Bug#569776: xserver-xorg: X hangs on an Omnibook XE2 with the Silicon Motion, Inc. SM810 LynxE (rev a6) chipset
Package: xserver-xorg
Version: 1:7.5+3
Severity: important
Hello,
I can't use Xorg anymore on my HP Omnibook XE2. I used to use vesa which worked,
but now, when I type "startx", X hangs and eats 100% CPU.
I need to kill it with killall Xorg -s SIGKILL via ssh.
The computer does not respond but via ssh.
Looking to the last line of /var/log/Xorg.0.log, you can see :
(II) VESA(0): VESA VBE OEM: S�
This is likely to be the moment of the freeze.
When I use the siliconmotion driver, there is no freeze but it doesn"t worg neither.
I have the same issue on Arch Linux.
My Xorg.0.log when using siliconmotion driver :
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-trunk-686 i686 Debian
Current Operating System: Linux debian 2.6.32-trunk-686 #1 SMP Sun Jan 10 06:32:16 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686 root=UUID=f88bb137-564e-448a-b92b-7d9fc432443f ro quiet
Build Date: 20 January 2010 10:52:55PM
xorg-server 2:1.7.4-2 (bgoglin@debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 14 10:21:46 2010
(II) Loader magic: 0x81e7680
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:0:2:0) 126f:0810:126f:0810 Silicon Motion, Inc. SM810 LynxE rev 166, Mem @ 0xfd000000/16777216
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default siliconmotion Device 0"
Driver "siliconmotion"
EndSection
Section "Screen"
Identifier "Builtin Default siliconmotion Screen 0"
Device "Builtin Default siliconmotion Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default siliconmotion Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default siliconmotion Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default siliconmotion Device 0"
(==) No monitor specified for screen "Builtin Default siliconmotion Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "siliconmotion"
(II) Loading /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
(II) Module siliconmotion: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 1.7.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 0.4.1
ABI class: X.Org Video Driver, version 6.0
(II) SMI: driver (version 1.7.3) for Silicon Motion Lynx chipsets: Lynx,
LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM, Cougar3DR, MSOC
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for siliconmotion
(--) Assigning device section with no busID to primary device
(--) Chipset LynxE found
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 0.0.2
ABI class: X.Org Video Driver, version 6.0
(EE) open /dev/fb0: No such file or directory
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) SMI(0): Creating default Display subsection in Screen section
"Builtin Default siliconmotion Screen 0" for depth/fbbpp 24/32
(==) SMI(0): Depth 24, (--) framebuffer bpp 32
(==) SMI(0): RGB weight 888
(==) SMI(0): Default visual is TrueColor
(==) SMI(0): PCI Burst enabled
(==) SMI(0): PCI Retry enabled
(==) SMI(0): Using Hardware Cursor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) SMI(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) SMI(0): VESA BIOS detected
(II) SMI(0): VESA VBE Version 0.0
(II) SMI(0): VESA VBE Total Mem: 1664 kB
(II) SMI(0): VESA VBE OEM: S�
(--) SMI(0): Chipset: "LynxE"
(==) SMI(0): Dual head disabled
(==) SMI(0): Using XAA acceleration architecture
(--) SMI(0): videoram: 2048kB
(II) SMI(0): Cursor Offset: 001FFC00
(II) SMI(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) SMI(0): Reserved: 001AF800
(II) SMI(0): DSTN Panel Size = 800x600
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) SMI(0): I2C bus "I2C bus" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(==) SMI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SMI(0): MCLK = 54.409
(II) SMI(0): Output LVDS has no monitor section
(II) SMI(0): Not using default mode "640x350" (vrefresh out of range)
(II) SMI(0): Not using default mode "320x175" (doublescan mode not supported)
(II) SMI(0): Not using default mode "640x400" (vrefresh out of range)
(II) SMI(0): Not using default mode "320x200" (doublescan mode not supported)
(II) SMI(0): Not using default mode "720x400" (vrefresh out of range)
(II) SMI(0): Not using default mode "360x200" (doublescan mode not supported)
(II) SMI(0): Not using default mode "640x480" (exceeds panel dimensions)
(II) SMI(0): Not using default mode "320x240" (doublescan mode not supported)
(II) SMI(0): Not using default mode "640x480" (vrefresh out of range)
(II) SMI(0): Not using default mode "320x240" (doublescan mode not supported)
(II) SMI(0): Not using default mode "640x480" (vrefresh out of range)
(II) SMI(0): Not using default mode "320x240" (doublescan mode not supported)
(II) SMI(0): Not using default mode "640x480" (vrefresh out of range)
(II) SMI(0): Not using default mode "320x240" (doublescan mode not supported)
(II) SMI(0): Not using default mode "800x600" (vrefresh out of range)
(II) SMI(0): Not using default mode "400x300" (doublescan mode not supported)
(II) SMI(0): Not using default mode "800x600" (hsync out of range)
(II) SMI(0): Not using default mode "400x300" (doublescan mode not supported)
(II) SMI(0): Not using default mode "800x600" (vrefresh out of range)
(II) SMI(0): Not using default mode "400x300" (doublescan mode not supported)
(II) SMI(0): Not using default mode "800x600" (vrefresh out of range)
(II) SMI(0): Not using default mode "400x300" (doublescan mode not supported)
(II) SMI(0): Not using default mode "800x600" (vrefresh out of range)
(II) SMI(0): Not using default mode "400x300" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1024x768" (interlace mode not supported)
(II) SMI(0): Not using default mode "512x384" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1024x768" (hsync out of range)
(II) SMI(0): Not using default mode "512x384" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SMI(0): Not using default mode "512x384" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SMI(0): Not using default mode "512x384" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SMI(0): Not using default mode "512x384" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1152x864" (vrefresh out of range)
(II) SMI(0): Not using default mode "576x432" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1280x960" (hsync out of range)
(II) SMI(0): Not using default mode "640x480" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1280x960" (vrefresh out of range)
(II) SMI(0): Not using default mode "640x480" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1280x1024" (hsync out of range)
(II) SMI(0): Not using default mode "640x512" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) SMI(0): Not using default mode "640x512" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) SMI(0): Not using default mode "640x512" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1600x1200" (hsync out of range)
(II) SMI(0): Not using default mode "800x600" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) SMI(0): Not using default mode "800x600" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) SMI(0): Not using default mode "800x600" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) SMI(0): Not using default mode "800x600" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) SMI(0): Not using default mode "800x600" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1792x1344" (hsync out of range)
(II) SMI(0): Not using default mode "896x672" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1792x1344" (vrefresh out of range)
(II) SMI(0): Not using default mode "896x672" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1856x1392" (hsync out of range)
(II) SMI(0): Not using default mode "928x696" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1856x1392" (vrefresh out of range)
(II) SMI(0): Not using default mode "928x696" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1920x1440" (hsync out of range)
(II) SMI(0): Not using default mode "960x720" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) SMI(0): Not using default mode "960x720" (doublescan mode not supported)
(II) SMI(0): Not using default mode "832x624" (vrefresh out of range)
(II) SMI(0): Not using default mode "416x312" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1152x864" (hsync out of range)
(II) SMI(0): Not using default mode "576x432" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1152x864" (vrefresh out of range)
(II) SMI(0): Not using default mode "576x432" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1152x864" (vrefresh out of range)
(II) SMI(0): Not using default mode "576x432" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1152x864" (vrefresh out of range)
(II) SMI(0): Not using default mode "576x432" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1152x864" (vrefresh out of range)
(II) SMI(0): Not using default mode "576x432" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1152x864" (vrefresh out of range)
(II) SMI(0): Not using default mode "576x432" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1360x768" (hsync out of range)
(II) SMI(0): Not using default mode "680x384" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1360x768" (hsync out of range)
(II) SMI(0): Not using default mode "680x384" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1400x1050" (hsync out of range)
(II) SMI(0): Not using default mode "700x525" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) SMI(0): Not using default mode "700x525" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) SMI(0): Not using default mode "700x525" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) SMI(0): Not using default mode "700x525" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1440x900" (hsync out of range)
(II) SMI(0): Not using default mode "720x450" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1600x1024" (hsync out of range)
(II) SMI(0): Not using default mode "800x512" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1680x1050" (hsync out of range)
(II) SMI(0): Not using default mode "840x525" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1680x1050" (hsync out of range)
(II) SMI(0): Not using default mode "840x525" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) SMI(0): Not using default mode "840x525" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) SMI(0): Not using default mode "840x525" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) SMI(0): Not using default mode "840x525" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1920x1080" (hsync out of range)
(II) SMI(0): Not using default mode "960x540" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1920x1200" (hsync out of range)
(II) SMI(0): Not using default mode "960x600" (doublescan mode not supported)
(II) SMI(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) SMI(0): Not using default mode "960x720" (doublescan mode not supported)
(II) SMI(0): Not using default mode "2048x1536" (hsync out of range)
(II) SMI(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) SMI(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) SMI(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) SMI(0): Not using default mode "2048x1536" (vrefresh out of range)
(II) SMI(0): Not using default mode "1024x768" (doublescan mode not supported)
(II) SMI(0): Printing probed modes for output LVDS
(II) SMI(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
(II) SMI(0): Output LVDS connected
(II) SMI(0): Using fuzzy aspect match for initial modes
(II) SMI(0): Output LVDS using initial mode 800x600
(II) SMI(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(EE) SMI(0): Not enough video memory for the configured screen size (800x800) and color depth.
(II) UnloadModule: "siliconmotion"
(II) UnloadModule: "vbe"
(II) Unloading /usr/lib/xorg/modules/libvbe.so
(II) UnloadModule: "int10"
(II) Unloading /usr/lib/xorg/modules/libint10.so
(II) UnloadModule: "vgahw"
(II) Unloading /usr/lib/xorg/modules/libvgahw.so
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Feb 14 10:19 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1710344 Jan 21 00:01 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Silicon Motion, Inc. SM810 LynxE (rev a6)
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 2855 Feb 14 10:27 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf when using VESA :
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection
Section "Module"
Load "glx"
Load "dbe"
Load "extmod"
Load "dri2"
Load "record"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "pci_burst" # [<bool>]
#Option "pci_retry" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "MCLK" # <freq>
#Option "MXCLK" # <freq>
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "VideoKey" # <i>
#Option "ByteSwap" # [<bool>]
#Option "Interlaced" # [<bool>]
#Option "UseBIOS" # [<bool>]
#Option "Dualhead" # [<bool>]
#Option "AccelMethod" # <str>
#Option "PanelSize" # [<str>]
#Option "UseFBDev" # [<bool>]
#Option "CSCVideo" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "Silicon Motion, Inc."
BoardName "SM810 LynxE"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 6641 Feb 14 10:28 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log when using VESA:
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-trunk-686 i686 Debian
Current Operating System: Linux debian 2.6.32-trunk-686 #1 SMP Sun Jan 10 06:32:16 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686 root=UUID=f88bb137-564e-448a-b92b-7d9fc432443f ro quiet
Build Date: 20 January 2010 10:52:55PM
xorg-server 2:1.7.4-2 (bgoglin@debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 14 10:28:17 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins,
/usr/share/fonts/X11/misc,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e7680
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 7
(--) PCI:*(0:0:2:0) 126f:0810:126f:0810 Silicon Motion, Inc. SM810 LynxE rev 166, Mem @ 0xfd000000/16777216
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 0.0
(II) VESA(0): VESA VBE Total Mem: 1664 kB
(II) VESA(0): VESA VBE OEM: S�
udev information:
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: char/13:64
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: MAJOR=13
E: MINOR=64
E: DEVNAME=/dev/input/event0
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: DEVLINKS=/dev/char/13:64 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: XKBLAYOUT=fr
E: x11_driver=evdev
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1
N: input/event1
S: char/13:65
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1
E: MAJOR=13
E: MINOR=65
E: DEVNAME=/dev/input/event1
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: DEVLINKS=/dev/char/13:65
E: XKBLAYOUT=fr
E: x11_driver=evdev
P: /devices/platform/pcspkr/input/input2/event2
N: input/event2
S: char/13:66
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input2/event2
E: MAJOR=13
E: MINOR=66
E: DEVNAME=/dev/input/event2
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DEVLINKS=/dev/char/13:66 /dev/input/by-path/platform-pcspkr-event-spkr
P: /devices/platform/i8042/serio1/input/input3/event3
N: input/event3
S: char/13:67
S: input/by-path/platform-i8042-serio-1-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio1/input/input3/event3
E: MAJOR=13
E: MINOR=67
E: DEVNAME=/dev/input/event3
E: SUBSYSTEM=input
E: ID_INPUT=1
E: ID_INPUT_TOUCHPAD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-1
E: x11_driver=synaptics
E: DEVLINKS=/dev/char/13:67 /dev/input/by-path/platform-i8042-serio-1-event-mouse
DRM Information from dmesg:
[ 79.382499] [<c10f1eb9>] ? sysfs_addrm_finish+0x13/0x199
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-trunk-686 (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg depends on:
ii libc6 2.10.2-2 GNU C Library: Shared libraries
ii x11-xkb-utils 7.5+1 X11 XKB utilities
ii xkb-data 1.7-2 X Keyboard Extension (XKB) configu
ii xserver-xorg-core 2:1.7.4-2 Xorg X server - core server
ii xserver-xorg-input-al 1:7.5+3 the X.Org X server -- input driver
ii xserver-xorg-input-ev 1:2.3.2-3 X.Org X server -- evdev input driv
ii xserver-xorg-input-sy 1.2.1-1 Synaptics TouchPad driver for X.Or
ii xserver-xorg-input-wa 0.10.3+20100109-1 X.Org X server -- Wacom input driv
ii xserver-xorg-video-al 1:7.5+3 the X.Org X server -- output drive
ii xserver-xorg-video-ap 1:1.2.2-1 X.Org X server -- APM display driv
ii xserver-xorg-video-ar 1:0.7.2-1 X.Org X server -- ark display driv
ii xserver-xorg-video-at 1:6.12.4-3 X.Org X server -- ATI display driv
ii xserver-xorg-video-ch 1:1.2.2-1 X.Org X server -- Chips display dr
ii xserver-xorg-video-ci 1:1.3.2-1 X.Org X server -- Cirrus display d
ii xserver-xorg-video-fb 1:0.4.1-1 X.Org X server -- fbdev display dr
ii xserver-xorg-video-i1 1:1.3.3-1 X.Org X server -- i128 display dri
ii xserver-xorg-video-i7 1:1.3.2-1 X.Org X server -- i740 display dri
ii xserver-xorg-video-in 2:2.9.1-2 X.Org X server -- Intel i8xx, i9xx
ii xserver-xorg-video-ma 6.8.2-2 X.Org X server -- ATI Mach64 displ
ii xserver-xorg-video-mg 1:1.4.11.dfsg-2 X.Org X server -- MGA display driv
ii xserver-xorg-video-ne 1:1.2.4-2 X.Org X server -- Neomagic display
ii xserver-xorg-video-nv 1:2.1.15-1 X.Org X server -- NV display drive
ii xserver-xorg-video-op 1:0.2.904+svn827-1 X.Org X server -- VIA display driv
ii xserver-xorg-video-r1 6.8.1-2 X.Org X server -- ATI r128 display
ii xserver-xorg-video-ra 1:6.12.4-3 X.Org X server -- ATI Radeon displ
ii xserver-xorg-video-ra 1.3.0-2 X.Org X server -- AMD/ATI r5xx, r6
ii xserver-xorg-video-re 1:4.2.3-1 X.Org X server -- Rendition displa
ii xserver-xorg-video-s3 1:0.6.3-1 X.Org X server -- legacy S3 displa
ii xserver-xorg-video-s3 1:1.10.4-1 X.Org X server -- S3 ViRGE display
ii xserver-xorg-video-sa 1:2.3.1-1 X.Org X server -- Savage display d
ii xserver-xorg-video-si 1:1.7.3-1 X.Org X server -- SiliconMotion di
ii xserver-xorg-video-si 1:0.10.2-1 X.Org X server -- SiS display driv
ii xserver-xorg-video-si 1:0.9.3-1 X.Org X server -- SiS USB display
ii xserver-xorg-video-td 1:1.4.3-1 X.Org X server -- tdfx display dri
ii xserver-xorg-video-tr 1:1.3.3-1 X.Org X server -- Trident display
ii xserver-xorg-video-ts 1:1.2.3-1 X.Org X server -- Tseng display dr
ii xserver-xorg-video-v4 1:0.2.0-4 X.Org X server -- Video 4 Linux di
ii xserver-xorg-video-ve 1:2.3.0-1 X.Org X server -- VESA display dri
ii xserver-xorg-video-vm 1:10.16.9-1 X.Org X server -- VMware display d
ii xserver-xorg-video-vo 1:1.2.3-1 X.Org X server -- Voodoo display d
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 7.6.1-1 A free implementation of the OpenG
xserver-xorg suggests no packages.
-- no debconf information
Reply to: