Bug#520718: xserver-xorg: No keyboard after resuming from suspend
Package: xserver-xorg
Version: 1:7.4~5
Severity: normal
After resuming from suspend, my keyboard didn't work. I had to reset the
machine to get it working again.
I'm attaching the full log from the X Server, however the only relevant
line seems to be:
(EE) AT Translated Set 2 keyboard: Device has changed - disabling.
This has only happened once so far, I will add more information if I can
reproduce it regularly.
-- Package-specific info:
Contents of /var/lib/x11/X.roster:
xserver-xorg
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 2008-04-09 22:08 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1872144 2009-01-31 19:20 /usr/bin/Xorg
Contents of /var/lib/x11/xorg.conf.roster:
xserver-xorg
VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
/etc/X11/xorg.conf does not match checksum in /var/lib/x11/xorg.conf.md5sum.
Xorg X server configuration file status:
lrwxrwxrwx 1 root root 24 2009-01-07 13:06 /etc/X11/xorg.conf -> /etc/X11/xorg.conf.intel
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
# http://bugs.debian.org/470763
#Section "InputDevice"
# Identifier "Configured Mouse"
# Driver "mouse"
#EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true" # otherwise it doesn't work
#Option "VertTwoFingerScroll" "1"
#Option "HorizTwoFingerScroll" "1"
#Option "VertEdgeScroll" "0"
Option "VertEdgeScroll" "1"
#Option "HorizEdgeScroll" "0"
#Option "TapButton2" "2"
#Option "TapButton3" "3"
#Option "SHMConfig" "1"
Option "SHMConfig" "1"
EndSection
Section "Device"
Identifier "Configured Video Device"
#Option "EXANoComposite" "true"
#Option "AccelMethod" "XAA" # debian #451791
#Option "XaaNoOffscreenPixmaps" "true" # operation climate control web page background
#option "accelmethod" "uxa"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
SubSection "Display"
Depth 24
Virtual 2960 1050
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
#InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
Section "ServerFlags"
Option "DontZap" "on"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 34488 2009-01-01 16:48 /var/log/Xorg.20.log
-rw-r--r-- 1 root root 20352 2009-02-01 20:15 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 21960 2009-03-22 10:21 /var/log/Xorg.0.log
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (530, 'testing'), (520, 'unstable'), (400, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.29-rc8-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages xserver-xorg depends on:
ii debconf [debconf-2.0] 1.5.26 Debian configuration management sy
ii hal 0.5.11-8sam1 Hardware Abstraction Layer
ii libc6 2.9-4 GNU C Library: Shared libraries
ii x11-xkb-utils 7.4+2 X11 XKB utilities
ii xkb-data 1.5-2 X Keyboard Extension (XKB) configu
ii xserver-xorg-core 2:1.5.99.902-1 Xorg X server - core server
ii xserver-xorg-input-evdev 1:2.1.1-1 X.Org X server -- evdev input driv
ii xserver-xorg-input-synapt 0.99.3-3 Synaptics TouchPad driver for X.Or
ii xserver-xorg-video-intel 2:2.6.1-1 X.Org X server -- Intel i8xx, i9xx
ii xserver-xorg-video-vesa [ 1:2.1.0-1 X.Org X server -- VESA display dri
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 7.3-1 A free implementation of the OpenG
ii udev 0.125-7 /dev/ and hotplug management daemo
xserver-xorg suggests no packages.
-- debconf information:
shared/fontpath/fontserver:
xserver-xorg/config/monitor/use_sync_ranges: true
xserver-xorg/config/doublequote_in_string_error:
xserver-xorg/config/device/default-identifier:
shared/no_known_x-server:
xserver-xorg/config/device/bus_id_error:
* xserver-xorg/config/inputdevice/keyboard/options:
* xserver-xorg/autodetect_keyboard: false
* xserver-xorg/config/device/use_fbdev: false
* xserver-xorg/config/inputdevice/keyboard/variant:
xserver-xorg/config/nonnumeric_string_error:
* xserver-xorg/config/inputdevice/keyboard/layout: gb
* xserver-xorg/config/inputdevice/mouse/emulate3buttons: true
* xserver-xorg/config/inputdevice/keyboard/model: pc105
* xserver-xorg/config/device/driver:
xserver-xorg/config/null_string_error:
shared/multiple_possible_x-servers:
xserver-xorg/config/device/bus_id:
* xserver-xorg/config/inputdevice/keyboard/rules: xorg
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.5.99.902 (1.6.0 RC 2)
Release Date: 2009-1-30
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.28 x86_64 Debian
Current Operating System: Linux durandal 2.6.29-rc8-amd64 #1 SMP Tue Mar 17 01:54:39 UTC 2009 x86_64
Build Date: 31 January 2009 07:16:39PM
xorg-server 2:1.5.99.902-1 (jcristau@debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 20 00:38:16 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Synaptics Touchpad"
(**) Option "DontZap" "on"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Generic Keyboard
(II) Loader magic: 0xce0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0100000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched intel from file name intel.ids
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.99.901, module version = 2.6.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.99.901, module version = 0.99.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF0000000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000246 to 0x80000246
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xf0000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 38707200 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0bb16000 (pgoffset 47894)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0e000000 (pgoffset 57344)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0bb15fff: DRI memory manager (183900 kB)
(II) intel(0): 0x0bb16000-0x0dffffff: exa offscreen (37800 kB)
(II) intel(0): 0x0e000000-0x0fffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x013fefff: depth buffer (12672 kB) Y tiled
(II) intel(0): 0x0179f000-0x023fefff: back buffer (12672 kB) X tiled
(II) intel(0): 0x02800000-0x04aaffff: front buffer (35520 kB) X tiled
(II) intel(0): 0x0279f000-0x0279ffff: overlay registers (4 kB)
(II) intel(0): 0x027a0000-0x027aefff: exa G965 state buffer (60 kB)
(II) intel(0): 0x027b0000-0x027b7fff: logical 3D context (32 kB)
(II) intel(0): 0x027b8000-0x027c1fff: HW cursors (40 kB)
(II) intel(0): 0x0bb16000: end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): [drm] mapped front buffer at 0xd2800000, handle = 0xd2800000
(II) intel(0): [drm] mapped back buffer at 0xd179f000, handle = 0xd179f000
(II) intel(0): [drm] mapped depth buffer at 0xd079f000, handle = 0xd079f000
(II) intel(0): [drm] mapped classic textures at 0xde000000, handle = 0xde000000
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(II) Synaptics touchpad driver version 0.99.3
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event8
(**) Option "Device" "/dev/input/event8"
(II) Synaptics Touchpad: x-axis range 1472 - 5472
(II) Synaptics Touchpad: y-axis range 1408 - 4448
(II) Synaptics Touchpad: pressure range 0 - 255
(II) Synaptics Touchpad: finger width range 0 - 0
(II) Synaptics Touchpad: buttons: left right middle double triple
(**) Option "SHMConfig" "1"
(**) Option "VertEdgeScroll" "1"
(--) Synaptics Touchpad touchpad found
(**) Option "SendCoreEvents" "true"
(**) Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD)
(**) Synaptics Touchpad: (accel) keeping acceleration scheme 1
(**) Synaptics Touchpad: (accel) filter chain progression: 2.00
(**) Synaptics Touchpad: (accel) filter stage 0: 20.00 ms
(**) Synaptics Touchpad: (accel) set acceleration profile 0
(--) Synaptics Touchpad touchpad found
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.99.901, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 0.99.3
(**) Option "Device" "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
exaCopyDirty: Pending damage region empty!
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0bb16000 (pgoffset 47894)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0e000000 (pgoffset 57344)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0bb15fff: DRI memory manager (183900 kB)
(II) intel(0): 0x0bb16000-0x0dffffff: exa offscreen (37800 kB)
(II) intel(0): 0x0e000000-0x0fffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x0084efff: xv buffer (704 kB)
(II) intel(0): 0x0089f000-0x0091dfff: xv buffer (508 kB)
(II) intel(0): 0x0091f000-0x0157efff: depth buffer (12672 kB) Y tiled
(II) intel(0): 0x0191f000-0x0257efff: back buffer (12672 kB) X tiled
(II) intel(0): 0x02a00000-0x04caffff: front buffer (35520 kB) X tiled
(II) intel(0): 0x0291f000-0x0291ffff: overlay registers (4 kB)
(II) intel(0): 0x02920000-0x0292efff: exa G965 state buffer (60 kB)
(II) intel(0): 0x02930000-0x02937fff: logical 3D context (32 kB)
(II) intel(0): 0x02938000-0x02941fff: HW cursors (40 kB)
(II) intel(0): 0x0bb16000: end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): [drm] mapped front buffer at 0xd2a00000, handle = 0xd2a00000
(II) intel(0): [drm] mapped back buffer at 0xd191f000, handle = 0xd191f000
(II) intel(0): [drm] mapped depth buffer at 0xd091f000, handle = 0xd091f000
(--) Synaptics Touchpad touchpad found
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 65.31 1280 1296 1328 1344 800 801 804 810 -hsync -vsync (48.6 kHz)
(II) intel(0): EDID vendor "SEC", prod id 16705
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0bb16000 (pgoffset 47894)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0e000000 (pgoffset 57344)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0bb15fff: DRI memory manager (183900 kB)
(II) intel(0): 0x0bb16000-0x0dffffff: exa offscreen (37800 kB)
(II) intel(0): 0x0e000000-0x0fffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x0084efff: xv buffer (704 kB)
(II) intel(0): 0x0089f000-0x0091dfff: xv buffer (508 kB)
(II) intel(0): 0x0091f000-0x0157efff: depth buffer (12672 kB) Y tiled
(II) intel(0): 0x0191f000-0x0257efff: back buffer (12672 kB) X tiled
(II) intel(0): 0x02a00000-0x04caffff: front buffer (35520 kB) X tiled
(II) intel(0): 0x0291f000-0x0291ffff: overlay registers (4 kB)
(II) intel(0): 0x02920000-0x0292efff: exa G965 state buffer (60 kB)
(II) intel(0): 0x02930000-0x02937fff: logical 3D context (32 kB)
(II) intel(0): 0x02938000-0x02941fff: HW cursors (40 kB)
(II) intel(0): 0x0bb16000: end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(--) Synaptics Touchpad touchpad found
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0bb16000 (pgoffset 47894)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0e000000 (pgoffset 57344)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0bb15fff: DRI memory manager (183900 kB)
(II) intel(0): 0x0bb16000-0x0dffffff: exa offscreen (37800 kB)
(II) intel(0): 0x0e000000-0x0fffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x0084efff: xv buffer (704 kB)
(II) intel(0): 0x0089f000-0x0091dfff: xv buffer (508 kB)
(II) intel(0): 0x0091f000-0x0157efff: depth buffer (12672 kB) Y tiled
(II) intel(0): 0x0191f000-0x0257efff: back buffer (12672 kB) X tiled
(II) intel(0): 0x02a00000-0x04caffff: front buffer (35520 kB) X tiled
(II) intel(0): 0x0291f000-0x0291ffff: overlay registers (4 kB)
(II) intel(0): 0x02920000-0x0292efff: exa G965 state buffer (60 kB)
(II) intel(0): 0x02930000-0x02937fff: logical 3D context (32 kB)
(II) intel(0): 0x02938000-0x02941fff: HW cursors (40 kB)
(II) intel(0): 0x0bb16000: end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(--) Synaptics Touchpad touchpad found
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0bb16000 (pgoffset 47894)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0e000000 (pgoffset 57344)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0bb15fff: DRI memory manager (183900 kB)
(II) intel(0): 0x0bb16000-0x0dffffff: exa offscreen (37800 kB)
(II) intel(0): 0x0e000000-0x0fffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x0084efff: xv buffer (704 kB)
(II) intel(0): 0x0089f000-0x0091dfff: xv buffer (508 kB)
(II) intel(0): 0x0091f000-0x0157efff: depth buffer (12672 kB) Y tiled
(II) intel(0): 0x0191f000-0x0257efff: back buffer (12672 kB) X tiled
(II) intel(0): 0x02a00000-0x04caffff: front buffer (35520 kB) X tiled
(II) intel(0): 0x0291f000-0x0291ffff: overlay registers (4 kB)
(II) intel(0): 0x02920000-0x0292efff: exa G965 state buffer (60 kB)
(II) intel(0): 0x02930000-0x02937fff: logical 3D context (32 kB)
(II) intel(0): 0x02938000-0x02941fff: HW cursors (40 kB)
(II) intel(0): 0x0bb16000: end of memory manager
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(--) Synaptics Touchpad touchpad found
(WW) SynPS/2 Synaptics TouchPad can't grab event device, errno=16
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(EE) AT Translated Set 2 keyboard: Device has changed - disabling.
(II) UnloadModule: "synaptics"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0x2effe000 at 0x7fd535c1d000
(II) intel(0): [drm] Closed DRM master.
Reply to: