Re: xserver 1.7.5 super slooooow?
Brice Goglin <Brice.Goglin@ens-lyon.org> writes:
>> Apparently Xorg 1.7.5 hit unstable today, and I upgraded, and the first
>> thing I noticed is that it seems _much_ slower. It's not completely
>> unusable, but it's definitely unpleasant
>
> That's surprising. Can you actually downgrade xserver-xorg-core to 1.7.4
> and check whether things are faster ?
As it happens, rebooting seems to have solved the problem...
argh.
If it's worth anything, I've attached a diff of the old ("slow") and new
("working ok") Xorg.0.log files...
-Miles
diff -u /var/log/Xorg.0.log.old /var/log/Xorg.0.log
--- /var/log/Xorg.0.log.old 2010-02-18 17:39:42.000000000 +0900
+++ /var/log/Xorg.0.log 2010-02-18 17:41:01.000000000 +0900
@@ -13,14 +13,14 @@
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
-(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 18 12:01:32 2010
+(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 18 17:40:43 2010
(II) Loader magic: 0x7c1e20
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
-(++) using VT number 8
+(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2e12:1033:88d2 Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfe800000/4194304, 0xd0000000/268435456, I/O @ 0x0000ec00/8
(==) Using default built-in configuration (30 lines)
@@ -158,68 +158,13 @@
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
-(II) Loading sub module "vgahw"
-(II) LoadModule: "vgahw"
-(II) Loading /usr/lib/xorg/modules/libvgahw.so
-(II) Module vgahw: vendor="X.Org Foundation"
- compiled for 1.7.5, module version = 0.1.0
- ABI class: X.Org Video Driver, version 6.0
-(II) Loading sub module "ramdac"
-(II) LoadModule: "ramdac"
-(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
+drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card1
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card2
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card3
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card4
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card5
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card6
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card7
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card8
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card9
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card10
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card11
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card12
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card13
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card14
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card15
-drmOpenByBusid: drmOpenMinor returns -1
-drmOpenDevice: node name is /dev/dri/card0
-drmOpenDevice: node name is /dev/dri/card0
-drmOpenDevice: node name is /dev/dri/card1
-drmOpenDevice: node name is /dev/dri/card2
-drmOpenDevice: node name is /dev/dri/card3
-drmOpenDevice: node name is /dev/dri/card4
-drmOpenDevice: node name is /dev/dri/card5
-drmOpenDevice: node name is /dev/dri/card6
-drmOpenDevice: node name is /dev/dri/card7
-drmOpenDevice: node name is /dev/dri/card8
-drmOpenDevice: node name is /dev/dri/card9
-drmOpenDevice: node name is /dev/dri/card10
-drmOpenDevice: node name is /dev/dri/card11
-drmOpenDevice: node name is /dev/dri/card12
-drmOpenDevice: node name is /dev/dri/card13
-drmOpenDevice: node name is /dev/dri/card14
-drmOpenDevice: node name is /dev/dri/card15
-(EE) intel(0): [drm] Failed to open DRM device for : No such file or directory
-(EE) intel(0): Failed to become DRM master.
+drmOpenDevice: open result is 11, (OK)
+drmOpenByBusid: drmOpenMinor returns 11
+drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
@@ -227,25 +172,8 @@
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Q45/Q43
(--) intel(0): Chipset: "Q45/Q43"
-(--) intel(0): Linear framebuffer at 0xD0000000
-(--) intel(0): IO registers at addr 0xFE800000 size 4194304
-(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
-(II) intel(0): No SDVO device is found in VBT
-(II) intel(0): 2 display pipes available.
-(II) Loading sub module "ddc"
-(II) LoadModule: "ddc"
-(II) Module "ddc" already built-in
-(II) Loading sub module "i2c"
-(II) LoadModule: "i2c"
-(II) Module "i2c" already built-in
-(II) intel(0): Output VGA has no monitor section
-(II) intel(0): I2C bus "CRTDDC_A" initialized.
-(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
-(II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
-(II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
-(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
-(II) intel(0): I2C bus "CRTDDC_A" removed.
-(II) intel(0): EDID for output VGA
+(II) intel(0): Output VGA1 has no monitor section
+(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: NEC Model: 6735 Serial#: 16843009
(II) intel(0): Year: 2008 Week: 46
(II) intel(0): EDID Version: 1.3
@@ -314,13 +242,12 @@
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
-(II) intel(0): EDID vendor "NEC", prod id 26421
-(II) intel(0): Printing probed modes for output VGA
+(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
-(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
+(II) intel(0): Modeline "1280x960"x75.0 129.94 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.2 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
-(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
+(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
@@ -328,17 +255,15 @@
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
+(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
-(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
-(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
+(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
-(II) intel(0): Output VGA connected
+(II) intel(0): Output VGA1 connected
(II) intel(0): Using exact sizes for initial modes
-(II) intel(0): Output VGA using initial mode 1280x1024
+(II) intel(0): Output VGA1 using initial mode 1280x1024
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
-(II) intel(0): detected 512 kB GTT.
-(II) intel(0): detected 32764 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(**) intel(0): Display dimensions: (340, 270) mm
(**) intel(0): DPI set to (95, 96)
@@ -348,19 +273,14 @@
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
-(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
-(II) intel(0): Kernel reported 222976 total, 1 used
-(II) intel(0): I830CheckAvailableMemory: 891900 kB available
-(WW) intel(0): DRI2: failed to open drm device
+(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
-(EE) intel(0): Failed to initialize kernel memory manager
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
-(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
@@ -368,27 +288,12 @@
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
-(WW) intel(0): drmSetMaster failed: Bad file descriptor
-(II) intel(0): Fixed memory allocation layout:
-(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
-(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
-(II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB)
-(II) intel(0): 0x0082a000-0x00d29fff: front buffer (5120 kB) X tiled
-(II) intel(0): 0x10000000: end of aperture
-(II) intel(0): BO memory allocation layout:
-(WW) intel(0): ESR is 0x00000001
-(WW) intel(0): Existing errors found in hardware state.
-(II) intel(0): Output configuration:
-(II) intel(0): Pipe A is on
-(II) intel(0): Display plane A is now enabled and connected to pipe A.
-(II) intel(0): Pipe B is off
-(II) intel(0): Display plane B is now disabled and connected to pipe B.
-(II) intel(0): Output VGA is connected to pipe A
+(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
-(II) intel(0): direct rendering: Failed
+(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
@@ -409,10 +314,12 @@
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
-(II) AIGLX: Screen 0 is not DRI2 capable
-(II) AIGLX: Screen 0 is not DRI capable
-(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
-(II) GLX: Initialized DRISWRAST GL provider for screen 0
+(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
+(II) AIGLX: enabled GLX_SGI_make_current_read
+(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
+(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
+(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
+(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 270
(II) config/udev: Adding input device "Power Button" (/dev/input/event3)
(II) LoadModule: "evdev"
@@ -489,12 +396,6 @@
(EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
(II) UnloadModule: "evdev"
(EE) PreInit returned NULL for ""Macintosh mouse button emulation""
-(II) intel(0): I2C bus "CRTDDC_A" initialized.
-(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
-(II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
-(II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
-(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
-(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "NEC", prod id 26421
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
@@ -517,13 +418,6 @@
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): EDID vendor "NEC", prod id 26421
-(II) intel(0): I2C bus "CRTDDC_A" initialized.
-(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
-(II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
-(II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
-(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
-(II) intel(0): I2C bus "CRTDDC_A" removed.
-(II) intel(0): EDID vendor "NEC", prod id 26421
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
@@ -545,13 +439,6 @@
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): EDID vendor "NEC", prod id 26421
-(II) intel(0): I2C bus "CRTDDC_A" initialized.
-(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
-(II) intel(0): I2C device "CRTDDC_A:DDC control interface" registered at address 0x6E.
-(II) intel(0): I2C device "CRTDDC_A:DDC control interface" removed.
-(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
-(II) intel(0): I2C bus "CRTDDC_A" removed.
-(II) intel(0): EDID vendor "NEC", prod id 26421
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
@@ -572,15 +459,3 @@
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
-(II) intel(0): EDID vendor "NEC", prod id 26421
-(II) "Power Button": Close
-(II) UnloadModule: "evdev"
-(II) "Power Button": Close
-(II) UnloadModule: "evdev"
-(II) "Logitech USB Optical Mouse": Close
-(II) UnloadModule: "evdev"
-(II) "AT Translated Set 2 keyboard": Close
-(II) UnloadModule: "evdev"
-(II) "Macintosh mouse button emulation": Close
-(II) UnloadModule: "evdev"
-(WW) intel(0): drmDropMaster failed: Bad file descriptor
--
Arrest, v. Formally to detain one accused of unusualness.
Reply to: