xserver crash
Dear debian X maintainers!
I am using debian squeeze on my old notebook. It is a fujitsu amilo m7405,
with intel graphics chipset. I've just upgraded my debian, after 2 or
three months, and after that, the X server cannot start with the intel
driver, the whole machone just crashes. It would be nice to solve this
problem, as I love my laptop, dont want to buy a new one. And I would like
to use debian squeeze too, as it is only a desktop machine.
So unfortunately I cannot tell which latest xserver-xorg-video-intel
package version did work fine. The only I know is that lenny's xserver
starts up fine.
Please let me know how could I help in this case.
Regards,
Kojedzinszky Richard
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003efd0000 (usable)
[ 0.000000] BIOS-e820: 000000003efd0000 - 000000003efdf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003efdf000 - 000000003f000000 (ACPI NVS)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x3efd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 020000000 mask FF0000000 write-back
[ 0.000000] 2 base 030000000 mask FF8000000 write-back
[ 0.000000] 3 base 038000000 mask FFC000000 write-back
[ 0.000000] 4 base 03C000000 mask FFE000000 write-back
[ 0.000000] 5 base 03E000000 mask FFF000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 2f139000 - 2f41bf25
[ 0.000000] ACPI: RSDP 000f6790 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 3efd0000 00034 (v01 A M I OEMRSDT 01000525 MSFT 00000097)
[ 0.000000] ACPI: FACP 3efd0200 00081 (v02 A M I OEMFACP 01000525 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3efd03f0 03714 (v01 UW F07_____ 00000001 INTL 02002026)
[ 0.000000] ACPI: FACS 3efdf000 00040
[ 0.000000] ACPI: APIC 3efd0390 00054 (v01 A M I OEMAPIC 01000525 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3efdf040 00040 (v01 A M I AMI_OEM 01000525 MSFT 00000097)
[ 0.000000] ACPI: SSDT 3efd3b10 00394 (v01 AMI CPU1PM 00000001 INTL 02002026)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 123MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014a1334] TEXT DATA BSS ==> [0001000000 - 00014a1334]
[ 0.000000] #4 [002f139000 - 002f41bf25] RAMDISK ==> [002f139000 - 002f41bf25]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00014a2000 - 00014a8101] BRK ==> [00014a2000 - 00014a8101]
[ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003efd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003efd0
[ 0.000000] On node 0 totalpages: 257887
[ 0.000000] free_area_init_node: node 0, pgdat c138edc0, node_mem_map c14aa200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 248 pages used for memmap
[ 0.000000] HighMem zone: 31450 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f000000 (gap: 3f000000:c1000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34072 r0 d23272 u4194304
[ 0.000000] pcpu-alloc: s34072 r0 d23272 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255871
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-trunk-686 root=/dev/mapper/vg0-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003efd0)
[ 0.000000] Memory: 1014360k/1032000k available (2414k kernel code, 16688k reserved, 1266k data, 368k init, 126792k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc1399000 - 0xc13f5000 ( 368 kB)
[ 0.000000] .data : 0xc125bb11 - 0xc1398560 (1266 kB)
[ 0.000000] .text : 0xc1000000 - 0xc125bb11 (2414 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1500.062 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3000.12 BogoMIPS (lpj=6000248)
[ 0.004025] Security Framework initialized
[ 0.004034] SELinux: Disabled at boot.
[ 0.004042] Mount-cache hash table entries: 512
[ 0.004187] Initializing cgroup subsys ns
[ 0.004193] Initializing cgroup subsys cpuacct
[ 0.004198] Initializing cgroup subsys devices
[ 0.004201] Initializing cgroup subsys freezer
[ 0.004203] Initializing cgroup subsys net_cls
[ 0.004232] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008004] CPU: L2 cache: 2048K
[ 0.008010] mce: CPU supports 5 MCE banks
[ 0.008022] CPU0: Thermal monitoring enabled (TM2)
[ 0.008034] Performance Events: p6 PMU driver.
[ 0.008041] ... version: 0
[ 0.008044] ... bit width: 32
[ 0.008046] ... generic registers: 2
[ 0.008048] ... value mask: 00000000ffffffff
[ 0.008051] ... max period: 000000007fffffff
[ 0.008053] ... fixed-purpose events: 0
[ 0.008056] ... event mask: 0000000000000003
[ 0.008060] Checking 'hlt' instruction... OK.
[ 0.024410] SMP alternatives: switching to UP code
[ 0.028682] Freeing SMP alternatives: 13k freed
[ 0.028690] ACPI: Core revision 20090903
[ 0.036380] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.076712] CPU0: Intel(R) Pentium(R) M processor 1.50GHz stepping 08
[ 0.080001] Brought up 1 CPUs
[ 0.080001] Total of 1 processors activated (3000.12 BogoMIPS).
[ 0.080001] CPU0 attaching NULL sched-domain.
[ 0.080001] devtmpfs: initialized
[ 0.080001] regulator: core version 0.5
[ 0.080001] NET: Registered protocol family 16
[ 0.080001] ACPI: bus type pci registered
[ 0.080001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 0.080001] PCI: Using configuration type 1 for base access
[ 0.080001] bio: create slab <bio-0> at 0
[ 0.080001] ACPI: EC: Look up EC in DSDT
[ 0.080001] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.083940] ACPI: Interpreter enabled
[ 0.083952] ACPI: (supports S0 S3 S4 S5)
[ 0.083977] ACPI: Using IOAPIC for interrupt routing
[ 0.089892] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.090065] ACPI: No dock devices found.
[ 0.090160] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.090307] pci 0000:00:02.0: reg 10 32bit mmio pref: [0xd8000000-0xdfffffff]
[ 0.090313] pci 0000:00:02.0: reg 14 32bit mmio: [0xe0380000-0xe03fffff]
[ 0.090319] pci 0000:00:02.0: reg 18 io port: [0xec00-0xec07]
[ 0.090339] pci 0000:00:02.0: supports D1
[ 0.090358] pci 0000:00:02.1: reg 10 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.090365] pci 0000:00:02.1: reg 14 32bit mmio: [0xe0300000-0xe037ffff]
[ 0.090386] pci 0000:00:02.1: supports D1
[ 0.092011] pci 0000:00:1d.0: reg 20 io port: [0xe480-0xe49f]
[ 0.092062] pci 0000:00:1d.1: reg 20 io port: [0xe800-0xe81f]
[ 0.092111] pci 0000:00:1d.2: reg 20 io port: [0xe880-0xe89f]
[ 0.092167] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe02ffc00-0xe02fffff]
[ 0.092220] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.092226] pci 0000:00:1d.7: PME# disabled
[ 0.092307] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
[ 0.092312] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO
[ 0.092335] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.092343] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.092350] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.092357] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.092365] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.092373] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.092420] pci 0000:00:1f.3: reg 20 io port: [0xdc00-0xdc1f]
[ 0.092461] pci 0000:00:1f.5: reg 10 io port: [0xe000-0xe0ff]
[ 0.092468] pci 0000:00:1f.5: reg 14 io port: [0xe400-0xe43f]
[ 0.092475] pci 0000:00:1f.5: reg 18 32bit mmio: [0xe02ff800-0xe02ff9ff]
[ 0.092482] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe02ff400-0xe02ff4ff]
[ 0.092509] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.092514] pci 0000:00:1f.5: PME# disabled
[ 0.092557] pci 0000:01:03.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.092574] pci 0000:01:03.0: supports D1 D2
[ 0.092577] pci 0000:01:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.092582] pci 0000:01:03.0: PME# disabled
[ 0.092613] pci 0000:01:03.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.092630] pci 0000:01:03.1: supports D1 D2
[ 0.092633] pci 0000:01:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.092638] pci 0000:01:03.1: PME# disabled
[ 0.092669] pci 0000:01:03.2: reg 10 32bit mmio: [0xe00ff000-0xe00fffff]
[ 0.092710] pci 0000:01:03.2: supports D1 D2
[ 0.092713] pci 0000:01:03.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.092718] pci 0000:01:03.2: PME# disabled
[ 0.092756] pci 0000:01:07.0: reg 10 32bit mmio: [0xe00e0000-0xe00effff]
[ 0.092825] pci 0000:01:0a.0: reg 10 32bit mmio: [0xe00fd800-0xe00fdfff]
[ 0.092833] pci 0000:01:0a.0: reg 14 32bit mmio: [0xe00f8000-0xe00fbfff]
[ 0.092869] pci 0000:01:0a.0: supports D1 D2
[ 0.092872] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot
[ 0.092877] pci 0000:01:0a.0: PME# disabled
[ 0.092907] pci 0000:01:0c.0: reg 10 io port: [0xc800-0xc8ff]
[ 0.092915] pci 0000:01:0c.0: reg 14 32bit mmio: [0xe00fd400-0xe00fd4ff]
[ 0.092950] pci 0000:01:0c.0: supports D1 D2
[ 0.092953] pci 0000:01:0c.0: PME# supported from D1 D2 D3hot D3cold
[ 0.092958] pci 0000:01:0c.0: PME# disabled
[ 0.092982] pci 0000:00:1e.0: transparent bridge
[ 0.092988] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.092993] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xe00fffff]
[ 0.093032] pci_bus 0000:00: on NUMA node 0
[ 0.093038] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.093149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.148707] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.148865] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.152085] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.152239] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.152393] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.152552] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.152707] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.152863] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.152997] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.153008] vgaarb: loaded
[ 0.153078] PCI: Using ACPI for IRQ routing
[ 0.153243] Switching to clocksource tsc
[ 0.154904] pnp: PnP ACPI init
[ 0.154915] ACPI: bus type pnp registered
[ 0.160654] pnp: PnP ACPI: found 10 devices
[ 0.160657] ACPI: ACPI bus type pnp unregistered
[ 0.160662] PnPBIOS: Disabled by ACPI PNP
[ 0.160676] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.160681] system 00:07: ioport range 0x400-0x47f has been reserved
[ 0.160685] system 00:07: ioport range 0x500-0x53f has been reserved
[ 0.160692] system 00:08: ioport range 0x1100-0x113f has been reserved
[ 0.160696] system 00:08: ioport range 0x1254-0x1254 has been reserved
[ 0.160701] system 00:08: ioport range 0x12d4-0x12d4 has been reserved
[ 0.160705] system 00:08: ioport range 0x1300-0x1375 has been reserved
[ 0.160709] system 00:08: ioport range 0x1377-0x137f has been reserved
[ 0.160713] system 00:08: ioport range 0x200-0x20f has been reserved
[ 0.160718] system 00:08: ioport range 0x860-0x86f has been reserved
[ 0.160723] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.160727] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.160732] system 00:08: iomem range 0xfec10000-0xfec1ffff has been reserved
[ 0.160736] system 00:08: iomem range 0xffe80000-0xffefffff has been reserved
[ 0.160741] system 00:08: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.160745] system 00:08: iomem range 0xfee00400-0xffbfffff could not be reserved
[ 0.160750] system 00:08: iomem range 0xfff00000-0xfff7ffff has been reserved
[ 0.160757] system 00:09: iomem range 0x0-0x9ffff could not be reserved
[ 0.160762] system 00:09: iomem range 0xe0000-0xfffff could not be reserved
[ 0.160766] system 00:09: iomem range 0x100000-0x3effffff could not be reserved
[ 0.195508] pci 0000:01:03.0: CardBus bridge, secondary bus 0000:02
[ 0.195512] pci 0000:01:03.0: IO window: 0x00c000-0x00c0ff
[ 0.195517] pci 0000:01:03.0: IO window: 0x00c400-0x00c4ff
[ 0.195522] pci 0000:01:03.0: PREFETCH window: 0x40000000-0x43ffffff
[ 0.195528] pci 0000:01:03.0: MEM window: 0x4c000000-0x4fffffff
[ 0.195533] pci 0000:01:03.1: CardBus bridge, secondary bus 0000:06
[ 0.195536] pci 0000:01:03.1: IO window: 0x00cc00-0x00ccff
[ 0.195541] pci 0000:01:03.1: IO window: 0x001000-0x0010ff
[ 0.195546] pci 0000:01:03.1: PREFETCH window: 0x44000000-0x47ffffff
[ 0.195552] pci 0000:01:03.1: MEM window: 0x50000000-0x53ffffff
[ 0.195557] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.195561] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.195567] pci 0000:00:1e.0: MEM window: 0xe0000000-0xe00fffff
[ 0.195573] pci 0000:00:1e.0: PREFETCH window: 0x40000000-0x47ffffff
[ 0.195585] pci 0000:00:1e.0: setting latency timer to 64
[ 0.195599] pci 0000:01:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.195609] pci 0000:01:03.1: enabling device (0000 -> 0003)
[ 0.195614] pci 0000:01:03.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.195622] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.195626] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.195630] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.195634] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe00fffff]
[ 0.195638] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x47ffffff]
[ 0.195641] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.195645] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.195649] pci_bus 0000:02: resource 0 io: [0xc000-0xc0ff]
[ 0.195652] pci_bus 0000:02: resource 1 io: [0xc400-0xc4ff]
[ 0.195656] pci_bus 0000:02: resource 2 pref mem [0x40000000-0x43ffffff]
[ 0.195660] pci_bus 0000:02: resource 3 mem: [0x4c000000-0x4fffffff]
[ 0.195663] pci_bus 0000:06: resource 0 io: [0xcc00-0xccff]
[ 0.195667] pci_bus 0000:06: resource 1 io: [0x1000-0x10ff]
[ 0.195670] pci_bus 0000:06: resource 2 pref mem [0x44000000-0x47ffffff]
[ 0.195674] pci_bus 0000:06: resource 3 mem: [0x50000000-0x53ffffff]
[ 0.195709] NET: Registered protocol family 2
[ 0.195809] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.196176] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.197373] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.198213] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.198217] TCP reno registered
[ 0.198369] NET: Registered protocol family 1
[ 0.198402] pci 0000:00:02.0: Boot video device
[ 0.198551] Unpacking initramfs...
[ 0.310168] Freeing initrd memory: 2955k freed
[ 0.313346] audit: initializing netlink socket (disabled)
[ 0.313368] type=2000 audit(1266796564.310:1): initialized
[ 0.313621] highmem bounce pool size: 64 pages
[ 0.313628] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.315534] VFS: Disk quotas dquot_6.5.2
[ 0.315617] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.315718] msgmni has been set to 1740
[ 0.315968] alg: No test for stdrng (krng)
[ 0.316039] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.316043] io scheduler noop registered
[ 0.316046] io scheduler anticipatory registered
[ 0.316048] io scheduler deadline registered
[ 0.316093] io scheduler cfq registered (default)
[ 0.316307] isapnp: Scanning for PnP cards...
[ 0.669886] isapnp: No Plug & Play device found
[ 0.671533] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.672024] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.676474] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 0.677290] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.677298] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.677336] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.677362] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.677387] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.677496] mice: PS/2 mouse device common for all mice
[ 0.677525] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 0.677599] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.677621] rtc0: alarms up to one month, 114 bytes nvram
[ 0.677637] cpuidle: using governor ladder
[ 0.677640] cpuidle: using governor menu
[ 0.677645] No iBFT detected.
[ 0.678087] TCP cubic registered
[ 0.678272] NET: Registered protocol family 10
[ 0.678850] lo: Disabled Privacy Extensions
[ 0.679230] Mobile IPv6
[ 0.679233] NET: Registered protocol family 17
[ 0.679253] Using IPI No-Shortcut mode
[ 0.679392] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.679675] registered taskstats version 1
[ 0.680016] rtc_cmos 00:02: setting system clock to 2010-02-21 23:56:05 UTC (1266796565)
[ 0.680065] Freeing unused kernel memory: 368k freed
[ 0.680354] Write protecting the kernel text: 2416k
[ 0.680379] Write protecting the kernel read-only data: 872k
[ 0.728211] Uniform Multi-Platform E-IDE driver
[ 0.729377] piix 0000:00:1f.1: IDE controller (0x8086:0x24ca rev 0x03)
[ 0.729390] PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.729407] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.729433] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 0.729439] ide0: BM-DMA at 0xffa0-0xffa7
[ 0.729447] ide1: BM-DMA at 0xffa8-0xffaf
[ 0.729454] Probing IDE interface ide0...
[ 1.014894] hda: WDC WD1600BEVE-00UYT0, ATA DISK drive
[ 1.688048] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 1.688112] hda: UDMA/100 mode selected
[ 1.688176] Probing IDE interface ide1...
[ 2.424139] hdc: _NEC DVD+/-RW ND-6500A, ATAPI CD/DVD-ROM drive
[ 3.096040] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.113272] hdc: UDMA/33 mode selected
[ 3.114823] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.160743] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.202920] SCSI subsystem initialized
[ 3.230754] libata version 3.00 loaded.
[ 3.254790] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.254800] ACPI: Thermal Zone [THRM] (11 C)
[ 3.418399] ide-gd driver 1.18
[ 3.418446] hda: max request size: 512KiB
[ 3.418625] ide-cd driver 5.00
[ 3.483498] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
[ 3.483614] hda: cache flushes supported
[ 3.483669] hda: hda1 hda2 hda3
[ 3.545696] ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 3.545706] Uniform CD-ROM driver Revision: 3.20
[ 3.849361] device-mapper: uevent: version 1.0.3
[ 3.849799] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 4.118326] PM: Starting manual resume from disk
[ 4.128517] REISERFS (device dm-0): found reiserfs format "3.6" with standard journal
[ 4.128531] REISERFS (device dm-0): using ordered data mode
[ 4.138131] REISERFS (device dm-0): journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 4.138520] REISERFS (device dm-0): checking transaction log (dm-0)
[ 4.161644] REISERFS (device dm-0): Using r5 hash to sort names
[ 4.694152] udev: starting version 151
[ 4.948139] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 4.948183] ACPI: Lid Switch [LID]
[ 4.948253] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 4.948259] ACPI: Sleep Button [SLPB]
[ 4.948322] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 4.948327] ACPI: Power Button [PWRB]
[ 4.948396] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.948401] ACPI: Power Button [PWRF]
[ 5.014513] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.055407] ACPI: Battery Slot [BAT0] (battery present)
[ 5.055586] Linux agpgart interface v0.103
[ 5.057929] Marking TSC unstable due to TSC halts in idle
[ 5.058780] processor LNXCPU:00: registered as cooling_device0
[ 5.062779] Switching to clocksource acpi_pm
[ 5.075954] agpgart-intel 0000:00:00.0: Intel 855GM Chipset
[ 5.076974] agpgart-intel 0000:00:00.0: detected 16252K stolen memory
[ 5.080457] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd8000000
[ 5.088463] ACPI: AC Adapter [AC0] (on-line)
[ 5.090035] intel_rng: FWH not detected
[ 5.184046] usbcore: registered new interface driver usbfs
[ 5.184177] usbcore: registered new interface driver hub
[ 5.184304] usbcore: registered new device driver usb
[ 5.193118] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.193447] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.196480] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input5
[ 5.196598] ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
[ 5.223475] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.223521] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 5.223542] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.223547] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.223583] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 5.223616] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.227508] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.227528] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe02ffc00
[ 5.241903] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 5.244055] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.244092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.244096] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.244100] usb usb1: Product: EHCI Host Controller
[ 5.244103] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd
[ 5.244106] usb usb1: SerialNumber: 0000:00:1d.7
[ 5.244234] usb usb1: configuration #1 chosen from 1 choice
[ 5.244313] hub 1-0:1.0: USB hub found
[ 5.244324] hub 1-0:1.0: 6 ports detected
[ 5.247698] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.247826] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.247837] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.247841] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.247852] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 5.247890] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e480
[ 5.247928] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.247932] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.247936] usb usb2: Product: UHCI Host Controller
[ 5.247939] usb usb2: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 5.247942] usb usb2: SerialNumber: 0000:00:1d.0
[ 5.248407] usb usb2: configuration #1 chosen from 1 choice
[ 5.248496] hub 2-0:1.0: USB hub found
[ 5.248505] hub 2-0:1.0: 2 ports detected
[ 5.248560] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.248568] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.248572] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.248581] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 5.248609] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[ 5.248646] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.248650] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.248653] usb usb3: Product: UHCI Host Controller
[ 5.248656] usb usb3: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 5.248660] usb usb3: SerialNumber: 0000:00:1d.1
[ 5.249060] usb usb3: configuration #1 chosen from 1 choice
[ 5.249148] hub 3-0:1.0: USB hub found
[ 5.249158] hub 3-0:1.0: 2 ports detected
[ 5.249210] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.249217] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.249221] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.249230] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 5.249258] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 5.249299] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.249303] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.249306] usb usb4: Product: UHCI Host Controller
[ 5.249309] usb usb4: Manufacturer: Linux 2.6.32-trunk-686 uhci_hcd
[ 5.249312] usb usb4: SerialNumber: 0000:00:1d.2
[ 5.249438] usb usb4: configuration #1 chosen from 1 choice
[ 5.249516] hub 4-0:1.0: USB hub found
[ 5.249525] hub 4-0:1.0: 2 ports detected
[ 5.368449] Error: Driver 'pcspkr' is already registered, aborting...
[ 5.410783] [drm] Initialized drm 1.1.0 20060810
[ 5.438164] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.438195] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 5.616561] 8139too Fast Ethernet driver 0.9.28
[ 5.616605] 8139too 0000:01:0c.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.617926] eth0: RealTek RTL8139 at 0xc800, 00:03:0d:24:7a:13, IRQ 19
[ 5.632885] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x6eb1, caps: 0xa04711/0x40a
[ 5.672241] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 5.737388] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.737395] pci 0000:00:02.0: setting latency timer to 64
[ 5.741704] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.752826] yenta_cardbus 0000:01:03.0: CardBus bridge found [1734:106a]
[ 5.752845] yenta_cardbus 0000:01:03.0: O2: res at 0x94/0xD4: 00/ea
[ 5.752848] yenta_cardbus 0000:01:03.0: O2: enabling read prefetch/write burst
[ 5.760039] intel8x0_measure_ac97_clock: measured 53623 usecs (2584 samples)
[ 5.760043] intel8x0: clocking to 48000
[ 5.768730] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 5.822405] cfg80211: Using static regulatory domain info
[ 5.822409] cfg80211: Regulatory domain: US
[ 5.822412] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5.822416] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 5.822420] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.822424] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.822427] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.822431] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 5.822435] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 5.822598] cfg80211: Calling CRDA for country: US
[ 5.881164] yenta_cardbus 0000:01:03.0: ISA IRQ mask 0x0cb8, PCI irq 17
[ 5.881169] yenta_cardbus 0000:01:03.0: Socket status: 30000006
[ 5.881174] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05
[ 5.881184] yenta_cardbus 0000:01:03.0: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
[ 5.881190] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xcfff: clean.
[ 5.881493] yenta_cardbus 0000:01:03.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe00fffff
[ 5.881498] yenta_cardbus 0000:01:03.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
[ 5.881979] firewire_ohci 0000:01:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.952022] firewire_ohci: Added fw-ohci device 0000:01:0a.0, OHCI version 1.10
[ 5.952372] ath5k 0000:01:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 5.952404] ath5k 0000:01:07.0: registered as 'phy0'
[ 6.481026] firewire_core: created device fw0: GUID 00030d4925533be2, S400
[ 6.567967] ath: EEPROM regdomain: 0x0
[ 6.567971] ath: EEPROM indicates default country code should be used
[ 6.567973] ath: doing EEPROM country->regdmn map search
[ 6.567977] ath: country maps to regdmn code: 0x3a
[ 6.567980] ath: Country alpha2 being used: US
[ 6.567982] ath: Regpair used: 0x3a
[ 6.580242] phy0: Selected rate control algorithm 'minstrel'
[ 6.581036] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa5, PHY: 0x61)
[ 6.581246] cfg80211: Calling CRDA for country: US
[ 6.581291] yenta_cardbus 0000:01:03.1: CardBus bridge found [1734:106a]
[ 6.709360] yenta_cardbus 0000:01:03.1: ISA IRQ mask 0x0cb8, PCI irq 17
[ 6.709365] yenta_cardbus 0000:01:03.1: Socket status: 30000006
[ 6.709371] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #05 to #09
[ 6.709382] yenta_cardbus 0000:01:03.1: pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
[ 6.709387] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc000-0xcfff: clean.
[ 6.709690] yenta_cardbus 0000:01:03.1: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe00fffff
[ 6.709695] yenta_cardbus 0000:01:03.1: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
[ 7.328565] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[ 7.330165] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 7.330564] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 7.331109] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 7.331864] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 7.332767] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 7.334363] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 7.334761] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 7.335305] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 7.336244] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 8.629561] Adding 2000084k swap on /dev/hda2. Priority:-1 extents:1 across:2000084k
[ 8.856070] loop: module loaded
[ 8.988952] REISERFS (device hda1): found reiserfs format "3.6" with standard journal
[ 8.989013] REISERFS (device hda1): using ordered data mode
[ 8.989333] REISERFS (device hda1): journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 8.989752] REISERFS (device hda1): checking transaction log (hda1)
[ 9.007181] REISERFS (device hda1): Using r5 hash to sort names
[ 9.018842] REISERFS (device dm-4): found reiserfs format "3.6" with standard journal
[ 9.018871] REISERFS (device dm-4): using ordered data mode
[ 9.031966] REISERFS (device dm-4): journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 9.032434] REISERFS (device dm-4): checking transaction log (dm-4)
[ 9.049080] REISERFS (device dm-4): Using r5 hash to sort names
[ 9.061764] REISERFS (device dm-1): found reiserfs format "3.6" with standard journal
[ 9.061816] REISERFS (device dm-1): using ordered data mode
[ 9.074155] REISERFS (device dm-1): journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 9.074707] REISERFS (device dm-1): checking transaction log (dm-1)
[ 9.090914] REISERFS (device dm-1): Using r5 hash to sort names
[ 9.100708] REISERFS (device dm-3): found reiserfs format "3.6" with standard journal
[ 9.100784] REISERFS (device dm-3): using ordered data mode
[ 9.113092] REISERFS (device dm-3): journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 9.113673] REISERFS (device dm-3): checking transaction log (dm-3)
[ 9.152510] REISERFS (device dm-3): Using r5 hash to sort names
[ 9.189913] REISERFS (device dm-2): found reiserfs format "3.6" with standard journal
[ 9.189996] REISERFS (device dm-2): using ordered data mode
[ 9.204379] REISERFS (device dm-2): journal params: device dm-2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 9.204953] REISERFS (device dm-2): checking transaction log (dm-2)
[ 9.242215] REISERFS (device dm-2): Using r5 hash to sort names
[ 10.852906] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 20.860227] eth0: no IPv6 routers present
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, fast devsel, latency 0
Memory at <unassigned> (32-bit, prefetchable)
Capabilities: [40] Vendor Specific Information: Len=05 <?>
Kernel driver in use: agpgart-intel
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, fast devsel, latency 0
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, fast devsel, latency 0
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Memory at e0380000 (32-bit, non-prefetchable) [size=512K]
I/O ports at ec00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 1
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, fast devsel, latency 0
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Memory at e0300000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at e480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at e800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at e880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at e02ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=0080
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=09, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e0000000-e00fffff
Prefetchable memory behind bridge: 40000000-47ffffff
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ffa0 [size=16]
Memory at 48000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: medium devsel, IRQ 17
I/O ports at dc00 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at e000 [size=256]
I/O ports at e400 [size=64]
Memory at e02ff800 (32-bit, non-prefetchable) [size=512]
Memory at e02ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: Intel ICH
01:03.0 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, stepping, slow devsel, latency 168, IRQ 17
Memory at e0000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 40000000-43fff000 (prefetchable)
Memory window 1: 4c000000-4ffff000
I/O window 0: 0000c000-0000c0ff
I/O window 1: 0000c400-0000c4ff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
01:03.1 CardBus bridge: O2 Micro, Inc. OZ711M1/MC1 4-in-1 MemoryCardBus Controller (rev 20)
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, stepping, slow devsel, latency 168, IRQ 17
Memory at e0001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 44000000-47fff000 (prefetchable)
Memory window 1: 50000000-53fff000
I/O window 0: 0000cc00-0000ccff
I/O window 1: 00001000-000010ff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
01:03.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: slow devsel, IRQ 3
Memory at e00ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [a0] Power Management version 2
01:07.0 Ethernet controller: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01)
Subsystem: Device 19b6:0014
Flags: bus master, medium devsel, latency 168, IRQ 19
Memory at e00e0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Kernel driver in use: ath5k
01:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at e00fd800 (32-bit, non-prefetchable) [size=2K]
Memory at e00f8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Kernel driver in use: firewire_ohci
01:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Fujitsu Technology Solutions Device 106a
Flags: bus master, medium devsel, latency 64, IRQ 19
I/O ports at c800 [size=256]
Memory at e00fd400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: 8139too
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Név Verzió LeÃrás
+++-====================================-========================-============================================
ii acpi 1.4-2 displays information on ACPI devices
ii acpi-support-base 0.132-2 scripts for handling base ACPI events such a
ii acpid 1:2.0.2-1 Advanced Configuration and Power Interface e
ii adduser 3.112 add and remove users and groups
ii apt 0.7.25.3 Advanced front-end for dpkg
ii apt-utils 0.7.25.3 APT utility programs
ii apt-xapian-index 0.23 maintenance tools for a Xapian index of Debi
ii aptitude 0.6.1.5-2 terminal-based package manager (terminal int
ii aspell 0.60.6-3 GNU Aspell spell-checker
ii aspell-hu 0.99.4.2-0-3 Hungarian dictionary for aspell
ii base-files 5.1 Debian base system miscellaneous files
ii base-passwd 3.5.22 Debian base system master password and group
ii bash 4.1-1 The GNU Bourne Again SHell
ii bsdmainutils 8.0.8 collection of more utilities from FreeBSD
ii bsdutils 1:2.16.2-0 Basic utilities from 4.4BSD-Lite
ii busybox 1:1.14.2-2 Tiny utilities for small and embedded system
ii console-setup 1.53 console font and keymap setup program
ii console-terminus 4.30-2 Fixed-width fonts for fast reading on the Li
ii coreutils 8.4-1 GNU core utilities
ii cpio 2.10-1 GNU cpio -- a program to manage archives of
ii cpp 4:4.4.2-3 The GNU C preprocessor (cpp)
ii cpp-4.4 4.4.3-2 The GNU C preprocessor
ii cron 3.0pl1-106 process scheduling daemon
ii dash 0.5.5.1-3 POSIX-compliant shell
ii debconf 1.5.28 Debian configuration management system
ii debconf-i18n 1.5.28 full internationalization support for debcon
ii debian-archive-keyring 2009.01.31 GnuPG archive keys of the Debian archive
ii debianutils 3.2.2 Miscellaneous utilities specific to Debian
ii dhcp3-client 3.1.3-2 DHCP client
ii dhcp3-common 3.1.3-2 common files used by all the dhcp3* packages
ii dictionaries-common 1.5.0 Common utilities for spelling dictionary too
ii diffutils 1:2.9-2 File comparison utilities
ii dmidecode 2.9-1.2 Dump Desktop Management Interface data
ii dmsetup 2:1.02.39-1 The Linux Kernel Device Mapper userspace lib
ii dpkg 1.15.5.6 Debian package management system
ii e2fslibs 1.41.10-1 ext2/ext3/ext4 file system libraries
ii e2fsprogs 1.41.10-1 ext2/ext3/ext4 file system utilities
ii ed 1.4-1 The classic UNIX line editor
ii eject 2.1.5+deb1+cvs20081104-7 ejects CDs and operates CD-Changers under Li
ii file 5.04-1 Determines file type using "magic" numbers
ii findutils 4.4.2-1 utilities for finding files--find, xargs
ii firmware-linux-free 2.6.32-8 Binary firmware for various drivers in the L
ii fortune-mod 1:1.99.1-4 provides fortune cookies on demand
ii fortunes-debian-hints 1.93 Debian Hints for fortune
ii gcc-4.4-base 4.4.3-2 The GNU Compiler Collection (base package)
ii gettext-base 0.17-9 GNU Internationalization utilities for the b
ii gnupg 1.4.10-2 GNU privacy guard - a free PGP replacement
ii gpgv 1.4.10-2 GNU privacy guard - signature verification t
ii grep 2.5.4-4 GNU grep, egrep and fgrep
ii groff-base 1.20.1-7 GNU troff text-formatting system (base syste
ii grub-common 1.98~20100128-1.2 GRand Unified Bootloader, version 2 (common
ii grub-pc 1.98~20100128-1.2 GRand Unified Bootloader, version 2 (PC/BIOS
ii gzip 1.3.12-9 GNU compression utilities
ii heirloom-mailx 12.4-1.1+b1 feature-rich BSD mail(1)
ii hostname 3.03 utility to set/show the host name or domain
ii hunspell 1.2.8-6 spell checker and morphological analyzer (pr
ii ifupdown 0.6.9 high level tools to configure network interf
ii ihungarian 0.99.4-1.2 The Hungarian dictionary for ispell
ii info 4.13a.dfsg.1-5 Standalone GNU Info documentation browser
ii initramfs-tools 0.93.4 tools for generating an initramfs
ii initscripts 2.87dsf-8.1 scripts for initializing and shutting down t
ii insserv 1.12.0-14 Tool to organize boot sequence using LSB ini
ii install-info 4.13a.dfsg.1-5 Manage installed documentation in info forma
ii installation-report 2.39 system installation report
ii iproute 20091226-1 networking and traffic control tools
ii iptables 1.4.6-2 administration tools for packet filtering an
ii iputils-ping 3:20071127-2 Tools to test the reachability of network ho
ii iso-codes 3.13-1 ISO language, territory, currency, script co
ii ispell 3.1.20.0-7 International Ispell (an interactive spellin
ii javascript-common 7 Base support for javascript library packages
ii kbd 1.15.1-3 Linux console font and keytable utilities
ii keyboard-configuration 1.53 system-wide keyboard preferences
ii klibc-utils 1.5.15-1 small utilities built with klibc for early b
ii laptop-detect 0.13.7 attempt to detect a laptop
ii less 436-1 pager program similar to more
ii libacl1 2.2.49-2 Access control list shared library
ii libapr1 1.4.2-3 The Apache Portable Runtime Library
ii libaprutil1 1.3.9+dfsg-3 The Apache Portable Runtime Utility Library
ii libaspell15 0.60.6-3 GNU Aspell spell-checker runtime library
ii libattr1 1:2.4.44-1 Extended attribute shared library
ii libaudit0 1.7.13-1+b1 Dynamic library for security auditing
ii libblkid1 2.16.2-0 block device id library
ii libboost-iostreams1.40.0 1.40.0-6+b1 Boost.Iostreams Library
ii libbsd0 0.2.0-1 utility functions from BSD systems - shared
ii libbz2-1.0 1.0.5-4 high-quality block-sorting file compressor l
ii libc-bin 2.10.2-5 Embedded GNU C Library: Binaries
ii libc6 2.10.2-5 Embedded GNU C Library: Shared libraries
ii libc6-i686 2.10.2-5 GNU C Library: Shared libraries [i686 optimi
ii libcomerr2 1.41.10-1 common error description library
ii libcwidget3 0.5.16-3 high-level terminal interface library for C+
ii libdb4.5 4.5.20-13.1 Berkeley v4.5 Database Libraries [runtime]
ii libdb4.8 4.8.26-1 Berkeley v4.8 Database Libraries [runtime]
ii libdevmapper1.02.1 2:1.02.39-1 The Linux Kernel Device Mapper userspace lib
ii libdrm-intel1 2.4.18-1 Userspace interface to intel-specific kernel
ii libdrm2 2.4.18-1 Userspace interface to kernel DRM services -
ii libedit2 2.11-20080614-1 BSD editline and history libraries
ii libept0 0.5.30 High-level library for managing Debian packa
ii libexpat1 2.0.1-7 XML parsing C library - runtime library
ii libfontenc1 1:1.0.5-1 X11 font encoding library
ii libfreetype6 2.3.11-1 FreeType 2 font engine, shared library files
ii libgcc1 1:4.4.3-2 GCC support library
ii libgcrypt11 1.4.5-2 LGPL Crypto library - runtime library
ii libgdbm3 1.8.3-9 GNU dbm database routines (runtime version)
ii libgl1-mesa-dri 7.6.1-1 A free implementation of the OpenGL API -- D
ii libgmp3c2 2:4.3.2+dfsg-1 Multiprecision arithmetic library
rc libgnutls26 2.8.5-2 the GNU TLS library - runtime library
ii libgpg-error0 1.6-1 library for common error values and messages
ii libgpm2 1.20.4-3.3 General Purpose Mouse - shared library
ii libgssapi-krb5-2 1.8+dfsg~alpha1-7 MIT Kerberos runtime libraries - krb5 GSS-AP
ii libhunspell-1.2-0 1.2.8-6 spell checker and morphological analyzer (sh
ii libice6 2:1.0.6-1 X11 Inter-Client Exchange library
ii libjs-jquery 1.4.1-1 JavaScript library for dynamic web applicati
ii libk5crypto3 1.8+dfsg~alpha1-7 MIT Kerberos runtime libraries - Crypto Libr
ii libkeyutils1 1.2-12 Linux Key Management Utilities (library)
ii libklibc 1.5.15-1 minimal libc subset for use with initramfs
ii libkrb5-3 1.8+dfsg~alpha1-7 MIT Kerberos runtime libraries
ii libkrb5support0 1.8+dfsg~alpha1-7 MIT Kerberos runtime libraries - Support lib
ii liblocale-gettext-perl 1.05-6 Using libc functions for internationalizatio
ii liblog4cxx10 0.10.0-1.1 A logging library for C++
ii libmagic1 5.04-1 File type determination library using "magic
ii libmpfr1ldbl 2.4.2-3 multiple precision floating-point computatio
ii libncurses5 5.7+20090803-2 shared libraries for terminal handling
ii libncursesw5 5.7+20090803-2 shared libraries for terminal handling (wide
ii libnewt0.52 0.52.10-5+b1 Not Erik's Windowing Toolkit - text mode win
ii libpam-modules 1.1.1-2 Pluggable Authentication Modules for PAM
ii libpam-runtime 1.1.1-2 Runtime support for the PAM library
ii libpam0g 1.1.1-2 Pluggable Authentication Modules library
ii libpci3 1:3.1.7-1 Linux PCI Utilities (shared library)
ii libpciaccess0 0.11.0-1 Generic PCI access library for X
rc libpcre3 7.8-3 Perl 5 Compatible Regular Expression Library
ii libpixman-1-0 0.16.4-1 pixel-manipulation library for X and cairo
ii libpopt0 1.15-1 lib for parsing cmdline parameters
ii libreadline5 5.2-7 GNU readline and history libraries, run-time
ii libreadline6 6.1-1 GNU readline and history libraries, run-time
ii librecode0 3.6-17 Shared library on which recode is based
ii libselinux1 2.0.89-4 SELinux runtime shared libraries
ii libsepol1 2.0.40-2 SELinux library for manipulating binary secu
ii libsigc++-2.0-0c2a 2.2.4.2-1 type-safe Signal Framework for C++ - runtime
ii libslang2 2.2.2-2 The S-Lang programming library - runtime ver
ii libsm6 2:1.1.1-1 X11 Session Management library
ii libsqlite3-0 3.6.22-1 SQLite 3 shared library
ii libss2 1.41.10-1 command-line interface parsing library
ii libssl0.9.8 0.9.8k-8 SSL shared libraries
ii libstdc++6 4.4.3-2 The GNU Standard C++ Library v3
ii libsysfs2 2.1.0-6 interface library to sysfs
ii libtasn1-3 2.4-1 Manage ASN.1 structures (runtime)
ii libtext-charwidth-perl 0.04-6 get display widths of characters on the term
ii libtext-iconv-perl 1.7-2 converts between character sets in Perl
ii libtext-wrapi18n-perl 0.06-7 internationalized substitute of Text::Wrap
ii libudev0 151-2 libudev shared library
ii libunwind7 0.99-0.2 A library to determine the call-chain of a p
ii libusb-0.1-4 2:0.1.12-14 userspace USB programming library
ii libuuid1 2.16.2-0 Universally Unique ID library
ii libwrap0 7.6.q-18 Wietse Venema's TCP wrappers library
ii libx11-6 2:1.3.3-1 X11 client-side library
ii libx11-data 2:1.3.3-1 X11 client-side library
ii libxapian15 1.0.18-1 Search engine library
ii libxau6 1:1.0.5-1 X11 authorisation library
ii libxaw7 2:1.0.7-1 X11 Athena Widget library
ii libxcb1 1.5-2 X C Binding
ii libxdmcp6 1:1.0.3-1 X11 Display Manager Control Protocol library
ii libxext6 2:1.1.1-2 X11 miscellaneous extension library
ii libxfixes3 1:4.0.4-1 X11 miscellaneous 'fixes' extension library
ii libxfont1 1:1.4.1-1 X11 font rasterisation library
ii libxi6 2:1.3-2 X11 Input extension library
ii libxkbfile1 1:1.0.6-1 X11 keyboard file manipulation library
ii libxmu6 2:1.0.5-1 X11 miscellaneous utility library
ii libxmuu1 2:1.0.5-1 X11 miscellaneous micro-utility library
ii libxpm4 1:3.5.8-1 X11 pixmap library
ii libxt6 1:1.0.7-1 X11 toolkit intrinsics library
ii libxv1 2:1.0.5-1 X11 Video extension library
ii libxvmc1 2:1.0.5-1 X11 Video extension library
ii linux-image-2.6-686 2.6.32+24 Linux 2.6 image on modern PCs
ii linux-image-2.6.32-2-686 2.6.32-8 Linux 2.6.32 for modern PCs
ii linux-image-2.6.32-trunk-686 2.6.32-5 Linux 2.6.32 for modern PCs
ii locales 2.10.2-5 Embedded GNU C Library: National Language (l
ii login 1:4.1.4.2-1 system login tools
ii logrotate 3.7.8-4 Log rotation utility
ii lsb-base 3.2-23 Linux Standard Base 3.2 init script function
ii lsb-release 3.2-23 Linux Standard Base version reporting utilit
ii lvm2 2.02.54-1 The Linux Logical Volume Manager
ii lzma 4.43-14 Compression method of 7z format in 7-Zip pro
ii man-db 2.5.7-1 on-line manual pager
ii manpages 3.23-1 Manual pages about using a GNU/Linux system
ii manpages-hu 20010119-5 Hungarian manpages
ii mawk 1.3.3-15 a pattern scanning and text processing langu
ii mime-support 3.48-1 MIME files 'mime.types' & 'mailcap', and sup
ii module-init-tools 3.12~pre1-1 tools for managing Linux kernel modules
ii mount 2.16.2-0 Tools for mounting and manipulating filesyst
ii myspell-hu 0.99.4-1.2 The Hungarian dictionary for myspell
ii nano 2.2.3-1 small, friendly text editor inspired by Pico
ii ncurses-base 5.7+20090803-2 basic terminal type definitions
ii ncurses-bin 5.7+20090803-2 terminal-related programs and man pages
ii net-tools 1.60-23 The NET-3 networking toolkit
ii netbase 4.40 Basic TCP/IP networking system
ii netcat-traditional 1.10-38 TCP/IP swiss army knife
ii openssh-blacklist 0.4.1 list of default blacklisted OpenSSH RSA and
ii openssh-blacklist-extra 0.4.1 list of non-default blacklisted OpenSSH RSA
ii openssh-client 1:5.3p1-1 secure shell (SSH) client, for secure access
ii openssh-server 1:5.3p1-1 secure shell (SSH) server, for secure access
ii os-prober 1.35 utility to detect other OSes on a set of dri
ii passwd 1:4.1.4.2-1 change and administer password and group dat
ii pciutils 1:3.1.7-1 Linux PCI Utilities
ii pcmciautils 015-1 PCMCIA utilities for Linux 2.6
ii perl-base 5.10.1-11 minimal Perl system
rc perl-modules 5.10.1-11 Core Perl modules
ii procps 1:3.2.8-7 /proc file system utilities
ii psmisc 22.10-1 utilities that use the proc file system
ii python 2.5.4-9 An interactive high-level object-oriented la
ii python-apt 0.7.93.1 Python interface to libapt-pkg
ii python-central 0.6.14+nmu2 register and build utility for Python packag
ii python-debian 0.1.14 Python modules to work with Debian-related d
ii python-minimal 2.5.4-9 A minimal subset of the Python language (def
ii python-reportbug 4.10.2 Python modules for interacting with bug trac
ii python-support 1.0.6 automated rebuilding support for Python modu
ii python-xapian 1.0.18-1 Xapian search engine interface for Python
ii python2.5 2.5.5-2 An interactive high-level object-oriented la
ii python2.5-minimal 2.5.5-2 A minimal subset of the Python language (ver
ii readline-common 6.1-1 GNU readline and history libraries, common f
ii reiserfsprogs 1:3.6.21-1 User-level tools for ReiserFS filesystems
ii reportbug 4.10.2 reports bugs in the Debian distribution
ii rsyslog 4.4.2-2 enhanced multi-threaded syslogd
ii sed 4.2.1-6 The GNU sed stream editor
ii sensible-utils 0.0.2 Utilities for sensible alternative selection
ii ssh 1:5.3p1-1 secure shell client and server (metapackage)
ii sysv-rc 2.87dsf-8.1 System-V-like runlevel change mechanism
ii sysvinit 2.87dsf-8.1 System-V-like init utilities
ii sysvinit-utils 2.87dsf-8.1 System-V-like utilities
ii tar 1.22-2 GNU version of the tar archiving utility
ii tasksel 2.81 Tool for selecting tasks for installation on
ii tasksel-data 2.81 Official tasks used for installation of Debi
ii traceroute 1:2.0.13-3 Traces the route taken by packets over an IP
ii tzdata 2010b-1 time zone and daylight-saving time data
ii ucf 3.0025 Update Configuration File: preserve user cha
ii udev 151-2 /dev/ and hotplug management daemon
ii usbutils 0.86-4 Linux USB utilities
ii util-linux 2.16.2-0 Miscellaneous system utilities
ii vim 2:7.2.330-1 Vi IMproved - enhanced vi editor
ii vim-common 2:7.2.330-1 Vi IMproved - Common files
ii vim-runtime 2:7.2.330-1 Vi IMproved - Runtime files
ii vim-tiny 2:7.2.330-1 Vi IMproved - enhanced vi editor - compact v
ii wfinnish 0.7-17.3 A small Finnish dictionary for /usr/share/di
ii wget 1.12-1.1 retrieves files from the web
ii whiptail 0.52.10-5+b1 Displays user-friendly dialog boxes from she
ii wwwconfig-common 0.2.1 Debian web auto configuration
ii x11-common 1:7.5+3 X Window System (X.Org) infrastructure
ii x11-xkb-utils 7.5+1 X11 XKB utilities
ii xauth 1:1.0.4-1 X authentication utility
ii xfonts-base 1:1.0.1 standard fonts for X
ii xfonts-encodings 1:1.0.3-1 Encodings for X.Org fonts
ii xfonts-utils 1:7.5+2 X Window System font utility programs
ii xkb-data 1.7-2 X Keyboard Extension (XKB) configuration dat
ii xserver-common 2:1.7.5-1 common files used by various X servers
ii xserver-xorg 1:7.5+3 the X.Org X server
ii xserver-xorg-core 2:1.7.5-1 Xorg X server - core server
ii xserver-xorg-input-all 1:7.5+3 the X.Org X server -- input driver metapacka
ii xserver-xorg-input-evdev 1:2.3.2-3 X.Org X server -- evdev input driver
ii xserver-xorg-input-synaptics 1.2.1-1 Synaptics TouchPad driver for X.Org server
ii xserver-xorg-input-wacom 0.10.3+20100109-1 X.Org X server -- Wacom input driver
ii xserver-xorg-video-all 1:7.5+3 the X.Org X server -- output driver metapack
ii xserver-xorg-video-apm 1:1.2.2-1 X.Org X server -- APM display driver
ii xserver-xorg-video-ark 1:0.7.2-1 X.Org X server -- ark display driver
ii xserver-xorg-video-ati 1:6.12.4-3 X.Org X server -- ATI display driver wrapper
ii xserver-xorg-video-chips 1:1.2.2-1 X.Org X server -- Chips display driver
ii xserver-xorg-video-cirrus 1:1.3.2-1 X.Org X server -- Cirrus display driver
ii xserver-xorg-video-fbdev 1:0.4.1-1 X.Org X server -- fbdev display driver
ii xserver-xorg-video-i128 1:1.3.3-1 X.Org X server -- i128 display driver
ii xserver-xorg-video-i740 1:1.3.2-1 X.Org X server -- i740 display driver
ii xserver-xorg-video-intel 2:2.9.1-2 X.Org X server -- Intel i8xx, i9xx display d
ii xserver-xorg-video-mach64 6.8.2-2 X.Org X server -- ATI Mach64 display driver
ii xserver-xorg-video-mga 1:1.4.11.dfsg-2 X.Org X server -- MGA display driver
ii xserver-xorg-video-neomagic 1:1.2.4-2 X.Org X server -- Neomagic display driver
ii xserver-xorg-video-nv 1:2.1.15-1 X.Org X server -- NV display driver
ii xserver-xorg-video-openchrome 1:0.2.904+svn827-1 X.Org X server -- VIA display driver
ii xserver-xorg-video-r128 6.8.1-2 X.Org X server -- ATI r128 display driver
ii xserver-xorg-video-radeon 1:6.12.4-3 X.Org X server -- ATI Radeon display driver
ii xserver-xorg-video-radeonhd 1.3.0-2 X.Org X server -- AMD/ATI r5xx, r6xx display
ii xserver-xorg-video-rendition 1:4.2.3-1 X.Org X server -- Rendition display driver
ii xserver-xorg-video-s3 1:0.6.3-1 X.Org X server -- legacy S3 display driver
ii xserver-xorg-video-s3virge 1:1.10.4-1 X.Org X server -- S3 ViRGE display driver
ii xserver-xorg-video-savage 1:2.3.1-1 X.Org X server -- Savage display driver
ii xserver-xorg-video-siliconmotion 1:1.7.3-1 X.Org X server -- SiliconMotion display driv
ii xserver-xorg-video-sis 1:0.10.2-1 X.Org X server -- SiS display driver
ii xserver-xorg-video-sisusb 1:0.9.3-1 X.Org X server -- SiS USB display driver
ii xserver-xorg-video-tdfx 1:1.4.3-1 X.Org X server -- tdfx display driver
ii xserver-xorg-video-trident 1:1.3.3-1 X.Org X server -- Trident display driver
ii xserver-xorg-video-tseng 1:1.2.3-1 X.Org X server -- Tseng display driver
ii xserver-xorg-video-v4l 1:0.2.0-4 X.Org X server -- Video 4 Linux display driv
ii xserver-xorg-video-vesa 1:2.3.0-1 X.Org X server -- VESA display driver
ii xserver-xorg-video-vmware 1:10.16.9-1 X.Org X server -- VMware display driver
ii xserver-xorg-video-voodoo 1:1.2.3-1 X.Org X server -- Voodoo display driver
ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime
Reply to: