--- Begin Message ---
Package: xserver-xorg-input-synaptics
Version: 1.1.2-1
Severity: important
-------------------------------------------------------------------------
| Caveat:
I'm not sure the problem is related to xserver-xorg-input-synaptics
-------------------------------------------------------------------------
| Description of the problem:
The tapping and scrolling with the touchpad are not working since the
xserver and its related modules were updated (but it is still possible
to move the cursor or to use the mouse buttons.) Precision: It used to
work "out of the box" without any configuration from my side. (ie. no
change to /etc/X11/xorg.conf for example)
-------------------------------------------------------------------------
| Perhaps some interesting information
The following hack fixed the problem:
I installed xserver-xorg-input-synaptics version 1.1.2-1ubuntu5 from
the ubuntu repositories. Everything went back to normal immediately
after I restarted the xserver.
Just in case, I made a diff between the two Xorg.0.log (before and
after I restarted the xserver) Everything is quite identical, except
this part :
With xserver-xorg-input-synaptics version 1.1.2-1 (debian):
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
With xserver-xorg-input-synaptics version 1.1.2-1ubuntu5 (ubuntu):
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
I don't know if it's helpfull, but please ask if you need extra
precisions.
Cheers
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 2009-07-03 13:24 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1689976 2009-08-06 18:55 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8
KM266/KL266]
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1108 2009-09-19 18:34 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool,
using # values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades
*only* # if it has not been modified since the last upgrade of the
xserver-xorg # package.
#
# If you have edited this file but would like it to be automatically
updated # again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 49728 2009-09-08 09:28 /var/log/Xorg.20.log
-rw-r--r-- 1 root root 50731 2009-09-19 19:25 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.4-dsa-ia32 i686 Debian
Current Operating System: Linux amilo 2.6.26-2-686 #1 SMP Sun Jun 21
04:57:38 UTC 2009 i686 Build Date: 06 August 2009 04:49:57PM
xorg-server 2:1.6.3-1+b1 (buildd@murphy.debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 19 19:22:31 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable
AllowEmptyInput. (II) Loader magic: 0x6c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 5333:8d04:1734:1054 S3 Inc. VT8375 [ProSavage8
KM266/KL266] rev 0, Mem @ 0xe0000000/524288, 0x90000000/134217728, BIOS
@ 0x????????/65536 (II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges: [0] -1 0 0xffffffff -
0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff
(0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff
(0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff
(0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1)
IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched savage for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "savage"
(II) Loading /usr/lib/xorg/modules/drivers//savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 2.3.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) SAVAGE: driver (version 2.3.0) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
Twister PN133, Twister KN133, SuperSavage/MX 128,
SuperSavage/MX 64, SuperSavage/MX 64C, SuperSavage/IX 128,
SuperSavage/IX 128, SuperSavage/IX 64, SuperSavage/IX 64,
SuperSavage/IXC 64, SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) SAVAGE(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 16/16
(==) SAVAGE(0): Depth 16, (--) framebuffer bpp 16
(==) SAVAGE(0): RGB weight 565
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset
is 0x0000 (==) SAVAGE(0): Using XAA acceleration architecture
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(--) SAVAGE(0): Chip: id 8d04, "ProSavage DDR-K"
(--) SAVAGE(0): Engine: "ProSavageDDR"
(--) SAVAGE(0): AGP card detected
(==) SAVAGE(0): Using AGP DMA
(==) SAVAGE(0): Will try command and vertex DMA mode
(==) SAVAGE(0): Using AGP 1x mode
(==) SAVAGE(0): Using 16 MB AGP aperture
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram: 32768k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:E-EDID segment register" registered
at address 0x60. (II) SAVAGE(0): I2C device "I2C bus:ddc2" registered
at address 0xA0. (II) SAVAGE(0): Manufacturer: CPQ Model: 1366
Serial#: 1094136881 (II) SAVAGE(0): Year: 2001 Week: 16
(II) SAVAGE(0): EDID Version: 1.1
(II) SAVAGE(0): Analog Display Input, Input Voltage Level: 0.700/0.700
V (II) SAVAGE(0): Sync: Separate
(II) SAVAGE(0): Max Image Size [cm]: horiz.: 32 vert.: 24
(II) SAVAGE(0): Gamma: 2.26
(II) SAVAGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color
Display (II) SAVAGE(0): redX: 0.645 redY: 0.321 greenX: 0.285 greenY:
0.600 (II) SAVAGE(0): blueX: 0.142 blueY: 0.057 whiteX: 0.283 whiteY:
0.298 (II) SAVAGE(0): Supported established timings:
(II) SAVAGE(0): 720x400@70Hz
(II) SAVAGE(0): 640x480@60Hz
(II) SAVAGE(0): 640x480@67Hz
(II) SAVAGE(0): 640x480@72Hz
(II) SAVAGE(0): 640x480@75Hz
(II) SAVAGE(0): 800x600@60Hz
(II) SAVAGE(0): 800x600@72Hz
(II) SAVAGE(0): 800x600@75Hz
(II) SAVAGE(0): 832x624@75Hz
(II) SAVAGE(0): 1024x768@60Hz
(II) SAVAGE(0): 1024x768@70Hz
(II) SAVAGE(0): 1024x768@75Hz
(II) SAVAGE(0): Manufacturer's mask: 0
(II) SAVAGE(0): Supported standard timings:
(II) SAVAGE(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) SAVAGE(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) SAVAGE(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) SAVAGE(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) SAVAGE(0): #4: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) SAVAGE(0): Supported detailed timing:
(II) SAVAGE(0): clock: 94.5 MHz Image Size: 306 x 230 mm
(II) SAVAGE(0): h_active: 1024 h_sync: 1072 h_sync_end 1168
h_blank_end 1376 h_border: 0 (II) SAVAGE(0): v_active: 768 v_sync:
769 v_sync_end 772 v_blanking: 808 v_border: 0 (II) SAVAGE(0): Ranges:
V min: 50 V max: 160 Hz, H min: 30 H max: 70 kHz, PixClock max 110 MHz
(II) SAVAGE(0): Serial No: 116CG26KA741 (II) SAVAGE(0): Monitor name:
COMPAQ S710 (II) SAVAGE(0): EDID (in hex):
(II) SAVAGE(0): 00ffffffffffff000e11661331343741
(II) SAVAGE(0): 100b01016820187ee81269a552499924
(II) SAVAGE(0): 0e484cbdee00315945596159714f8180
(II) SAVAGE(0): 010101010101ea240060410028303060
(II) SAVAGE(0): 130032e61000001e000000fd0032a01e
(II) SAVAGE(0): 460b000a202020202020000000ff0031
(II) SAVAGE(0): 3136434732364b413734310a000000fc
(II) SAVAGE(0): 00434f4d50415120533731300a20005b
(II) SAVAGE(0): EDID vendor "CPQ", prod id 4966
(II) SAVAGE(0): Using EDID range info for horizontal sync
(II) SAVAGE(0): Using EDID range info for vertical refresh
(II) SAVAGE(0): Printing DDC gathered Modelines:
(II) SAVAGE(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376
768 769 772 808 +hsync +vsync (68.7 kHz) (II) SAVAGE(0): Modeline
"800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(37.9 kHz) (II) SAVAGE(0): Modeline "640x480"x0.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) SAVAGE(0): Modeline
"640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync
(37.9 kHz) (II) SAVAGE(0): Modeline "640x480"x0.0 30.24 640 704 768
864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) SAVAGE(0): Modeline
"640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync
(31.5 kHz) (II) SAVAGE(0): Modeline "720x400"x0.0 28.32 720 738 846
900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) SAVAGE(0): Modeline
"1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync
+vsync (60.0 kHz) (II) SAVAGE(0): Modeline "1024x768"x0.0 75.00 1024
1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II)
SAVAGE(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768
771 777 806 -hsync -vsync (48.4 kHz) (II) SAVAGE(0): Modeline
"832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(49.7 kHz) (II) SAVAGE(0): Modeline "800x600"x0.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) SAVAGE(0): Modeline
"800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(48.1 kHz) (II) SAVAGE(0): Modeline "640x480"x0.0 36.00 640 696 752
832 480 481 484 509 -hsync -vsync (43.3 kHz) (II) SAVAGE(0): Modeline
"800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync
(53.7 kHz) (II) SAVAGE(0): Modeline "1024x768"x0.0 94.50 1024 1072
1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (II) SAVAGE(0):
Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900
+hsync +vsync (67.5 kHz) (II) SAVAGE(0): Modeline "1280x1024"x0.0
108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0
kHz) (--) SAVAGE(0): Detected current MCLK value of 14.318 MHz (--)
SAVAGE(0): 1024x768 TFT LCD panel detected and active (--) SAVAGE(0): -
Limiting video mode to 1024x768 (--) SAVAGE(0): Found 13 modes at this
depth: [10e] 320 x 200, 70Hz [133] 320 x 240, 72Hz [143] 400 x 300,
72Hz [153] 512 x 384, 70Hz [11d] 640 x 400, 70Hz [111] 640 x 480, 60Hz,
75Hz, 85Hz, 100Hz, 160Hz [114] 800 x 600, 60Hz, 75Hz, 85Hz [117] 1024 x
768, 60Hz, 70Hz, 75Hz, 85Hz, 100Hz, 130Hz [17a] 1280 x 768, 60Hz [14f]
1280 x 960, 60Hz, 85Hz [11a] 1280 x 1024, 60Hz, 75Hz, 85Hz, 100Hz [13c]
1400 x 1050, 60Hz, 75Hz [122] 1600 x 1200, 60Hz (II) SAVAGE(0):
Configured Monitor: Using hsync range of 30.00-70.00 kHz (II)
SAVAGE(0): Configured Monitor: Using vrefresh range of 50.00-160.00 Hz
(II) SAVAGE(0): Configured Monitor: Using maximum pixel clock of 110.00
MHz (II) SAVAGE(0): Estimated virtual size for aspect ratio 1.3333 is
1152x864 (II) SAVAGE(0): Clock range: 10.00 to 250.00 MHz (--)
SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz. (II)
SAVAGE(0): Not using default mode "640x350" (no mode of this name) (--)
SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz. (II)
SAVAGE(0): Not using default mode "320x175" (no mode of this name) (--)
SAVAGE(0): Chose mode 11d at 70Hz. (--) SAVAGE(0): Chose mode 10e at
70Hz. (--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz.
(II) SAVAGE(0): Not using default mode "720x400" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz. (II)
SAVAGE(0): Not using default mode "360x200" (no mode of this name) (--)
SAVAGE(0): Chose mode 111 at 60Hz. (--) SAVAGE(0): Chose mode 133 at
72Hz. (--) SAVAGE(0): Chose mode 111 at 75Hz.
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(--) SAVAGE(0): Chose mode 111 at 75Hz.
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(--) SAVAGE(0): Chose mode 111 at 85Hz.
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 114 at 85Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(--) SAVAGE(0): Chose mode 117 at 70Hz.
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(--) SAVAGE(0): Chose mode 117 at 75Hz.
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "1152x864" (exceeds panel
dimensions) (--) SAVAGE(0): No suitable BIOS mode found for 576x432
75Hz. (II) SAVAGE(0): Not using default mode "576x432" (no mode of this
name) (II) SAVAGE(0): Not using default mode "1280x960" (width too
large for virtual size) (--) SAVAGE(0): Chose mode 111 at 60Hz.
(II) SAVAGE(0): Not using default mode "1280x960" (width too large for
virtual size) (--) SAVAGE(0): Chose mode 111 at 85Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (width too large for
virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 640x512
60Hz. (II) SAVAGE(0): Not using default mode "640x512" (no mode of this
name) (II) SAVAGE(0): Not using default mode "1280x1024" (width too
large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for
640x512 75Hz. (II) SAVAGE(0): Not using default mode "640x512" (no mode
of this name) (II) SAVAGE(0): Not using default mode "1280x1024" (width
too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found
for 640x512 85Hz. (II) SAVAGE(0): Not using default mode "640x512" (no
mode of this name) (II) SAVAGE(0): Not using default mode
"1600x1200" (width too large for virtual size) (--) SAVAGE(0): Chose
mode 114 at 60Hz. (II) SAVAGE(0): Not using default mode
"800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode
"1600x1200" (width too large for virtual size) (--) SAVAGE(0): Chose
mode 114 at 60Hz. (II) SAVAGE(0): Not using default mode
"800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode
"1600x1200" (width too large for virtual size) (--) SAVAGE(0): Chose
mode 114 at 75Hz. (II) SAVAGE(0): Not using default mode
"800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode
"1600x1200" (width too large for virtual size) (--) SAVAGE(0): Chose
mode 114 at 75Hz. (II) SAVAGE(0): Not using default mode
"800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode
"1600x1200" (width too large for virtual size) (--) SAVAGE(0): Chose
mode 114 at 85Hz. (II) SAVAGE(0): Not using default mode
"800x600" (hsync out of range) (II) SAVAGE(0): Not using default mode
"1792x1344" (width too large for virtual size) (--) SAVAGE(0): No
suitable BIOS mode found for 896x672 60Hz. (II) SAVAGE(0): Not using
default mode "896x672" (no mode of this name) (II) SAVAGE(0): Not using
default mode "1792x1344" (width too large for virtual size) (--)
SAVAGE(0): No suitable BIOS mode found for 896x672 75Hz. (II)
SAVAGE(0): Not using default mode "896x672" (no mode of this name) (II)
SAVAGE(0): Not using default mode "1856x1392" (width too large for
virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 928x696
60Hz. (II) SAVAGE(0): Not using default mode "928x696" (no mode of this
name) (II) SAVAGE(0): Not using default mode "1856x1392" (width too
large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for
928x696 75Hz. (II) SAVAGE(0): Not using default mode "928x696" (no mode
of this name) (II) SAVAGE(0): Not using default mode "1920x1440" (width
too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found
for 960x720 60Hz. (II) SAVAGE(0): Not using default mode "960x720" (no
mode of this name) (II) SAVAGE(0): Not using default mode
"1920x1440" (width too large for virtual size) (--) SAVAGE(0): No
suitable BIOS mode found for 960x720 75Hz. (II) SAVAGE(0): Not using
default mode "960x720" (no mode of this name) (--) SAVAGE(0): No
suitable BIOS mode found for 832x624 74Hz. (II) SAVAGE(0): Not using
default mode "832x624" (no mode of this name) (--) SAVAGE(0): No
suitable BIOS mode found for 416x312 74Hz. (II) SAVAGE(0): Not using
default mode "416x312" (no mode of this name) (II) SAVAGE(0): Not using
default mode "1152x864" (exceeds panel dimensions) (--) SAVAGE(0): No
suitable BIOS mode found for 576x432 60Hz. (II) SAVAGE(0): Not using
default mode "576x432" (no mode of this name) (II) SAVAGE(0): Not using
default mode "1152x864" (exceeds panel dimensions) (--) SAVAGE(0): No
suitable BIOS mode found for 576x432 70Hz. (II) SAVAGE(0): Not using
default mode "576x432" (no mode of this name) (II) SAVAGE(0): Not using
default mode "1152x864" (exceeds panel dimensions) (--) SAVAGE(0): No
suitable BIOS mode found for 576x432 74Hz. (II) SAVAGE(0): Not using
default mode "576x432" (no mode of this name) (II) SAVAGE(0): Not using
default mode "1152x864" (exceeds panel dimensions) (--) SAVAGE(0): No
suitable BIOS mode found for 576x432 85Hz. (II) SAVAGE(0): Not using
default mode "576x432" (no mode of this name) (II) SAVAGE(0): Not using
default mode "1152x864" (exceeds panel dimensions) (--) SAVAGE(0): No
suitable BIOS mode found for 576x432 85Hz. (II) SAVAGE(0): Not using
default mode "576x432" (no mode of this name) (II) SAVAGE(0): Not using
default mode "1152x864" (exceeds panel dimensions) (--) SAVAGE(0): No
suitable BIOS mode found for 576x432 100Hz. (II) SAVAGE(0): Not using
default mode "576x432" (no mode of this name) (II) SAVAGE(0): Not using
default mode "1360x768" (width too large for virtual size) (--)
SAVAGE(0): No suitable BIOS mode found for 680x384 59Hz. (II)
SAVAGE(0): Not using default mode "680x384" (no mode of this name) (II)
SAVAGE(0): Not using default mode "1360x768" (width too large for
virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 680x384
59Hz. (II) SAVAGE(0): Not using default mode "680x384" (no mode of this
name) (II) SAVAGE(0): Not using default mode "1400x1050" (width too
large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for
700x525 59Hz. (II) SAVAGE(0): Not using default mode "700x525" (no mode
of this name) (II) SAVAGE(0): Not using default mode "1400x1050" (width
too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found
for 700x525 70Hz. (II) SAVAGE(0): Not using default mode "700x525" (no
mode of this name) (II) SAVAGE(0): Not using default mode
"1400x1050" (width too large for virtual size) (--) SAVAGE(0): No
suitable BIOS mode found for 700x525 74Hz. (II) SAVAGE(0): Not using
default mode "700x525" (no mode of this name) (II) SAVAGE(0): Not using
default mode "1400x1050" (width too large for virtual size) (--)
SAVAGE(0): No suitable BIOS mode found for 700x525 85Hz. (II)
SAVAGE(0): Not using default mode "700x525" (no mode of this name) (II)
SAVAGE(0): Not using default mode "1440x900" (width too large for
virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 720x450
59Hz. (II) SAVAGE(0): Not using default mode "720x450" (no mode of this
name) (II) SAVAGE(0): Not using default mode "1600x1024" (width too
large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for
800x512 60Hz. (II) SAVAGE(0): Not using default mode "800x512" (no mode
of this name) (II) SAVAGE(0): Not using default mode "1680x1050" (width
too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found
for 840x525 59Hz. (II) SAVAGE(0): Not using default mode "840x525" (no
mode of this name) (II) SAVAGE(0): Not using default mode
"1680x1050" (width too large for virtual size) (--) SAVAGE(0): No
suitable BIOS mode found for 840x525 60Hz. (II) SAVAGE(0): Not using
default mode "840x525" (no mode of this name) (II) SAVAGE(0): Not using
default mode "1680x1050" (width too large for virtual size) (--)
SAVAGE(0): No suitable BIOS mode found for 840x525 69Hz. (II)
SAVAGE(0): Not using default mode "840x525" (no mode of this name) (II)
SAVAGE(0): Not using default mode "1680x1050" (width too large for
virtual size) (--) SAVAGE(0): No suitable BIOS mode found for 840x525
74Hz. (II) SAVAGE(0): Not using default mode "840x525" (no mode of this
name) (II) SAVAGE(0): Not using default mode "1680x1050" (width too
large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found for
840x525 85Hz. (II) SAVAGE(0): Not using default mode "840x525" (no mode
of this name) (II) SAVAGE(0): Not using default mode "1920x1080" (width
too large for virtual size) (--) SAVAGE(0): No suitable BIOS mode found
for 960x540 59Hz. (II) SAVAGE(0): Not using default mode "960x540" (no
mode of this name) (II) SAVAGE(0): Not using default mode
"1920x1200" (width too large for virtual size) (--) SAVAGE(0): No
suitable BIOS mode found for 960x600 59Hz. (II) SAVAGE(0): Not using
default mode "960x600" (no mode of this name) (II) SAVAGE(0): Not using
default mode "1920x1440" (width too large for virtual size) (--)
SAVAGE(0): No suitable BIOS mode found for 960x720 85Hz. (II)
SAVAGE(0): Not using default mode "960x720" (no mode of this name) (II)
SAVAGE(0): Not using default mode "2048x1536" (width too large for
virtual size) (--) SAVAGE(0): Chose mode 117 at 60Hz. (II) SAVAGE(0):
Not using default mode "1024x768" (hsync out of range) (II) SAVAGE(0):
Not using default mode "2048x1536" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 117 at 75Hz. (II) SAVAGE(0): Not using
default mode "1024x768" (hsync out of range) (II) SAVAGE(0): Not using
default mode "2048x1536" (width too large for virtual size) (--)
SAVAGE(0): Chose mode 117 at 85Hz. (II) SAVAGE(0): Not using default
mode "1024x768" (hsync out of range) (--) SAVAGE(0): Chose mode 117 at
85Hz. (--) SAVAGE(0): Chose mode 114 at 60Hz. (--) SAVAGE(0): Chose
mode 111 at 75Hz. (--) SAVAGE(0): Chose mode 111 at 75Hz. (--)
SAVAGE(0): Chose mode 111 at 60Hz. (--) SAVAGE(0): Chose mode 111 at
60Hz. (--) SAVAGE(0): No suitable BIOS mode found for 720x400 70Hz.
(II) SAVAGE(0): Not using driver mode "720x400" (no mode of this name)
(--) SAVAGE(0): Chose mode 117 at 75Hz. (--) SAVAGE(0): Chose mode 117
at 70Hz. (--) SAVAGE(0): Chose mode 117 at 60Hz. (--) SAVAGE(0): No
suitable BIOS mode found for 832x624 74Hz. (II) SAVAGE(0): Not using
driver mode "832x624" (no mode of this name) (--) SAVAGE(0): Chose mode
114 at 75Hz. (--) SAVAGE(0): Chose mode 114 at 75Hz.
(--) SAVAGE(0): Chose mode 111 at 85Hz.
(--) SAVAGE(0): Chose mode 114 at 85Hz.
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(II) SAVAGE(0): Not using driver mode "1152x864" (exceeds panel
dimensions) (II) SAVAGE(0): Not using driver mode "1280x1024" (width
too large for virtual size) (--) SAVAGE(0): Chose mode 117 at 60Hz.
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(--) SAVAGE(0): Chose mode 117 at 75Hz.
(--) SAVAGE(0): Chose mode 117 at 70Hz.
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(--) SAVAGE(0): Chose mode 117 at 75Hz.
(--) SAVAGE(0): Chose mode 117 at 70Hz.
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(--) SAVAGE(0): Chose mode 114 at 85Hz.
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 114 at 85Hz.
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 111 at 85Hz.
(--) SAVAGE(0): Chose mode 111 at 75Hz.
(--) SAVAGE(0): Chose mode 111 at 75Hz.
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(--) SAVAGE(0): Chose mode 111 at 85Hz.
(--) SAVAGE(0): Chose mode 111 at 75Hz.
(--) SAVAGE(0): Chose mode 111 at 75Hz.
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(--) SAVAGE(0): Chose mode 11d at 70Hz.
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(--) SAVAGE(0): Chose mode 10e at 70Hz.
(WW) SAVAGE(0): Shrinking virtual size estimate from 1152x864 to
1024x768 (--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024)
(**) SAVAGE(0): *Driver mode "1024x768": 56.0 MHz, 47.3 kHz, 59.9 Hz
(II) SAVAGE(0): Modeline "1024x768"x59.9 56.00 1024 1072 1104 1184
768 771 775 790 +hsync -vsync (47.3 kHz) (**) SAVAGE(0): *Driver mode
"1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) SAVAGE(0): Modeline
"1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync
+vsync (68.7 kHz) (**) SAVAGE(0): *Driver mode "1024x768": 94.5 MHz,
68.7 kHz, 85.0 Hz (II) SAVAGE(0): Modeline "1024x768"x85.0 94.50
1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) (**)
SAVAGE(0): *Driver mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz (II)
SAVAGE(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768
769 772 800 +hsync +vsync (60.0 kHz) (**) SAVAGE(0): *Driver mode
"1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) SAVAGE(0): Modeline
"1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync
-vsync (56.5 kHz) (**) SAVAGE(0): *Driver mode "1024x768": 65.0 MHz,
48.4 kHz, 60.0 Hz (II) SAVAGE(0): Modeline "1024x768"x60.0 65.00
1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (**)
SAVAGE(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II)
SAVAGE(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768
769 772 808 +hsync +vsync (68.7 kHz) (**) SAVAGE(0): *Default mode
"1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz (II) SAVAGE(0): Modeline
"1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync
+vsync (60.0 kHz) (**) SAVAGE(0): *Default mode "1024x768": 75.0 MHz,
56.5 kHz, 70.1 Hz (II) SAVAGE(0): Modeline "1024x768"x70.1 75.00
1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (**)
SAVAGE(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II)
SAVAGE(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768
771 777 806 -hsync -vsync (48.4 kHz) (**) SAVAGE(0): *Default mode
"1024x768": 44.9 MHz, 35.5 kHz, 86.9 Hz (I) (II) SAVAGE(0): Modeline
"1024x768"x86.9 44.90 1024 1032 1208 1264 768 768 776 817 interlace
+hsync +vsync (35.5 kHz) (**) SAVAGE(0): *Driver mode "800x600": 56.2
MHz, 53.7 kHz, 85.1 Hz (II) SAVAGE(0): Modeline "800x600"x85.1 56.25
800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) (**)
SAVAGE(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II)
SAVAGE(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601
604 625 +hsync +vsync (46.9 kHz) (**) SAVAGE(0): *Driver mode
"800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) SAVAGE(0): Modeline
"800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(48.1 kHz) (**) SAVAGE(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz,
60.3 Hz (II) SAVAGE(0): Modeline "800x600"x60.3 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) SAVAGE(0): *Default
mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) SAVAGE(0): Modeline
"800x600"x85.1 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(53.7 kHz) (**) SAVAGE(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz,
75.0 Hz (II) SAVAGE(0): Modeline "800x600"x75.0 49.50 800 816 896
1056 600 601 604 625 +hsync +vsync (46.9 kHz) (**) SAVAGE(0): *Default
mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) SAVAGE(0): Modeline
"800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(48.1 kHz) (**) SAVAGE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz,
60.3 Hz (II) SAVAGE(0): Modeline "800x600"x60.3 40.00 800 840 968
1056 600 601 605 628 +hsync +vsync (37.9 kHz) (**) SAVAGE(0): *Default
mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) SAVAGE(0): Modeline
"800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(35.2 kHz) (**) SAVAGE(0): *Driver mode "640x480": 36.0 MHz, 43.3 kHz,
85.0 Hz (II) SAVAGE(0): Modeline "640x480"x85.0 36.00 640 696 752
832 480 481 484 509 -hsync -vsync (43.3 kHz) (**) SAVAGE(0): *Driver
mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) SAVAGE(0): Modeline
"640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(37.5 kHz) (**) SAVAGE(0): *Driver mode "640x480": 31.5 MHz, 37.9 kHz,
72.8 Hz (II) SAVAGE(0): Modeline "640x480"x72.8 31.50 640 664 704
832 480 489 492 520 -hsync -vsync (37.9 kHz) (**) SAVAGE(0): *Driver
mode "640x480": 30.2 MHz, 35.0 kHz, 66.7 Hz (II) SAVAGE(0): Modeline
"640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync
(35.0 kHz) (**) SAVAGE(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz,
59.9 Hz (II) SAVAGE(0): Modeline "640x480"x59.9 25.18 640 656 752
800 480 490 492 525 -hsync -vsync (31.5 kHz) (**) SAVAGE(0): *Default
mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) SAVAGE(0): Modeline
"640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync
(43.3 kHz) (**) SAVAGE(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz,
75.0 Hz (II) SAVAGE(0): Modeline "640x480"x75.0 31.50 640 656 720
840 480 481 484 500 -hsync -vsync (37.5 kHz) (**) SAVAGE(0): *Default
mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) SAVAGE(0): Modeline
"640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync
(37.9 kHz) (**) SAVAGE(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz,
60.0 Hz (D) (II) SAVAGE(0): Modeline "640x480"x60.0 54.00 640 688
744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz) (**)
SAVAGE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz (II)
SAVAGE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490
492 525 -hsync -vsync (31.5 kHz) (**) SAVAGE(0): *Default mode
"640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) SAVAGE(0): Modeline
"640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync
(37.9 kHz) (**) SAVAGE(0): *Default mode "512x384": 47.2 MHz, 68.7 kHz,
85.0 Hz (D) (II) SAVAGE(0): Modeline "512x384"x85.0 47.25 512 536
584 688 384 384 386 404 doublescan +hsync +vsync (68.7 kHz) (**)
SAVAGE(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
(II) SAVAGE(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384
384 386 400 doublescan +hsync +vsync (60.0 kHz) (**) SAVAGE(0):
*Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D) (II)
SAVAGE(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385
388 403 doublescan -hsync -vsync (56.5 kHz) (**) SAVAGE(0): *Default
mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) (II) SAVAGE(0):
Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403
doublescan -hsync -vsync (48.4 kHz) (**) SAVAGE(0): *Default mode
"512x384": 22.4 MHz, 35.5 kHz, 86.6 Hz (D) (II) SAVAGE(0): Modeline
"512x384"x86.6 22.45 512 516 604 632 384 384 388 409 interlace
doublescan +hsync +vsync (35.5 kHz) (**) SAVAGE(0): *Default mode
"400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D) (II) SAVAGE(0): Modeline
"400x300"x85.3 28.15 400 416 448 524 300 300 302 315 doublescan
+hsync +vsync (53.7 kHz) (**) SAVAGE(0): *Default mode "400x300": 24.8
MHz, 46.9 kHz, 75.1 Hz (D) (II) SAVAGE(0): Modeline "400x300"x75.1
24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9
kHz) (**) SAVAGE(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2
Hz (D) (II) SAVAGE(0): Modeline "400x300"x72.2 25.00 400 428 488
520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz) (**)
SAVAGE(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300
300 302 314 doublescan +hsync +vsync (37.9 kHz) (**) SAVAGE(0):
*Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) (II)
SAVAGE(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300
301 312 doublescan +hsync +vsync (35.2 kHz) (**) SAVAGE(0): *Default
mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D) (II) SAVAGE(0):
Modeline "320x240"x85.2 18.00 320 348 376 416 240 240 242 254
doublescan -hsync -vsync (43.3 kHz) (**) SAVAGE(0): *Default mode
"320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D) (II) SAVAGE(0): Modeline
"320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan
-hsync -vsync (37.5 kHz) (**) SAVAGE(0): *Default mode "320x240": 15.8
MHz, 37.9 kHz, 72.8 Hz (D) (II) SAVAGE(0): Modeline "320x240"x72.8
15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9
kHz) (**) SAVAGE(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1
Hz (D) (II) SAVAGE(0): Modeline "320x240"x60.1 12.59 320 328 376
400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz) (**)
SAVAGE(0): *Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) SAVAGE(0): Modeline "320x200"x85.3 15.75 320 336 368 416 200
200 202 222 doublescan -hsync +vsync (37.9 kHz) (**) SAVAGE(0): Display
dimensions: (320, 240) mm (**) SAVAGE(0): DPI set to (81, 81) (II)
Loading sub module "fb" (II) LoadModule: "fb" (II)
Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org
Foundation" compiled for 1.6.3, module version = 1.0.0 ABI class: X.Org
ANSI C Emulation, version 0.4 (II) Loading sub module "xaa" (II)
LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II)
Module xaa: vendor="X.Org Foundation" compiled for 1.6.3, module
version = 1.2.1 ABI class: X.Org Video Driver, version 5.0 (II) Loading
sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac"
already built-in (II) do I need RAC? No, I don't. (II) resource ranges
after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1)
MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3]
-1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0
0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0
0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0
0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1
0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0
0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 -
0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 -
0x000003df (0x20) IS[B](OprU) (II) Loading sub module "int10" (II)
LoadModule: "int10" (II) Reloading /usr/lib/xorg/modules//libint10.so
(II) SAVAGE(0): initializing int10 (II) SAVAGE(0): Primary V_BIOS
segment is: 0xc000 (II) SAVAGE(0): VESA BIOS detected (II) SAVAGE(0):
VESA VBE Version 3.0 (II) SAVAGE(0): VESA VBE Total Mem: 31680 kB (II)
SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS (II)
SAVAGE(0): VESA VBE OEM Software Rev: 2.0 (II) SAVAGE(0): VESA VBE OEM
Vendor: S3 Garphics Incorporated. (II) SAVAGE(0): VESA VBE OEM Product:
VBE 3.0 (II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0 (II)
SAVAGE(0): 4740 kB of Videoram needed for 3D; 32768 kB of Videoram
available (II) SAVAGE(0): Sufficient Videoram available for 3D (II)
SAVAGE(0): [drm] bpp: 16 depth: 16 (II) SAVAGE(0): [drm] Sarea
2200+284: 2484 drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0 drmOpenByBusid: Searching
for BusID pci:0000:01:00.0 drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name
is /dev/dri/card1 drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card2 drmOpenByBusid: drmOpenMinor
returns -1 drmOpenDevice: node name is /dev/dri/card3 drmOpenByBusid:
drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card4
drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name
is /dev/dri/card5 drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card6 drmOpenByBusid: drmOpenMinor
returns -1 drmOpenDevice: node name is /dev/dri/card7 drmOpenByBusid:
drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card8
drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name
is /dev/dri/card9 drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card10 drmOpenByBusid:
drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card11
drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name
is /dev/dri/card12 drmOpenByBusid: drmOpenMinor returns -1
drmOpenDevice: node name is /dev/dri/card13 drmOpenByBusid:
drmOpenMinor returns -1 drmOpenDevice: node name is /dev/dri/card14
drmOpenByBusid: drmOpenMinor returns -1 drmOpenDevice: node name
is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenDevice:
node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK)
drmGetBusid returned '' (II) [drm] loaded kernel module for "savage"
driver. (II) [drm] DRM interface version 1.3 (II) [drm] DRM open master
succeeded. (II) SAVAGE(0): [drm] Using the DRM lock SAREA also for
drawables. (II) SAVAGE(0): [drm] framebuffer handle = 0x90000000 (II)
SAVAGE(0): [drm] added 1 reserved context for kernel (II) SAVAGE(0): X
context handle = 0x1 (II) SAVAGE(0): [drm] installed DRM signal handler
(II) SAVAGE(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x3156; Card
0x5333/0x8d04] (II) SAVAGE(0): [agp] 16384 kB allocated with handle
0x00000001 (II) SAVAGE(0): [agp] command DMA handle = 0xa0000000
(II) SAVAGE(0): [agp] agpTextures handle = 0xa0100000
(II) SAVAGE(0): [drm] aperture handle = 0x92000000
(II) SAVAGE(0): [drm] Enabling ShadowStatus for DRI.
(II) SAVAGE(0): [drm] Status handle = 0x22370000
(II) SAVAGE(0): [drm] Status page mapped at 0xb083e000
(II) SAVAGE(0): [dri] visual configs initialized
(**) SAVAGE(0): DRI is enabled
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(II) SAVAGE(0): virtualX:1024,virtualY:768
(II) SAVAGE(0): bpp:16,tiledwidthBytes:2048,tiledBufferSize:1572864
(II) SAVAGE(0): bpp:16,widthBytes:2048,BufferSize:1572864
(II) SAVAGE(0): videoRambytes:0x02000000
(II) SAVAGE(0): textureSize:0x0195f000
(II) SAVAGE(0): textureSize:0x0195f000
(II) SAVAGE(0): textureOffset:0x00680000
(II) SAVAGE(0): depthOffset:0x00500000,depthPitch:2048
(II) SAVAGE(0): backOffset:0x00380000,backPitch:2048
(II) SAVAGE(0): Reserved back buffer at offset 0x380000
(II) SAVAGE(0): Reserved depth buffer at offset 0x500000
(II) SAVAGE(0): Reserved 25980 kb for textures at offset 0x680000
(II) SAVAGE(0): Using 1023 lines for offscreen memory.
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Image Writes
Setting up tile and stipple cache:
28 128x128 slots
7 256x256 slots
(==) SAVAGE(0): Backing store disabled
(II) SAVAGE(0): DPMS enabled
(II) SAVAGE(0): [DRI] installation complete
(II) SAVAGE(0): [junkers]pSAVAGEDRIServer:
(II) SAVAGE(0): [junkers] reserved_map_agpstart:0x00000000
(II) SAVAGE(0): [junkers] reserved_map_idx:0x00000000
(II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000000
(II) SAVAGE(0): [junkers] chipset:0x00000000
(II) SAVAGE(0): [junkers] sgram:0x00000000
(II) SAVAGE(0): [junkers] frontbufferSize:0x00180000
(II) SAVAGE(0): [junkers] frontOffset:0x00000000
(II) SAVAGE(0): [junkers] frontPitch:0x00000800
(II) SAVAGE(0): [junkers] backbufferSize:0x00180000
(II) SAVAGE(0): [junkers] backOffset:0x00380000
(II) SAVAGE(0): [junkers] backPitch:0x00000800
(II) SAVAGE(0): [junkers] depthbufferSize:0x00180000
(II) SAVAGE(0): [junkers] depthOffset:0x00500000
(II) SAVAGE(0): [junkers] depthPitch:0x00000800
(II) SAVAGE(0): [junkers] textureOffset:0x00680000
(II) SAVAGE(0): [junkers] textureSize:0x0195f000
(II) SAVAGE(0): [junkers] textureSize:0x0195f000
(II) SAVAGE(0): [junkers] logTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers] agp:handle:0x00000001
(II) SAVAGE(0): [junkers] agp:offset:0x01000000
(II) SAVAGE(0): [junkers] agp:size:0x01000000
(II) SAVAGE(0): [junkers] agp:map:0x00000000
(II) SAVAGE(0): [junkers] registers:handle:0xe0000000
(II) SAVAGE(0): [junkers] registers:offset:0x00000000
(II) SAVAGE(0): [junkers] registers:size:0x00080000
(II) SAVAGE(0): [junkers] registers:map:0x00000000
(II) SAVAGE(0): [junkers] status:handle:0x22370000
(II) SAVAGE(0): [junkers] status:offset:0x00000000
(II) SAVAGE(0): [junkers] status:size:0x00001000
(II) SAVAGE(0): [junkers] status:map:0xb083e000
(II) SAVAGE(0): [junkers] agpTextures:handle:0xa0100000
(II) SAVAGE(0): [junkers] agpTextures:offset:0x00100000
(II) SAVAGE(0): [junkers] agpTextures:size:0x00f00000
(II) SAVAGE(0): [junkers] apgTextures:map:0x00000000
(II) SAVAGE(0): [junkers] logAgpTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers] cmdDma:handle:0xa0000000
(II) SAVAGE(0): [junkers] cmdDma:offset:0x00000000
(II) SAVAGE(0): [junkers] cmdDma:size:0x00100000
(II) SAVAGE(0): [junkers] cmdDma:map:0x00000000
(II) SAVAGE(0): [junkers]pSAVAGEDRI:
(II) SAVAGE(0): [junkers] chipset:0x00000006
(II) SAVAGE(0): [junkers] width:0x00000400
(II) SAVAGE(0): [junkers] height:0x00000300
(II) SAVAGE(0): [junkers] mem:0x02000000
(II) SAVAGE(0): [junkers] cpp:2
(II) SAVAGE(0): [junkers] zpp:2
(II) SAVAGE(0): [junkers] agpMode:1
(II) SAVAGE(0): [junkers] bufferSize:65536
(II) SAVAGE(0): [junkers] frontbufferSize:0x00180000
(II) SAVAGE(0): [junkers] frontOffset:0x00000000
(II) SAVAGE(0): [junkers] backbufferSize:0x00180000
(II) SAVAGE(0): [junkers] backOffset:0x00380000
(II) SAVAGE(0): [junkers] depthbufferSize:0x00180000
(II) SAVAGE(0): [junkers] depthOffset:0x00500000
(II) SAVAGE(0): [junkers] textureOffset:0x00680000
(II) SAVAGE(0): [junkers] textureSize:0x01800000
(II) SAVAGE(0): [junkers] logTextureGranularity:0x00000015
(II) SAVAGE(0): [junkers] agpTextureHandle:0xa0100000
(II) SAVAGE(0): [junkers] agpTextureSize:0x00f00000
(II) SAVAGE(0): [junkers] logAgpTextureGranularity:0x00000014
(II) SAVAGE(0): [junkers] apertureHandle:0x92000000
(II) SAVAGE(0): [junkers] apertureSize:0x05000000
(II) SAVAGE(0): [junkers] aperturePitch:0x00001000
(II) SAVAGE(0): [junkers] statusHandle:0x22370000
(II) SAVAGE(0): [junkers] statusSize:0x00001000
(II) SAVAGE(0): [junkers] sarea_priv_offset:0x00000898
(II) SAVAGE(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: Loaded and initialized /usr/lib/dri/savage_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) config/hal: Adding input device Sleep Button (CM)
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Sleep Button (CM): always reports core events
(**) Sleep Button (CM): Device: "/dev/input/event3"
(II) Sleep Button (CM): Found keys
(II) Sleep Button (CM): Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button (CM)" (type:
KEYBOARD) (**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Power Button (FF)
(**) Power Button (FF): always reports core events
(**) Power Button (FF): Device: "/dev/input/event2"
(II) Power Button (FF): Found keys
(II) Power Button (FF): Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button (FF)" (type:
KEYBOARD) (**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2
keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event1"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double
triple (--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics
TouchPad" (type: TOUCHPAD) (**) SynPS/2 Synaptics TouchPad: (accel)
keeping acceleration scheme 1 (**) SynPS/2 Synaptics TouchPad: (accel)
filter chain progression: 2.00 (**) SynPS/2 Synaptics TouchPad: (accel)
filter stage 0: 20.00 ms (**) SynPS/2 Synaptics TouchPad: (accel) set
acceleration profile 0 (--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Genius NetScroll + Mini Traveler
(**) Genius NetScroll + Mini Traveler: always reports core events
(**) Genius NetScroll + Mini Traveler: Device: "/dev/input/event5"
(II) Genius NetScroll + Mini Traveler: Found 3 mouse buttons
(II) Genius NetScroll + Mini Traveler: Found x and y relative axes
(II) Genius NetScroll + Mini Traveler: Found scroll wheel(s)
(II) Genius NetScroll + Mini Traveler: Configuring as mouse
(**) Genius NetScroll + Mini Traveler: YAxisMapping: buttons 4 and 5
(**) Genius NetScroll + Mini Traveler: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding
extended input device "Genius NetScroll + Mini Traveler" (type: MOUSE)
(**) Genius NetScroll + Mini Traveler: (accel) keeping acceleration
scheme 1 (**) Genius NetScroll + Mini Traveler: (accel) filter chain
progression: 2.00 (**) Genius NetScroll + Mini Traveler: (accel) filter
stage 0: 20.00 ms (**) Genius NetScroll + Mini Traveler: (accel) set
acceleration profile 0 (II) Genius NetScroll + Mini Traveler:
initialized for relative axes.
HAL Information (lshal):
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
button.has_state = false (bool)
button.type = 'power' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'button', 'input.keys'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Power Button (FF)' (string)
info.subsystem = 'input' (string)
info.udi =
'/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
input.device = '/dev/input/event2' (string) input.product = 'Power
Button (FF)' (string) input.x11_driver = 'evdev' (string)
input.xkb.layout = 'fr' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = 'latin9' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input2/event2' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_0'
button.has_state = false (bool)
button.type = 'sleep' (string)
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'button', 'input.keys'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Sleep Button (CM)' (string)
info.subsystem = 'input' (string)
info.udi =
'/org/freedesktop/Hal/devices/computer_logicaldev_input_0' (string)
input.device = '/dev/input/event3' (string) input.product = 'Sleep
Button (CM)' (string) input.x11_driver = 'evdev' (string)
input.xkb.layout = 'fr' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'base' (string)
input.xkb.variant = 'latin9' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input3/event3' (string)
udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
info.capabilities = {'input', 'input.touchpad'} (string list)
info.category = 'input' (string) info.parent =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
info.product = 'SynPS/2 Synaptics TouchPad' (string) info.subsystem =
'input' (string) info.udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string)
input.device = '/dev/input/event1' (string) input.originating_device =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
input.product = 'SynPS/2 Synaptics TouchPad' (string) input.x11_driver
= 'synaptics' (string) linux.device_file =
'/dev/input/event1' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input1/event1' (string)
udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad',
'input.keys', 'button'} (string list) info.category = 'input' (string)
info.parent =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
info.product = 'AT Translated Set 2 keyboard' (string) info.subsystem
= 'input' (string) info.udi =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string)
input.device = '/dev/input/event0' (string) input.originating_device =
'/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.product = 'AT Translated Set 2 keyboard' (string)
input.x11_driver = 'evdev' (string) input.xkb.layout = 'fr' (string)
input.xkb.model = 'pc105' (string) input.xkb.options =
'lv3:ralt_switch' (string) input.xkb.rules = 'base' (string)
input.xkb.variant = 'latin9' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input0/event0' (string)
udi =
'/org/freedesktop/Hal/devices/usb_device_458_36_noserial_if0_logicaldev_input'
access_control.file = '/dev/input/event5' (string) access_control.type
= 'mouse' (string) info.callouts.add = {'hal-acl-tool --add-device'}
(string list) info.callouts.remove = {'hal-acl-tool --remove-device'}
(string list) info.capabilities = {'input', 'input.mouse',
'access_control'} (string list) info.category = 'input' (string)
info.parent =
'/org/freedesktop/Hal/devices/usb_device_458_36_noserial_if0' (string)
info.product = 'Genius NetScroll + Mini Traveler' (string)
info.subsystem = 'input' (string) info.udi =
'/org/freedesktop/Hal/devices/usb_device_458_36_noserial_if0_logicaldev_input' (string)
input.device = '/dev/input/event5' (string) input.originating_device =
'/org/freedesktop/Hal/devices/usb_device_458_36_noserial_if0' (string)
input.product = 'Genius NetScroll + Mini Traveler' (string)
input.x11_driver = 'evdev' (string) linux.device_file =
'/dev/input/event5' (string) linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/class/input/input5/event5' (string)
DRM Information from dmesg:
[ 1.732122] Linux agpgart interface v0.103
[ 1.733205] agpgart: Detected VIA Apollo Pro266 chipset
[ 1.738691] agpgart: AGP aperture is 64M @ 0xa0000000
[ 39.556486] [drm] Initialized drm 1.1.0 20060810
[ 39.716028] [drm] Initialized savage 2.4.1 20050313 on minor 0
[ 39.791815] agpgart: Found an AGP 2.0 compliant device at
0000:00:00.0. [ 39.791864] agpgart: Putting AGP V2 device at
0000:00:00.0 into 0x mode [ 39.791946] agpgart: Putting AGP V2 device
at 0000:01:00.0 into 0x mode
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (900, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages xserver-xorg-input-synaptics depends on:
ii libc6 2.9-25 GNU C Library: Shared
libraries ii libx11-6 2:1.2.2-1 X11 client-side
library ii libxi6 2:1.2.1-2 X11 Input
extension library ii xserver-xorg-core 2:1.6.3-1+b1 Xorg X
server - core server
xserver-xorg-input-synaptics recommends no packages.
Versions of packages xserver-xorg-input-synaptics suggests:
ii gpointing-device-settings 1.3.1-3 configuration tool for
pointing de pn touchfreeze <none> (no
description available)
-- no debconf information
--- End Message ---