Bug#524185: ditto
severity 524185 serious
thanks
This just happened to me after an upgrade from lenny to current sid,
and it's damned annoying. I've logged into the machine over the network
and did a sudo killall xfce4-session which seems to have brought X down
gracefully, but after another startx, it's again dead.
The four requested files are attached.
I'll be fiddling with AllowEmptyInput now...
--
2. That which causes joy or happiness.
# /etc/X11/xorg.conf -- X server configuration file
Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen 0" 0 0
# InputDevice "Chicony KB-5181 Keyboard"
InputDevice "Genius ErgoMedia 700 Keyboard"
InputDevice "Logitech M-S48a/M-BJ69"
# InputDevice "serijski mis"
EndSection
# Section "ServerLayout"
# Identifier "DualHead"
# Screen "Screen 0" Above "Screen 1"
# Screen "Screen 1" 0 0
# InputDevice "Chicony KB-5181 Keyboard"
# InputDevice "Genius ErgoMedia 700 Keyboard"
# InputDevice "Logitech M-S48a/M-BJ69"
# EndSection
Section "Files"
# FontPath "unix/:7101" # local font server
FontPath "/usr/share/fonts/X11/100dpi:unscaled"
FontPath "/usr/share/fonts/X11/75dpi:unscaled"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/truetype"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "ddc"
Load "dbe"
Load "dri"
Load "extmod"
# Load "GLcore"
Load "glx"
Load "record"
Load "bitmap"
Load "freetype"
Load "type1"
Load "vbe"
Load "int10"
SubSection "extmod"
Option "omit XFree86-DGA" # don't initialise the DGA extension
EndSubSection
EndSection
# Section "Extensions"
# Option "Composite" "Enable"
# EndSection
Section "InputDevice"
Identifier "Genius ErgoMedia 700 Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "base"
Option "XkbModel" "pc105"
Option "XkbLayout" "hr"
EndSection
Section "InputDevice"
Identifier "Chicony KB-5181 Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "hr"
EndSection
Section "InputDevice"
Identifier "Logitech M-S48a/M-BJ69"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/gpmdata"
# Option "Protocol" "ImPS/2"
Option "Protocol" "IntelliMouse"
Option "ZAxisMapping" "4 5"
EndSection
#Section "InputDevice"
# Identifier "serijski mis"
# Driver "mouse"
# Option "CorePointer"
# Option "Device" "/dev/ttyS2"
# Option "Protocol" "Logitech"
#EndSection
Section "Monitor"
# zapravo moze 75Hz, ali pise da je bolje 60Hz
Identifier "Samsung SyncMaster 940B"
HorizSync 30-81
VertRefresh 50-60
Option "DPMS"
EndSection
# Section "Monitor"
# Identifier "TV"
# HorizSync 31.5-31.5
# VertRefresh 20.0-60.0
# Option "DPMS"
# EndSection
Section "Device"
Identifier "Gainward Bliss 7600GT PCX"
Driver "nv"
# Driver "nvidia"
# Option "RenderAccel" "true"
BusID "PCI:1:0:0"
EndSection
## Section "Device"
## Identifier "ASUS ATI Radeon EAX1600 SILENT"
## Driver "fglrx"
## # Option "TVStandard" "VIDEO"
## # Option "TVFormat" "PAL-B"
## Option "VideoOverlay" "on"
## Option "OpenGLOverlay" "off"
## Option "OverlayOnCRTC2" "0"
## # Option "EnableMonitor" "tv"
## ## Driver "radeon"
## BusID "PCI:1:0:0"
## EndSection
##
## # Section "Device"
## # Identifier "ASUS ATI Radeon EAX1600 SILENT (2)"
## # Driver "fglrx"
## # BusID "PCI:1:0:1"
## # Screen 1
## # EndSection
Section "Screen"
Identifier "Screen 0"
# Device "ASUS ATI Radeon EAX1600 SILENT"
Device "Gainward Bliss 7600GT PCX"
Monitor "Samsung SyncMaster 940B"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480" "400x300"
EndSubSection
EndSection
# Section "Screen"
# Identifier "Screen 1"
## Device "ASUS ATI Radeon EAX1600 SILENT (2)"
# Device "Gainward Bliss 7600GT PCX"
# Monitor "TV"
# DefaultDepth 24
# SubSection "Display"
# Depth 24
# Modes "1024x768" "800x600" "640x480" "400x300"
# EndSubSection
# EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Section "ServerFlags"
Option "AIGLX" "off"
EndSection
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.3.901 (1.6.4 RC 1)
Release Date: 2009-8-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-1-amd64 x86_64 Debian
Current Operating System: Linux pork 2.6.30.4 #2 SMP PREEMPT Thu Aug 6 00:00:45 CEST 2009 x86_64
Build Date: 14 September 2009 01:42:52PM
xorg-server 2:1.6.3.901-1 (jcristau@debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 24 20:22:35 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen 0" (0)
(**) | |-->Monitor "Samsung SyncMaster 940B"
(**) | |-->Device "Gainward Bliss 7600GT PCX"
(**) |-->Input Device "Genius ErgoMedia 700 Keyboard"
(**) |-->Input Device "Logitech M-S48a/M-BJ69"
(**) Option "AIGLX" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/100dpi:unscaled,
/usr/share/fonts/X11/75dpi:unscaled,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/truetype,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Genius ErgoMedia 700 Keyboard
(WW) Disabling Logitech M-S48a/M-BJ69
(II) Loader magic: 0xdc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 9
(--) PCI:*(0:1:0:0) 10de:0391:10b0:0401 nVidia Corporation G73 [GeForce 7600 GT] rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 177.80 Wed Oct 1 15:09:29 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "extmod"
(II) Reloading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 1.6.2.901, module version = 2.1.14
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
GeForce 6100 nForce 420, GeForce 8800 GTX, GeForce 8800 GTS,
GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
GeForce GTX 295, GeForce GTX 280, GeForce GTX 260, GeForce GTX 285,
Quadro CX, Quadro FX 5800, Quadro FX 4800, Quadro FX 3800,
GeForce 8800 GTS 512, GeForce 9800 GT, GeForce 8800 GT,
GeForce 9800 GX2, GeForce 9800 GT, GeForce 8800 GS,
GeForce 9800M GTX, GeForce 8800M GTS, GeForce 9800M GT,
GeForce 8800M GTX, GeForce 8800 GS, GeForce 9600 GSO,
GeForce 8800 GT, GeForce 9800 GTX, GeForce 9800 GTX+,
GeForce 9800 GT, GeForce GTS 250, GeForce 9800M GTX, Quadro FX 3700,
Quadro FX 3600M, Quadro FX 3700M, GeForce 9600 GT, GeForce 9600 GS,
GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
GeForce 9800M GTS, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
GeForce 9400 GT, GeForce 9500 GT, GeForce GT 120, GeForce 9600M GT,
GeForce 9600M GS, GeForce 9600M GT, GeForce 9700M GT,
GeForce 9500M G, GeForce 9650M GT, GeForce 9500 GT, Quadro FX 380,
Quadro FX 580, Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS,
GeForce 8400 GS, GeForce 9300M GS, GeForce G100, GeForce 9200M GS,
GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M, Quadro NVS 420,
Quadro FX 370 LP, Quadro NVS 450, Quadro NVS 295
(II) Primary Device is: PCI 01@00:00:0
(--) NV: Found NVIDIA GeForce 7600 GT at 01@00:00:0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce 7600 GT"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xD0000000
(--) NV(0): MMIO registers at 0xFA000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
(--) NV(0): ...can't find one
(II) NV(0): Probing for analog device on output B...
(--) NV(0): ...can't find one
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: SAM Model: 1bb Serial#: 1212231993
(II) NV(0): Year: 2005 Week: 47
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: Off
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
(II) NV(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported established timings:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): 1152x870@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported standard timings:
(II) NV(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) NV(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) NV(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
(II) NV(0): Monitor name: SyncMaster
(II) NV(0): Serial No: HMDYB01784
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff004c2dbb0139314148
(II) NV(0): 2f0f010380261e782ade95a3544c9926
(II) NV(0): 0f5054bfef8081808140714f01010101
(II) NV(0): 010101010101302a009851002a403070
(II) NV(0): 1300782d1100001e000000fd00384b1e
(II) NV(0): 510e000a202020202020000000fc0053
(II) NV(0): 796e634d61737465720a2020000000ff
(II) NV(0): 00484d44594230313738340a20200049
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): ... none found
(--) NV(0): CRTC 0 is currently programmed for DFP
(II) NV(0): Using DFP on CRTC 0
(--) NV(0): Panel size is 1280 x 1024
(II) NV(0): NOTE: This driver cannot reconfigure the BIOS-programmed size.
(II) NV(0): These dimensions will be used as the panel size for mode validation.
(II) NV(0): EDID vendor "SAM", prod id 443
(II) NV(0): Using hsync ranges from config file
(II) NV(0): Using vrefresh ranges from config file
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NV(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) NV(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NV(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NV(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NV(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NV(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) NV(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) NV(0): Panel is TMDS
(--) NV(0): VideoRAM: 262144 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): Samsung SyncMaster 940B: Using hsync range of 30.00-81.00 kHz
(II) NV(0): Samsung SyncMaster 940B: Using vrefresh range of 50.00-60.00 Hz
(II) NV(0): Samsung SyncMaster 940B: Using maximum pixel clock of 140.00 MHz
(II) NV(0): Clock range: 12.00 to 400.00 MHz
(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
(II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x960" (hsync out of range)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x1024" (hsync out of range)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1792x1344" (exceeds panel dimensions)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1856x1392" (exceeds panel dimensions)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "832x624" (vrefresh out of range)
(II) NV(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) NV(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1360x768" (exceeds panel dimensions)
(II) NV(0): Not using default mode "680x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1440x900" (exceeds panel dimensions)
(II) NV(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1600x1024" (exceeds panel dimensions)
(II) NV(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1680x1050" (exceeds panel dimensions)
(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1080" (exceeds panel dimensions)
(II) NV(0): Not using default mode "960x540" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1200" (exceeds panel dimensions)
(II) NV(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1920x1440" (exceeds panel dimensions)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (exceeds panel dimensions)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using driver mode "640x480" (vrefresh out of range)
(II) NV(0): Not using driver mode "640x480" (vrefresh out of range)
(II) NV(0): Not using driver mode "640x480" (vrefresh out of range)
(II) NV(0): Not using driver mode "720x400" (vrefresh out of range)
(II) NV(0): Not using driver mode "1280x1024" (vrefresh out of range)
(II) NV(0): Not using driver mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using driver mode "1024x768" (vrefresh out of range)
(II) NV(0): Not using driver mode "832x624" (vrefresh out of range)
(II) NV(0): Not using driver mode "800x600" (vrefresh out of range)
(II) NV(0): Not using driver mode "800x600" (vrefresh out of range)
(II) NV(0): Not using driver mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using driver mode "1152x864" (vrefresh out of range)
(II) NV(0): Not using mode "400x300" (no mode of this name)
(--) NV(0): Virtual size is 1280x1024 (pitch 1280)
(**) NV(0): *Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NV(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NV(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NV(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) NV(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NV(0): Driver mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NV(0): Driver mode "1280x1024": 90.8 MHz, 63.0 kHz, 59.8 Hz
(II) NV(0): Modeline "1280x1024"x59.8 90.75 1280 1328 1360 1440 1024 1027 1034 1054 +hsync -vsync (63.0 kHz)
(**) NV(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NV(0): Driver mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) NV(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) NV(0): Default mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz
(II) NV(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
(**) NV(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NV(0): Driver mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NV(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NV(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) NV(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) NV(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NV(0): Display dimensions: (380, 300) mm
(**) NV(0): DPI set to (85, 86)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.3.901, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Option "dpms"
(**) NV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
SELinux: Disabled on system, not enabling in X server
Dumping 107 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
info.addons = {'hald-addon-cpufreq', 'hald-addon-acpi'} (string list)
info.callouts.add = {'hal-acl-tool --remove-all', 'hal-storage-cleanup-all-mountpoints'} (string list)
info.callouts.session_active = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_add = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_inactive = {'hal-acl-tool --reconfigure'} (string list)
info.callouts.session_remove = {'hal-acl-tool --reconfigure'} (string list)
info.capabilities = {'cpufreq_control'} (string list)
info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement', 'org.freedesktop.Hal.Device.CPUFreq'} (string list)
info.product = 'Computer' (string)
info.subsystem = 'unknown' (string)
info.udi = '/org/freedesktop/Hal/devices/computer' (string)
org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 'enable_power_save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 'hal-system-power-hibernate', 'hal-system-power-shutdown', 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_names = {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 'SetPowerSave'} (string list)
org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i', 'i', '', '', '', 'b'} (string list)
org.freedesktop.Hal.version = '0.5.13' (string)
org.freedesktop.Hal.version.major = 0 (0x0) (int)
org.freedesktop.Hal.version.micro = 13 (0xd) (int)
org.freedesktop.Hal.version.minor = 5 (0x5) (int)
power_management.acpi.linux.version = '20090320' (string)
power_management.can_hibernate = true (bool)
power_management.can_suspend = true (bool)
power_management.can_suspend_hybrid = true (bool)
power_management.is_powersave_set = false (bool)
power_management.quirk.dpms_on = true (bool)
power_management.quirk.dpms_suspend = true (bool)
power_management.quirk.vbe_post = true (bool)
power_management.quirk.vbemode_restore = true (bool)
power_management.quirk.vbestate_restore = true (bool)
power_management.quirk.vga_mode_3 = true (bool)
power_management.type = 'acpi' (string)
system.board.product = 'KN8 SLI(NF-CK804)' (string)
system.board.serial = '' (string)
system.board.vendor = 'http://www.abit.com.tw/' (string)
system.board.version = '1.x' (string)
system.chassis.manufacturer = '' (string)
system.chassis.type = 'Desktop' (string)
system.firmware.release_date = '11/11/2005' (string)
system.firmware.vendor = 'Phoenix Technologies, LTD' (string)
system.firmware.version = '6.00 PG' (string)
system.formfactor = 'desktop' (string)
system.hardware.primary_video.product = 913 (0x391) (int)
system.hardware.primary_video.vendor = 4318 (0x10de) (int)
system.hardware.product = '' (string)
system.hardware.serial = '' (string)
system.hardware.uuid = '00000000-0000-0000-0000-00508DDB4399' (string)
system.hardware.vendor = '' (string)
system.hardware.version = '' (string)
system.kernel.machine = 'x86_64' (string)
system.kernel.name = 'Linux' (string)
system.kernel.version = '2.6.30.4' (string)
system.kernel.version.major = 2 (0x2) (int)
system.kernel.version.micro = 30 (0x1e) (int)
system.kernel.version.minor = 6 (0x6) (int)
udi = '/org/freedesktop/Hal/devices/computer_alsa_timer'
access_control.file = '/dev/snd/timer' (string)
access_control.type = 'sound' (string)
alsa.device_file = '/dev/snd/timer' (string)
alsa.type = 'timer' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Timer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_timer' (string)
linux.device_file = '/dev/snd/timer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/timer' (string)
udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0'
access_control.file = '/dev/sequencer2' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer_0' (string)
linux.device_file = '/dev/sequencer2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/sequencer2' (string)
oss.device_file = '/dev/sequencer2' (string)
oss.type = 'sequencer' (string)
udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer'
access_control.file = '/dev/sequencer' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'OSS Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_oss_sequencer' (string)
linux.device_file = '/dev/sequencer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/sequencer' (string)
oss.device_file = '/dev/sequencer' (string)
oss.type = 'sequencer' (string)
udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer'
access_control.file = '/dev/snd/seq' (string)
access_control.type = 'sound' (string)
alsa.device_file = '/dev/snd/seq' (string)
alsa.type = 'sequencer' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'ALSA Sequencer Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_alsa_sequencer' (string)
linux.device_file = '/dev/snd/seq' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/seq' (string)
udi = '/org/freedesktop/Hal/devices/acpi_PWRF'
button.has_state = false (bool)
button.type = 'power' (string)
info.capabilities = {'button'} (string list)
info.category = 'button' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_PWRF' (string)
linux.acpi_path = '/proc/acpi/button/power/PWRF' (string)
linux.acpi_type = 11 (0xb) (int)
linux.hotplug_type = 4 (0x4) (int)
udi = '/org/freedesktop/Hal/devices/acpi_PWRB'
button.has_state = false (bool)
button.type = 'power' (string)
info.capabilities = {'button'} (string list)
info.category = 'button' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_PWRB' (string)
linux.acpi_path = '/proc/acpi/button/power/PWRB' (string)
linux.acpi_type = 11 (0xb) (int)
linux.hotplug_type = 4 (0x4) (int)
udi = '/org/freedesktop/Hal/devices/acpi_FAN'
fan.enabled = false (bool)
info.capabilities = {'fan'} (string list)
info.category = 'fan' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Fan' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_FAN' (string)
linux.acpi_path = '/proc/acpi/fan/FAN' (string)
linux.acpi_type = 2 (0x2) (int)
linux.hotplug_type = 4 (0x4) (int)
udi = '/org/freedesktop/Hal/devices/acpi_CPU0'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AMD Athlon(tm) 64 X2 Dual Core Processor 3800+' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU0' (string)
linux.acpi_path = '/proc/acpi/processor/CPU0' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = false (bool)
processor.number = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/acpi_CPU1'
info.capabilities = {'processor'} (string list)
info.category = 'processor' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AMD Athlon(tm) 64 X2 Dual Core Processor 3800+' (string)
info.udi = '/org/freedesktop/Hal/devices/acpi_CPU1' (string)
linux.acpi_path = '/proc/acpi/processor/CPU1' (string)
linux.acpi_type = 1 (0x1) (int)
linux.hotplug_type = 4 (0x4) (int)
processor.can_throttle = false (bool)
processor.number = 1 (0x1) (int)
udi = '/org/freedesktop/Hal/devices/net_computer_loopback'
info.capabilities = {'net', 'net.loopback'} (string list)
info.category = 'net.loopback' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Loopback device Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_computer_loopback' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/lo' (string)
net.address = '00:00:00:00:00:00' (string)
net.arp_proto_hw_id = 772 (0x304) (int)
net.interface = 'lo' (string)
net.linux.ifindex = 1 (0x1) (int)
net.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'System Board' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c01' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:09' (string)
pnp.description = 'System Board' (string)
pnp.id = 'PNP0c01' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:08' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0700'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PC standard floppy disk controller' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0700' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:07' (string)
pnp.description = 'PC standard floppy disk controller' (string)
pnp.id = 'PNP0700' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Math Coprocessor' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c04' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:06' (string)
pnp.description = 'Math Coprocessor' (string)
pnp.id = 'PNP0c04' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0800'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT-style speaker sound' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0800' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:05' (string)
pnp.description = 'AT-style speaker sound' (string)
pnp.id = 'PNP0800' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT Real-Time Clock' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0b00' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:04' (string)
pnp.description = 'AT Real-Time Clock' (string)
pnp.id = 'PNP0b00' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0200'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'AT DMA Controller' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0200' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:03' (string)
pnp.description = 'AT DMA Controller' (string)
pnp.id = 'PNP0200' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:02' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02'
info.linux.driver = 'system' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0c02' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:01' (string)
pnp.description = 'General ID for reserving resources required by PnP motherboard registers. (Not device specific.)' (string)
pnp.id = 'PNP0c02' (string)
udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'PnP Device (PNP0a08)' (string)
info.subsystem = 'pnp' (string)
info.udi = '/org/freedesktop/Hal/devices/pnp_PNP0a08' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pnp' (string)
linux.sysfs_path = '/sys/devices/pnp0/00:00' (string)
pnp.id = 'PNP0a08' (string)
udi = '/org/freedesktop/Hal/devices/platform_w83627hf_656'
info.linux.driver = 'w83627hf' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (w83627hf.656)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_w83627hf_656' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/w83627hf.656' (string)
platform.id = 'w83627hf.656' (string)
udi = '/org/freedesktop/Hal/devices/platform_vboxdrv_0'
info.linux.driver = 'vboxdrv' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (vboxdrv.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_vboxdrv_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/vboxdrv.0' (string)
platform.id = 'vboxdrv.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_serial8250'
info.linux.driver = 'serial8250' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (serial8250)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_serial8250' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/serial8250' (string)
platform.id = 'serial8250' (string)
udi = '/org/freedesktop/Hal/devices/platform_regulatory_0'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (regulatory.0)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_regulatory_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/regulatory.0' (string)
platform.id = 'regulatory.0' (string)
udi = '/org/freedesktop/Hal/devices/platform_pcspkr'
info.linux.driver = 'pcspkr' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (pcspkr)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_pcspkr' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/pcspkr' (string)
platform.id = 'pcspkr' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042'
info.linux.driver = 'i8042' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Platform Device (i8042)' (string)
info.subsystem = 'platform' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'platform' (string)
linux.sysfs_path = '/sys/devices/platform/i8042' (string)
platform.id = 'i8042' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 AUX port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1' (string)
serio.description = 'i8042 AUX port' (string)
serio.id = 'serio1' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port'
info.parent = '/org/freedesktop/Hal/devices/platform_i8042' (string)
info.product = 'i8042 KBD port' (string)
info.subsystem = 'serio' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'serio' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0' (string)
serio.description = 'i8042 KBD port' (string)
serio.id = 'serio0' (string)
udi = '/org/freedesktop/Hal/devices/pci_1022_1103'
info.linux.driver = 'k8temp' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'K8 [Athlon64/Opteron] Miscellaneous Control' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1022_1103' (string)
info.vendor = 'Advanced Micro Devices [AMD]' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.3' (string)
pci.product = 'K8 [Athlon64/Opteron] Miscellaneous Control' (string)
pci.product_id = 4355 (0x1103) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Advanced Micro Devices [AMD]' (string)
pci.vendor_id = 4130 (0x1022) (int)
udi = '/org/freedesktop/Hal/devices/pci_1022_1102'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'K8 [Athlon64/Opteron] DRAM Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1022_1102' (string)
info.vendor = 'Advanced Micro Devices [AMD]' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.2' (string)
pci.product = 'K8 [Athlon64/Opteron] DRAM Controller' (string)
pci.product_id = 4354 (0x1102) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Advanced Micro Devices [AMD]' (string)
pci.vendor_id = 4130 (0x1022) (int)
udi = '/org/freedesktop/Hal/devices/pci_1022_1101'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'K8 [Athlon64/Opteron] Address Map' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1022_1101' (string)
info.vendor = 'Advanced Micro Devices [AMD]' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.1' (string)
pci.product = 'K8 [Athlon64/Opteron] Address Map' (string)
pci.product_id = 4353 (0x1101) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Advanced Micro Devices [AMD]' (string)
pci.vendor_id = 4130 (0x1022) (int)
udi = '/org/freedesktop/Hal/devices/pci_1022_1100'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_1022_1100' (string)
info.vendor = 'Advanced Micro Devices [AMD]' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:18.0' (string)
pci.product = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration' (string)
pci.product_id = 4352 (0x1100) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'Advanced Micro Devices [AMD]' (string)
pci.vendor_id = 4130 (0x1022) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_5d_2'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 PCIE Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_5d_2' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0' (string)
pci.product = 'CK804 PCIE Bridge' (string)
pci.product_id = 93 (0x5d) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_391'
info.parent = '/org/freedesktop/Hal/devices/pci_10de_5d_2' (string)
info.product = 'G73 [GeForce 7600 GT]' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_391' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/0000:01:00.0' (string)
pci.device_class = 3 (0x3) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0e.0/0000:01:00.0' (string)
pci.product = 'G73 [GeForce 7600 GT]' (string)
pci.product_id = 913 (0x391) (int)
pci.subsys_product_id = 1025 (0x401) (int)
pci.subsys_vendor = 'CardExpert Technology' (string)
pci.subsys_vendor_id = 4272 (0x10b0) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_5d_1'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 PCIE Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_5d_1' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0d.0' (string)
pci.product = 'CK804 PCIE Bridge' (string)
pci.product_id = 93 (0x5d) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_5d_0'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 PCIE Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_5d_0' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0c.0' (string)
pci.product = 'CK804 PCIE Bridge' (string)
pci.product_id = 93 (0x5d) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_5d'
info.linux.driver = 'pcieport-driver' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 PCIE Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_5d' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0b.0' (string)
pci.product = 'CK804 PCIE Bridge' (string)
pci.product_id = 93 (0x5d) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_57'
info.linux.driver = 'forcedeth' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 Ethernet Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_57' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:0a.0' (string)
pci.product = 'CK804 Ethernet Controller' (string)
pci.product_id = 87 (0x57) (int)
pci.subsys_product_id = 7195 (0x1c1b) (int)
pci.subsys_vendor = 'ABIT Computer Corp.' (string)
pci.subsys_vendor_id = 5243 (0x147b) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/net_00_50_8d_db_43_99'
info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
info.category = 'net.80203' (string)
info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_57' (string)
info.product = 'Networking Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_50_8d_db_43_99' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/eth1' (string)
net.80203.mac_address = 345977340825 (0x508ddb4399) (uint64)
net.address = '00:50:8d:db:43:99' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'eth1' (string)
net.linux.ifindex = 2 (0x2) (int)
net.originating_device = '/org/freedesktop/Hal/devices/pci_10de_57' (string)
org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = {'hal-system-wol-supported', 'hal-system-wol-enabled', 'hal-system-wol-enable'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 'GetEnabled', 'SetEnabled'} (string list)
org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'} (string list)
udi = '/org/freedesktop/Hal/devices/pci_10de_5c'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 PCI Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_5c' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 1 (0x1) (int)
pci.device_subclass = 4 (0x4) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0' (string)
pci.product = 'CK804 PCI Bridge' (string)
pci.product_id = 92 (0x5c) (int)
pci.subsys_product_id = 0 (0x0) (int)
pci.subsys_vendor_id = 0 (0x0) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/pci_109e_878'
info.parent = '/org/freedesktop/Hal/devices/pci_10de_5c' (string)
info.product = 'Bt878 Audio Capture' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_109e_878' (string)
info.vendor = 'Brooktree Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/0000:05:08.1' (string)
pci.device_class = 4 (0x4) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/0000:05:08.1' (string)
pci.product = 'Bt878 Audio Capture' (string)
pci.product_id = 2168 (0x878) (int)
pci.subsys_product_id = 4376 (0x1118) (int)
pci.subsys_vendor = 'TERRATEC Electronic GmbH' (string)
pci.subsys_vendor_id = 5435 (0x153b) (int)
pci.vendor = 'Brooktree Corporation' (string)
pci.vendor_id = 4254 (0x109e) (int)
udi = '/org/freedesktop/Hal/devices/pci_109e_36e'
info.linux.driver = 'bttv' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_5c' (string)
info.product = 'Bt878 Video Capture' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_109e_36e' (string)
info.vendor = 'Brooktree Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/0000:05:08.0' (string)
pci.device_class = 4 (0x4) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/0000:05:08.0' (string)
pci.product = 'Bt878 Video Capture' (string)
pci.product_id = 878 (0x36e) (int)
pci.subsys_product_id = 4376 (0x1118) (int)
pci.subsys_vendor = 'TERRATEC Electronic GmbH' (string)
pci.subsys_vendor_id = 5435 (0x153b) (int)
pci.vendor = 'Brooktree Corporation' (string)
pci.vendor_id = 4254 (0x109e) (int)
udi = '/org/freedesktop/Hal/devices/pci_109e_36e_video4linux_0'
access_control.file = '/dev/video0' (string)
access_control.type = 'video4linux' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'video4linux', 'video4linux.video_capture', 'video4linux.video_overlay', 'video4linux.tuner', 'access_control'} (string list)
info.category = 'video4linux' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_109e_36e' (string)
info.product = 'BT878 video (Terratec TerraTVal' (string)
info.subsystem = 'video4linux' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_109e_36e_video4linux_0' (string)
linux.device_file = '/dev/video0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'video4linux' (string)
linux.sysfs_path = '/sys/class/video4linux/video0' (string)
video4linux.device = '/dev/video0' (string)
video4linux.version = '2' (string)
udi = '/org/freedesktop/Hal/devices/pci_109e_36e_video4linux'
access_control.file = '/dev/vbi0' (string)
access_control.type = 'video4linux' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'video4linux', 'video4linux.video_capture', 'video4linux.video_overlay', 'video4linux.tuner', 'access_control'} (string list)
info.category = 'video4linux' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_109e_36e' (string)
info.product = 'BT878 video (Terratec TerraTVal' (string)
info.subsystem = 'video4linux' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_109e_36e_video4linux' (string)
linux.device_file = '/dev/vbi0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'video4linux' (string)
linux.sysfs_path = '/sys/class/video4linux/vbi0' (string)
video4linux.device = '/dev/vbi0' (string)
video4linux.version = '2' (string)
udi = '/org/freedesktop/Hal/devices/pci_104c_8023'
info.linux.driver = 'ohci1394' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_5c' (string)
info.product = 'TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_104c_8023' (string)
info.vendor = 'Texas Instruments' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/0000:05:06.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 16 (0x10) (int)
pci.device_subclass = 0 (0x0) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:09.0/0000:05:06.0' (string)
pci.product = 'TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)' (string)
pci.product_id = 32803 (0x8023) (int)
pci.subsys_product_id = 7195 (0x1c1b) (int)
pci.subsys_vendor = 'ABIT Computer Corp.' (string)
pci.subsys_vendor_id = 5243 (0x147b) (int)
pci.vendor = 'Texas Instruments' (string)
pci.vendor_id = 4172 (0x104c) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_55'
info.linux.driver = 'sata_nv' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 Serial ATA Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_55' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 133 (0x85) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:08.0' (string)
pci.product = 'CK804 Serial ATA Controller' (string)
pci.product_id = 85 (0x55) (int)
pci.subsys_product_id = 7195 (0x1c1b) (int)
pci.subsys_vendor = 'ABIT Computer Corp.' (string)
pci.subsys_vendor_id = 5243 (0x147b) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_54'
info.linux.driver = 'sata_nv' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 Serial ATA Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_54' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 133 (0x85) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0' (string)
pci.product = 'CK804 Serial ATA Controller' (string)
pci.product_id = 84 (0x54) (int)
pci.subsys_product_id = 7195 (0x1c1b) (int)
pci.subsys_vendor = 'ABIT Computer Corp.' (string)
pci.subsys_vendor_id = 5243 (0x147b) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_54_scsi_host_0'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_54' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_54_scsi_host_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/host1' (string)
scsi_host.host = 1 (0x1) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_54_scsi_host_0_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_54_scsi_host_0' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_54_scsi_host_0_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/host1/target1:0:0/1:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 1 (0x1) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'ST3320620AS' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9'
block.device = '/dev/sdb' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 16 (0x10) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_54_scsi_host_0_scsi_device_lun0' (string)
info.product = 'ST3320620AS' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.vendor = 'ATA' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sdb' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'pci' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = '3.AA' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = false (bool)
storage.model = 'ST3320620AS' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = 'mbr' (string)
storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 320072933376 (0x4a85d56000) (uint64)
storage.requires_eject = false (bool)
storage.serial = 'SATA_ST3320620AS_5QF0M1Q9' (string)
storage.size = 320072933376 (0x4a85d56000) (uint64)
storage.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_1c21b39c_9111_4008_a69f_681fac33d43b'
block.device = '/dev/sdb8' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 24 (0x18) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.product = 'Volume (ext3)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_1c21b39c_9111_4008_a69f_681fac33d43b' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sdb/sdb8' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ext3' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '1.0' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'relatime', 'noexec', 'quiet', 'remount', 'exec', 'acl', 'user_xattr', 'data='} (string list)
volume.mount_point = '/bla4' (string)
volume.num_blocks = 230484492 (0xdbcea0c) (uint64)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 8 (0x8) (int)
volume.partition.start = 202062260736 (0x2f0bd96a00) (uint64)
volume.size = 118008059904 (0x1b79d41800) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '1c21b39c-9111-4008-a69f-681fac33d43b' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_B2B85041B850066F'
block.device = '/dev/sdb7' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 23 (0x17) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.product = 'BLA2' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_B2B85041B850066F' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sdb/sdb7' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ntfs-3g' (string)
volume.fstype.alternative = 'ntfs' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '3.1' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'BLA2' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'relatime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list)
volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'recover', 'norecover'} (string list)
volume.mount_point = '' (string)
volume.num_blocks = 312512382 (0x12a08f7e) (uint64)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 7 (0x7) (int)
volume.partition.start = 42055888896 (0x9cab9f000) (uint64)
volume.policy.mount_filesystem = 'ntfs-3g' (string)
volume.size = 160006339584 (0x25411efc00) (uint64)
volume.unmount.ntfs.valid_options = {'lazy'} (string list)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'B2B85041B850066F' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_4bcdf5be_1019093a_0ec687d8_dd62d1cc_0'
block.device = '/dev/sdb6' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 22 (0x16) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.product = 'Volume (linux_raid_member)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_4bcdf5be_1019093a_0ec687d8_dd62d1cc_0' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sdb/sdb6' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'linux_raid_member' (string)
volume.fsusage = 'raid' (string)
volume.fsversion = '0.90.0' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 40049982 (0x2631d3e) (uint64)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 6 (0x6) (int)
volume.partition.start = 21550265856 (0x5047ef600) (uint64)
volume.size = 20505590784 (0x4c63a7c00) (uint64)
volume.uuid = '4bcdf5be:1019093a:0ec687d8:dd62d1cc' (string)
udi = '/org/freedesktop/Hal/devices/volume_part4_size_1024_0'
block.device = '/dev/sdb4' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 20 (0x14) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.product = 'Volume' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part4_size_1024_0' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sdb/sdb4' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = '' (string)
volume.fsusage = 'partitiontable' (string)
volume.fsversion = '' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 2 (0x2) (uint64)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 4 (0x4) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 20522073600 (0x4c735fe00) (uint64)
volume.partition.type = '0x05' (string)
volume.partition.uuid = '' (string)
volume.size = 1024 (0x400) (uint64)
volume.uuid = '' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_2c94c08d_969d1201_2b1f06b4_1a79552a_0'
block.device = '/dev/sdb5' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 21 (0x15) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.product = 'Volume (linux_raid_member)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_2c94c08d_969d1201_2b1f06b4_1a79552a_0' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sdb/sdb5' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'linux_raid_member' (string)
volume.fsusage = 'raid' (string)
volume.fsversion = '0.90.0' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 2008062 (0x1ea3fe) (uint64)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 5 (0x5) (int)
volume.partition.start = 20522105856 (0x4c7367c00) (uint64)
volume.size = 1028127744 (0x3d47fc00) (uint64)
volume.uuid = '2c94c08d:969d1201:2b1f06b4:1a79552a' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_25c2fd32_da56dd2f_1b460b10_bfbaf595_0'
block.device = '/dev/sdb3' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 19 (0x13) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.product = 'Volume (linux_raid_member)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_25c2fd32_da56dd2f_1b460b10_bfbaf595_0' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sdb/sdb3' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'linux_raid_member' (string)
volume.fsusage = 'raid' (string)
volume.fsversion = '0.90.0' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 10024560 (0x98f670) (uint64)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 3 (0x3) (int)
volume.partition.start = 15389498880 (0x395491e00) (uint64)
volume.size = 5132574720 (0x131ece000) (uint64)
volume.uuid = '25c2fd32:da56dd2f:1b460b10:bfbaf595' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_ff0a4516_67810a33_d16f26a8_3dc132ed_0'
block.device = '/dev/sdb2' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 18 (0x12) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.product = 'Volume (linux_raid_member)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_ff0a4516_67810a33_d16f26a8_3dc132ed_0' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sdb/sdb2' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'linux_raid_member' (string)
volume.fsusage = 'raid' (string)
volume.fsversion = '0.90.0' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 10024560 (0x98f670) (uint64)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 2 (0x2) (int)
volume.partition.start = 10256924160 (0x2635c3e00) (uint64)
volume.size = 5132574720 (0x131ece000) (uint64)
volume.uuid = 'ff0a4516:67810a33:d16f26a8:3dc132ed' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_7B91C2FF519C8D4A'
block.device = '/dev/sdb1' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 17 (0x11) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_ST3320620AS_5QF0M1Q9' (string)
info.product = 'Volume (ntfs)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_7B91C2FF519C8D4A' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sdb/sdb1' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ntfs-3g' (string)
volume.fstype.alternative = 'ntfs' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '3.1' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'relatime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list)
volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'recover', 'norecover'} (string list)
volume.mount_point = '' (string)
volume.num_blocks = 20032992 (0x131ade0) (uint64)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.start = 32256 (0x7e00) (uint64)
volume.policy.mount_filesystem = 'ntfs-3g' (string)
volume.size = 10256891904 (0x2635bc000) (uint64)
volume.unmount.ntfs.valid_options = {'lazy'} (string list)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '7B91C2FF519C8D4A' (string)
udi = '/org/freedesktop/Hal/devices/pci_10de_54_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_54' (string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_54_scsi_host' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/host0' (string)
scsi_host.host = 0 (0x0) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_54_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_54_scsi_host' (string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_54_scsi_host_scsi_device_lun0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:07.0/host0/target0:0:0/0:0:0:0' (string)
scsi.bus = 0 (0x0) (int)
scsi.host = 0 (0x0) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'WDC WD3200KS-00P' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267'
block.device = '/dev/sda' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_54_scsi_host_scsi_device_lun0' (string)
info.product = 'WDC WD3200KS-00P' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.vendor = 'ATA' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda' (string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'pci' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = '21.0' (string)
storage.hotpluggable = false (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = false (bool)
storage.model = 'WDC WD3200KS-00P' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = 'mbr' (string)
storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 320072933376 (0x4a85d56000) (uint64)
storage.requires_eject = false (bool)
storage.serial = 'SATA_WDC_WD3200KS-00_WD-WCAPD2141267' (string)
storage.size = 320072933376 (0x4a85d56000) (uint64)
storage.vendor = 'ATA' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_B478814878810A76'
block.device = '/dev/sda8' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 8 (0x8) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.product = 'bla3' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_B478814878810A76' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda8' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ntfs-3g' (string)
volume.fstype.alternative = 'ntfs' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '3.1' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'bla3' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'relatime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list)
volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'recover', 'norecover'} (string list)
volume.mount_point = '' (string)
volume.num_blocks = 230484492 (0xdbcea0c) (uint64)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 8 (0x8) (int)
volume.partition.start = 202062260736 (0x2f0bd96a00) (uint64)
volume.policy.mount_filesystem = 'ntfs-3g' (string)
volume.size = 118008059904 (0x1b79d41800) (uint64)
volume.unmount.ntfs.valid_options = {'lazy'} (string list)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = 'B478814878810A76' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_450E_7074'
block.device = '/dev/sda7' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 7 (0x7) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.product = 'BLA1' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_450E_7074' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda7' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'vfat' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = 'FAT32' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = 'BLA1' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'relatime', 'noexec', 'quiet', 'remount', 'exec', 'utf8', 'shortname=', 'codepage=', 'iocharset=', 'umask=', 'dmask=', 'fmask=', 'uid=', 'flush'} (string list)
volume.mount_point = '/bla1' (string)
volume.num_blocks = 312512382 (0x12a08f7e) (uint64)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 7 (0x7) (int)
volume.partition.start = 42055888896 (0x9cab9f000) (uint64)
volume.size = 160006339584 (0x25411efc00) (uint64)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '450E-7074' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_4bcdf5be_1019093a_0ec687d8_dd62d1cc'
block.device = '/dev/sda6' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 6 (0x6) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.product = 'Volume (linux_raid_member)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_4bcdf5be_1019093a_0ec687d8_dd62d1cc' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda6' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'linux_raid_member' (string)
volume.fsusage = 'raid' (string)
volume.fsversion = '0.90.0' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 40049982 (0x2631d3e) (uint64)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 6 (0x6) (int)
volume.partition.start = 21550265856 (0x5047ef600) (uint64)
volume.size = 20505590784 (0x4c63a7c00) (uint64)
volume.uuid = '4bcdf5be:1019093a:0ec687d8:dd62d1cc' (string)
udi = '/org/freedesktop/Hal/devices/volume_part4_size_1024'
block.device = '/dev/sda4' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 4 (0x4) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.product = 'Volume' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_part4_size_1024' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda4' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = '' (string)
volume.fsusage = 'partitiontable' (string)
volume.fsversion = '' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 2 (0x2) (uint64)
volume.partition.flags = {} (string list)
volume.partition.label = '' (string)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 4 (0x4) (int)
volume.partition.scheme = 'mbr' (string)
volume.partition.start = 20522073600 (0x4c735fe00) (uint64)
volume.partition.type = '0x05' (string)
volume.partition.uuid = '' (string)
volume.size = 1024 (0x400) (uint64)
volume.uuid = '' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_2c94c08d_969d1201_2b1f06b4_1a79552a'
block.device = '/dev/sda5' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 5 (0x5) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.product = 'Volume (linux_raid_member)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_2c94c08d_969d1201_2b1f06b4_1a79552a' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda5' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'linux_raid_member' (string)
volume.fsusage = 'raid' (string)
volume.fsversion = '0.90.0' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 2008062 (0x1ea3fe) (uint64)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 5 (0x5) (int)
volume.partition.start = 20522105856 (0x4c7367c00) (uint64)
volume.size = 1028127744 (0x3d47fc00) (uint64)
volume.uuid = '2c94c08d:969d1201:2b1f06b4:1a79552a' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_25c2fd32_da56dd2f_1b460b10_bfbaf595'
block.device = '/dev/sda3' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 3 (0x3) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.product = 'Volume (linux_raid_member)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_25c2fd32_da56dd2f_1b460b10_bfbaf595' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda3' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'linux_raid_member' (string)
volume.fsusage = 'raid' (string)
volume.fsversion = '0.90.0' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 10024560 (0x98f670) (uint64)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 3 (0x3) (int)
volume.partition.start = 15389498880 (0x395491e00) (uint64)
volume.size = 5132574720 (0x131ece000) (uint64)
volume.uuid = '25c2fd32:da56dd2f:1b460b10:bfbaf595' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_ff0a4516_67810a33_d16f26a8_3dc132ed'
block.device = '/dev/sda2' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 2 (0x2) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.product = 'Volume (linux_raid_member)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_ff0a4516_67810a33_d16f26a8_3dc132ed' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda2' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'linux_raid_member' (string)
volume.fsusage = 'raid' (string)
volume.fsversion = '0.90.0' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 10024560 (0x98f670) (uint64)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 2 (0x2) (int)
volume.partition.start = 10256924160 (0x2635c3e00) (uint64)
volume.size = 5132574720 (0x131ece000) (uint64)
volume.uuid = 'ff0a4516:67810a33:d16f26a8:3dc132ed' (string)
udi = '/org/freedesktop/Hal/devices/volume_uuid_1460509560508002'
block.device = '/dev/sda1' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 1 (0x1) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
info.parent = '/org/freedesktop/Hal/devices/storage_serial_SATA_WDC_WD3200KS_00_WD_WCAPD2141267' (string)
info.product = 'Volume (ntfs)' (string)
info.udi = '/org/freedesktop/Hal/devices/volume_uuid_1460509560508002' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/sda/sda1' (string)
org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype extra_options', 'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount', 'Eject'} (string list)
org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'} (string list)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'ntfs-3g' (string)
volume.fstype.alternative = 'ntfs' (string)
volume.fsusage = 'filesystem' (string)
volume.fsversion = '3.1' (string)
volume.ignore = false (bool)
volume.is_disc = false (bool)
volume.is_mounted = true (bool)
volume.is_mounted_read_only = true (bool)
volume.is_partition = true (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount.ntfs.valid_options = {'ro', 'sync', 'dirsync', 'noatime', 'nodiratime', 'relatime', 'noexec', 'quiet', 'remount', 'exec', 'uid=', 'gid=', 'umask=', 'utf8'} (string list)
volume.mount.valid_options = {'ro', 'atime', 'noatime', 'relatime', 'fake_rw', 'no_def_opts', 'default_permissions', 'umask=', 'fmask=', 'dmask=', 'uid=', 'gid=', 'show_sys_files', 'silent', 'force', 'remove_hiberfile', 'locale=', 'streams_interface=', 'debug', 'no_detatch', 'sync', 'dirsync', 'nodiratime', 'noexec', 'quiet', 'remount', 'exec', 'recover', 'norecover'} (string list)
volume.mount_point = '/win' (string)
volume.num_blocks = 20032992 (0x131ade0) (uint64)
volume.partition.media_size = 320072933376 (0x4a85d56000) (uint64)
volume.partition.number = 1 (0x1) (int)
volume.partition.start = 32256 (0x7e00) (uint64)
volume.policy.mount_filesystem = 'ntfs-3g' (string)
volume.size = 10256891904 (0x2635bc000) (uint64)
volume.unmount.ntfs.valid_options = {'lazy'} (string list)
volume.unmount.valid_options = {'lazy'} (string list)
volume.uuid = '1460509560508002' (string)
udi = '/org/freedesktop/Hal/devices/pci_10de_53'
info.linux.driver = 'AMD_IDE' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 IDE' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_53' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0' (string)
pci.device_class = 1 (0x1) (int)
pci.device_protocol = 138 (0x8a) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0' (string)
pci.product = 'CK804 IDE' (string)
pci.product_id = 83 (0x53) (int)
pci.subsys_product_id = 7195 (0x1c1b) (int)
pci.subsys_vendor = 'ABIT Computer Corp.' (string)
pci.subsys_vendor_id = 5243 (0x147b) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_53_ide_1_0'
ide.channel = 0 (0x0) (int)
ide.host = 1 (0x1) (int)
info.linux.driver = 'ide-cdrom' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_53' (string)
info.product = 'IDE device (master)' (string)
info.subsystem = 'ide' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_53_ide_1_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'ide' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:06.0/ide1/1.0' (string)
udi = '/org/freedesktop/Hal/devices/storage_model__NEC_DVD_RW_ND_3520A'
access_control.file = '/dev/hdc' (string)
access_control.type = 'cdrom' (string)
block.device = '/dev/hdc' (string)
block.is_volume = false (bool)
block.major = 22 (0x16) (int)
block.minor = 0 (0x0) (int)
block.storage_device = '/org/freedesktop/Hal/devices/storage_model__NEC_DVD_RW_ND_3520A' (string)
info.addons = {'hald-addon-storage'} (string list)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'storage', 'block', 'storage.cdrom', 'access_control'} (string list)
info.category = 'storage' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage', 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_53_ide_1_0' (string)
info.product = '_NEC DVD_RW ND-3520A' (string)
info.udi = '/org/freedesktop/Hal/devices/storage_model__NEC_DVD_RW_ND_3520A' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path = '/sys/block/hdc' (string)
org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options', 'extra_options'} (string list)
org.freedesktop.Hal.Device.Storage.method_execpaths = {'hal-storage-eject', 'hal-storage-closetray'} (string list)
org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'} (string list)
org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} (string list)
storage.automount_enabled_hint = true (bool)
storage.bus = 'pci' (string)
storage.cdrom.bd = false (bool)
storage.cdrom.bdr = false (bool)
storage.cdrom.bdre = false (bool)
storage.cdrom.cdr = true (bool)
storage.cdrom.cdrw = true (bool)
storage.cdrom.dvd = true (bool)
storage.cdrom.dvdplusr = true (bool)
storage.cdrom.dvdplusrdl = true (bool)
storage.cdrom.dvdplusrw = true (bool)
storage.cdrom.dvdplusrwdl = false (bool)
storage.cdrom.dvdr = true (bool)
storage.cdrom.dvdram = false (bool)
storage.cdrom.dvdrdl = false (bool)
storage.cdrom.dvdrw = true (bool)
storage.cdrom.hddvd = false (bool)
storage.cdrom.hddvdr = false (bool)
storage.cdrom.hddvdrw = false (bool)
storage.cdrom.mo = false (bool)
storage.cdrom.mrw = true (bool)
storage.cdrom.mrw_w = true (bool)
storage.cdrom.read_speed = 8467 (0x2113) (int)
storage.cdrom.support_media_changed = true (bool)
storage.cdrom.support_multisession = true (bool)
storage.cdrom.write_speed = 8467 (0x2113) (int)
storage.cdrom.write_speeds = {'8467', '7056', '5645', '4234', '2822', '1411'} (string list)
storage.drive_type = 'cdrom' (string)
storage.firmware_version = '1.04' (string)
storage.hotpluggable = false (bool)
storage.media_check_enabled = true (bool)
storage.model = '_NEC DVD_RW ND-3520A' (string)
storage.no_partitions_hint = true (bool)
storage.originating_device = '/org/freedesktop/Hal/devices/computer' (string)
storage.partitioning_scheme = '' (string)
storage.removable = true (bool)
storage.removable.media_available = false (bool)
storage.removable.support_async_notification = false (bool)
storage.requires_eject = true (bool)
storage.size = 0 (0x0) (uint64)
storage.vendor = '' (string)
udi = '/org/freedesktop/Hal/devices/pci_10de_59'
info.linux.driver = 'Intel ICH' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 AC'97 Audio Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0' (string)
pci.device_class = 4 (0x4) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:04.0' (string)
pci.product = 'CK804 AC'97 Audio Controller' (string)
pci.product_id = 89 (0x59) (int)
pci.subsys_product_id = 7195 (0x1c1b) (int)
pci.subsys_vendor = 'ABIT Computer Corp.' (string)
pci.subsys_vendor_id = 5243 (0x147b) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_59_alsa_playback_2'
access_control.file = '/dev/snd/pcmC0D2p' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'NVidia CK804 with ALC850' (string)
alsa.device = 2 (0x2) (int)
alsa.device_file = '/dev/snd/pcmC0D2p' (string)
alsa.device_id = 'NVidia CK804 - IEC958' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'playback' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
info.product = 'NVidia CK804 - IEC958 ALSA Playback Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_59_alsa_playback_2' (string)
linux.device_file = '/dev/snd/pcmC0D2p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/pcmC0D2p' (string)
udi = '/org/freedesktop/Hal/devices/pci_10de_59_alsa_capture_1'
access_control.file = '/dev/snd/pcmC0D1c' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'NVidia CK804 with ALC850' (string)
alsa.device = 1 (0x1) (int)
alsa.device_file = '/dev/snd/pcmC0D1c' (string)
alsa.device_id = 'NVidia CK804 - MIC ADC' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'capture' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
info.product = 'NVidia CK804 - MIC ADC ALSA Capture Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_59_alsa_capture_1' (string)
linux.device_file = '/dev/snd/pcmC0D1c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/pcmC0D1c' (string)
udi = '/org/freedesktop/Hal/devices/pci_10de_59_alsa_playback_0'
access_control.file = '/dev/snd/pcmC0D0p' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'NVidia CK804 with ALC850' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0p' (string)
alsa.device_id = 'NVidia CK804' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'playback' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
info.product = 'NVidia CK804 ALSA Playback Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_59_alsa_playback_0' (string)
linux.device_file = '/dev/snd/pcmC0D0p' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/pcmC0D0p' (string)
udi = '/org/freedesktop/Hal/devices/pci_10de_59_alsa_capture_0'
access_control.file = '/dev/snd/pcmC0D0c' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'NVidia CK804 with ALC850' (string)
alsa.device = 0 (0x0) (int)
alsa.device_file = '/dev/snd/pcmC0D0c' (string)
alsa.device_id = 'NVidia CK804' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
alsa.pcm_class = 'generic' (string)
alsa.type = 'capture' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
info.product = 'NVidia CK804 ALSA Capture Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_59_alsa_capture_0' (string)
linux.device_file = '/dev/snd/pcmC0D0c' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/pcmC0D0c' (string)
udi = '/org/freedesktop/Hal/devices/pci_10de_59_oss_mixer__1'
access_control.file = '/dev/mixer' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
info.product = 'NVidia CK804 OSS Control Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_59_oss_mixer__1' (string)
linux.device_file = '/dev/mixer' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/mixer' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'NVidia CK804 with ALC850' (string)
oss.device_file = '/dev/mixer' (string)
oss.device_id = 'NVidia CK804' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
oss.type = 'mixer' (string)
udi = '/org/freedesktop/Hal/devices/pci_10de_59_oss_pcm_0_0'
access_control.file = '/dev/dsp' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
info.product = 'NVidia CK804 OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_59_oss_pcm_0_0' (string)
linux.device_file = '/dev/dsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/dsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'NVidia CK804 with ALC850' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/dsp' (string)
oss.device_id = 'NVidia CK804' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_10de_59_alsa_control__1'
access_control.file = '/dev/snd/controlC0' (string)
access_control.type = 'sound' (string)
alsa.card = 0 (0x0) (int)
alsa.card_id = 'NVidia CK804 with ALC850' (string)
alsa.device_file = '/dev/snd/controlC0' (string)
alsa.originating_device = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
alsa.type = 'control' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'alsa', 'access_control'} (string list)
info.category = 'alsa' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
info.product = 'NVidia CK804 with ALC850 ALSA Control Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_59_alsa_control__1' (string)
linux.device_file = '/dev/snd/controlC0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/controlC0' (string)
udi = '/org/freedesktop/Hal/devices/pci_10de_59_oss_pcm_0'
access_control.file = '/dev/audio' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
info.product = 'NVidia CK804 OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_59_oss_pcm_0' (string)
linux.device_file = '/dev/audio' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/audio' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'NVidia CK804 with ALC850' (string)
oss.device = 0 (0x0) (int)
oss.device_file = '/dev/audio' (string)
oss.device_id = 'NVidia CK804' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_10de_59_oss_pcm_1'
access_control.file = '/dev/adsp' (string)
access_control.type = 'sound' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'oss', 'access_control'} (string list)
info.category = 'oss' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
info.product = 'NVidia CK804 OSS PCM Device' (string)
info.subsystem = 'sound' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_59_oss_pcm_1' (string)
linux.device_file = '/dev/adsp' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'sound' (string)
linux.sysfs_path = '/sys/class/sound/adsp' (string)
oss.card = 0 (0x0) (int)
oss.card_id = 'NVidia CK804 with ALC850' (string)
oss.device = 1 (0x1) (int)
oss.device_file = '/dev/adsp' (string)
oss.device_id = 'NVidia CK804' (string)
oss.originating_device = '/org/freedesktop/Hal/devices/pci_10de_59' (string)
oss.type = 'pcm' (string)
udi = '/org/freedesktop/Hal/devices/pci_10de_5b'
info.linux.driver = 'ehci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 USB Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_5b' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 32 (0x20) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1' (string)
pci.product = 'CK804 USB Controller' (string)
pci.product_id = 91 (0x5b) (int)
pci.subsys_product_id = 7195 (0x1c1b) (int)
pci.subsys_vendor = 'ABIT Computer Corp.' (string)
pci.subsys_vendor_id = 5243 (0x147b) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_5b' (string)
info.product = '2.0 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 10 (0xa) (int)
usb_device.product = '2.0 root hub' (string)
usb_device.product_id = 2 (0x2) (int)
usb_device.serial = '0000:00:02.1' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1_usbraw' (string)
linux.device_file = '/dev/bus/usb/001/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev1.1' (string)
usbraw.device = '/dev/bus/usb/001/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_7d1_3c03_noserial'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1' (string)
info.product = 'DWL-G122 802.11g Adapter [ralink rt73]' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_7d1_3c03_noserial' (string)
info.vendor = 'D-Link System' (string)
linux.device_file = '/dev/bus/usb/001/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-3' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 1 (0x1) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-3' (string)
usb_device.max_power = 300 (0x12c) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'DWL-G122 802.11g Adapter [ralink rt73]' (string)
usb_device.product_id = 15363 (0x3c03) (int)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'D-Link System' (string)
usb_device.vendor_id = 2001 (0x7d1) (int)
usb_device.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_7d1_3c03_noserial_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_7d1_3c03_noserial' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_7d1_3c03_noserial_usbraw' (string)
linux.device_file = '/dev/bus/usb/001/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev1.2' (string)
usbraw.device = '/dev/bus/usb/001/002' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_7d1_3c03_noserial_if0'
info.linux.driver = 'rt73usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_7d1_3c03_noserial' (string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_7d1_3c03_noserial_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = false (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 1 (0x1) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 255 (0xff) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 255 (0xff) (int)
usb.interface.subclass = 255 (0xff) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0' (string)
usb.max_power = 300 (0x12c) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 15363 (0x3c03) (int)
usb.speed = 480.0 (480) (double)
usb.vendor = 'D-Link System' (string)
usb.vendor_id = 2001 (0x7d1) (int)
usb.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/net_00_1e_58_b0_a0_c9_0'
info.capabilities = {'net', 'net.80211control'} (string list)
info.category = 'net.80211control' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_7d1_3c03_noserial_if0' (string)
info.product = 'Networking Wireless Control Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_1e_58_b0_a0_c9_0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/wmaster0' (string)
net.address = '00:1e:58:b0:a0:c9' (string)
net.arp_proto_hw_id = 801 (0x321) (int)
net.interface = 'wmaster0' (string)
net.linux.ifindex = 3 (0x3) (int)
net.originating_device = '/org/freedesktop/Hal/devices/usb_device_7d1_3c03_noserial_if0' (string)
udi = '/org/freedesktop/Hal/devices/net_00_1e_58_b0_a0_c9'
info.capabilities = {'net', 'net.80211'} (string list)
info.category = 'net.80211' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_7d1_3c03_noserial_if0' (string)
info.product = 'WLAN Interface' (string)
info.subsystem = 'net' (string)
info.udi = '/org/freedesktop/Hal/devices/net_00_1e_58_b0_a0_c9' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'net' (string)
linux.sysfs_path = '/sys/class/net/wlan0' (string)
net.80211.mac_address = 130336989385 (0x1e58b0a0c9) (uint64)
net.address = '00:1e:58:b0:a0:c9' (string)
net.arp_proto_hw_id = 1 (0x1) (int)
net.interface = 'wlan0' (string)
net.linux.ifindex = 4 (0x4) (int)
net.originating_device = '/org/freedesktop/Hal/devices/usb_device_7d1_3c03_noserial_if0' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_2_0000_00_02_1_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-0:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 10 (0xa) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 2 (0x2) (int)
usb.serial = '0000:00:02.1' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 2.0 (2) (double)
udi = '/org/freedesktop/Hal/devices/pci_10de_5a'
info.linux.driver = 'ohci_hcd' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 USB Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_5a' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 16 (0x10) (int)
pci.device_subclass = 3 (0x3) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0' (string)
pci.product = 'CK804 USB Controller' (string)
pci.product_id = 90 (0x5a) (int)
pci.subsys_product_id = 7195 (0x1c1b) (int)
pci.subsys_vendor = 'ABIT Computer Corp.' (string)
pci.subsys_vendor_id = 5243 (0x147b) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/pci_10de_5a' (string)
info.product = '1.1 root hub' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0' (string)
info.vendor = 'Linux Foundation' (string)
linux.device_file = '/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 9 (0x9) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 518 (0x206) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 1 (0x1) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2' (string)
usb_device.max_power = 0 (0x0) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 10 (0xa) (int)
usb_device.product = '1.1 root hub' (string)
usb_device.product_id = 1 (0x1) (int)
usb_device.serial = '0000:00:02.0' (string)
usb_device.speed = 12.0 (12) (double)
usb_device.vendor = 'Linux Foundation' (string)
usb_device.vendor_id = 7531 (0x1d6b) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0_usbraw' (string)
linux.device_file = '/dev/bus/usb/002/001' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev2.1' (string)
usbraw.device = '/dev/bus/usb/002/001' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51b_noserial'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0' (string)
info.product = 'V220 Cordless Optical Mouse for Notebooks' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51b_noserial' (string)
info.vendor = 'Logitech, Inc.' (string)
linux.device_file = '/dev/bus/usb/002/003' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-6' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration = 'RR46.00_B0001' (string)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 17920 (0x4600) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 3 (0x3) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-6' (string)
usb_device.max_power = 98 (0x62) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 2 (0x2) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'V220 Cordless Optical Mouse for Notebooks' (string)
usb_device.product_id = 50459 (0xc51b) (int)
usb_device.speed = 1.5 (1.5) (double)
usb_device.vendor = 'Logitech, Inc.' (string)
usb_device.vendor_id = 1133 (0x46d) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51b_noserial_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c51b_noserial' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51b_noserial_usbraw' (string)
linux.device_file = '/dev/bus/usb/002/003' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev2.3' (string)
usbraw.device = '/dev/bus/usb/002/003' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51b_noserial_if1'
info.linux.driver = 'usbhid' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c51b_noserial' (string)
info.product = 'USB HID Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51b_noserial_if1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.1' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration = 'RR46.00_B0001' (string)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 17920 (0x4600) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 3 (0x3) (int)
usb.interface.number = 1 (0x1) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 3 (0x3) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.1' (string)
usb.max_power = 98 (0x62) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB HID Interface' (string)
usb.product_id = 50459 (0xc51b) (int)
usb.speed = 1.5 (1.5) (double)
usb.vendor = 'Logitech, Inc.' (string)
usb.vendor_id = 1133 (0x46d) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51b_noserial_if0'
info.linux.driver = 'usbhid' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_46d_c51b_noserial' (string)
info.product = 'USB HID Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_46d_c51b_noserial_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration = 'RR46.00_B0001' (string)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 17920 (0x4600) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 3 (0x3) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 2 (0x2) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 3 (0x3) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-6/2-6:1.0' (string)
usb.max_power = 98 (0x62) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB HID Interface' (string)
usb.product_id = 50459 (0xc51b) (int)
usb.speed = 1.5 (1.5) (double)
usb.vendor = 'Logitech, Inc.' (string)
usb.vendor_id = 1133 (0x46d) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_5d5_8001_noserial'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0' (string)
info.product = 'Ergomedia' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5d5_8001_noserial' (string)
info.vendor = 'Super Gate Technology Co., Ltd' (string)
linux.device_file = '/dev/bus/usb/002/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4' (string)
usb_device.bus_number = 2 (0x2) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration = 'Ergomedia' (string)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 256 (0x100) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = false (bool)
usb_device.linux.device_number = 2 (0x2) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4' (string)
usb_device.max_power = 100 (0x64) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 2 (0x2) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'Ergomedia' (string)
usb_device.product_id = 32769 (0x8001) (int)
usb_device.speed = 1.5 (1.5) (double)
usb_device.vendor = 'Super Gate Technology Co., Ltd' (string)
usb_device.vendor_id = 1493 (0x5d5) (int)
usb_device.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_5d5_8001_noserial_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5d5_8001_noserial' (string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5d5_8001_noserial_usbraw' (string)
linux.device_file = '/dev/bus/usb/002/002' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path = '/sys/class/usb_device/usbdev2.2' (string)
usbraw.device = '/dev/bus/usb/002/002' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_5d5_8001_noserial_if1'
info.linux.driver = 'usbhid' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5d5_8001_noserial' (string)
info.product = 'USB HID Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5d5_8001_noserial_if1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration = 'Ergomedia' (string)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 256 (0x100) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 3 (0x3) (int)
usb.interface.number = 1 (0x1) (int)
usb.interface.protocol = 2 (0x2) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB HID Interface' (string)
usb.product_id = 32769 (0x8001) (int)
usb.speed = 1.5 (1.5) (double)
usb.vendor = 'Super Gate Technology Co., Ltd' (string)
usb.vendor_id = 1493 (0x5d5) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_5d5_8001_noserial_if0'
info.linux.driver = 'usbhid' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_5d5_8001_noserial' (string)
info.product = 'USB HID Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_5d5_8001_noserial_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration = 'Ergomedia' (string)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 256 (0x100) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 3 (0x3) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 1 (0x1) (int)
usb.interface.subclass = 1 (0x1) (int)
usb.is_self_powered = false (bool)
usb.linux.device_number = 2 (0x2) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0' (string)
usb.max_power = 100 (0x64) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 2 (0x2) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB HID Interface' (string)
usb.product_id = 32769 (0x8001) (int)
usb.speed = 1.5 (1.5) (double)
usb.vendor = 'Super Gate Technology Co., Ltd' (string)
usb.vendor_id = 1493 (0x5d5) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0_if0'
info.linux.driver = 'hub' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0' (string)
info.product = 'USB Hub Interface' (string)
info.subsystem = 'usb' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_02_0_if0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-0:1.0' (string)
usb.bus_number = 2 (0x2) (int)
usb.can_wake_up = true (bool)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 9 (0x9) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 518 (0x206) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 9 (0x9) (int)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 0 (0x0) (int)
usb.interface.subclass = 0 (0x0) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 1 (0x1) (int)
usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.0/usb2/2-0:1.0' (string)
usb.max_power = 0 (0x0) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 10 (0xa) (int)
usb.product = 'USB Hub Interface' (string)
usb.product_id = 1 (0x1) (int)
usb.serial = '0000:00:02.0' (string)
usb.speed = 12.0 (12) (double)
usb.vendor = 'Linux Foundation' (string)
usb.vendor_id = 7531 (0x1d6b) (int)
usb.version = 1.1 (1.1) (double)
udi = '/org/freedesktop/Hal/devices/pci_10de_52'
info.linux.driver = 'nForce2_smbus' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 SMBus' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_52' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1' (string)
pci.device_class = 12 (0xc) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 5 (0x5) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.1' (string)
pci.product = 'CK804 SMBus' (string)
pci.product_id = 82 (0x52) (int)
pci.subsys_product_id = 7195 (0x1c1b) (int)
pci.subsys_vendor = 'ABIT Computer Corp.' (string)
pci.subsys_vendor_id = 5243 (0x147b) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_50'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 ISA Bridge' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_50' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string)
pci.device_class = 6 (0x6) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 1 (0x1) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string)
pci.product = 'CK804 ISA Bridge' (string)
pci.product_id = 80 (0x50) (int)
pci.subsys_product_id = 7195 (0x1c1b) (int)
pci.subsys_vendor = 'ABIT Computer Corp.' (string)
pci.subsys_vendor_id = 5243 (0x147b) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
udi = '/org/freedesktop/Hal/devices/pci_10de_5e'
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'CK804 Memory Controller' (string)
info.subsystem = 'pci' (string)
info.udi = '/org/freedesktop/Hal/devices/pci_10de_5e' (string)
info.vendor = 'nVidia Corporation' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'pci' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.device_class = 5 (0x5) (int)
pci.device_protocol = 0 (0x0) (int)
pci.device_subclass = 128 (0x80) (int)
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
pci.product = 'CK804 Memory Controller' (string)
pci.product_id = 94 (0x5e) (int)
pci.subsys_product_id = 7195 (0x1c1b) (int)
pci.subsys_vendor = 'ABIT Computer Corp.' (string)
pci.subsys_vendor_id = 5243 (0x147b) (int)
pci.vendor = 'nVidia Corporation' (string)
pci.vendor_id = 4318 (0x10de) (int)
Dumped 107 device(s) from the Global Device List.
------------------------------------------------
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/class/input/input0
U: Uniq=
H: Handlers=kbd
B: EV=3
B: KEY=10000000000000 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/class/input/input1
U: Uniq=
H: Handlers=kbd
B: EV=3
B: KEY=10000000000000 0
I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/class/input/input2
U: Uniq=
H: Handlers=kbd
B: EV=40001
B: SND=6
I: Bus=0003 Vendor=05d5 Product=8001 Version=0110
N: Name="KYE 4D device Ergomedia"
P: Phys=usb-0000:00:02.0-4/input0
S: Sysfs=/class/input/input3
U: Uniq=
H: Handlers=kbd
B: EV=120013
B: KEY=1000000000007 ff9f207ac14057ff febeffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7
I: Bus=0003 Vendor=05d5 Product=8001 Version=0110
N: Name="KYE 4D device Ergomedia"
P: Phys=usb-0000:00:02.0-4/input1
S: Sysfs=/class/input/input4
U: Uniq=
H: Handlers=kbd
B: EV=1f
B: KEY=837fff002c3027 bf00444400000000 1 f848a27c000 667bfad941dfed 9e000000000000 0
B: REL=40
B: ABS=100000000
B: MSC=10
I: Bus=0003 Vendor=046d Product=c51b Version=0111
N: Name="Logitech USB Receiver"
P: Phys=usb-0000:00:02.0-6/input0
S: Sysfs=/class/input/input5
U: Uniq=
H: Handlers=mouse0
B: EV=17
B: KEY=ff0000 0 0 0 0
B: REL=143
B: MSC=10
Reply to: