xserver-xorg-video-s3: Changes to 'debian-unstable'
ChangeLog | 50 +++++
Makefile.am | 2
README | 20 ++
configure.ac | 7
debian/README.source | 73 ++++++++
debian/changelog | 9 +
debian/control | 2
debian/xserver-xorg-video-s3.install | 2
debian/xsfbs/xsfbs.sh | 12 -
man/Makefile.am | 58 ++++++
man/s3.man | 240 ++++++++++++++++++++++++++
src/Makefile.am | 3
src/s3.h | 21 +-
src/s3_driver.c | 315 +++++++++++++----------------------
src/s3_shadow.c | 274 ++++++++++++++++++++++++++++++
src/s3_video.c | 22 ++
16 files changed, 893 insertions(+), 217 deletions(-)
New commits:
commit 03319cf8cfb94c2e20c8c26546105b450d73441e
Author: Brice Goglin <bgoglin@debian.org>
Date: Mon Jul 20 18:42:15 2009 +0200
New upstream release
diff --git a/debian/changelog b/debian/changelog
index 345c35b..1dd3c25 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,11 +1,11 @@
-xserver-xorg-video-s3 (1:0.6.2-1) UNRELEASED; urgency=low
+xserver-xorg-video-s3 (1:0.6.2-1) unstable; urgency=low
* Add README.source, bump Standards-Version to 3.8.2.
* New upstream release.
+ Fix 24bits support (for Virtual PC 2007), closes: #470408.
* Install the s3.4 manpage, closes: #374059.
- -- Brice Goglin <bgoglin@debian.org> Mon, 20 Jul 2009 18:41:42 +0200
+ -- Brice Goglin <bgoglin@debian.org> Mon, 20 Jul 2009 18:42:04 +0200
xserver-xorg-video-s3 (1:0.6.1-2) unstable; urgency=low
commit d4a6b26c545261efc6e8bffa32cec163d822f10b
Author: Brice Goglin <bgoglin@debian.org>
Date: Mon Jul 20 18:41:50 2009 +0200
Install the s3.4 manpage
diff --git a/debian/changelog b/debian/changelog
index 79395d1..345c35b 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -3,8 +3,9 @@ xserver-xorg-video-s3 (1:0.6.2-1) UNRELEASED; urgency=low
* Add README.source, bump Standards-Version to 3.8.2.
* New upstream release.
+ Fix 24bits support (for Virtual PC 2007), closes: #470408.
+ * Install the s3.4 manpage, closes: #374059.
- -- Brice Goglin <bgoglin@debian.org> Mon, 20 Jul 2009 18:39:35 +0200
+ -- Brice Goglin <bgoglin@debian.org> Mon, 20 Jul 2009 18:41:42 +0200
xserver-xorg-video-s3 (1:0.6.1-2) unstable; urgency=low
diff --git a/debian/xserver-xorg-video-s3.install b/debian/xserver-xorg-video-s3.install
index daf7bfe..614cfb4 100644
--- a/debian/xserver-xorg-video-s3.install
+++ b/debian/xserver-xorg-video-s3.install
@@ -1 +1,2 @@
usr/lib/xorg/modules/drivers/*.so
+usr/share/man/man4/*
commit c06dce7282a93f639c544570b1bb3f7c5e44a020
Author: Brice Goglin <bgoglin@debian.org>
Date: Mon Jul 20 18:27:41 2009 +0200
New upstream release
diff --git a/debian/changelog b/debian/changelog
index f22a413..79395d1 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,8 +1,10 @@
-xserver-xorg-video-s3 (1:0.6.1-3) UNRELEASED; urgency=low
+xserver-xorg-video-s3 (1:0.6.2-1) UNRELEASED; urgency=low
* Add README.source, bump Standards-Version to 3.8.2.
+ * New upstream release.
+ + Fix 24bits support (for Virtual PC 2007), closes: #470408.
- -- Brice Goglin <bgoglin@debian.org> Mon, 20 Jul 2009 18:24:36 +0200
+ -- Brice Goglin <bgoglin@debian.org> Mon, 20 Jul 2009 18:39:35 +0200
xserver-xorg-video-s3 (1:0.6.1-2) unstable; urgency=low
commit 3c22f7b1d9826f1cd50e3e5bdb7691e4696b32d0
Author: Brice Goglin <bgoglin@debian.org>
Date: Mon Jul 20 18:25:58 2009 +0200
Don't try to install usr/share/xserver-xorg/pci/* anymore
diff --git a/debian/xserver-xorg-video-s3.install b/debian/xserver-xorg-video-s3.install
index a8fac35..daf7bfe 100644
--- a/debian/xserver-xorg-video-s3.install
+++ b/debian/xserver-xorg-video-s3.install
@@ -1,2 +1 @@
usr/lib/xorg/modules/drivers/*.so
-usr/share/xserver-xorg/pci/*
commit 075119cef82e731f8d1498c53141d7e383b8ef61
Author: Brice Goglin <bgoglin@debian.org>
Date: Mon Jul 20 18:25:06 2009 +0200
Adding README.source means we can bump Standards-Version
diff --git a/debian/changelog b/debian/changelog
index 3e813c6..f22a413 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,9 @@
+xserver-xorg-video-s3 (1:0.6.1-3) UNRELEASED; urgency=low
+
+ * Add README.source, bump Standards-Version to 3.8.2.
+
+ -- Brice Goglin <bgoglin@debian.org> Mon, 20 Jul 2009 18:24:36 +0200
+
xserver-xorg-video-s3 (1:0.6.1-2) unstable; urgency=low
* Upload to unstable.
diff --git a/debian/control b/debian/control
index 2d74b55..c054ce4 100644
--- a/debian/control
+++ b/debian/control
@@ -18,7 +18,7 @@ Build-Depends:
automake,
libtool,
xutils-dev
-Standards-Version: 3.7.3
+Standards-Version: 3.8.2
Vcs-Git: git://git.debian.org/git/pkg-xorg/driver/xserver-xorg-video-s3
Vcs-Browser: http://git.debian.org/?p=pkg-xorg/driver/xserver-xorg-video-s3.git
commit aa955eda7b6fddd12b163ee66367ecc998f82ae0
Author: Adam Jackson <ajax@redhat.com>
Date: Thu Jul 2 11:33:54 2009 -0400
s3 0.6.2
diff --git a/configure.ac b/configure.ac
index ce47a1f..c2cc3df 100644
--- a/configure.ac
+++ b/configure.ac
@@ -22,7 +22,7 @@
AC_PREREQ(2.57)
AC_INIT([xf86-video-s3],
- 0.6.1,
+ 0.6.2,
[https://bugs.freedesktop.org/enter_bug.cgi?product=xorg],
xf86-video-s3)
commit 2b83d07b90efd15756cf8c4c80f7f60c0e7cee2a
Author: Evgeny M. Zubok <evgeny.zubok@tochka.ru>
Date: Thu Jun 25 19:48:34 2009 +0400
Revert the using of BIOS defaults for the VRAM/DRAM timings
diff --git a/ChangeLog b/ChangeLog
index a13d5b4..ad0b227 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,13 @@
+2009-06-25 Evgeny M. zubok <evgeny.zubok@tochka.ru>
+
+ * src/s3_driver.c:
+ Revert the old behaviour when the BIOS settings are used for
+ intialization of DRAM/VRAM timings, i. e. we don't touch the
+ timings during initialization phase until any memory option (like
+ slow_edodram) is specified.
+
+ Add manual page.
+
2009-05-25 Evgeny M. Zubok <evgeny.zubok@tochka.ru>
* src/s3_driver.c:
@@ -20,7 +30,7 @@
* src/s3_shadow.c:
Add shadowFB option. It can be used to speedup drawing when
- hardware acceleration is unwanted or unavailable (for colour depth
+ hardware acceleration is undesirable or unavailable (for colour depth
24 with 24 bpp framebuffer, for example). shadowFB is disabled by
default. Enabling shadowFB option disables HW acceleration. Thanks
to Egor Ivanov for initial porting of shadowFB from s3virge.
diff --git a/man/s3.man b/man/s3.man
index acbd0c9..9109c2a 100644
--- a/man/s3.man
+++ b/man/s3.man
@@ -51,7 +51,7 @@ driver supports PCI video cards based on the following S3 chips:
.PP
Also driver supports the following RAMDACs:
.TP 12
-.B IBM 524A
+.B IBM 524, IBM 524A, IBM 526, IBM 526DB
.TP 12
.B TI ViewPoint 3025
@@ -163,9 +163,9 @@ lower either the resolution or framebuffer's depth or both before the
viewing, otherwise, you will get the allocation error and will not see
the video. For example, with 24 bpp framebuffer and the same
resolution 800x600 the offscreen area will be about 640 kB - it's
-enough for the 640x480 frame. 800x600 with the 16bpp framebuffer gives
-about 1110 kB of offscreen area - this allows to upscale up to 768x576
-movies. Note, that all movie resolutions in examples above are
+enough for the 640x480 frame. 800x600 with the 16 bpp framebuffer
+gives about 1110 kB of offscreen area - this allows to upscale up to
+768x576 movies. Note, that all movie resolutions in examples above are
provided as a reference; the movies can have the different aspect
ratios and non-standard dimensions. A total pixel amount is the main
consideration not the certain width and height.
@@ -212,12 +212,12 @@ cycle).
.BI "Option \*qslow_edodram\*q \*q" boolean \*q
Switch to 2-cycle EDO mode. Try this if you encounter pixel
corruption. Using this option will cause a decrease in
-performance. Default: off (1-cycle EDO mode).
+performance. Default: off (BIOS defaults).
.TP
.BI "Option \*qslow_dram\*q \*q" boolean \*q
For Trio and Aurora64V+ chips: increase -RAS Precharge Timing to 3.5
-MCLK. Try this option if you encounter pixel errors. Default: off (2.5
-MCLK).
+MCLK. Try this option if you encounter pixel errors. Default: off
+(BIOS defaults).
.TP
.BI "Option \*qslow_vram\*q \*q" boolean \*q
For Vision964, Vision968 chips: increase -RAS Low Timing to 4.5
diff --git a/src/s3_driver.c b/src/s3_driver.c
index 5d6623f..d5b01bf 100644
--- a/src/s3_driver.c
+++ b/src/s3_driver.c
@@ -1659,35 +1659,14 @@ static Bool S3ModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode)
new->cr66 |= 0x80;
outb(vgaCRReg, new->cr66);
+
if (pS3->SlowDRAMRefresh)
new->cr3a = 0xb7;
- else
+ else
new->cr3a = 0xb5;
outb(vgaCRIndex, 0x3a);
outb(vgaCRReg, new->cr3a);
- /*
- Set 3.5 MCLKs for -RAS low, 2.5 MCLKs for -RAS precharge,
- disable -CAS/-OE adjustment. It seems that cr68 has different
- format for 96x and TRIOs
- */
- if (!((pS3->Chipset == PCI_CHIP_968) ||
- (pS3->Chipset == PCI_CHIP_964_0) ||
- (pS3->Chipset == PCI_CHIP_964_1))) {
-
- outb(vgaCRIndex, 0x39);
- outb(vgaCRReg, 0xa5);
-
- outb(vgaCRIndex, 0x68);
- tmp = inb(vgaCRReg) & ~0x0f;
- outb(vgaCRReg, tmp | 0x0f);
-
- /* Enable 1-cycle EDO access */
- outb(vgaCRIndex, 0x36);
- tmp = inb(vgaCRReg);
- outb(vgaCRReg, tmp & 0xf3);
- }
-
if (pS3->SlowVRAM) {
/*
* some Diamond Stealth 64 VRAM cards have a problem with
commit bf6bdcc1220f3ed8c636e869c4b13e27923a139e
Author: Evgeny M. Zubok <evgeny.zubok@tochka.ru>
Date: Thu Jun 25 01:57:06 2009 +0400
Add manual page.
diff --git a/Makefile.am b/Makefile.am
index 16f4412..7052905 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -19,4 +19,4 @@
# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
AUTOMAKE_OPTIONS = foreign
-SUBDIRS = src
+SUBDIRS = src man
diff --git a/configure.ac b/configure.ac
index 67479ed..ce47a1f 100644
--- a/configure.ac
+++ b/configure.ac
@@ -83,7 +83,10 @@ AC_SUBST([DRIVER_NAME])
XORG_MANPAGE_SECTIONS
XORG_RELEASE_VERSION
+XORG_CHECK_LINUXDOC
+
AC_OUTPUT([
Makefile
src/Makefile
+ man/Makefile
])
diff --git a/man/Makefile.am b/man/Makefile.am
new file mode 100644
index 0000000..f0eb29b
--- /dev/null
+++ b/man/Makefile.am
@@ -0,0 +1,58 @@
+#
+# Copyright 2005 Sun Microsystems, Inc. All rights reserved.
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation.
+#
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+# IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
+# OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+# OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the copyright holders shall
+# not be used in advertising or otherwise to promote the sale, use or
+# other dealings in this Software without prior written authorization
+# from the copyright holders.
+#
+
+drivermandir = $(DRIVER_MAN_DIR)
+
+driverman_PRE = @DRIVER_NAME@.man
+
+driverman_DATA = $(driverman_PRE:man=@DRIVER_MAN_SUFFIX@)
+
+EXTRA_DIST = @DRIVER_NAME@.man
+
+CLEANFILES = $(driverman_DATA)
+
+SED = sed
+
+# Strings to replace in man pages
+XORGRELSTRING = @PACKAGE_STRING@
+ XORGMANNAME = X Version 11
+
+MAN_SUBSTS = \
+ -e 's|__vendorversion__|"$(XORGRELSTRING)" "$(XORGMANNAME)"|' \
+ -e 's|__xorgversion__|"$(XORGRELSTRING)" "$(XORGMANNAME)"|' \
+ -e 's|__xservername__|Xorg|g' \
+ -e 's|__xconfigfile__|xorg.conf|g' \
+ -e 's|__projectroot__|$(prefix)|g' \
+ -e 's|__appmansuffix__|$(APP_MAN_SUFFIX)|g' \
+ -e 's|__drivermansuffix__|$(DRIVER_MAN_SUFFIX)|g' \
+ -e 's|__adminmansuffix__|$(ADMIN_MAN_SUFFIX)|g' \
+ -e 's|__miscmansuffix__|$(MISC_MAN_SUFFIX)|g' \
+ -e 's|__filemansuffix__|$(FILE_MAN_SUFFIX)|g'
+
+SUFFIXES = .$(DRIVER_MAN_SUFFIX) .man
+
+.man.$(DRIVER_MAN_SUFFIX):
+ sed $(MAN_SUBSTS) < $< > $@
diff --git a/man/s3.man b/man/s3.man
new file mode 100644
index 0000000..acbd0c9
--- /dev/null
+++ b/man/s3.man
@@ -0,0 +1,240 @@
+.\" shorthand for double quote that works everywhere.
+.ds q \N'34'
+.TH s3 __drivermansuffix__ __vendorversion__
+.SH NAME
+s3 \- S3 video driver
+.SH SYNOPSIS
+.B Section \*qDevice\*q
+.RS 2
+.B Identifier \*q\fIdevname\fP\*q
+.br
+.B Driver \*qs3\*q
+.br
+.B ...
+.br
+[\fBOption\fP "optionname" ["optionvalue"]]
+.RE
+.B EndSection
+
+.SH SUPPORTED HARDWARE
+The
+.B s3
+driver supports PCI video cards based on the following S3 chips:
+.TP 12
+.B Trio32
+86C732
+.TP 12
+.B Trio64
+86C764
+.TP 12
+.B Trio64V+
+86C765
+.TP 12
+.B Aurora64V+
+86CM65
+.TP 12
+.B Trio64UV+
+86C767
+.TP 12
+.B Trio64V2/DX
+86C775
+.TP 12
+.B Trio64V2/GX
+86C785
+.TP 12
+.B Vision964
+86C964
+.TP 12
+.B Vision968
+86C968
+
+.PP
+Also driver supports the following RAMDACs:
+.TP 12
+.B IBM 524A
+.TP 12
+.B TI ViewPoint 3025
+
+.SH DESCRIPTION
+\fBs3\fP is an __xservername__ driver for S3 based video cards. The
+driver provides full accelerated support for the following colour
+depths: 8, 15, 16 and 24. The overlay video (Xv) is supported in
+depths 16 and 24 for the Trio64V+, Trio64UV+, Trio64V2/DX and
+Trio64V2/GX chips.
+
+.SH CONFIGURATION DETAILS
+Please refer to __xconfigfile__(__filemansuffix__) for general
+configuration details. This section only covers configuration details
+specific to this driver. All options names are case and white space
+insensitive when parsed by the server, for example, "trio 32/64" and
+"Trio32/64" are equivalent.
+
+.SS
+Chip overriding
+.PP
+The driver auto-detects the chipset and RAMDAC, but the following
+\fBChipset\fP names may optionally be specified in the configuration
+file \fB\*qDevice\*q\fP section, and will override the auto-detection:
+
+.PP
+.RS 4
+.TP 18
+"964-0", "964-1"
+86C964 (rev.0 and rev.1)
+.TP 18
+"968"
+86C968
+.TP 18
+"Trio32/64"
+86C732/86C764
+.TP 18
+"Aurora64V+"
+86CM65
+.TP 18
+"Trio64UV+"
+86C767
+.TP 18
+"Trio64V2/DX/GX"
+86C775/86C785
+.RE
+
+.PP
+The 86C765 (Trio64V+) is \fBChipset\fP "Trio32/64" with \fBChipRev\fP
+greater or equal 0x40.
+
+An overriding of RAMDAC auto-detection currently is not implemented.
+
+.SS
+Colour depth
+.PP
+For every supported colour depth the X server automatically selects an
+appropriate number of bits per pixel (bpp) for framebuffer. The depth
+8 is represented by 8 bpp framebuffer (1 byte/pixel), the depths 15
+and 16 (respectively 5.5.5 and 5.6.5 pixel formats) are represented by
+the 16 bpp framebuffer (2 bytes/pixel). Whenever the depth 24 is
+configured, the X server by default uses the 32 bpp framebuffer (4
+bytes/pixel), and the hardware is adjusted accordingly to the X.8.8.8
+pixel format, where X is the ignored upper byte.
+
+.PP
+As the second option for the depth 24, the X server can be configured
+to use 24 bpp framebuffer with the 8.8.8 pixel format (3 bytes/pixel),
+which is supported by Trio64V+, Trio64UV+, Trio64V2/DX and
+Trio64V2/GX. If the video board has limited video RAM the 24 bpp
+framebuffer has an advantage over 32 bpp framebuffer as it requires
+less memory to store screen, and, therefore, more space will be
+available for a video frame (see "Overlay video" section). The 24 bpp
+framebuffer can be selected by X server's option \fB-fbbpp 24\fP or by
+specifying \fBDefaultFbBpp\fP option in
+__xconfigfile__(__filemansuffix__):
+
+.RS 4
+.B Section \*qScreen\*q
+.RS 2
+.B DefaultFbBpp 24
+.br
+.B DefaultDepth 24
+.br
+.B ...
+.RE
+.B EndSection
+.RE
+
+.PP
+However, the 24 bpp framebuffer mode has the hardware limitations: (i)
+the 2D acceleration doesn't work with this mode (use the
+\fB\*qshadowFB\*q\fP option to speed up drawing routines in this
+case); (ii) 24 bpp framebuffer cannot be used with either interlaced
+or doublescan graphics modes.
+
+.SS
+Overlay video
+.PP
+If your video board has limited RAM it would be useful to estimate how
+large video frame might be placed in offscreen video memory. Suppose
+that the video board has 2 MB of RAM, and X server is configured to
+display 800x600 with the depth 24. By default the 32 bpp framebuffer
+will be chosen for this depth, so 800 x 600 x 4 = 1875 kB will be
+reserved for screen, and 2 MB - 1875 kB = 173 kB will remain for the
+offscreen area. This is sufficient space, for example, for the VCD
+NTSC 352x240 frame. If you need to upscale video with a bigger frame,
+but it doesn't fit the offscreen area, the only way to do this is to
+lower either the resolution or framebuffer's depth or both before the
+viewing, otherwise, you will get the allocation error and will not see
+the video. For example, with 24 bpp framebuffer and the same
+resolution 800x600 the offscreen area will be about 640 kB - it's
+enough for the 640x480 frame. 800x600 with the 16bpp framebuffer gives
+about 1110 kB of offscreen area - this allows to upscale up to 768x576
+movies. Note, that all movie resolutions in examples above are
+provided as a reference; the movies can have the different aspect
+ratios and non-standard dimensions. A total pixel amount is the main
+consideration not the certain width and height.
+.PP
+Due to hardware limitation the overlay video will not work with the
+interlaced/doublescan modes. Downscaling is not implemented in
+hardware.
+
+.SS
+Configuration options
+.PP
+The following display
+.B Options
+are supported:
+.TP
+.BI "Option \*qHWCursor\*q \*q" boolean \*q
+Enable or disable the hardware cursor. Currently, hardware cursor is
+not implemented, so the option will be ignored. Default: off (software
+cursor).
+.TP
+.BI "Option \*qNoAccel\*q \*q" boolean \*q
+Disable acceleration. Very useful for determining if the driver has
+problems with drawing and acceleration routines. This is the first
+option to try if your server runs but you see graphic corruption on
+the screen. Using it decreases performance, as it uses software
+emulation for drawing operations the video driver can accelerate with
+hardware. Default: off (acceleration is enabled).
+.TP
+.BI "Option \*qShadowFB\*q \*q" boolean \*q
+Use shadow framebuffer. Disables hardware acceleration. Use this
+option when the hardware acceleration is not available or
+undesirable. Default: off.
+.TP
+.BI "Option \*qXVideo\*q \*q" boolean \*q
+Enable or disable Xv support. Default: on.
+
+.PP
+The following video memory \fBOptions\fP are supported:
+.TP
+.BI "Option \*qslow_dram_refresh\*q \*q" boolean \*q
+Enable three refresh cycles per scanline. Default: off (one refresh
+cycle).
+.TP
+.BI "Option \*qslow_edodram\*q \*q" boolean \*q
+Switch to 2-cycle EDO mode. Try this if you encounter pixel
+corruption. Using this option will cause a decrease in
+performance. Default: off (1-cycle EDO mode).
+.TP
+.BI "Option \*qslow_dram\*q \*q" boolean \*q
+For Trio and Aurora64V+ chips: increase -RAS Precharge Timing to 3.5
+MCLK. Try this option if you encounter pixel errors. Default: off (2.5
+MCLK).
+.TP
+.BI "Option \*qslow_vram\*q \*q" boolean \*q
+For Vision964, Vision968 chips: increase -RAS Low Timing to 4.5
+MCLK. Default: off (BIOS defaults).
+
+.SH SEE ALSO
+__xservername__(1), __xconfigfile__(__filemansuffix__), Xserver(1),
+X(__miscmansuffix__)
+
+.SH AUTHORS
+Thomas Roell, Mark Vojkovich, Kevin E. Martin, Amancio Hasty, Jon
+N. Tombs and others were the original authors of driver for XFree86
+3.x. Ani Joshi reworked driver for XFree86 4.x. The further
+modifications were made by the following contributors: Adam Jackson,
+Alan Coopersmith, Dave Airlie, Andrew Radrianasulu, Paulo Cesar
+Pereira de Andrade, Eric Anholt, Søren Sandmann Pedersen, Alex
+Deucher, Evgeny M. Zubok, Daniel Stone and others.
+
+.PP
+The manual was written by Evgeny M. Zubok <evgeny.zubok@tochka.ru>
commit 8f72294ada477f003888b6776883c1dd98289f3f
Author: Julien Cristau <jcristau@debian.org>
Date: Wed Jun 3 03:37:37 2009 +0200
Kill custom readlink function
This was needed for very, very old versions of debianutils.
Closes: #498890
diff --git a/debian/xsfbs/xsfbs.sh b/debian/xsfbs/xsfbs.sh
index 197eb74..781826f 100644
--- a/debian/xsfbs/xsfbs.sh
+++ b/debian/xsfbs/xsfbs.sh
@@ -303,16 +303,6 @@ EOF
fi
}
-# we require a readlink command or shell function
-if ! which readlink > /dev/null 2>&1; then
- message "The readlink command was not found. Please install version" \
- "1.13.1 or later of the debianutils package."
- readlink () {
- # returns what symlink in $1 actually points to
- perl -e '$l = shift; exit 1 unless -l $l; $r = readlink $l; exit 1 unless $r; print "$r\n"' "$1"
- }
-fi
-
check_symlink () {
# syntax: check_symlink symlink
#
commit 003d36e18e32b656c1dc309c5238fa5b4804c58e
Author: Adam Jackson <ajax@redhat.com>
Date: Thu May 28 15:14:38 2009 -0400
Remove useless loader symbol lists.
diff --git a/src/s3_driver.c b/src/s3_driver.c
index 7869da7..5d6623f 100644
--- a/src/s3_driver.c
+++ b/src/s3_driver.c
@@ -183,71 +183,6 @@ RamDacSupportedInfoRec S3IBMRamdacs[] = {
{ -1 }
};
-static const char *fbSymbols[] = {
- "fbPictureInit",
- "fbScreenInit",
- NULL
-};
-
-static const char *vgaHWSymbols[] = {
- "vgaHWGetHWRec",
- "vgaHWFreeHWRec",
- "vgaHWGetIOBase",
- "vgaHWSave",
- "vgaHWProtect",
- "vgaHWRestore",
- "vgaHWMapMem",
- "vgaHWUnmapMem",
- "vgaHWSaveScreen",
- "vgaHWLock",
- "vgaHWInit",
- "vgaHWDPMSSet",
- NULL
-};
-
-static const char *vbeSymbols[] = {
- "VBEInit",
- "vbeDoEDID",
- "vbeFree",
- NULL
-};
-
-static const char *shadowSymbols[] = {
- "ShadowFBInit",
- NULL
-};
-
-
-static const char *int10Symbols[] = {
- "xf86ExecX86int10",
- "xf86FreeInt10",
- "xf86InitInt10",
- "xf86Int10AllocPages",
- "xf86Int10FreePages",
- NULL
-};
-
-static const char *ramdacSymbols[] = {
- "xf86InitCursor",
- "xf86CreateCursorInfoRec",
- "RamDacInit",
- "RamDacCreateInfoRec",
- "RamDacDestroyInfoRec",
- "RamDacHelperCreateInfoRec",
- "RamDacGetHWIndex",
- "IBMramdacProbe",
- "IBMramdac526CalculateMNPCForClock",
- "IBMramdac526SetBppWeak",
- NULL
-};
-
-static const char *xaaSymbols[] = {
- "XAADestroyInfoRec",
- "XAACreateInfoRec",
- "XAAInit",
- NULL
-};
-
static int s3AccelLinePitches[] = { 640, 800, 1024, 1280, 1600 };
#ifdef XFree86LOADER
@@ -277,12 +212,6 @@ pointer S3Setup (pointer module, pointer opts, int *errmaj, int *errmin)
if (!setupDone) {
setupDone = TRUE;
xf86AddDriver(&S3, module, 0);
- LoaderRefSymLists(vgaHWSymbols,
- vbeSymbols, int10Symbols, ramdacSymbols,
- shadowSymbols,
- fbSymbols,
- xaaSymbols,
- NULL);
return (pointer) 1;
} else {
if (errmaj)
@@ -391,8 +320,6 @@ static Bool S3PreInit(ScrnInfoPtr pScrn, int flags)
if (!xf86LoadSubModule(pScrn, "vgahw"))
return FALSE;
- xf86LoaderReqSymLists(vgaHWSymbols, NULL);
-
if (!vgaHWGetHWRec(pScrn))
return FALSE;
@@ -502,12 +429,10 @@ static Bool S3PreInit(ScrnInfoPtr pScrn, int flags)
}
if (xf86LoadSubModule(pScrn, "int10")) {
- xf86LoaderReqSymLists(int10Symbols, NULL);
pS3->pInt10 = xf86InitInt10(pEnt->index);
}
if (xf86LoadSubModule(pScrn, "vbe")) {
- xf86LoaderReqSymLists(vbeSymbols, NULL);
pS3->pVBE = VBEInit(pS3->pInt10, pEnt->index);
}
@@ -516,7 +441,6 @@ static Bool S3PreInit(ScrnInfoPtr pScrn, int flags)
S3FreeRec(pScrn);
return FALSE;
}
- xf86LoaderReqSymLists(shadowSymbols, NULL);
}
if (!xf86SetGamma(pScrn, gzeros))
@@ -678,7 +602,6 @@ static Bool S3PreInit(ScrnInfoPtr pScrn, int flags)
if (!xf86LoadSubModule(pScrn, "ramdac"))
return FALSE;
- xf86LoaderReqSymLists(ramdacSymbols, NULL);
pScrn->rgbBits = 8; /* set default */
@@ -801,11 +724,9 @@ static Bool S3PreInit(ScrnInfoPtr pScrn, int flags)
xf86SetDpi(pScrn, 0, 0);
xf86LoadSubModule(pScrn, "fb");
- xf86LoaderReqSymLists(fbSymbols, NULL);
if (!xf86LoadSubModule(pScrn, "xaa"))
return FALSE;
- xf86LoaderReqSymLists(xaaSymbols, NULL);
return TRUE;
}
commit 7deebf983f53c505bc25171ab77fdc408f250a6e
Author: Julien Cristau <jcristau@debian.org>
Date: Tue May 26 15:58:19 2009 +0200
xsfbs: don't run dpkg --print-installation-architecture
This is deprecated in new dpkg, and had no users anyway.
diff --git a/debian/xsfbs/xsfbs.sh b/debian/xsfbs/xsfbs.sh
index 8840ff9..197eb74 100644
--- a/debian/xsfbs/xsfbs.sh
+++ b/debian/xsfbs/xsfbs.sh
@@ -57,8 +57,6 @@ EOF
exit $SHELL_LIB_USAGE_ERROR
fi
-ARCHITECTURE="$(dpkg --print-installation-architecture)"
-
if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
RECONFIGURE="true"
else
commit 4178d948cd66a938222d0d7c6353ee8d60229e40
Author: David Nusinow <dnusinow@debian.org>
Date: Mon May 25 20:08:50 2009 -0400
Add README.source
diff --git a/debian/README.source b/debian/README.source
new file mode 100644
index 0000000..34ab4bf
--- /dev/null
+++ b/debian/README.source
@@ -0,0 +1,73 @@
+------------------------------------------------------
+Quick Guide To Patching This Package For The Impatient
+------------------------------------------------------
+
+1. Make sure you have quilt installed
+2. Unpack the package as usual with "dpkg-source -x"
+3. Run the "patch" target in debian/rules
+4. Create a new patch with "quilt new" (see quilt(1))
+5. Edit all the files you want to include in the patch with "quilt edit"
+ (see quilt(1)).
+6. Write the patch with "quilt refresh" (see quilt(1))
+7. Run the "clean" target in debian/rules
+
+Alternatively, instead of using quilt directly, you can drop the patch in to
+debian/patches and add the name of the patch to debian/patches/series.
+
+------------------------------------
+Guide To The X Strike Force Packages
+------------------------------------
+
+The X Strike Force team maintains X packages in git repositories on
+git.debian.org in the pkg-xorg subdirectory. Most upstream packages
+are actually maintained in git repositories as well, so they often
+just need to be pulled into git.debian.org in a "upstream-*" branch.
+Otherwise, the upstream sources are manually installed in the Debian
+git repository.
+
+The .orig.tar.gz upstream source file could be generated this
+"upstream-*" branch in the Debian git repository but it is actually
+copied from upstream tarballs directly.
+
+Due to X.org being highly modular, packaging all X.org applications
+as their own independent packages would have created too many Debian
+packages. For this reason, some X.org applications have been grouped
+into larger packages: xutils, xutils-dev, x11-apps, x11-session-utils,
+x11-utils, x11-xfs-utils, x11-xkb-utils, x11-xserver-utils.
+Most packages, including the X.org server itself and all libraries
+and drivers are, however maintained independently.
+
+The Debian packaging is added by creating the "debian-*" git branch
+which contains the aforementioned "upstream-*" branch plus the debian/
+repository files.
+When a patch has to be applied to the Debian package, two solutions
+are involved:
+* If the patch is available in one of the upstream branches, it
+ may be git'cherry-picked into the Debian repository. In this
+ case, it appears directly in the .diff.gz.
+* Otherwise, the patch is added to debian/patches/ which is managed
+ with quilt as documented in /usr/share/doc/quilt/README.source.
+
+quilt is actually invoked by the Debian X packaging through a larger
+set of scripts called XSFBS. XSFBS brings some other X specific
+features such as managing dependencies and conflicts due to the video
+and input driver ABIs.
+XSFBS itself is maintained in a separate repository at
+ git://git.debian.org/pkg-xorg/xsfbs.git
+and it is pulled inside the other Debian X repositories when needed.
+
+The XSFBS patching system requires a build dependency on quilt. Also
+a dependency on $(STAMP_DIR)/patch has to be added to debian/rules
+so that the XSFBS patching occurs before the actual build. So the
+very first target of the build (likely the one running autoreconf)
+should depend on $(STAMP_DIR)/patch. It should also not depend on
+anything so that parallel builds are correctly supported (nothing
+should probably run while patching is being done). And finally, the
+clean target should depend on the xsfclean target so that patches
+are unapplied on clean.
+
+When the upstream sources contain some DFSG-nonfree files, they are
+listed in text files in debian/prune/ in the "debian-*" branch of
+the Debian repository. XSFBS' scripts then take care of removing
+these listed files during the build so as to generate a modified
+DFSG-free .orig.tar.gz tarball.
commit 061d5f51141323ea2f4e8e597e3d4bd7e3b7cbfa
Author: Evgeny M. Zubok <evgeny.zubok@tochka.ru>
Date: Mon May 25 14:34:27 2009 +0400
Trio64V+ now using NewMMIO. Enable Xv for Trio64V+ and Trio64UV+
diff --git a/ChangeLog b/ChangeLog
index 39aada1..a13d5b4 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,19 @@
+2009-05-25 Evgeny M. Zubok <evgeny.zubok@tochka.ru>
+
+ * src/s3_driver.c:
+ * src/s3_video.c:
+
+ Enable Xv extension for Trio64V+ (thanks to Egor Ivanov for
+ testing on real hardware) and Trio64UV+ (Tested only on Trio64V2 by
+ overriding Chipset with "Trio64UV+" but not on real hardware).
+
+ S3 Trio64V+ now using NewMMIO. Trio64V+ chips have the same ChipId
+ as Trio32/64 but only with chip revision greater or eq 0x40. So if
+ you have problems with NewMMIO, you may override ChipRev in "Device"
+ section of your xorg.conf: "ChipRev" 0x00. Note: disabling the NewMMIO
+ also disables overlay video (Xv) because it isn't implemented for
+ Old MMIO yet.
+
2009-05-04 Evgeny M. Zubok <evgeny.zubok@tochka.ru>
* src/s3_driver.c:
diff --git a/src/s3.h b/src/s3.h
index 1857b0c..49b8a54 100644
--- a/src/s3.h
+++ b/src/s3.h
@@ -258,9 +258,4 @@ void S3RefreshArea32(ScrnInfoPtr pScrn, int num, BoxPtr pbox);
(pS3->Chipset == PCI_CHIP_AURORA64VP) || \
(pS3->Chipset == PCI_CHIP_TRIO64UVP) || \
(pS3->Chipset == PCI_CHIP_TRIO64V2_DXGX))
-
-#define HAS_STREAMS_PROCESSOR() ((pS3->Chipset == PCI_CHIP_AURORA64VP) || \
- (pS3->Chipset == PCI_CHIP_TRIO64UVP) || \
- (pS3->Chipset == PCI_CHIP_TRIO64V2_DXGX))
-
#endif /* _S3_H */
diff --git a/src/s3_driver.c b/src/s3_driver.c
index 88dc25a..7869da7 100644
--- a/src/s3_driver.c
+++ b/src/s3_driver.c
@@ -534,8 +534,8 @@ static Bool S3PreInit(ScrnInfoPtr pScrn, int flags)
pS3->Chipset = pEnt->device->chipID;
pScrn->chipset = (char *)xf86TokenToString(S3Chipsets,
pS3->Chipset);
- xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "ChipID override: 0x%04X\n",
- pS3->Chipset);
+ xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
+ "ChipID override: 0x%04X\n", pS3->Chipset);
} else {
pS3->Chipset = PCI_DEV_DEVICE_ID(pS3->PciInfo);
pScrn->chipset = (char *)xf86TokenToString(S3Chipsets,
@@ -550,7 +550,8 @@ static Bool S3PreInit(ScrnInfoPtr pScrn, int flags)
xfree(pEnt);
- xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Chipset: \"%s\"\n", pScrn->chipset);
+ xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Chipset: \"%s\"\n",
+ pScrn->chipset);
#ifndef XSERVER_LIBPCIACCESS
pS3->PciTag = pciTag(pS3->PciInfo->bus, pS3->PciInfo->device,
@@ -561,6 +562,10 @@ static Bool S3PreInit(ScrnInfoPtr pScrn, int flags)
case PCI_CHIP_964_0:
case PCI_CHIP_964_1:
case PCI_CHIP_TRIO:
+ if (pS3->ChipRev >= 0x40) { /* S3 Trio64V+ has the New MMIO */
+ pS3->S3NewMMIO = TRUE;
+ break;
+ }
case PCI_CHIP_AURORA64VP: /* ??? */
pS3->S3NewMMIO = FALSE;
break;
@@ -571,7 +576,13 @@ static Bool S3PreInit(ScrnInfoPtr pScrn, int flags)
break;
}
- if (HAS_STREAMS_PROCESSOR() && pS3->S3NewMMIO)
+ /* TODO: Streams Processor and Xv for Old MMIO */
+
+ if (((pS3->Chipset == PCI_CHIP_AURORA64VP) ||
+ (pS3->Chipset == PCI_CHIP_TRIO64UVP) ||
+ (pS3->Chipset == PCI_CHIP_TRIO64V2_DXGX) ||
Reply to: