Bug#551635: xserver-xorg-video-intel: [G45] KMS conflicts with xrandr when changing monitor
I tried again with this stuff. I recently updated to the latest sid
packages. Xrandr is not working at all with KMS: no errors, no messages,
just does nothing.
On lun 19 ott 2009, Brice Goglin wrote:
> More details please. What monitors do you have plugged where?
I have TV (1360x768@60Hz) on vga, and main LCD monitor on DVI
(1280x1024@75Hz)
> What
> xrandr command-line did you use?
I use an own made script, associated to global shortcut of kde:
if (test -f /dev/shm/TV_ON ) then
xrandr --output HDMI-1 --mode 1280x1024 --rate 75.0
sleep 5
xrandr --output VGA --off
rm -f /dev/shm/TV_ON
else
xrandr --output VGA --mode 1360x768 --rate 60.0
sleep 5
xrandr --output HDMI-1 --off
touch /dev/shm/TV_ON
fi
> Does it break when switching from DVI
> to VGA,
> VGA to DVI
> or both?
the script above do not have any effect, just like an empty line.
> What appears in the Xorg log and dmesg when you do do?
dmesg:
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
> Brice
>
Rob
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31-4.slh.1-sidux-amd64 (Debian 2.6.31-16) (s.l-h@gmx.de) (gcc version 4.3.4 (Debian 4.3.4-5) ) #1 SMP PREEMPT Tue Oct 13 01:58:23 UTC 2009
Command line: root=/dev/md0 ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000077d80000 (usable)
BIOS-e820: 0000000077d80000 - 0000000077d8e000 (ACPI data)
BIOS-e820: 0000000077d8e000 - 0000000077dd0000 (ACPI NVS)
BIOS-e820: 0000000077dd0000 - 0000000077e00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x77d80 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 077E00000 mask FFFE00000 uncachable
2 base 078000000 mask FF8000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-0000000077d80000
0000000000 - 0077c00000 page 2M
0077c00000 - 0077d80000 page 4k
kernel direct mapping tables up to 77d80000 @ 10000-14000
RAMDISK: 373a3000 - 37fefbe5
ACPI: RSDP 00000000000fba20 00024 (v02 ACPIAM)
ACPI: XSDT 0000000077d80100 00064 (v01 A_M_I_ OEMXSDT 07000825 MSFT 00000097)
ACPI: FACP 0000000077d80290 000F4 (v03 A_M_I_ OEMFACP 07000825 MSFT 00000097)
ACPI: DSDT 0000000077d80440 090CE (v01 A0982 A0982043 00000043 INTL 20060113)
ACPI: FACS 0000000077d8e000 00040
ACPI: APIC 0000000077d80390 0006C (v01 A_M_I_ OEMAPIC 07000825 MSFT 00000097)
ACPI: MCFG 0000000077d80400 0003C (v01 A_M_I_ OEMMCFG 07000825 MSFT 00000097)
ACPI: OEMB 0000000077d8e040 00089 (v01 A_M_I_ AMI_OEM 07000825 MSFT 00000097)
ACPI: HPET 0000000077d89510 00038 (v01 A_M_I_ OEMHPET 07000825 MSFT 00000097)
ACPI: GSCI 0000000077d8e0d0 02024 (v01 A_M_I_ GMCHSCI 07000825 MSFT 00000097)
ACPI: OSFR 0000000077d89550 000B0 (v01 A_M_I_ OEMOSFR 07000825 MSFT 00000097)
ACPI: SSDT 0000000077d90b50 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000077d80000
Bootmem setup node 0 0000000000000000-0000000077d80000
NODE_DATA [0000000000012000 - 0000000000016fff]
bootmap [0000000000017000 - 0000000000025faf] pages f
(7 early reservations) ==> bootmem [0000000000 - 0077d80000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001624df0] TEXT DATA BSS ==> [0001000000 - 0001624df0]
#3 [00373a3000 - 0037fefbe5] RAMDISK ==> [00373a3000 - 0037fefbe5]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0001625000 - 0001625288] BRK ==> [0001625000 - 0001625288]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
found SMP MP-table at [ffff8800000ff780] ff780
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x00077d80
On node 0 totalpages: 490767
DMA zone: 56 pages used for memmap
DMA zone: 101 pages reserved
DMA zone: 3826 pages, LIFO batch:0
DMA32 zone: 6656 pages used for memmap
DMA32 zone: 480128 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 77e00000 (gap: 77e00000:87000000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages at ffff880001636000, static data 83012 bytes
Built 1 zonelists in Node order, mobility grouping on. Total pages: 483954
Policy zone: DMA32
Kernel command line: root=/dev/md0 ro
PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1914900k/1963520k available (3348k kernel code, 452k absent, 48168k reserved, 1580k data, 636k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible RCU implementation.
NR_IRQS:4352 nr_irqs:440
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 3005.107 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 6010.21 BogoMIPS (lpj=3005107)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090521
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a
APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
APIC delta adjusted to PM-Timer: 2087187 (2504603)
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6010.89 BogoMIPS (lpj=3005445)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (12021.10 BogoMIPS).
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Warning: Incorrect checksum in table [OEMB] - 3D, should be 3C 20090521 tbutils-246
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port: [0xdc00-0xdc07]
pci 0000:00:02.1: reg 10 64bit mmio: [0xfe900000-0xfe9fffff]
pci 0000:00:1a.0: reg 20 io port: [0xd480-0xd49f]
pci 0000:00:1a.1: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:1a.2: reg 20 io port: [0xd880-0xd89f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe8fbc00-0xfe8fbfff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe8f4000-0xfe8f7fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xd000-0xd01f]
pci 0000:00:1d.1: reg 20 io port: [0xd080-0xd09f]
pci 0000:00:1d.2: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe8fb800-0xfe8fbbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: reg 10 io port: [0xbc00-0xbc07]
pci 0000:00:1f.2: reg 14 io port: [0xb880-0xb883]
pci 0000:00:1f.2: reg 18 io port: [0xb800-0xb807]
pci 0000:00:1f.2: reg 1c io port: [0xb480-0xb483]
pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb40f]
pci 0000:00:1f.2: reg 24 io port: [0xb080-0xb08f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe8fb400-0xfe8fb4ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:00:1f.5: reg 10 io port: [0xcc00-0xcc07]
pci 0000:00:1f.5: reg 14 io port: [0xc880-0xc883]
pci 0000:00:1f.5: reg 18 io port: [0xc800-0xc807]
pci 0000:00:1f.5: reg 1c io port: [0xc480-0xc483]
pci 0000:00:1f.5: reg 20 io port: [0xc400-0xc40f]
pci 0000:00:1f.5: reg 24 io port: [0xc080-0xc08f]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
pci 0000:01:00.0: reg 10 io port: [0xe800-0xe8ff]
pci 0000:01:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff]
pci 0000:01:00.0: reg 20 64bit mmio: [0xfdef0000-0xfdefffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff]
pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
pci 0000:03:03.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff]
pci 0000:03:03.0: supports D1 D2
pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:06: ioport range 0x290-0x29f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x500-0x57f could not be reserved
system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved
system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0xc0000-0xcffff has been reserved
system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
system 00:0f: iomem range 0x100000-0x77dfffff could not be reserved
system 00:0f: iomem range 0xe0000000-0xffffffff could not be reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.5: IO window: 0xe000-0xefff
pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:1c.5: PREFETCH window: 0x000000fde00000-0x000000fdefffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:1e.0: PREFETCH window: disabled
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff]
pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 pref mem [0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 3 io: [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 12594k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1256371335.366:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3764
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:1c.5: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Fixed MDIO Bus: probed
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 636k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
SCSI subsystem initialized
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:01:00.0: setting latency timer to 64
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
r8169 0000:01:00.0: irq 26 for MSI/MSI-X
eth0: RTL8168c/8111c at 0xffffc90000322000, 00:22:15:8a:7f:56, XID 3c4000c0 IRQ 26
libata version 3.00 loaded.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
udev: renamed network interface eth0 to eth3
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
firewire_ohci 0000:03:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
uhci_hcd: USB Universal Host Controller Interface driver
ata1: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8fbc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
agpgart-intel 0000:00:00.0: detected 131068K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d480
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8fb800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.7
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
firewire_ohci: Added fw-ohci device 0000:03:03.0, OHCI version 1.0
ata4: SATA link down (SStatus 0 SControl 300)
usb 3-3: new high speed USB device using ehci_hcd and address 2
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD2502ABYS-01B7A0, 02.03B02, max UDMA/133
ata3.00: 490350672 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
usb 3-3: New USB device found, idVendor=152e, idProduct=2507
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: Super Multi DVD Rewriter
usb 3-3: Manufacturer: HLDS Inc.
usb 3-3: SerialNumber: P02051227154408
usb 3-3: configuration #1 chosen from 1 choice
firewire_core: created device fw0: GUID 001e8c00016fc7e6, S400
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: ATA-8: WDC WD2502ABYS-01B7A0, 02.03B02, max UDMA/133
ata1.01: 490350672 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: configured for UDMA/133
scsi 0:0:1:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5
sd 0:0:1:0: [sda] 490350672 512-byte logical blocks: (251 GB/233 GiB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
scsi 2:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 490350672 512-byte logical blocks: (251 GB/233 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sda1 sda2 sda3 sda4
sdb1 sdb2 sdb3 sdb4
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 0:0:1:0: [sda] Attached SCSI disk
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: New USB device found, idVendor=05fe, idProduct=0011
usb 5-1: New USB device strings: Mfr=2, Product=2, SerialNumber=0
usb 5-1: Product: Wireless Mouse
usb 5-1: Manufacturer: Wireless Mouse
usb 5-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Wireless Mouse Wireless Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:05FE:0011.0001: input,hidraw0: USB HID v1.10 Mouse [Wireless Mouse Wireless Mouse] on usb-0000:00:1a.2-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 15002763264
md0: unknown partition table
md: md1 stopped.
md: bind<sdb2>
md: bind<sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 83996442624
md1: unknown partition table
md: md2 stopped.
usb 7-2: new full speed USB device using uhci_hcd and address 2
md: bind<sdb3>
md: bind<sda3>
raid0: looking at sda3
raid0: comparing sda3(292961024)
with sda3(292961024)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb3
raid0: comparing sdb3(292961024)
with sda3(292961024)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 585922048 sectors.
******* md2 configuration *********
zone0=[sda3/sdb3/]
zone offset=0kb device offset=0kb size=292961024kb
**********************************
md2: detected capacity change from 0 to 299992088576
md2: unknown partition table
usb 7-2: New USB device found, idVendor=093a, idProduct=2468
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: CIF Single Chip
usb 7-2: Manufacturer: Pixart Imaging Inc.
usb 7-2: configuration #1 chosen from 1 choice
PM: Starting manual resume from disk
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
usb 8-1: new full speed USB device using uhci_hcd and address 2
usb 8-1: New USB device found, idVendor=0a12, idProduct=0001
usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 8-1: configuration #1 chosen from 1 choice
udev: starting version 146
ACPI: SSDT 0000000077d90100 00277 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: SSDT 0000000077d90600 004B2 (v01 PmRef P001Cst 00003001 INTL 20060113)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device0
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
ACPI: SSDT 0000000077d90380 00277 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
ACPI: SSDT 0000000077d90ac0 00085 (v01 PmRef P002Cst 00003000 INTL 20060113)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:01: registered as cooling_device1
input: PC Speaker as /devices/platform/pcspkr/input/input5
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i801_smbus: probe of 0000:00:1f.3 failed with error -16
Linux video capture interface: v2.00
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
gspca: main v2.6.0 registered
gspca: probing 093a:2468
pac207: Pixart Sensor ID 0x27 Chips ID 0x08
pac207: Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x093A:0x2468)
gspca: probe ok
usbcore: registered new interface driver pac207
pac207: registered
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
EXT3 FS on md0, internal journal
loop: module loaded
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
sd 0:0:1:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-2164D 1.01 PQ: 0 ANSI: 0
scsi 4:0:0:0: Attached scsi generic sg2 type 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
kjournald starting. Commit interval 5 seconds
EXT3 FS on md1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem md2
Ending clean XFS mount for filesystem: md2
r8169: eth3: link up
r8169: eth3: link up
Clocksource tsc unstable (delta = -240816592 ns)
NET: Registered protocol family 17
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
fuse init (API version 7.12)
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa054b840
vboxdrv: fAsync=0 offMin=0x288 offMax=0x115e
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.0.8 (interface 0x000e0000).
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa06ea1c0
VBoxNetAdp: dbg - g_abExecMemory=ffffffffa07059a0
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
eth3: no IPv6 routers present
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
i915 0000:00:02.0: irq 27 for MSI/MSI-X
[drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B
[drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
Console: switching to colour frame buffer device 160x48
[drm] fb0: inteldrmfb frame buffer device
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[drm] TMDS-8: set mode 1280x1024 2c
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
[drm] DAC-6: set mode 1360x768 2f
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.31-4.slh.1-sidux-amd64 (Debian 2.6.31-16) (s.l-h@gmx.de) (gcc version 4.3.4 (Debian 4.3.4-5) ) #1 SMP PREEMPT Tue Oct 13 01:58:23 UTC 2009
Command line: root=/dev/md0 ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000077d80000 (usable)
BIOS-e820: 0000000077d80000 - 0000000077d8e000 (ACPI data)
BIOS-e820: 0000000077d8e000 - 0000000077dd0000 (ACPI NVS)
BIOS-e820: 0000000077dd0000 - 0000000077e00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x77d80 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 077E00000 mask FFFE00000 uncachable
2 base 078000000 mask FF8000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-0000000077d80000
0000000000 - 0077c00000 page 2M
0077c00000 - 0077d80000 page 4k
kernel direct mapping tables up to 77d80000 @ 10000-14000
RAMDISK: 373a3000 - 37fefbe5
ACPI: RSDP 00000000000fba20 00024 (v02 ACPIAM)
ACPI: XSDT 0000000077d80100 00064 (v01 A_M_I_ OEMXSDT 07000825 MSFT 00000097)
ACPI: FACP 0000000077d80290 000F4 (v03 A_M_I_ OEMFACP 07000825 MSFT 00000097)
ACPI: DSDT 0000000077d80440 090CE (v01 A0982 A0982043 00000043 INTL 20060113)
ACPI: FACS 0000000077d8e000 00040
ACPI: APIC 0000000077d80390 0006C (v01 A_M_I_ OEMAPIC 07000825 MSFT 00000097)
ACPI: MCFG 0000000077d80400 0003C (v01 A_M_I_ OEMMCFG 07000825 MSFT 00000097)
ACPI: OEMB 0000000077d8e040 00089 (v01 A_M_I_ AMI_OEM 07000825 MSFT 00000097)
ACPI: HPET 0000000077d89510 00038 (v01 A_M_I_ OEMHPET 07000825 MSFT 00000097)
ACPI: GSCI 0000000077d8e0d0 02024 (v01 A_M_I_ GMCHSCI 07000825 MSFT 00000097)
ACPI: OSFR 0000000077d89550 000B0 (v01 A_M_I_ OEMOSFR 07000825 MSFT 00000097)
ACPI: SSDT 0000000077d90b50 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000077d80000
Bootmem setup node 0 0000000000000000-0000000077d80000
NODE_DATA [0000000000012000 - 0000000000016fff]
bootmap [0000000000017000 - 0000000000025faf] pages f
(7 early reservations) ==> bootmem [0000000000 - 0077d80000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0001624df0] TEXT DATA BSS ==> [0001000000 - 0001624df0]
#3 [00373a3000 - 0037fefbe5] RAMDISK ==> [00373a3000 - 0037fefbe5]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0001625000 - 0001625288] BRK ==> [0001625000 - 0001625288]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
found SMP MP-table at [ffff8800000ff780] ff780
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x00077d80
On node 0 totalpages: 490767
DMA zone: 56 pages used for memmap
DMA zone: 101 pages reserved
DMA zone: 3826 pages, LIFO batch:0
DMA32 zone: 6656 pages used for memmap
DMA32 zone: 480128 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 77e00000 (gap: 77e00000:87000000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages at ffff880001636000, static data 83012 bytes
Built 1 zonelists in Node order, mobility grouping on. Total pages: 483954
Policy zone: DMA32
Kernel command line: root=/dev/md0 ro
PID hash table entries: 4096 (order: 12, 32768 bytes)
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1914900k/1963520k available (3348k kernel code, 452k absent, 48168k reserved, 1580k data, 636k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Preemptible RCU implementation.
NR_IRQS:4352 nr_irqs:440
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 3005.107 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 6010.21 BogoMIPS (lpj=3005107)
Security Framework initialized
SELinux: Disabled at boot.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 0/0x0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20090521
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a
APIC calibration not consistent with PM-Timer: 119ms instead of 100ms
APIC delta adjusted to PM-Timer: 2087187 (2504603)
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6010.89 BogoMIPS (lpj=3005445)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 1/0x1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
mce: CPU supports 6 MCE banks
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (12021.10 BogoMIPS).
Booting paravirtualized kernel on bare hardware
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI Warning: Incorrect checksum in table [OEMB] - 3D, should be 3C 20090521 tbutils-246
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 20 io port: [0xdc00-0xdc07]
pci 0000:00:02.1: reg 10 64bit mmio: [0xfe900000-0xfe9fffff]
pci 0000:00:1a.0: reg 20 io port: [0xd480-0xd49f]
pci 0000:00:1a.1: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:1a.2: reg 20 io port: [0xd880-0xd89f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe8fbc00-0xfe8fbfff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe8f4000-0xfe8f7fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xd000-0xd01f]
pci 0000:00:1d.1: reg 20 io port: [0xd080-0xd09f]
pci 0000:00:1d.2: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe8fb800-0xfe8fbbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: reg 10 io port: [0xbc00-0xbc07]
pci 0000:00:1f.2: reg 14 io port: [0xb880-0xb883]
pci 0000:00:1f.2: reg 18 io port: [0xb800-0xb807]
pci 0000:00:1f.2: reg 1c io port: [0xb480-0xb483]
pci 0000:00:1f.2: reg 20 io port: [0xb400-0xb40f]
pci 0000:00:1f.2: reg 24 io port: [0xb080-0xb08f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe8fb400-0xfe8fb4ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:00:1f.5: reg 10 io port: [0xcc00-0xcc07]
pci 0000:00:1f.5: reg 14 io port: [0xc880-0xc883]
pci 0000:00:1f.5: reg 18 io port: [0xc800-0xc807]
pci 0000:00:1f.5: reg 1c io port: [0xc480-0xc483]
pci 0000:00:1f.5: reg 20 io port: [0xc400-0xc40f]
pci 0000:00:1f.5: reg 24 io port: [0xc080-0xc08f]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
pci 0000:01:00.0: reg 10 io port: [0xe800-0xe8ff]
pci 0000:01:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff]
pci 0000:01:00.0: reg 20 64bit mmio: [0xfdef0000-0xfdefffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff]
pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfde00000-0xfdefffff]
pci 0000:03:03.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff]
pci 0000:03:03.0: supports D1 D2
pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:03:03.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:06: ioport range 0x290-0x29f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x500-0x57f could not be reserved
system 00:07: iomem range 0xfed08000-0xfed08fff has been reserved
system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
system 00:0a: iomem range 0xffc00000-0xffefffff has been reserved
system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0xc0000-0xcffff has been reserved
system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
system 00:0f: iomem range 0x100000-0x77dfffff could not be reserved
system 00:0f: iomem range 0xe0000000-0xffffffff could not be reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.5: IO window: 0xe000-0xefff
pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:1c.5: PREFETCH window: 0x000000fde00000-0x000000fdefffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
pci 0000:00:1e.0: PREFETCH window: disabled
alloc irq_desc for 17 on node 0
alloc kstat_irqs on node 0
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff]
pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 pref mem [0xfde00000-0xfdefffff]
pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 3 io: [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 12594k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1256371335.366:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3764
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
alloc irq_desc for 24 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 25 on node 0
alloc kstat_irqs on node 0
pcieport-driver 0000:00:1c.5: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Fixed MDIO Bus: probed
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 636k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
SCSI subsystem initialized
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:01:00.0: setting latency timer to 64
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
r8169 0000:01:00.0: irq 26 for MSI/MSI-X
eth0: RTL8168c/8111c at 0xffffc90000322000, 00:22:15:8a:7f:56, XID 3c4000c0 IRQ 26
libata version 3.00 loaded.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
udev: renamed network interface eth0 to eth3
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
firewire_ohci 0000:03:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
uhci_hcd: USB Universal Host Controller Interface driver
ata1: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe8fbc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset
agpgart-intel 0000:00:00.0: detected 131068K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d480
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19
ata4: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19
alloc irq_desc for 23 on node 0
alloc kstat_irqs on node 0
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe8fb800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 ehci_hcd
usb usb3: SerialNumber: 0000:00:1d.7
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
alloc irq_desc for 21 on node 0
alloc kstat_irqs on node 0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000d880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d080
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.31-4.slh.1-sidux-amd64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
firewire_ohci: Added fw-ohci device 0000:03:03.0, OHCI version 1.0
ata4: SATA link down (SStatus 0 SControl 300)
usb 3-3: new high speed USB device using ehci_hcd and address 2
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD2502ABYS-01B7A0, 02.03B02, max UDMA/133
ata3.00: 490350672 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
usb 3-3: New USB device found, idVendor=152e, idProduct=2507
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: Super Multi DVD Rewriter
usb 3-3: Manufacturer: HLDS Inc.
usb 3-3: SerialNumber: P02051227154408
usb 3-3: configuration #1 chosen from 1 choice
firewire_core: created device fw0: GUID 001e8c00016fc7e6, S400
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: ATA-8: WDC WD2502ABYS-01B7A0, 02.03B02, max UDMA/133
ata1.01: 490350672 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.01: configured for UDMA/133
scsi 0:0:1:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5
sd 0:0:1:0: [sda] 490350672 512-byte logical blocks: (251 GB/233 GiB)
sd 0:0:1:0: [sda] Write Protect is off
sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
scsi 2:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 490350672 512-byte logical blocks: (251 GB/233 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sda1 sda2 sda3 sda4
sdb1 sdb2 sdb3 sdb4
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 0:0:1:0: [sda] Attached SCSI disk
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: New USB device found, idVendor=05fe, idProduct=0011
usb 5-1: New USB device strings: Mfr=2, Product=2, SerialNumber=0
usb 5-1: Product: Wireless Mouse
usb 5-1: Manufacturer: Wireless Mouse
usb 5-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Wireless Mouse Wireless Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input2
generic-usb 0003:05FE:0011.0001: input,hidraw0: USB HID v1.10 Mouse [Wireless Mouse Wireless Mouse] on usb-0000:00:1a.2-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 15002763264
md0: unknown partition table
md: md1 stopped.
md: bind<sdb2>
md: bind<sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 83996442624
md1: unknown partition table
md: md2 stopped.
usb 7-2: new full speed USB device using uhci_hcd and address 2
md: bind<sdb3>
md: bind<sda3>
raid0: looking at sda3
raid0: comparing sda3(292961024)
with sda3(292961024)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb3
raid0: comparing sdb3(292961024)
with sda3(292961024)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 585922048 sectors.
******* md2 configuration *********
zone0=[sda3/sdb3/]
zone offset=0kb device offset=0kb size=292961024kb
**********************************
md2: detected capacity change from 0 to 299992088576
md2: unknown partition table
usb 7-2: New USB device found, idVendor=093a, idProduct=2468
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: CIF Single Chip
usb 7-2: Manufacturer: Pixart Imaging Inc.
usb 7-2: configuration #1 chosen from 1 choice
PM: Starting manual resume from disk
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
usb 8-1: new full speed USB device using uhci_hcd and address 2
usb 8-1: New USB device found, idVendor=0a12, idProduct=0001
usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 8-1: configuration #1 chosen from 1 choice
udev: starting version 146
ACPI: SSDT 0000000077d90100 00277 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
ACPI: SSDT 0000000077d90600 004B2 (v01 PmRef P001Cst 00003001 INTL 20060113)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:00: registered as cooling_device0
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
ACPI: SSDT 0000000077d90380 00277 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
ACPI: SSDT 0000000077d90ac0 00085 (v01 PmRef P002Cst 00003000 INTL 20060113)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor LNXCPU:01: registered as cooling_device1
input: PC Speaker as /devices/platform/pcspkr/input/input5
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
i801_smbus: probe of 0000:00:1f.3 failed with error -16
Linux video capture interface: v2.00
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
gspca: main v2.6.0 registered
gspca: probing 093a:2468
pac207: Pixart Sensor ID 0x27 Chips ID 0x08
pac207: Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x093A:0x2468)
gspca: probe ok
usbcore: registered new interface driver pac207
pac207: registered
alloc irq_desc for 22 on node 0
alloc kstat_irqs on node 0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
EXT3 FS on md0, internal journal
loop: module loaded
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.1: Using relative temperature scale!
sd 0:0:1:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-2164D 1.01 PQ: 0 ANSI: 0
scsi 4:0:0:0: Attached scsi generic sg2 type 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
kjournald starting. Commit interval 5 seconds
EXT3 FS on md1, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem md2
Ending clean XFS mount for filesystem: md2
r8169: eth3: link up
r8169: eth3: link up
Clocksource tsc unstable (delta = -240816592 ns)
NET: Registered protocol family 17
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
fuse init (API version 7.12)
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa054b840
vboxdrv: fAsync=0 offMin=0x288 offMax=0x115e
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.0.8 (interface 0x000e0000).
VBoxNetFlt: dbg - g_abExecMemory=ffffffffa06ea1c0
VBoxNetAdp: dbg - g_abExecMemory=ffffffffa07059a0
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
eth3: no IPv6 routers present
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 27 on node 0
alloc kstat_irqs on node 0
i915 0000:00:02.0: irq 27 for MSI/MSI-X
[drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B
[drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
Console: switching to colour frame buffer device 160x48
[drm] fb0: inteldrmfb frame buffer device
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[drm] TMDS-8: set mode 1280x1024 2c
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
[drm] DAC-6: set mode 1360x768 2f
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
i915 0000:00:02.0: DVI-D-2: no EDID data
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-2-amd64 x86_64 Debian
Current Operating System: Linux achille 2.6.31-4.slh.1-sidux-amd64 #1 SMP PREEMPT Tue Oct 13 01:58:23 UTC 2009 x86_64
Build Date: 13 October 2009 09:39:10AM
xorg-server 2:1.6.5-1 (jcristau@debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 24 10:05:42 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Deafult Server"
(**) |-->Screen "Screen[0]" (0)
(**) | |-->Monitor "Monitor[0]"
(**) | |-->Device "Device[0]"
(**) Option "DontZap" "false"
(**) Option "AllowMouseOpenFail" "false"
(**) Option "AllowEmptyInput" "false"
(**) Option "AutoAddDevices" "false"
(**) Not automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
(==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
(II) Loader magic: 0x3b40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2e22:1043:8276 Intel Corporation 4 Series Chipset Integrated Graphics Controller rev 3, Mem @ 0xfe400000/4194304, 0xd0000000/268435456, I/O @ 0x0000dc00/8
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 2.9.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "ModeDebug" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) G45/G43
(--) intel(0): Chipset: "G45/G43"
(II) intel(0): Output VGA1 using monitor section Monitor[0]
(II) intel(0): Output DVI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output DVI2 has no monitor section
(II) intel(0): Output DP2 has no monitor section
(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: SAM Model: 1ff Serial#: 0
(II) intel(0): Year: 2006 Week: 41
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 89 vert.: 50
(II) intel(0): Gamma: 2.40
(II) intel(0): DPMS capabilities: Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.632 redY: 0.357 greenX: 0.289 greenY: 0.596
(II) intel(0): blueX: 0.143 blueY: 0.085 whiteX: 0.280 whiteY: 0.290
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 85.5 MHz Image Size: 885 x 498 mm
(II) intel(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
(II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 65.0 MHz Image Size: 885 x 498 mm
(II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) intel(0): Ranges: V min: 60 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 90 MHz
(II) intel(0): Monitor name: SAMSUNG
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004c2dff0100000000
(II) intel(0): 291001036859328c2ae2bda15b4a9824
(II) intel(0): 15474aadce0001010101010101010101
(II) intel(0): 010101010101662150b051001b304070
(II) intel(0): 360075f23100001e6419004041002630
(II) intel(0): 1888360075f231000018000000fd003c
(II) intel(0): 4b1e3d09000a202020202020000000fc
(II) intel(0): 0053414d53554e470a202020202000c6
(II) intel(0): EDID vendor "SAM", prod id 511
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): EDID for output DVI1
(II) intel(0): Manufacturer: ACI Model: 19b4 Serial#: 49237
(II) intel(0): Year: 2007 Week: 41
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.340 greenX: 0.290 greenY: 0.610
(II) intel(0): blueX: 0.150 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1280 vsize 720 refresh: 75 vid: 53121
(II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) intel(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 108.0 MHz Image Size: 340 x 270 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 7ALMTF049237
(II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 150 MHz
(II) intel(0): Monitor name: ASUS VB191
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff000469b41955c00000
(II) intel(0): 2911010380261e78ea8585a6574a9c26
(II) intel(0): 125054bfee8081cf818f714f81800101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300540e1100001e000000ff0037414c
(II) intel(0): 4d54463034393233370a000000fd0037
(II) intel(0): 4b1e530f000a202020202020000000fc
(II) intel(0): 00415355532056423139310a202000b8
(II) intel(0): Printing probed modes for output DVI1
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): EDID for output DP1
(II) intel(0): EDID for output DVI2
(II) intel(0): EDID for output DP2
(II) intel(0): Output VGA1 connected
(II) intel(0): Output DVI1 connected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output DVI2 disconnected
(II) intel(0): Output DP2 disconnected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA1 using initial mode 1360x768
(II) intel(0): Output DVI1 using initial mode 1280x1024
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(++) intel(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms" "true"
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "Monitor-HDMI-1" is not used
(WW) intel(0): Option "Monitor-VGA" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 345 x 260
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(**) <default pointer>: (accel) keeping acceleration scheme 1
(**) <default pointer>: (accel) filter chain progression: 2.00
(**) <default pointer>: (accel) filter stage 0: 20.00 ms
(**) <default pointer>: (accel) set acceleration profile 0
(II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) <default keyboard>: always reports core events
(**) Option "Protocol" "standard"
(**) <default keyboard>: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) <default keyboard>: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) <default keyboard>: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) <default keyboard>: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Power Button
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Power Button
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Wireless Mouse Wireless Mouse
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: SAM Model: 1ff Serial#: 0
(II) intel(0): Year: 2006 Week: 41
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 89 vert.: 50
(II) intel(0): Gamma: 2.40
(II) intel(0): DPMS capabilities: Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.632 redY: 0.357 greenX: 0.289 greenY: 0.596
(II) intel(0): blueX: 0.143 blueY: 0.085 whiteX: 0.280 whiteY: 0.290
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 85.5 MHz Image Size: 885 x 498 mm
(II) intel(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
(II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 65.0 MHz Image Size: 885 x 498 mm
(II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) intel(0): Ranges: V min: 60 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 90 MHz
(II) intel(0): Monitor name: SAMSUNG
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004c2dff0100000000
(II) intel(0): 291001036859328c2ae2bda15b4a9824
(II) intel(0): 15474aadce0001010101010101010101
(II) intel(0): 010101010101662150b051001b304070
(II) intel(0): 360075f23100001e6419004041002630
(II) intel(0): 1888360075f231000018000000fd003c
(II) intel(0): 4b1e3d09000a202020202020000000fc
(II) intel(0): 0053414d53554e470a202020202000c6
(II) intel(0): EDID vendor "SAM", prod id 511
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): EDID for output DVI1
(II) intel(0): Manufacturer: ACI Model: 19b4 Serial#: 49237
(II) intel(0): Year: 2007 Week: 41
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.340 greenX: 0.290 greenY: 0.610
(II) intel(0): blueX: 0.150 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1280 vsize 720 refresh: 75 vid: 53121
(II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) intel(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 108.0 MHz Image Size: 340 x 270 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 7ALMTF049237
(II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 150 MHz
(II) intel(0): Monitor name: ASUS VB191
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff000469b41955c00000
(II) intel(0): 2911010380261e78ea8585a6574a9c26
(II) intel(0): 125054bfee8081cf818f714f81800101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300540e1100001e000000ff0037414c
(II) intel(0): 4d54463034393233370a000000fd0037
(II) intel(0): 4b1e530f000a202020202020000000fc
(II) intel(0): 00415355532056423139310a202000b8
(II) intel(0): Printing probed modes for output DVI1
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): EDID for output DP1
(II) intel(0): EDID for output DVI2
(II) intel(0): EDID for output DP2
(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: SAM Model: 1ff Serial#: 0
(II) intel(0): Year: 2006 Week: 41
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 89 vert.: 50
(II) intel(0): Gamma: 2.40
(II) intel(0): DPMS capabilities: Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.632 redY: 0.357 greenX: 0.289 greenY: 0.596
(II) intel(0): blueX: 0.143 blueY: 0.085 whiteX: 0.280 whiteY: 0.290
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 85.5 MHz Image Size: 885 x 498 mm
(II) intel(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
(II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 65.0 MHz Image Size: 885 x 498 mm
(II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) intel(0): Ranges: V min: 60 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 90 MHz
(II) intel(0): Monitor name: SAMSUNG
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004c2dff0100000000
(II) intel(0): 291001036859328c2ae2bda15b4a9824
(II) intel(0): 15474aadce0001010101010101010101
(II) intel(0): 010101010101662150b051001b304070
(II) intel(0): 360075f23100001e6419004041002630
(II) intel(0): 1888360075f231000018000000fd003c
(II) intel(0): 4b1e3d09000a202020202020000000fc
(II) intel(0): 0053414d53554e470a202020202000c6
(II) intel(0): EDID vendor "SAM", prod id 511
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): EDID for output DVI1
(II) intel(0): Manufacturer: ACI Model: 19b4 Serial#: 49237
(II) intel(0): Year: 2007 Week: 41
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.340 greenX: 0.290 greenY: 0.610
(II) intel(0): blueX: 0.150 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1280 vsize 720 refresh: 75 vid: 53121
(II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) intel(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 108.0 MHz Image Size: 340 x 270 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 7ALMTF049237
(II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 150 MHz
(II) intel(0): Monitor name: ASUS VB191
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff000469b41955c00000
(II) intel(0): 2911010380261e78ea8585a6574a9c26
(II) intel(0): 125054bfee8081cf818f714f81800101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300540e1100001e000000ff0037414c
(II) intel(0): 4d54463034393233370a000000fd0037
(II) intel(0): 4b1e530f000a202020202020000000fc
(II) intel(0): 00415355532056423139310a202000b8
(II) intel(0): Printing probed modes for output DVI1
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): EDID for output DP1
(II) intel(0): EDID for output DVI2
(II) intel(0): EDID for output DP2
(II) intel(0): EDID for output VGA1
(II) intel(0): Manufacturer: SAM Model: 1ff Serial#: 0
(II) intel(0): Year: 2006 Week: 41
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync: Separate
(II) intel(0): Max Image Size [cm]: horiz.: 89 vert.: 50
(II) intel(0): Gamma: 2.40
(II) intel(0): DPMS capabilities: Off; RGB/Color Display
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.632 redY: 0.357 greenX: 0.289 greenY: 0.596
(II) intel(0): blueX: 0.143 blueY: 0.085 whiteX: 0.280 whiteY: 0.290
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 85.5 MHz Image Size: 885 x 498 mm
(II) intel(0): h_active: 1360 h_sync: 1424 h_sync_end 1536 h_blank_end 1792 h_border: 0
(II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 795 v_border: 0
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 65.0 MHz Image Size: 885 x 498 mm
(II) intel(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) intel(0): Ranges: V min: 60 V max: 75 Hz, H min: 30 H max: 61 kHz, PixClock max 90 MHz
(II) intel(0): Monitor name: SAMSUNG
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff004c2dff0100000000
(II) intel(0): 291001036859328c2ae2bda15b4a9824
(II) intel(0): 15474aadce0001010101010101010101
(II) intel(0): 010101010101662150b051001b304070
(II) intel(0): 360075f23100001e6419004041002630
(II) intel(0): 1888360075f231000018000000fd003c
(II) intel(0): 4b1e3d09000a202020202020000000fc
(II) intel(0): 0053414d53554e470a202020202000c6
(II) intel(0): EDID vendor "SAM", prod id 511
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Printing probed modes for output VGA1
(II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): EDID for output DVI1
(II) intel(0): Manufacturer: ACI Model: 19b4 Serial#: 49237
(II) intel(0): Year: 2007 Week: 41
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.650 redY: 0.340 greenX: 0.290 greenY: 0.610
(II) intel(0): blueX: 0.150 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@67Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@56Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1152x870@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1280 vsize 720 refresh: 75 vid: 53121
(II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) intel(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 108.0 MHz Image Size: 340 x 270 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Serial No: 7ALMTF049237
(II) intel(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 150 MHz
(II) intel(0): Monitor name: ASUS VB191
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff000469b41955c00000
(II) intel(0): 2911010380261e78ea8585a6574a9c26
(II) intel(0): 125054bfee8081cf818f714f81800101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300540e1100001e000000ff0037414c
(II) intel(0): 4d54463034393233370a000000fd0037
(II) intel(0): 4b1e530f000a202020202020000000fc
(II) intel(0): 00415355532056423139310a202000b8
(II) intel(0): Printing probed modes for output DVI1
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): EDID for output DP1
(II) intel(0): EDID for output DVI2
(II) intel(0): EDID for output DP2
Reply to: