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Power Button" (/dev/input/event2)
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event2"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event4)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event4"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "CNF7041" (/dev/input/event10)
(**) "CNF7041": always reports core events
(**) "CNF7041": Device: "/dev/input/event10"
(II) "CNF7041": Found keys
(II) "CNF7041": Configuring as keyboard
(II) XINPUT: Adding extended input device ""CNF7041"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event1)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event1"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/udev: Adding input device "PS/2 Mouse" (/dev/input/event8)
(**) "PS/2 Mouse": always reports core events
(**) "PS/2 Mouse": Device: "/dev/input/event8"
(II) "PS/2 Mouse": Found 3 mouse buttons
(II) "PS/2 Mouse": Found relative axes
(II) "PS/2 Mouse": Found x and y relative axes
(II) "PS/2 Mouse": Configuring as mouse
(**) "PS/2 Mouse": YAxisMapping: buttons 4 and 5
(**) "PS/2 Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""PS/2 Mouse"" (type: MOUSE)
(**) "PS/2 Mouse": (accel) keeping acceleration scheme 1
(**) "PS/2 Mouse": (accel) acceleration profile 0
(II) "PS/2 Mouse": initialized for relative axes.
(II) config/udev: Adding input device "PS/2 Mouse" (/dev/input/mouse1)
(**) "PS/2 Mouse": always reports core events
(**) "PS/2 Mouse": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""PS/2 Mouse""
(II) config/udev: Adding input device "AlpsPS/2 ALPS GlidePoint" (/dev/input/event9)
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event9"
(--) "AlpsPS/2 ALPS GlidePoint": no supported touchpad found
(EE) "AlpsPS/2 ALPS GlidePoint" Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device ""AlpsPS/2 ALPS GlidePoint""
(II) UnloadModule: "synaptics"
(II) config/udev: Adding input device "AlpsPS/2 ALPS GlidePoint" (/dev/input/mouse2)
(**) "AlpsPS/2 ALPS GlidePoint": always reports core events
(**) "AlpsPS/2 ALPS GlidePoint": Device: "/dev/input/mouse2"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""AlpsPS/2 ALPS GlidePoint""
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/event0"
(II) "Macintosh mouse button emulation": Found 3 mouse buttons
(II) "Macintosh mouse button emulation": Found relative axes
(II) "Macintosh mouse button emulation": Found x and y relative axes
(II) "Macintosh mouse button emulation": Configuring as mouse
(**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
(**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE)
(**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
(**) "Macintosh mouse button emulation": (accel) acceleration profile 0
(II) "Macintosh mouse button emulation": initialized for relative axes.
(II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
(II) config/udev: Adding input device "ACPI Virtual Keyboard Device" (/dev/input/event14)
(**) "ACPI Virtual Keyboard Device": always reports core events
(**) "ACPI Virtual Keyboard Device": Device: "/dev/input/event14"
(II) "ACPI Virtual Keyboard Device": Found keys
(II) "ACPI Virtual Keyboard Device": Configuring as keyboard
(II) XINPUT: Adding extended input device ""ACPI Virtual Keyboard Device"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): EDID vendor "SEC", prod id 19781
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1296 1344 1416  800 801 804 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "SEC", prod id 19781
(--) Synaptics Touchpad: touchpad found
(II) "Power Button": Device reopened after 1 attempts.
(II) "Video Bus": Device reopened after 1 attempts.
(II) "Power Button": Device reopened after 1 attempts.
(II) "Sleep Button": Device reopened after 1 attempts.
(II) "CNF7041": Device reopened after 1 attempts.
(II) "AT Translated Set 2 keyboard": Device reopened after 1 attempts.
(II) "PS/2 Mouse": Device reopened after 1 attempts.
(II) "Macintosh mouse button emulation": Device reopened after 1 attempts.
(II) "ACPI Virtual Keyboard Device": Device reopened after 1 attempts.
(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
(II) config/udev: Adding input device "ACPI Virtual Keyboard Device" (/dev/input/event15)
(**) "ACPI Virtual Keyboard Device": always reports core events
(**) "ACPI Virtual Keyboard Device": Device: "/dev/input/event15"
(II) "ACPI Virtual Keyboard Device": Found keys
(II) "ACPI Virtual Keyboard Device": Configuring as keyboard
(II) XINPUT: Adding extended input device ""ACPI Virtual Keyboard Device"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "es"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) Open ACPI successful (/var/run/acpid.socket)

udev information:
P: /devices/virtual/input/input0/event0
N: input/event0
S: char/13:64
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:64

P: /devices/platform/i8042/serio0/input/input1/event1
N: input/event1
S: char/13:65
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:65 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard

P: /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input10/event10
N: input/event10
S: char/13:74
S: input/by-id/usb-Chicony_Electronics_Co.__Ltd._CNF7041_SN0001-event-if00
S: input/by-path/pci-0000:00:1d.7-usb-0:6:1.0-event
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input10/event10
E: MAJOR=13
E: MINOR=74
E: DEVNAME=/dev/input/event10
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Chicony_Electronics_Co.__Ltd.
E: ID_VENDOR_ENC=Chicony\x20Electronics\x20Co.\x2c\x20Ltd.
E: ID_VENDOR_ID=04f2
E: ID_MODEL=CNF7041
E: ID_MODEL_ENC=CNF7041
E: ID_MODEL_ID=b057
E: ID_REVISION=0818
E: ID_SERIAL=Chicony_Electronics_Co.__Ltd._CNF7041_SN0001
E: ID_SERIAL_SHORT=SN0001
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:1d.7-usb-0:6:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:74 /dev/input/by-id/usb-Chicony_Electronics_Co.__Ltd._CNF7041_SN0001-event-if00 /dev/input/by-path/pci-0000:00:1d.7-usb-0:6:1.0-event
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
N: input/event11
S: char/13:75
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11/event11
E: MAJOR=13
E: MINOR=75
E: DEVNAME=/dev/input/event11
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ACL_MANAGE=1
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:75

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
N: input/event12
S: char/13:76
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input12/event12
E: MAJOR=13
E: MINOR=76
E: DEVNAME=/dev/input/event12
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ACL_MANAGE=1
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:76

P: /devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
N: input/event13
S: char/13:77
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/sound/card0/input13/event13
E: MAJOR=13
E: MINOR=77
E: DEVNAME=/dev/input/event13
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ACL_MANAGE=1
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:77

P: /devices/virtual/input/input14/event14
N: input/event14
S: char/13:78
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input14/event14
E: MAJOR=13
E: MINOR=78
E: DEVNAME=/dev/input/event14
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:78
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard

P: /devices/virtual/input/input15/event15
N: input/event15
S: char/13:79
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input15/event15
E: MAJOR=13
E: MINOR=79
E: DEVNAME=/dev/input/event15
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:79
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:66
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:67

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:68
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard

P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5
N: input/event5
S: char/13:69
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:69
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard

P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6
N: input/event6
S: char/13:70
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=es
E: DEVLINKS=/dev/char/13:70
E: XKBOPTIONS=lv3:ralt_switch
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard

P: /devices/platform/pcspkr/input/input7/event7
N: input/event7
S: char/13:71
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input7/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:71 /dev/input/by-path/platform-pcspkr-event-spkr

P: /devices/platform/i8042/serio1/input/input8/event8
N: input/event8
S: char/13:72
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input8/event8
E: MAJOR=13
E: MINOR=72
E: DEVNAME=/dev/input/event8
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:72 /dev/input/by-path/platform-i8042-serio-1-event-mouse

P: /devices/platform/i8042/serio1/input/input9/event9
N: input/event9
S: char/13:73
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input9/event9
E: MAJOR=13
E: MINOR=73
E: DEVNAME=/dev/input/event9
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: x11_driver=synaptics
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:73 /dev/input/by-path/platform-i8042-serio-1-event-mouse

DRM Information from dmesg:
[    0.533444] Linux agpgart interface v0.103
[    0.860493] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[    0.860763] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[    0.872501] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[    1.013590] [drm] Initialized drm 1.1.0 20060810
[    1.052897] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-2-amd64 (SMP w/1 CPU core)
Locale: LANG=gl_ES.UTF-8, LC_CTYPE=gl_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages xserver-xorg-video-intel depends on:
ii  libc6                         2.10.2-6   Embedded GNU C Library: Shared lib
ii  libdrm-intel1                 2.4.17-1   Userspace interface to intel-speci
ii  libdrm2                       2.4.17-1   Userspace interface to kernel DRM 
ii  libpciaccess0                 0.11.0-1   Generic PCI access library for X
ii  libxext6                      2:1.1.1-2  X11 miscellaneous extension librar
ii  libxfixes3                    1:4.0.4-1  X11 miscellaneous 'fixes' extensio
ii  libxv1                        2:1.0.5-1  X11 Video extension library
ii  libxvmc1                      2:1.0.5-1  X11 Video extension library
ii  xserver-xorg-core             2:1.7.5-1  Xorg X server - core server

xserver-xorg-video-intel recommends no packages.

xserver-xorg-video-intel suggests no packages.

-- no debconf information
Reply to:
Follow-Ups:
- Bug#571741: System freezes after pm-hibernate when kms is on
  - From: Cyril Brulebois <kibi@debian.org>
Prev by Date: Processed: Re: Bug#481092: X Font Server crashing
Next by Date: Bug#570766: System hangs on X startup (855GM, KMS disabled)
Previous by thread: Processed: Re: Bug#481092: X Font Server crashing
Next by thread: Bug#571741: System freezes after pm-hibernate when kms is on
Index(es):
- Date
- Thread