Bug#551082: dpkg-reconfigure -phigh xserver-xorg does not create xorg.conf anymore
Package: xserver-xorg
Version: 1:7.4+4
Severity: normal
due to the usual shortcomings of automatisms i am forced to make some manuyl settings to get Xorg running correctly.
iirc
dpkg-reconfigure -phigh xserver-xorg
is supposed to create an xorg.conf -- but it doesn't anymore.
how is one supposed to get a dump of that xorg.conf X is using when autodetecting?
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Oct 14 13:39 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1695728 Oct 13 13:31 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
/etc/X11/xorg.conf does not exist.
Xorg X server log files on system:
-rw-r--r-- 1 root root 47521 Oct 15 14:22 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.8-dsa-ia32 i686 Debian
Current Operating System: Linux mcrkoord 2.6.30-2-686 #1 SMP Sat Sep 26 01:16:22 UTC 2009 i686
Build Date: 13 October 2009 11:25:51AM
xorg-server 2:1.6.5-1 (buildd@murphy.debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 15 11:24:40 2009
(II) Loader magic: 0x6c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2772:1734:1084 Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0xf0080000/524288, 0xe0000000/268435456, 0xf0040000/262144, I/O @ 0x00002000/8
(==) Using default built-in configuration (39 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default i810 Device 0"
Driver "i810"
EndSection
Section "Screen"
Identifier "Builtin Default i810 Screen 0"
Device "Builtin Default i810 Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default i810 Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default i810 Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default i810 Device 0"
(==) No monitor specified for screen "Builtin Default i810 Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (3)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 2.9.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "i810"
(WW) Warning, couldn't open module i810
(II) UnloadModule: "i810"
(EE) Failed to load module "i810" (module does not exist, 0)
(II) LoadModule: "vesa"
(WW) Warning, couldn't open module vesa
(II) UnloadModule: "vesa"
(EE) Failed to load module "vesa" (module does not exist, 0)
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945G
(--) intel(0): Chipset: "945G"
(--) intel(0): Linear framebuffer at 0xE0000000
(--) intel(0): IO registers at addr 0xF0080000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): the SDVO device with slave addr 70 is found on DVO 1 port
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
(II) intel(0): Output TMDS-1 has no monitor section
(II) intel(0): SDVOB: device VID/DID: 04:AA.02, clock range 25.0MHz - 165.0MHz
(II) intel(0): SDVOB: 1 input channel
(II) intel(0): SDVOB: TMDS0 output reported
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): EDID for output VGA
(II) intel(0): I2C device "SDVOB DDC Bus:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "SDVOB DDC Bus:ddc2" registered at address 0xA0.
(II) intel(0): EDID for output TMDS-1
(II) intel(0): Manufacturer: FUS Model: 550 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 35
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: P17-2
(II) intel(0): Serial No: YEHH095710
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff001ab3500501010101
(II) intel(0): 230f010380221b782aee95a3544c9926
(II) intel(0): 0f5054a54f0081800101010101010101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520e1100001e000000fd00384c1e
(II) intel(0): 520e000a202020202020000000fc0050
(II) intel(0): 31372d320a20202020202020000000ff
(II) intel(0): 00594548483039353731300a202000ae
(II) intel(0): EDID vendor "FUS", prod id 1360
(II) intel(0): Printing probed modes for output TMDS-1
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Output VGA disconnected
(II) intel(0): Output TMDS-1 connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output TMDS-1 using initial mode 1280x1024
(EE) intel(0): First SDVOB output reported failure to sync
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) intel(0): Kernel reported 110080 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 440316 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000001f800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000001f80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0fff5000: end of memory manager
(EE) intel(0): First SDVOB output reported failure to sync
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output TMDS-1 is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 270
(EE) config/hal: couldn't initialise context: unknown error (null)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event1"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
(**) ImPS/2 Logitech Wheel Mouse: always reports core events
(**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4"
(II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
(II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
(II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
(II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
(**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
(**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
(**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
(**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
(**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
(II) ImPS/2 Logitech Wheel Mouse: initialized for relative axes.
(II) config/hal: Adding input device Logitech Trackball
(**) Logitech Trackball: always reports core events
(**) Logitech Trackball: Device: "/dev/input/event6"
(II) Logitech Trackball: Found 3 mouse buttons
(II) Logitech Trackball: Found x and y relative axes
(II) Logitech Trackball: Found scroll wheel(s)
(II) Logitech Trackball: Configuring as mouse
(**) Logitech Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Trackball" (type: MOUSE)
(**) Logitech Trackball: (accel) keeping acceleration scheme 1
(**) Logitech Trackball: (accel) filter chain progression: 2.00
(**) Logitech Trackball: (accel) filter stage 0: 20.00 ms
(**) Logitech Trackball: (accel) set acceleration profile 0
(II) Logitech Trackball: initialized for relative axes.
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "de"
(**) Option "xkb_variant" "nodeadkeys"
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) intel(0): First SDVOB output reported failure to sync
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000001f800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000001f80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0fff5000: end of memory manager
(EE) intel(0): First SDVOB output reported failure to sync
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output TMDS-1 is connected to pipe A
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) ImPS/2 Logitech Wheel Mouse: Device reopened after 1 attempts.
(II) Logitech Trackball: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) intel(0): First SDVOB output reported failure to sync
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000001f800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000001f80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(EE) intel(0): First SDVOB output reported failure to sync
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output TMDS-1 is connected to pipe A
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) ImPS/2 Logitech Wheel Mouse: Device reopened after 1 attempts.
(II) Logitech Trackball: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) intel(0): First SDVOB output reported failure to sync
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000001f800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000001f80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(EE) intel(0): First SDVOB output reported failure to sync
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output TMDS-1 is connected to pipe A
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) ImPS/2 Logitech Wheel Mouse: Device reopened after 1 attempts.
(II) Logitech Trackball: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) intel(0): First SDVOB output reported failure to sync
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000001f800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000001f80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(EE) intel(0): First SDVOB output reported failure to sync
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output TMDS-1 is connected to pipe A
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) ImPS/2 Logitech Wheel Mouse: Device reopened after 1 attempts.
(II) Logitech Trackball: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) intel(0): First SDVOB output reported failure to sync
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000001f800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000001f80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(EE) intel(0): First SDVOB output reported failure to sync
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output TMDS-1 is connected to pipe A
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) ImPS/2 Logitech Wheel Mouse: Device reopened after 1 attempts.
(II) Logitech Trackball: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) intel(0): First SDVOB output reported failure to sync
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000001f800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000001f80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(EE) intel(0): First SDVOB output reported failure to sync
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output TMDS-1 is connected to pipe A
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) ImPS/2 Logitech Wheel Mouse: Device reopened after 1 attempts.
(II) Logitech Trackball: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) intel(0): First SDVOB output reported failure to sync
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000001f800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000001f80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(EE) intel(0): First SDVOB output reported failure to sync
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output TMDS-1 is connected to pipe A
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) ImPS/2 Logitech Wheel Mouse: Device reopened after 1 attempts.
(II) Logitech Trackball: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) intel(0): First SDVOB output reported failure to sync
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000001f800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000001f80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(EE) intel(0): First SDVOB output reported failure to sync
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output TMDS-1 is connected to pipe A
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) ImPS/2 Logitech Wheel Mouse: Device reopened after 1 attempts.
(II) Logitech Trackball: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) intel(0): First SDVOB output reported failure to sync
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000001f800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000001f80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(EE) intel(0): First SDVOB output reported failure to sync
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output TMDS-1 is connected to pipe A
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) ImPS/2 Logitech Wheel Mouse: Device reopened after 1 attempts.
(II) Logitech Trackball: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(EE) intel(0): First SDVOB output reported failure to sync
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x000000001f800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x000000001f80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0fff4fff: DRI memory manager (254168 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0fff5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(EE) intel(0): First SDVOB output reported failure to sync
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output TMDS-1 is connected to pipe A
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) ImPS/2 Logitech Wheel Mouse: Device reopened after 1 attempts.
(II) Logitech Trackball: Device reopened after 1 attempts.
(II) Power Button: Device reopened after 1 attempts.
(II) intel(0): EDID for output VGA
(II) intel(0): EDID for output TMDS-1
(II) intel(0): Manufacturer: FUS Model: 550 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 35
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: P17-2
(II) intel(0): Serial No: YEHH095710
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff001ab3500501010101
(II) intel(0): 230f010380221b782aee95a3544c9926
(II) intel(0): 0f5054a54f0081800101010101010101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520e1100001e000000fd00384c1e
(II) intel(0): 520e000a202020202020000000fc0050
(II) intel(0): 31372d320a20202020202020000000ff
(II) intel(0): 00594548483039353731300a202000ae
(II) intel(0): EDID vendor "FUS", prod id 1360
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "FUS", prod id 1360
(II) intel(0): Printing probed modes for output TMDS-1
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): EDID for output VGA
(II) intel(0): EDID for output TMDS-1
(II) intel(0): Manufacturer: FUS Model: 550 Serial#: 16843009
(II) intel(0): Year: 2005 Week: 35
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 27
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: Off
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported established timings:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported standard timings:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): Supported detailed timing:
(II) intel(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 140 MHz
(II) intel(0): Monitor name: P17-2
(II) intel(0): Serial No: YEHH095710
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff001ab3500501010101
(II) intel(0): 230f010380221b782aee95a3544c9926
(II) intel(0): 0f5054a54f0081800101010101010101
(II) intel(0): 010101010101302a009851002a403070
(II) intel(0): 1300520e1100001e000000fd00384c1e
(II) intel(0): 520e000a202020202020000000fc0050
(II) intel(0): 31372d320a20202020202020000000ff
(II) intel(0): 00594548483039353731300a202000ae
(II) intel(0): EDID vendor "FUS", prod id 1360
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): EDID vendor "FUS", prod id 1360
(II) intel(0): Printing probed modes for output TMDS-1
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
HAL Information (lshal):
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'button', 'input.keys'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
input.device = '/dev/input/event1' (string)
input.product = 'Power Button' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'de' (string)
input.xkb.model = 'pc105' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = 'nodeadkeys' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'button', 'input.keys'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string)
input.device = '/dev/input/event2' (string)
input.product = 'Power Button' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'de' (string)
input.xkb.model = 'pc105' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = 'nodeadkeys' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
access_control.file = '/dev/input/event4' (string)
access_control.type = 'mouse' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
info.product = 'ImPS/2 Logitech Wheel Mouse' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string)
input.device = '/dev/input/event4' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
input.product = 'ImPS/2 Logitech Wheel Mouse' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event4' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input4/event4' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string)
input.device = '/dev/input/event0' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.product = 'AT Translated Set 2 keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'de' (string)
input.xkb.model = 'pc105' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = 'nodeadkeys' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input0/event0' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_46d_c404_noserial_if0_logicaldev_input'
access_control.file = '/dev/input/event6' (string)
access_control.type = 'mouse' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c404_noserial_if0' (string)
info.product = 'Logitech Trackball' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c404_noserial_if0_logicaldev_input' (string)
input.device = '/dev/input/event6' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_46d_c404_noserial_if0' (string)
input.product = 'Logitech Trackball' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event6' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input6/event6' (string)
DRM Information from dmesg:
[ 4.539649] Linux agpgart interface v0.103
[ 6.118747] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[ 6.137735] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 6.159217] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 15.836970] [drm] Initialized drm 1.1.0 20060810
[ 15.886945] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages xserver-xorg depends on:
ii console-setup 1.45 console font and keymap setup prog
ii hal 0.5.13-3 Hardware Abstraction Layer
ii libc6 2.9-27 GNU C Library: Shared libraries
ii x11-xkb-utils 7.4+3 X11 XKB utilities
ii xkb-data 1.6-1 X Keyboard Extension (XKB) configu
ii xserver-xorg-core 2:1.6.5-1 Xorg X server - core server
ii xserver-xorg-input-evdev [xse 1:2.2.5-1 X.Org X server -- evdev input driv
ii xserver-xorg-video-intel [xse 2:2.9.0-1 X.Org X server -- Intel i8xx, i9xx
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 7.6-1 A free implementation of the OpenG
ii udev 146-5 /dev/ and hotplug management daemo
xserver-xorg suggests no packages.
-- no debconf information
Reply to: