--- Begin Message ---
Package: xserver-xorg-video-intel
Version: 2:2.9.1-2
Severity: important
*** Please type your report below this line ***
Hi
I couldn't access to my graphical environment with i915.modeset=1, to
solved it I edited the linux line adding i915.modeset=0 on grub at the
boot process, and executed "sudo update-initramfs -u" to avoid edit
grub at every start.
My laptop is an HP Compaq 6710b with Lenny and Sid, and Sid was
installed with base and network tasks, and the graphical environment
consists in xserver-xorg-core, xfonts-75dpi, xfonts-100dpi,
xfonts-base, xserver-xorg-video-intel, (xserver-xorg-video-vesa
because I tested it without good results), gdm and awesome. Of course
in Lenny I don't have problems and I guess it's specific with the
2.6.32 version of the Debian Linux Kernel.
In other bugs mentioned to modify the "/etc/modprobe.d/i915-kms.conf"
file as a workaround, but I tried without results (comment the line,
change value from 1 to 0, delete the file), only adding the
"i915.modeset=1" to the linux line on grub at boot process works (as
explained in the top of this mail).
I made an screencast [1] and attached the dmesg output, if you need
more information please don't hesitate to ask. (Please include the
steps to obtain the information).
Best Regards and thanks for your hard work!
[1] http://www.youtube.com/watch?v=aewzs2Ivtjc
Fernando C. Estrada
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Feb 18 13:19 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1866912 Feb 16 04:25 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation Mobile
GM965/GL960 Integrated Graphics Controller (rev 0c)
/etc/X11/xorg.conf does not exist.
Xorg X server log files on system:
-rw-r--r-- 1 root root 27291 Feb 20 11:54 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.5
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.8-dsa-amd64 x86_64 Debian
Current Operating System: Linux hypatia 2.6.32-trunk-amd64 #1 SMP Sun
Jan 10 22:40:40 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-amd64
root=UUID=748f286b-2226-4ae6-9a1f-b3243af16631 ro quiet i915.modeset=1
Build Date: 16 February 2010 10:23:38AM
xorg-server 2:1.7.5-1 (buildd@brahms.debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 20 11:54:33 2010
(II) Loader magic: 0x7c1e20
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 8
(--) PCI:*(0:0:2:0) 8086:2a02:103c:30c0 Intel Corporation Mobile
GM965/GL960 Integrated Graphics Controller rev 12, Mem @
0xe4600000/1048576, 0xd0000000/268435456, I/O @ 0x00004000/8
(--) PCI: (0:0:2:1) 8086:2a03:103c:30c0 Intel Corporation Mobile
GM965/GL960 Integrated Graphics Controller rev 12, Mem @
0xe4700000/1048576
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in
"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
Entry deleted from font path.
(Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(II) intel(0): Output VGA1 has no monitor section
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface
/sys/class/backlight/acpi_video0
(II) intel(0): Output TV1 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Manufacturer: LPL Model: bd00 Serial#: 0
(II) intel(0): Year: 2006 Week: 0
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.600 redY: 0.351 greenX: 0.324 greenY: 0.554
(II) intel(0): blueX: 0.153 blueY: 0.140 whiteX: 0.312 whiteY: 0.328
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 73.5 MHz Image Size: 331 x 207 mm
(II) intel(0): h_active: 1280 h_sync: 1312 h_sync_end 1352
h_blank_end 1464 h_border: 0
(II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking:
837 v_border: 0
(II) intel(0): LGPhilipsLCD
(II) intel(0): LP154W01-TLE1
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff00320c00bd00000000
(II) intel(0): 00100103802115780ab3709959538d27
(II) intel(0): 23505400000001010101010101010101
(II) intel(0): 010101010101b61c00b8502025302028
(II) intel(0): 44004bcf100000190000000000000000
(II) intel(0): 00000000000000000000000000fe004c
(II) intel(0): 475068696c6970734c43440a000000fe
(II) intel(0): 004c503135345730312d544c45310038
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (interlace mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
(II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (hsync out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
(II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (hsync out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (hsync out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (hsync out of range)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (hsync out of range)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (hsync out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "832x624" (vrefresh out of range)
(II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (hsync out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
(II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (monitor doesn't
support reduced blanking)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (hsync out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1440x900" (hsync out of range)
(II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
(II) intel(0): Not using default mode "1600x1024" (hsync out of range)
(II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (hsync out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (hsync out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1080" (hsync out of range)
(II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1200" (hsync out of range)
(II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
(II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (hsync out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) intel(0): Printing probed modes for output LVDS1
(II) intel(0): Modeline "1280x800"x60.0 73.50 1280 1312 1352 1464
800 804 808 837 -hsync -vsync (50.2 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344
768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600
601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480
490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output TV1
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output TV1 disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS1 using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/udev: Adding input device "Power Button" (/dev/input/event4)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) "Power Button": always reports core events
(**) "Power Button": Device: "/dev/input/event4"
(II) "Power Button": Found keys
(II) "Power Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "latam"
(II) config/udev: Adding input device "Video Bus" (/dev/input/event5)
(**) "Video Bus": always reports core events
(**) "Video Bus": Device: "/dev/input/event5"
(II) "Video Bus": Found keys
(II) "Video Bus": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "latam"
(II) config/udev: Adding input device "Sleep Button" (/dev/input/event2)
(**) "Sleep Button": always reports core events
(**) "Sleep Button": Device: "/dev/input/event2"
(II) "Sleep Button": Found keys
(II) "Sleep Button": Configuring as keyboard
(II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "latam"
(II) config/udev: Adding input device "AT Translated Set 2 keyboard"
(/dev/input/event1)
(**) "AT Translated Set 2 keyboard": always reports core events
(**) "AT Translated Set 2 keyboard": Device: "/dev/input/event1"
(II) "AT Translated Set 2 keyboard": Found keys
(II) "AT Translated Set 2 keyboard": Configuring as keyboard
(II) XINPUT: Adding extended input device ""AT Translated Set 2
keyboard"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "latam"
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad"
(/dev/input/event8)
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event8"
(II) "SynPS/2 Synaptics TouchPad": x-axis range 1472 - 5472
(II) "SynPS/2 Synaptics TouchPad": y-axis range 1408 - 4448
(II) "SynPS/2 Synaptics TouchPad": pressure range 0 - 255
(II) "SynPS/2 Synaptics TouchPad": finger width range 0 - 0
(II) "SynPS/2 Synaptics TouchPad": buttons: left right middle double triple
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(**) "SynPS/2 Synaptics TouchPad": always reports core events
(II) XINPUT: Adding extended input device ""SynPS/2 Synaptics
TouchPad"" (type: TOUCHPAD)
(**) "SynPS/2 Synaptics TouchPad": (accel) keeping acceleration scheme 1
(**) "SynPS/2 Synaptics TouchPad": (accel) acceleration profile 0
(--) "SynPS/2 Synaptics TouchPad": touchpad found
(II) config/udev: Adding input device "SynPS/2 Synaptics TouchPad"
(/dev/input/mouse1)
(**) "SynPS/2 Synaptics TouchPad": always reports core events
(**) "SynPS/2 Synaptics TouchPad": Device: "/dev/input/mouse1"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""SynPS/2 Synaptics TouchPad""
(II) config/udev: Adding input device "Macintosh mouse button
emulation" (/dev/input/event0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/event0"
(II) "Macintosh mouse button emulation": Found 3 mouse buttons
(II) "Macintosh mouse button emulation": Found relative axes
(II) "Macintosh mouse button emulation": Found x and y relative axes
(II) "Macintosh mouse button emulation": Configuring as mouse
(**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
(**) "Macintosh mouse button emulation": EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device ""Macintosh mouse button
emulation"" (type: MOUSE)
(**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
(**) "Macintosh mouse button emulation": (accel) acceleration profile 0
(II) "Macintosh mouse button emulation": initialized for relative axes.
(II) config/udev: Adding input device "Macintosh mouse button
emulation" (/dev/input/mouse0)
(**) "Macintosh mouse button emulation": always reports core events
(**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
(II) config/udev: Adding input device "ACPI Virtual Keyboard Device"
(/dev/input/event10)
(**) "ACPI Virtual Keyboard Device": always reports core events
(**) "ACPI Virtual Keyboard Device": Device: "/dev/input/event10"
(II) "ACPI Virtual Keyboard Device": Found keys
(II) "ACPI Virtual Keyboard Device": Configuring as keyboard
(II) XINPUT: Adding extended input device ""ACPI Virtual Keyboard
Device"" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "latam"
(WW) intel(0): i830_uxa_prepare_access: bo map failed
(II) AIGLX: Suspending AIGLX clients for VT switch
udev information:
P: /devices/virtual/input/input0/event0
N: input/event0
S: char/13:64
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:64
P: /devices/platform/i8042/serio0/input/input1/event1
N: input/event1
S: char/13:65
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=latam
E: DEVLINKS=/dev/char/13:65 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard
P: /devices/virtual/input/input10/event10
N: input/event10
S: char/13:74
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input10/event10
E: MAJOR=13
E: MINOR=74
E: DEVNAME=/dev/input/event10
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=latam
E: DEVLINKS=/dev/char/13:74
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=latam
E: DEVLINKS=/dev/char/13:66
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:67
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
N: input/event4
S: char/13:68
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4
E: MAJOR=13
E: MINOR=68
E: DEVNAME=/dev/input/event4
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=latam
E: DEVLINKS=/dev/char/13:68
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5
N: input/event5
S: char/13:69
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event5
E: MAJOR=13
E: MINOR=69
E: DEVNAME=/dev/input/event5
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=latam
E: DEVLINKS=/dev/char/13:69
E: x11_driver=evdev
E: DMI_VENDOR=Hewlett-Packard
P: /devices/platform/pcspkr/input/input6/event6
N: input/event6
S: char/13:70
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input6/event6
E: MAJOR=13
E: MINOR=70
E: DEVNAME=/dev/input/event6
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:70 /dev/input/by-path/platform-pcspkr-event-spkr
P: /devices/platform/lis3lv02d/input/input7/event7
N: input/event7
S: char/13:71
S: input/by-path/platform-lis3lv02d-event
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/lis3lv02d/input/input7/event7
E: MAJOR=13
E: MINOR=71
E: DEVNAME=/dev/input/event7
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_PATH=platform-lis3lv02d
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:71 /dev/input/by-path/platform-lis3lv02d-event
P: /devices/platform/i8042/serio4/input/input8/event8
N: input/event8
S: char/13:72
S: input/by-path/platform-i8042-serio-4-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio4/input/input8/event8
E: MAJOR=13
E: MINOR=72
E: DEVNAME=/dev/input/event8
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-4
E: x11_driver=synaptics
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:72
/dev/input/by-path/platform-i8042-serio-4-event-mouse
P: /devices/pci0000:00/0000:00:1b.0/input/input9/event9
N: input/event9
S: char/13:73
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1b.0/input/input9/event9
E: MAJOR=13
E: MINOR=73
E: DEVNAME=/dev/input/event9
E: SUBSYSTEM=input
E: ID_INPUT=1
E: DMI_VENDOR=Hewlett-Packard
E: DEVLINKS=/dev/char/13:73
DRM Information from dmesg:
[ 0.000000] No AGP bridge found
[ 0.930042] Linux agpgart interface v0.103
[ 0.957959] [drm] Initialized drm 1.1.0 20060810
[ 2.387701] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 2.388274] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 2.390778] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.409152] [drm] set up 7M of stolen space
[ 3.005366] [drm] TV-14: set mode NTSC 480i 0
[ 3.214780] [drm] LVDS-8: set mode 1280x800 1d
[ 3.262153] fb0: inteldrmfb frame buffer device
[ 3.266889] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 17.960658] [drm] TV-14: set mode NTSC 480i 0
[ 18.140557] [drm] TV-14: set mode NTSC 480i 0
[ 18.439032] [drm] TV-14: set mode NTSC 480i 0
[ 18.619433] [drm] TV-14: set mode NTSC 480i 0
[ 22.488113] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 22.488191] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 2 at 1)
[ 25.412105] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 25.412152] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 4 at 3)
[ 26.520041] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 26.520110] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 19 at 18)
[ 28.649055] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 28.649105] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 27 at 25)
[ 28.649321] [drm:i915_gem_execbuffer] *ERROR* Execbuf while wedged
[ 29.278977] [drm] LVDS-8: set mode 1280x800 1d
[ 30.991699] [drm] TV-14: set mode NTSC 480i 0
[ 31.131819] [drm] TV-14: set mode NTSC 480i 0
[ 31.398662] [drm] TV-14: set mode NTSC 480i 0
[ 31.538720] [drm] TV-14: set mode NTSC 480i 0
[ 34.492146] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 34.492212] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 29 at 28)
[ 36.924142] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 36.924195] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 31 at 30)
[ 37.964143] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 37.964206] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 51 at 43)
[ 37.964477] [drm:i915_gem_execbuffer] *ERROR* Execbuf while wedged
[ 38.614975] [drm] LVDS-8: set mode 1280x800 1d
[ 40.328245] [drm] TV-14: set mode NTSC 480i 0
[ 40.468890] [drm] TV-14: set mode NTSC 480i 0
[ 40.729046] [drm] TV-14: set mode NTSC 480i 0
[ 40.869468] [drm] TV-14: set mode NTSC 480i 0
[ 43.616142] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 43.616194] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 53 at 52)
[ 46.016141] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 46.016482] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 55 at 54)
[ 46.944144] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 46.944215] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 61 at 58)
[ 47.884138] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 47.884270] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 63 at 62)
[ 47.884489] [drm:i915_gem_execbuffer] *ERROR* Execbuf while wedged
[ 48.528362] [drm] LVDS-8: set mode 1280x800 1d
[ 50.267848] [drm] TV-14: set mode NTSC 480i 0
[ 50.408207] [drm] TV-14: set mode NTSC 480i 0
[ 50.673479] [drm] TV-14: set mode NTSC 480i 0
[ 50.813731] [drm] TV-14: set mode NTSC 480i 0
[ 53.548141] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 53.548220] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 75 at 74)
[ 55.680137] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 55.680188] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 77 at 76)
[ 56.720140] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 56.720220] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 95 at 89)
[ 58.840139] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer
elapsed... GPU hung
[ 58.840215] [drm:i915_wait_request] *ERROR* i915_wait_request
returns -5 (awaiting 97 at 96)
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib
ii libdrm-intel1 2.4.17-1 Userspace interface to intel-speci
ii libdrm2 2.4.17-1 Userspace interface to kernel DRM
ii libpciaccess0 0.11.0-1 Generic PCI access library for X
ii libxext6 2:1.1.1-2 X11 miscellaneous extension librar
ii libxfixes3 1:4.0.4-1 X11 miscellaneous 'fixes' extensio
ii libxv1 2:1.0.5-1 X11 Video extension library
ii libxvmc1 2:1.0.5-1 X11 Video extension library
ii xserver-xorg-core 2:1.7.5-1 Xorg X server - core server
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-trunk-amd64 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 22:40:40 UTC 2010
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-amd64 root=UUID=748f286b-2226-4ae6-9a1f-b3243af16631 ro quiet i915.modeset=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf7b0000 (usable)
[ 0.000000] BIOS-e820: 00000000bf7b0000 - 00000000bf7c5400 (reserved)
[ 0.000000] BIOS-e820: 00000000bf7c5400 - 00000000bf7e7fb8 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf7e7fb8 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 base 0FEDA0000 mask FFFFE0000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbf7b0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf7b0000
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf7b0000 page 4k
[ 0.000000] kernel direct mapping tables up to bf7b0000 @ 8000-d000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000140000000
[ 0.000000] 0100000000 - 0140000000 page 2M
[ 0.000000] kernel direct mapping tables up to 140000000 @ b000-11000
[ 0.000000] RAMDISK: 377e1000 - 37fefb39
[ 0.000000] ACPI: RSDP 00000000000f72c0 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000bf7c81cc 00084 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: FACP 00000000bf7c8084 000F4 (v04 HP 30C0 00000003 HP 00000001)
[ 0.000000] ACPI: DSDT 00000000bf7c84d8 1313E (v01 HP nc75xx 00010000 MSFT 03000001)
[ 0.000000] ACPI: FACS 00000000bf7e7d80 00040
[ 0.000000] ACPI: SLIC 00000000bf7c8250 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: HPET 00000000bf7c83c8 00038 (v01 HP 30C0 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 00000000bf7c8400 00068 (v01 HP 30C0 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 00000000bf7c8468 0003C (v01 HP 30C0 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 00000000bf7c84a4 00032 (v02 HP 30C0 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 00000000bf7db616 00059 (v01 HP HPQNLP 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 00000000bf7db66f 00328 (v01 HP HPQSAT 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 00000000bf7db997 0017D (v01 HP HPQMRM 00000001 MSFT 03000001)
[ 0.000000] ACPI: SSDT 00000000bf7dc456 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT 00000000bf7dc6b5 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
[ 0.000000] ACPI: SSDT 00000000bf7dc75b 004D7 (v01 HP CpuPm 00003000 INTL 20060317)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000140000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000140000000
[ 0.000000] NODE_DATA [000000000000c000 - 0000000000013fff]
[ 0.000000] bootmap [0000000000014000 - 000000000003bfff] pages 28
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0140000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000165d9d4] TEXT DATA BSS ==> [0001000000 - 000165d9d4]
[ 0.000000] #3 [00377e1000 - 0037fefb39] RAMDISK ==> [00377e1000 - 0037fefb39]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [000165e000 - 000165e19c] BRK ==> [000165e000 - 000165e19c]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] #7 [000000b000 - 000000c000] PGTABLE ==> [000000b000 - 000000c000]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880001800000-ffff880004ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf7b0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 1046351
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3840 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 765928 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 258560 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bf7b0000 - 00000000bf7c5000
[ 0.000000] PM: Registered nosave memory: 00000000bf7c5000 - 00000000bf7c6000
[ 0.000000] PM: Registered nosave memory: 00000000bf7c6000 - 00000000bf7e7000
[ 0.000000] PM: Registered nosave memory: 00000000bf7e7000 - 00000000bf7e8000
[ 0.000000] PM: Registered nosave memory: 00000000bf7e8000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fed9a000
[ 0.000000] PM: Registered nosave memory: 00000000fed9a000 - 00000000feda0000
[ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fedc0000
[ 0.000000] PM: Registered nosave memory: 00000000fedc0000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb00000
[ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880005200000 s89880 r8192 d20712 u1048576
[ 0.000000] pcpu-alloc: s89880 r8192 d20712 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028328
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-amd64 root=UUID=748f286b-2226-4ae6-9a1f-b3243af16631 ro quiet i915.modeset=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000000] Placing 64MB software IO TLB between ffff88000531d000 - ffff88000931d000
[ 0.000000] software IO TLB at phys 0x531d000 - 0x931d000
[ 0.000000] Memory: 4046664k/5242880k available (2981k kernel code, 1057476k absent, 138740k reserved, 1843k data, 576k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1795.757 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.51 BogoMIPS (lpj=7183028)
[ 0.004029] Security Framework initialized
[ 0.004035] SELinux: Disabled at boot.
[ 0.008412] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010729] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011808] Mount-cache hash table entries: 256
[ 0.011988] Initializing cgroup subsys ns
[ 0.012016] Initializing cgroup subsys cpuacct
[ 0.012021] Initializing cgroup subsys devices
[ 0.012024] Initializing cgroup subsys freezer
[ 0.012026] Initializing cgroup subsys net_cls
[ 0.012055] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.012058] CPU: L2 cache: 2048K
[ 0.012062] CPU 0/0x0 -> Node 0
[ 0.012065] CPU: Physical Processor ID: 0
[ 0.012067] CPU: Processor Core ID: 0
[ 0.012070] mce: CPU supports 6 MCE banks
[ 0.012078] CPU0: Thermal monitoring handled by SMI
[ 0.012083] using mwait in idle threads.
[ 0.012084] Performance Events: Core2 events, Intel PMU driver.
[ 0.012091] ... version: 2
[ 0.012093] ... bit width: 40
[ 0.012095] ... generic registers: 2
[ 0.012097] ... value mask: 000000ffffffffff
[ 0.012099] ... max period: 000000007fffffff
[ 0.012101] ... fixed-purpose events: 3
[ 0.012103] ... event mask: 0000000700000003
[ 0.013231] ACPI: Core revision 20090903
[ 0.044049] Setting APIC routing to flat
[ 0.044409] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084108] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 0.088001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] Calibrating delay using timer specific routine.. 3590.98 BogoMIPS (lpj=7181971)
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU 1/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.172088] CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 0.172098] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.176017] Brought up 2 CPUs
[ 0.176020] Total of 2 processors activated (7182.49 BogoMIPS).
[ 0.176482] CPU0 attaching sched-domain:
[ 0.176486] domain 0: span 0-1 level MC
[ 0.176489] groups: 0 1
[ 0.176496] CPU1 attaching sched-domain:
[ 0.176498] domain 0: span 0-1 level MC
[ 0.176501] groups: 1 0
[ 0.176665] devtmpfs: initialized
[ 0.181136] regulator: core version 0.5
[ 0.181190] NET: Registered protocol family 16
[ 0.181296] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.181300] ACPI: bus type pci registered
[ 0.181380] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.181383] PCI: Not using MMCONFIG.
[ 0.181385] PCI: Using configuration type 1 for base access
[ 0.181898] bio: create slab <bio-0> at 0
[ 0.183034] ACPI: EC: Look up EC in DSDT
[ 0.248130] ACPI: Interpreter enabled
[ 0.248136] ACPI: (supports S0 S3 S4 S5)
[ 0.248157] ACPI: Using IOAPIC for interrupt routing
[ 0.248217] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.257310] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
[ 0.260538] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.273542] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.273758] ACPI: Power Resource [C27F] (on)
[ 0.273808] ACPI: Power Resource [C29B] (on)
[ 0.273863] ACPI: Power Resource [C1C5] (off)
[ 0.273980] ACPI: Power Resource [C3BC] (off)
[ 0.274084] ACPI: Power Resource [C3BD] (off)
[ 0.274186] ACPI: Power Resource [C3BE] (off)
[ 0.274287] ACPI: Power Resource [C3BF] (off)
[ 0.274388] ACPI: Power Resource [C3C0] (off)
[ 0.274798] ACPI: No dock devices found.
[ 0.279392] ACPI: PCI Root Bridge [C003] (0000:00)
[ 0.279491] pci 0000:00:02.0: reg 10 64bit mmio: [0xe4600000-0xe46fffff]
[ 0.279499] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.279505] pci 0000:00:02.0: reg 20 io port: [0x4000-0x4007]
[ 0.279546] pci 0000:00:02.1: reg 10 64bit mmio: [0xe4700000-0xe47fffff]
[ 0.279665] pci 0000:00:1a.0: reg 20 io port: [0x4020-0x403f]
[ 0.279734] pci 0000:00:1a.1: reg 20 io port: [0x4040-0x405f]
[ 0.279811] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe4800000-0xe48003ff]
[ 0.279878] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.279884] pci 0000:00:1a.7: PME# disabled
[ 0.279941] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe4804000-0xe4807fff]
[ 0.280012] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.280018] pci 0000:00:1b.0: PME# disabled
[ 0.280116] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.280122] pci 0000:00:1c.0: PME# disabled
[ 0.280227] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.280232] pci 0000:00:1c.1: PME# disabled
[ 0.280334] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.280339] pci 0000:00:1c.2: PME# disabled
[ 0.280442] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.280447] pci 0000:00:1c.4: PME# disabled
[ 0.280517] pci 0000:00:1d.0: reg 20 io port: [0x4060-0x407f]
[ 0.280586] pci 0000:00:1d.1: reg 20 io port: [0x4080-0x409f]
[ 0.280656] pci 0000:00:1d.2: reg 20 io port: [0x40a0-0x40bf]
[ 0.280732] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe4808000-0xe48083ff]
[ 0.280798] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.280804] pci 0000:00:1d.7: PME# disabled
[ 0.280991] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.280996] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
[ 0.281001] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[ 0.281010] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
[ 0.281066] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.281075] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.281083] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.281092] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.281100] pci 0000:00:1f.1: reg 20 io port: [0x40c0-0x40cf]
[ 0.281178] pci 0000:00:1f.2: reg 10 io port: [0x13f0-0x13f7]
[ 0.281187] pci 0000:00:1f.2: reg 14 io port: [0x15f4-0x15f7]
[ 0.281196] pci 0000:00:1f.2: reg 18 io port: [0x1370-0x1377]
[ 0.281204] pci 0000:00:1f.2: reg 1c io port: [0x1574-0x1577]
[ 0.281213] pci 0000:00:1f.2: reg 20 io port: [0x4100-0x411f]
[ 0.281222] pci 0000:00:1f.2: reg 24 32bit mmio: [0xe4809000-0xe48097ff]
[ 0.281267] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.281272] pci 0000:00:1f.2: PME# disabled
[ 0.281499] pci 0000:10:00.0: reg 10 64bit mmio: [0xe4100000-0xe4101fff]
[ 0.281632] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[ 0.281645] pci 0000:10:00.0: PME# disabled
[ 0.281744] pci 0000:00:1c.1: bridge 32bit mmio: [0xe4100000-0xe41fffff]
[ 0.281880] pci 0000:18:00.0: reg 10 64bit mmio: [0xe4000000-0xe400ffff]
[ 0.281990] pci 0000:18:00.0: PME# supported from D3hot D3cold
[ 0.281996] pci 0000:18:00.0: PME# disabled
[ 0.282082] pci 0000:00:1c.2: bridge 32bit mmio: [0xe4000000-0xe40fffff]
[ 0.282154] pci 0000:00:1c.4: bridge io port: [0x2000-0x3fff]
[ 0.282160] pci 0000:00:1c.4: bridge 32bit mmio: [0xe0000000-0xe3ffffff]
[ 0.282229] pci 0000:02:04.0: reg 10 32bit mmio: [0xe4200000-0xe4200fff]
[ 0.282260] pci 0000:02:04.0: supports D1 D2
[ 0.282262] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.282269] pci 0000:02:04.0: PME# disabled
[ 0.282324] pci 0000:02:04.1: reg 10 32bit mmio: [0xe4201000-0xe42017ff]
[ 0.282400] pci 0000:02:04.1: supports D1 D2
[ 0.282402] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.282408] pci 0000:02:04.1: PME# disabled
[ 0.282489] pci 0000:00:1e.0: transparent bridge
[ 0.282498] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4200000-0xe45fffff]
[ 0.282565] ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
[ 0.282849] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B0._PRT]
[ 0.282974] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11D._PRT]
[ 0.283061] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C131._PRT]
[ 0.283154] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C132._PRT]
[ 0.283247] ACPI: PCI Interrupt Routing Table [\_SB_.C003.C134._PRT]
[ 0.331428] ACPI: PCI Interrupt Link [C12D] (IRQs 10 11) *5
[ 0.331659] ACPI: PCI Interrupt Link [C12E] (IRQs *10 11)
[ 0.331885] ACPI: PCI Interrupt Link [C12F] (IRQs 10 *11)
[ 0.332109] ACPI: PCI Interrupt Link [C130] (IRQs 10 11) *0, disabled.
[ 0.332336] ACPI: PCI Interrupt Link [C140] (IRQs *10 11)
[ 0.332562] ACPI: PCI Interrupt Link [C141] (IRQs *10 11)
[ 0.332777] ACPI: PCI Interrupt Link [C142] (IRQs 10 11) *0, disabled.
[ 0.332881] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20090903/pci_link-184)
[ 0.333053] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.333070] vgaarb: loaded
[ 0.333145] PCI: Using ACPI for IRQ routing
[ 0.333438] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.333443] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.336011] Switching to clocksource tsc
[ 0.337427] pnp: PnP ACPI init
[ 0.337437] ACPI: bus type pnp registered
[ 0.346826] alloc irq_desc for 23 on node 0
[ 0.346829] alloc kstat_irqs on node 0
[ 0.348703] pnp: PnP ACPI: found 15 devices
[ 0.348705] ACPI: ACPI bus type pnp unregistered
[ 0.348716] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.348719] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.348723] system 00:00: iomem range 0x100000-0xbf7fffff could not be reserved
[ 0.348734] system 00:0b: ioport range 0x500-0x55f has been reserved
[ 0.348737] system 00:0b: ioport range 0x800-0x80f has been reserved
[ 0.348741] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.348745] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.348751] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[ 0.348754] system 00:0d: ioport range 0x1000-0x107f has been reserved
[ 0.348758] system 00:0d: ioport range 0x1100-0x113f has been reserved
[ 0.348761] system 00:0d: ioport range 0x1200-0x121f has been reserved
[ 0.348765] system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.348769] system 00:0d: iomem range 0xfec00000-0xfec000ff could not be reserved
[ 0.348772] system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.348776] system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.348779] system 00:0d: iomem range 0xfed90000-0xfed99fff has been reserved
[ 0.348785] system 00:0e: iomem range 0xcee00-0xcffff has been reserved
[ 0.348789] system 00:0e: iomem range 0xfeda0000-0xfedbffff has been reserved
[ 0.348792] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.353579] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
[ 0.353582] pci 0000:00:1c.0: IO window: disabled
[ 0.353588] pci 0000:00:1c.0: MEM window: disabled
[ 0.353593] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.353599] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:10
[ 0.353603] pci 0000:00:1c.1: IO window: 0x5000-0x5fff
[ 0.353610] pci 0000:00:1c.1: MEM window: 0xe4100000-0xe41fffff
[ 0.353616] pci 0000:00:1c.1: PREFETCH window: 0x000000c4000000-0x000000c41fffff
[ 0.353625] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:18
[ 0.353629] pci 0000:00:1c.2: IO window: 0x6000-0x6fff
[ 0.353636] pci 0000:00:1c.2: MEM window: 0xe4000000-0xe40fffff
[ 0.353642] pci 0000:00:1c.2: PREFETCH window: 0x000000c4200000-0x000000c43fffff
[ 0.353651] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:28
[ 0.353655] pci 0000:00:1c.4: IO window: 0x2000-0x3fff
[ 0.353662] pci 0000:00:1c.4: MEM window: 0xe0000000-0xe3ffffff
[ 0.353668] pci 0000:00:1c.4: PREFETCH window: 0x000000c4400000-0x000000c45fffff
[ 0.353679] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
[ 0.353682] pci 0000:02:04.0: IO window: 0x007000-0x0070ff
[ 0.353688] pci 0000:02:04.0: IO window: 0x007400-0x0074ff
[ 0.353694] pci 0000:02:04.0: PREFETCH window: 0xc0000000-0xc3ffffff
[ 0.353701] pci 0000:02:04.0: MEM window: 0xc8000000-0xcbffffff
[ 0.353707] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.353711] pci 0000:00:1e.0: IO window: 0x7000-0x7fff
[ 0.353718] pci 0000:00:1e.0: MEM window: 0xe4200000-0xe45fffff
[ 0.353724] pci 0000:00:1e.0: PREFETCH window: 0xc0000000-0xc3ffffff
[ 0.353742] alloc irq_desc for 16 on node -1
[ 0.353744] alloc kstat_irqs on node -1
[ 0.353749] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.353756] pci 0000:00:1c.0: setting latency timer to 64
[ 0.353767] alloc irq_desc for 17 on node -1
[ 0.353769] alloc kstat_irqs on node -1
[ 0.353773] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.353778] pci 0000:00:1c.1: setting latency timer to 64
[ 0.353789] alloc irq_desc for 18 on node -1
[ 0.353791] alloc kstat_irqs on node -1
[ 0.353795] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.353801] pci 0000:00:1c.2: setting latency timer to 64
[ 0.353812] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.353817] pci 0000:00:1c.4: setting latency timer to 64
[ 0.353826] pci 0000:00:1e.0: setting latency timer to 64
[ 0.353839] pci 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.353847] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.353850] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.353854] pci_bus 0000:10: resource 0 io: [0x5000-0x5fff]
[ 0.353857] pci_bus 0000:10: resource 1 mem: [0xe4100000-0xe41fffff]
[ 0.353860] pci_bus 0000:10: resource 2 pref mem [0xc4000000-0xc41fffff]
[ 0.353862] pci_bus 0000:18: resource 0 io: [0x6000-0x6fff]
[ 0.353865] pci_bus 0000:18: resource 1 mem: [0xe4000000-0xe40fffff]
[ 0.353868] pci_bus 0000:18: resource 2 pref mem [0xc4200000-0xc43fffff]
[ 0.353871] pci_bus 0000:28: resource 0 io: [0x2000-0x3fff]
[ 0.353873] pci_bus 0000:28: resource 1 mem: [0xe0000000-0xe3ffffff]
[ 0.353876] pci_bus 0000:28: resource 2 pref mem [0xc4400000-0xc45fffff]
[ 0.353879] pci_bus 0000:02: resource 0 io: [0x7000-0x7fff]
[ 0.353882] pci_bus 0000:02: resource 1 mem: [0xe4200000-0xe45fffff]
[ 0.353885] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xc3ffffff]
[ 0.353888] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.353890] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.353893] pci_bus 0000:03: resource 0 io: [0x7000-0x70ff]
[ 0.353896] pci_bus 0000:03: resource 1 io: [0x7400-0x74ff]
[ 0.353899] pci_bus 0000:03: resource 2 pref mem [0xc0000000-0xc3ffffff]
[ 0.353901] pci_bus 0000:03: resource 3 mem: [0xc8000000-0xcbffffff]
[ 0.353934] NET: Registered protocol family 2
[ 0.354124] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.355605] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.359928] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.360468] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.360471] TCP reno registered
[ 0.360594] NET: Registered protocol family 1
[ 0.360618] pci 0000:00:02.0: Boot video device
[ 0.360845] Unpacking initramfs...
[ 0.585557] Freeing initrd memory: 8250k freed
[ 0.590068] audit: initializing netlink socket (disabled)
[ 0.590086] type=2000 audit(1266688423.587:1): initialized
[ 0.590483] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.592102] VFS: Disk quotas dquot_6.5.2
[ 0.592163] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.592249] msgmni has been set to 7919
[ 0.592463] alg: No test for stdrng (krng)
[ 0.592517] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.592520] io scheduler noop registered
[ 0.592522] io scheduler anticipatory registered
[ 0.592525] io scheduler deadline registered
[ 0.592564] io scheduler cfq registered (default)
[ 0.592718] alloc irq_desc for 24 on node -1
[ 0.592721] alloc kstat_irqs on node -1
[ 0.592736] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.592748] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.592899] alloc irq_desc for 25 on node -1
[ 0.592902] alloc kstat_irqs on node -1
[ 0.592911] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.592923] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.593087] alloc irq_desc for 26 on node -1
[ 0.593089] alloc kstat_irqs on node -1
[ 0.593098] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.593110] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.593271] alloc irq_desc for 27 on node -1
[ 0.593273] alloc kstat_irqs on node -1
[ 0.593282] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
[ 0.593293] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.595117] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.595574] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.595643] PNP: PS/2 Controller [PNP0303:C298,PNP0f13:C299] at 0x60,0x64 irq 1,12
[ 0.597267] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.598035] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.598041] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.598069] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.598096] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.598119] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.598236] mice: PS/2 mouse device common for all mice
[ 0.598254] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 0.598295] rtc_cmos 00:07: RTC can wake from S4
[ 0.598338] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.598372] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.598385] cpuidle: using governor ladder
[ 0.598387] cpuidle: using governor menu
[ 0.598392] No iBFT detected.
[ 0.598757] TCP cubic registered
[ 0.598881] NET: Registered protocol family 10
[ 0.599376] lo: Disabled Privacy Extensions
[ 0.599691] Mobile IPv6
[ 0.599694] NET: Registered protocol family 17
[ 0.599780] registered taskstats version 1
[ 0.600449] rtc_cmos 00:07: setting system clock to 2010-02-20 17:53:44 UTC (1266688424)
[ 0.600528] Freeing unused kernel memory: 576k freed
[ 0.600746] Write protecting the kernel read-only data: 4096k
[ 0.619636] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.706587] fan PNP0C0B:00: registered as cooling_device0
[ 0.706595] ACPI: Fan [C3C1] (off)
[ 0.706808] fan PNP0C0B:01: registered as cooling_device1
[ 0.706814] ACPI: Fan [C3C2] (off)
[ 0.707021] fan PNP0C0B:02: registered as cooling_device2
[ 0.707027] ACPI: Fan [C3C3] (off)
[ 0.707234] fan PNP0C0B:03: registered as cooling_device3
[ 0.707240] ACPI: Fan [C3C4] (off)
[ 0.707446] fan PNP0C0B:04: registered as cooling_device4
[ 0.707452] ACPI: Fan [C3C5] (off)
[ 0.714013] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.714023] ACPI: Thermal Zone [TZ3] (40 C)
[ 0.723095] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.723104] ACPI: Thermal Zone [TZ4] (28 C)
[ 0.726794] thermal LNXTHERM:03: registered as thermal_zone2
[ 0.726803] ACPI: Thermal Zone [TZ5] (49 C)
[ 0.744874] thermal LNXTHERM:04: registered as thermal_zone3
[ 0.744882] ACPI: Thermal Zone [TZ0] (52 C)
[ 0.749265] thermal LNXTHERM:05: registered as thermal_zone4
[ 0.749273] ACPI: Thermal Zone [TZ1] (56 C)
[ 0.889689] usbcore: registered new interface driver usbfs
[ 0.889781] Uniform Multi-Platform E-IDE driver
[ 0.891968] usbcore: registered new interface driver hub
[ 0.902712] usbcore: registered new device driver usb
[ 0.903854] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.903863] ACPI: Sleep Button [C2BF]
[ 0.903928] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 0.904042] ACPI: Lid Switch [C153]
[ 0.904108] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 0.904112] ACPI: Power Button [PWRF]
[ 0.905755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.905791] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.905834] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.905838] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.905871] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.905915] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.906679] SCSI subsystem initialized
[ 0.909806] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.909895] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe4800000
[ 0.923889] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.923933] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.923936] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.923939] usb usb1: Product: EHCI Host Controller
[ 0.923942] usb usb1: Manufacturer: Linux 2.6.32-trunk-amd64 ehci_hcd
[ 0.923944] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.924041] usb usb1: configuration #1 chosen from 1 choice
[ 0.924075] hub 1-0:1.0: USB hub found
[ 0.924085] hub 1-0:1.0: 4 ports detected
[ 0.924164] alloc irq_desc for 20 on node -1
[ 0.924166] alloc kstat_irqs on node -1
[ 0.924175] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.924208] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.924211] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.924222] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.924254] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.928147] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.928340] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe4808000
[ 0.930042] Linux agpgart interface v0.103
[ 0.943878] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.943909] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.943912] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.943915] usb usb2: Product: EHCI Host Controller
[ 0.943917] usb usb2: Manufacturer: Linux 2.6.32-trunk-amd64 ehci_hcd
[ 0.943920] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.944014] usb usb2: configuration #1 chosen from 1 choice
[ 0.944048] hub 2-0:1.0: USB hub found
[ 0.944058] hub 2-0:1.0: 6 ports detected
[ 0.947864] piix 0000:00:1f.1: IDE controller (0x8086:0x2850 rev 0x03)
[ 0.947878] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.947893] piix 0000:00:1f.1: IDE port disabled
[ 0.947905] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 0.947912] ide0: BM-DMA at 0x40c0-0x40c7
[ 0.947920] Probing IDE interface ide0...
[ 0.952354] libata version 3.00 loaded.
[ 0.953671] firewire_ohci 0000:02:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.957959] [drm] Initialized drm 1.1.0 20060810
[ 0.962126] tg3.c:v3.102 (September 1, 2009)
[ 0.962190] tg3 0000:18:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.962203] tg3 0000:18:00.0: setting latency timer to 64
[ 0.996282] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.032011] firewire_ohci: Added fw-ohci device 0000:02:04.1, OHCI version 1.10
[ 1.532092] firewire_core: created device fw0: GUID 00023f9929c1250e, S400
[ 1.684289] hda: TSSTcorpCDW/DVD TS-L462D, ATAPI CD/DVD-ROM drive
[ 1.785274] eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:17:a4:e6:bf:b4
[ 1.785278] eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.785281] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.785284] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.356044] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.356442] hda: MWDMA2 mode selected
[ 2.356711] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.386616] ahci 0000:00:1f.2: version 3.0
[ 2.386635] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.386705] alloc irq_desc for 28 on node -1
[ 2.386708] alloc kstat_irqs on node -1
[ 2.386721] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 2.386758] ahci: SSS flag set, parallel bus scan disabled
[ 2.386788] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x1 impl SATA mode
[ 2.386792] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
[ 2.386798] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.387395] scsi0 : ahci
[ 2.387498] scsi1 : ahci
[ 2.387560] scsi2 : ahci
[ 2.387652] ata1: SATA max UDMA/133 abar m2048@0xe4809000 port 0xe4809100 irq 28
[ 2.387655] ata2: DUMMY
[ 2.387656] ata3: DUMMY
[ 2.387701] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 2.388274] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 2.390778] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.390858] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.390863] i915 0000:00:02.0: setting latency timer to 64
[ 2.409129] alloc irq_desc for 29 on node -1
[ 2.409133] alloc kstat_irqs on node -1
[ 2.409144] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 2.409152] [drm] set up 7M of stolen space
[ 2.949020] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.951611] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.951616] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.951772] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 2.951776] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.952509] ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC7BP, max UDMA/100
[ 2.952512] ata1.00: 234441648 sectors, multi 16: LBA48
[ 2.955244] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.955248] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.955408] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 2.955412] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.956150] ata1.00: configured for UDMA/100
[ 2.974684] ata1.00: configured for UDMA/100
[ 2.974688] ata1: EH complete
[ 2.974792] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
[ 2.980991] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.981048] sd 0:0:0:0: [sda] Write Protect is off
[ 2.981052] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.981076] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.981217] sda:
[ 3.005366] [drm] TV-14: set mode NTSC 480i 0
[ 3.214780] [drm] LVDS-8: set mode 1280x800 1d
[ 3.258353] Console: switching to colour frame buffer device 160x50
[ 3.262153] fb0: inteldrmfb frame buffer device
[ 3.262155] registered panic notifier
[ 3.266038] acpi device:00: registered as cooling_device5
[ 3.266834] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 3.266842] ACPI: Video Device [C098] (multi-head: yes rom: no post: no)
[ 3.266889] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.266930] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.266941] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.266946] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.266962] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.267011] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00004020
[ 3.267061] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.267064] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.267067] usb usb3: Product: UHCI Host Controller
[ 3.267069] usb usb3: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 3.267072] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.267164] usb usb3: configuration #1 chosen from 1 choice
[ 3.267201] hub 3-0:1.0: USB hub found
[ 3.267210] hub 3-0:1.0: 2 ports detected
[ 3.267444] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.267452] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.267456] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.267467] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.267499] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00004040
[ 3.267542] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.267545] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.267548] usb usb4: Product: UHCI Host Controller
[ 3.267550] usb usb4: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 3.267553] usb usb4: SerialNumber: 0000:00:1a.1
[ 3.267634] usb usb4: configuration #1 chosen from 1 choice
[ 3.267665] hub 4-0:1.0: USB hub found
[ 3.267673] hub 4-0:1.0: 2 ports detected
[ 3.267735] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.267743] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.267747] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.267755] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.267786] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004060
[ 3.267827] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.267829] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.267832] usb usb5: Product: UHCI Host Controller
[ 3.267834] usb usb5: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 3.267837] usb usb5: SerialNumber: 0000:00:1d.0
[ 3.267901] usb usb5: configuration #1 chosen from 1 choice
[ 3.267931] hub 5-0:1.0: USB hub found
[ 3.267938] hub 5-0:1.0: 2 ports detected
[ 3.267999] alloc irq_desc for 21 on node -1
[ 3.268002] alloc kstat_irqs on node -1
[ 3.268022] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.268029] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.268033] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.268044] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.268084] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00004080
[ 3.268125] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.268128] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.268131] usb usb6: Product: UHCI Host Controller
[ 3.268133] usb usb6: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 3.268136] usb usb6: SerialNumber: 0000:00:1d.1
[ 3.268197] usb usb6: configuration #1 chosen from 1 choice
[ 3.268231] hub 6-0:1.0: USB hub found
[ 3.268238] hub 6-0:1.0: 2 ports detected
[ 3.268293] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.268301] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.268305] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.268313] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.268345] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000040a0
[ 3.268383] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.268386] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.268389] usb usb7: Product: UHCI Host Controller
[ 3.268391] usb usb7: Manufacturer: Linux 2.6.32-trunk-amd64 uhci_hcd
[ 3.268394] usb usb7: SerialNumber: 0000:00:1d.2
[ 3.268465] usb usb7: configuration #1 chosen from 1 choice
[ 3.268494] hub 7-0:1.0: USB hub found
[ 3.268501] hub 7-0:1.0: 2 ports detected
[ 3.396204] sda1 sda2 sda3 < sda5 >
[ 3.424796] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.433788] ide-cd driver 5.00
[ 3.447608] ide-cd: hda: ATAPI 24X DVD-ROM CD-R/RW drive, 1536kB Cache
[ 3.447614] Uniform CD-ROM driver Revision: 3.20
[ 3.576021] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 3.754985] usb 3-1: New USB device found, idVendor=03f0, idProduct=171d
[ 3.754989] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.754992] usb 3-1: Product: HP Integrated Module
[ 3.754994] usb 3-1: Manufacturer: Broadcom Corp
[ 3.755089] usb 3-1: configuration #1 chosen from 1 choice
[ 3.828648] PM: Starting manual resume from disk
[ 3.879252] kjournald starting. Commit interval 5 seconds
[ 3.879261] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.320024] udev: starting version 151
[ 5.752323] tpm_inf_pnp 00:03: Found C280 with ID IFX0102
[ 5.752382] tpm_inf_pnp 00:03: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 5.765645] ACPI: SSDT 00000000bf7dbbdc 001FB (v01 HP Cpu0Ist 00003000 INTL 20060317)
[ 5.766221] ACPI: SSDT 00000000bf7dbe5c 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317)
[ 5.789736] Monitor-Mwait will be used to enter C-1 state
[ 5.789764] Monitor-Mwait will be used to enter C-2 state
[ 5.789785] Monitor-Mwait will be used to enter C-3 state
[ 5.789792] Marking TSC unstable due to TSC halts in idle
[ 5.789923] processor LNXCPU:00: registered as cooling_device6
[ 5.790386] ACPI: SSDT 00000000bf7dbb14 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
[ 5.790781] ACPI: SSDT 00000000bf7dbdd7 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
[ 5.791916] processor LNXCPU:01: registered as cooling_device7
[ 5.812561] ACPI: Battery Slot [C23B] (battery present)
[ 5.812766] ACPI: Battery Slot [C23A] (battery absent)
[ 5.814532] ACPI: AC Adapter [C239] (off-line)
[ 5.814915] Switching to clocksource hpet
[ 5.828176] ACPI: WMI: Mapper loaded
[ 6.296245] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.562207] Bluetooth: Core ver 2.15
[ 6.562257] NET: Registered protocol family 31
[ 6.562259] Bluetooth: HCI device and connection manager initialized
[ 6.562262] Bluetooth: HCI socket layer initialized
[ 6.573190] cfg80211: Using static regulatory domain info
[ 6.573194] cfg80211: Regulatory domain: US
[ 6.573196] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.573199] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 6.573202] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.573205] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.573209] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.573212] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 6.573215] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 6.573224] cfg80211: Calling CRDA for country: US
[ 6.581365] parport_pc 00:02: reported by Plug and Play ACPI
[ 6.581455] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 6.709218] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:30c0]
[ 6.836764] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0c38, PCI irq 16
[ 6.836769] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[ 6.836774] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 6.836783] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
[ 6.836787] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xe4200000 - 0xe45fffff
[ 6.836790] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xc0000000 - 0xc3ffffff
[ 7.055681] lis3lv02d: hardware type NC6710x found.
[ 7.056440] lis3lv02d: 2-byte sensor found
[ 7.056964] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.057183] usbcore: registered new interface driver btusb
[ 7.071408] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7
[ 7.071510] Registered led device: hp::hddprotect
[ 7.071729] lis3lv02d driver loaded.
[ 7.359118] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 7.359121] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 7.359245] iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.359274] iwlagn 0000:10:00.0: setting latency timer to 64
[ 7.359383] iwlagn 0000:10:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 7.408737] iwlagn 0000:10:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 7.408805] alloc irq_desc for 30 on node -1
[ 7.408808] alloc kstat_irqs on node -1
[ 7.408831] iwlagn 0000:10:00.0: irq 30 for MSI/MSI-X
[ 7.657840] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 7.713674] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
[ 7.713681] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 7.754622] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 7.768680] Error: Driver 'pcspkr' is already registered, aborting...
[ 7.889639] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 7.889654] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.889739] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.146249] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 8.876805] Adding 1983988k swap on /dev/sda5. Priority:-1 extents:1 across:1983988k
[ 9.055838] EXT3 FS on sda1, internal journal
[ 9.147653] loop: module loaded
[ 9.797248] kjournald starting. Commit interval 5 seconds
[ 9.797499] EXT3 FS on sda2, internal journal
[ 9.797505] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.085091] alloc irq_desc for 31 on node -1
[ 11.085095] alloc kstat_irqs on node -1
[ 11.085115] tg3 0000:18:00.0: irq 31 for MSI/MSI-X
[ 11.115238] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.174883] fuse init (API version 7.13)
[ 11.407867] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 17.960658] [drm] TV-14: set mode NTSC 480i 0
[ 18.140557] [drm] TV-14: set mode NTSC 480i 0
[ 18.439032] [drm] TV-14: set mode NTSC 480i 0
[ 18.619433] [drm] TV-14: set mode NTSC 480i 0
[ 22.488113] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 22.488131] render error detected, EIR: 0x00000000
[ 22.488136] i915: Waking up sleeping processes
[ 22.488191] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 2 at 1)
[ 25.412105] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 25.412117] render error detected, EIR: 0x00000000
[ 25.412123] i915: Waking up sleeping processes
[ 25.412152] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 4 at 3)
[ 26.520041] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 26.520053] render error detected, EIR: 0x00000000
[ 26.520060] i915: Waking up sleeping processes
[ 26.520110] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 19 at 18)
[ 28.649055] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 28.649068] render error detected, EIR: 0x00000000
[ 28.649074] i915: Waking up sleeping processes
[ 28.649105] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 27 at 25)
[ 28.649321] [drm:i915_gem_execbuffer] *ERROR* Execbuf while wedged
[ 29.278977] [drm] LVDS-8: set mode 1280x800 1d
[ 30.991699] [drm] TV-14: set mode NTSC 480i 0
[ 31.131819] [drm] TV-14: set mode NTSC 480i 0
[ 31.398662] [drm] TV-14: set mode NTSC 480i 0
[ 31.538720] [drm] TV-14: set mode NTSC 480i 0
[ 34.492146] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 34.492160] render error detected, EIR: 0x00000000
[ 34.492165] i915: Waking up sleeping processes
[ 34.492212] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 29 at 28)
[ 36.924142] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 36.924155] render error detected, EIR: 0x00000000
[ 36.924161] i915: Waking up sleeping processes
[ 36.924195] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 31 at 30)
[ 37.964143] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 37.964156] render error detected, EIR: 0x00000000
[ 37.964162] i915: Waking up sleeping processes
[ 37.964206] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 51 at 43)
[ 37.964477] [drm:i915_gem_execbuffer] *ERROR* Execbuf while wedged
[ 38.614975] [drm] LVDS-8: set mode 1280x800 1d
[ 40.328245] [drm] TV-14: set mode NTSC 480i 0
[ 40.468890] [drm] TV-14: set mode NTSC 480i 0
[ 40.729046] [drm] TV-14: set mode NTSC 480i 0
[ 40.869468] [drm] TV-14: set mode NTSC 480i 0
[ 43.616142] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 43.616154] render error detected, EIR: 0x00000000
[ 43.616160] i915: Waking up sleeping processes
[ 43.616194] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 53 at 52)
[ 46.016141] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 46.016154] render error detected, EIR: 0x00000000
[ 46.016160] i915: Waking up sleeping processes
[ 46.016482] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 55 at 54)
[ 46.944144] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 46.944157] render error detected, EIR: 0x00000000
[ 46.944163] i915: Waking up sleeping processes
[ 46.944215] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 61 at 58)
[ 47.884138] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 47.884151] render error detected, EIR: 0x00000000
[ 47.884157] i915: Waking up sleeping processes
[ 47.884270] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 63 at 62)
[ 47.884489] [drm:i915_gem_execbuffer] *ERROR* Execbuf while wedged
[ 48.528362] [drm] LVDS-8: set mode 1280x800 1d
[ 50.267848] [drm] TV-14: set mode NTSC 480i 0
[ 50.408207] [drm] TV-14: set mode NTSC 480i 0
[ 50.673479] [drm] TV-14: set mode NTSC 480i 0
[ 50.813731] [drm] TV-14: set mode NTSC 480i 0
[ 53.548141] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 53.548155] render error detected, EIR: 0x00000000
[ 53.548160] i915: Waking up sleeping processes
[ 53.548220] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 75 at 74)
[ 55.680137] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 55.680151] render error detected, EIR: 0x00000000
[ 55.680157] i915: Waking up sleeping processes
[ 55.680188] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 77 at 76)
[ 56.720140] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 56.720154] render error detected, EIR: 0x00000000
[ 56.720160] i915: Waking up sleeping processes
[ 56.720220] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 95 at 89)
[ 58.840139] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 58.840153] render error detected, EIR: 0x00000000
[ 58.840158] i915: Waking up sleeping processes
[ 58.840215] [drm:i915_wait_request] *ERROR* i915_wait_request returns -5 (awaiting 97 at 96)
--- End Message ---