Bug#546655: xserver-xorg-video-radeon: [dri] DRIScreenInit failed
Sure, please find it in attached. For your convenience, I've also extracted the DRM-related info below:
[ 24.899286] [drm] Initialized drm 1.1.0 20060810
[ 24.911897] [drm:drm_init]
[ 24.911975] [drm:drm_get_dev]
[ 24.912243] [drm:drm_get_minor]
[ 24.912367] [drm:drm_get_minor] new minor assigned 0
[ 24.912540] [drm:drm_addmap_core] offset = 0xd8030000, size = 0x00010000, type = 1
[ 24.912549] [drm:radeon_driver_load] AGP card detected
[ 24.912554] [drm] Initialized radeon 1.30.0 20080528 for 0000:80:00.0 on minor 0
[ 24.920084] [drm:drm_stub_open]
[ 24.920089] [drm:drm_open_helper] pid = 2449, minor = 0
[ 24.920093] [drm:radeon_driver_open]
[ 24.920098] [drm:drm_addmap_core] offset = 0x00000000, size = 0x00010000, type = 2
[ 24.920126] [drm:drm_addmap_core] 65536 16 a000000202dd8000
[ 24.920131] [drm:drm_addmap_core] offset = 0xd0000000, size = 0x08000000, type = 0
[ 24.920136] [drm:drm_setup]
[ 24.920194] [drm:drm_ioctl] pid=2449, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[ 24.920207] [drm:drm_ioctl] pid=2449, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1
[ 24.920217] [drm:drm_ioctl] pid=2449, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1
[ 24.920255] [drm:drm_ioctl] pid=2449, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[ 24.920262] [drm:drm_ioctl] pid=2449, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[ 24.920352] [drm:drm_release] open_count = 1
[ 24.920357] [drm:drm_release] pid = 2449, device = 0xe200, open_count = 1
[ 24.920368] [drm:drm_lastclose]
[ 24.920373] [drm:radeon_do_cleanup_cp]
[ 24.920376] [drm:drm_lastclose] driver lastclose completed
[ 24.920382] [drm:drm_lastclose] lastclose completed
[ 25.232618] [drm:drm_stub_open]
[ 25.232622] [drm:drm_open_helper] pid = 2449, minor = 0
[ 25.232625] [drm:radeon_driver_open]
[ 25.232630] [drm:drm_addmap_core] offset = 0x00000000, size = 0x00010000, type = 2
[ 25.232658] [drm:drm_addmap_core] 65536 16 a000000202df0000
[ 25.232663] [drm:drm_addmap_core] offset = 0xd0000000, size = 0x08000000, type = 0
[ 25.232667] [drm:drm_setup]
[ 25.232686] [drm:drm_ioctl] pid=2449, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[ 25.232692] [drm:drm_ioctl] pid=2449, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[ 25.232701] [drm:drm_release] open_count = 1
[ 25.232705] [drm:drm_release] pid = 2449, device = 0xe200, open_count = 1
[ 25.232712] [drm:drm_lastclose]
[ 25.232716] [drm:radeon_do_cleanup_cp]
[ 25.232719] [drm:drm_lastclose] driver lastclose completed
[ 25.232722] [drm:drm_lastclose] lastclose completed
[ 25.232756] [drm:drm_stub_open]
[ 25.232760] [drm:drm_open_helper] pid = 2449, minor = 0
[ 25.232763] [drm:radeon_driver_open]
[ 25.232767] [drm:drm_addmap_core] offset = 0x00000000, size = 0x00010000, type = 2
[ 25.232792] [drm:drm_addmap_core] 65536 16 a000000202e08000
[ 25.232797] [drm:drm_addmap_core] offset = 0xd0000000, size = 0x08000000, type = 0
[ 25.232801] [drm:drm_setup]
[ 25.232815] [drm:drm_ioctl] pid=2449, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[ 25.232821] [drm:drm_ioctl] pid=2449, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[ 25.232828] [drm:drm_release] open_count = 1
[ 25.232831] [drm:drm_release] pid = 2449, device = 0xe200, open_count = 1
[ 25.232838] [drm:drm_lastclose]
[ 25.232842] [drm:radeon_do_cleanup_cp]
[ 25.232844] [drm:drm_lastclose] driver lastclose completed
[ 25.232848] [drm:drm_lastclose] lastclose completed
[ 25.232875] [drm:drm_stub_open]
[ 25.232878] [drm:drm_open_helper] pid = 2449, minor = 0
[ 25.232881] [drm:radeon_driver_open]
[ 25.232886] [drm:drm_addmap_core] offset = 0x00000000, size = 0x00010000, type = 2
[ 25.232910] [drm:drm_addmap_core] 65536 16 a000000202e20000
[ 25.232914] [drm:drm_addmap_core] offset = 0xd0000000, size = 0x08000000, type = 0
[ 25.232919] [drm:drm_setup]
[ 25.232940] [drm:drm_ioctl] pid=2449, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[ 25.232947] [drm:drm_ioctl] pid=2449, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1
[ 25.232953] [drm:drm_ioctl] pid=2449, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1
[ 25.232970] [drm:drm_ioctl] pid=2449, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[ 25.232987] [drm:drm_ioctl] pid=2449, cmd=0xc0286415, nr=0x15, dev 0xe200, auth=1
[ 25.232992] [drm:drm_addmap_core] offset = 0x00000000, size = 0x00010000, type = 2
[ 25.233009] [drm:drm_mmap_locked] start = 0x200000000d400000, end = 0x200000000d410000, page offset = 0x3d88
[ 25.233013] [drm:drm_mmap_locked] *ERROR* Could not find map
[ 25.233037] [drm:drm_ioctl] pid=2449, cmd=0x4028641b, nr=0x1b, dev 0xe200, auth=1
[ 25.233041] [drm:drm_ioctl] ret = ffffffea
[ 25.233054] [drm:drm_release] open_count = 1
[ 25.233057] [drm:drm_release] pid = 2449, device = 0xe200, open_count = 1
[ 25.233064] [drm:drm_lastclose]
[ 25.233068] [drm:radeon_do_cleanup_cp]
[ 25.233071] [drm:drm_lastclose] driver lastclose completed
[ 25.233074] [drm:drm_lastclose] lastclose completed
Thanks,
Émeric
2009/9/15 Julien Cristau
<jcristau@debian.org>
On Mon, Sep 14, 2009 at 23:11:55 +0200, Émeric Maschino wrote:
> Today Debian Squeeze's updates bring X.org 7.5 with all the promises of the
> libpci rework and X Server 1.6 that should solve a very old bug preventing
> DRI from working correctly on Itanium workstations (see
> http://bugs.freedesktop.org/show_bug.cgi?id=7770 for details). There was
> hope some month ago in Unstable with X Server 1.6 RC2 and Mesa 7.3.1 (see
> comments #38 and followings if interested), but it seems that DRI on Itanium
> is broken again :-(
>
Can you set the drm.debug kernel parameter to 1, and attach dmesg?
Thanks,
Julien
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-1-mckinley (Debian 2.6.30-6) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-1+b1) ) #1 SMP Sat Aug 15 22:15:55 UTC 2009
[ 0.000000] EFI v1.10 by HP: SALsystab=0x3fb38000 ACPI 2.0=0x3fb2e000 SMBIOS=0x3fb3a000 HCDP=0x3fb2c000
[ 0.000000] booting generic kernel on platform hpzx1
[ 0.000000] PCDP: v0 at 0x3fb2c000
[ 0.000000] ACPI: RSDP 000000003fb2e000 00028 (v02 HP)
[ 0.000000] ACPI: XSDT 000000003fb2e02c 00094 (v01 HP zx6000 00000000 HP 00000000)
[ 0.000000] ACPI: FACP 000000003fb36800 000F4 (v03 HP zx6000 00000000 HP 00000000)
[ 0.000000] ACPI Warning (tbfadt-0531): 32/64X length mismatch in Gpe0Block: 32/16 [20090320]
[ 0.000000] ACPI Warning (tbfadt-0531): 32/64X length mismatch in Gpe1Block: 32/16 [20090320]
[ 0.000000] ACPI: DSDT 000000003fb2e0e0 05781 (v01 HP zx6000 00000007 INTL 02012044)
[ 0.000000] ACPI: FACS 000000003fb368f8 00040
[ 0.000000] ACPI: SPCR 000000003fb36938 00050 (v01 HP zx6000 00000000 HP 00000000)
[ 0.000000] ACPI: DBGP 000000003fb36988 00034 (v01 HP zx6000 00000000 HP 00000000)
[ 0.000000] ACPI: APIC 000000003fb36a48 000B0 (v01 HP zx6000 00000000 HP 00000000)
[ 0.000000] ACPI: SPMI 000000003fb369c0 00050 (v04 HP zx6000 00000000 HP 00000000)
[ 0.000000] ACPI: CPEP 000000003fb36a10 00034 (v01 HP zx6000 00000000 HP 00000000)
[ 0.000000] ACPI: SSDT 000000003fb33870 001D6 (v01 HP zx6000 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb33a50 00342 (v01 HP zx6000 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb33da0 00A16 (v01 HP zx6000 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb347c0 00A16 (v01 HP zx6000 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb351e0 00A16 (v01 HP zx6000 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb35c00 00A16 (v01 HP zx6000 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb36620 000EB (v01 HP zx6000 00000006 INTL 02012044)
[ 0.000000] ACPI: SSDT 000000003fb36710 000EF (v01 HP zx6000 00000006 INTL 02012044)
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] Initial ramdisk at: 0xe0000040fe394000 (12581475 bytes)
[ 0.000000] SAL 3.1: HP version 2.31
[ 0.000000] SAL Platform features: None
[ 0.000000] SAL: AP wakeup using external interrupt vector 0xff
[ 0.000000] ACPI: Local APIC address c0000000fee00000
[ 0.000000] GSI 36 (level, low) -> CPU 0 (0x0000) vector 48
[ 0.000000] 2 CPUs available, 2 CPUs total
[ 0.000000] MCA related initialization done
[ 0.000000] Virtual mem_map starts at 0xa0007fffc7200000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000400 -> 0x00040000
[ 0.000000] Normal 0x00040000 -> 0x01040000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000400 -> 0x0000fd79
[ 0.000000] 0: 0x0000fec0 -> 0x0000fecb
[ 0.000000] 0: 0x00040000 -> 0x00060000
[ 0.000000] 0: 0x01010000 -> 0x0103ff5a
[ 0.000000] 0: 0x0103ff69 -> 0x0103ff84
[ 0.000000] 0: 0x0103ffa0 -> 0x0103fff0
[ 0.000000] On node 0 totalpages: 391497
[ 0.000000] free_area_init_node: node 0, pgdat e000000001300000, node_mem_map a0007fffc720e000
[ 0.000000] DMA zone: 893 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 62983 pages, LIFO batch:7
[ 0.000000] Normal zone: 57344 pages used for memmap
[ 0.000000] Normal zone: 270277 pages, LIFO batch:7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 333260
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=scsi1:/EFI/debian/vmlinuz root=/dev/sdb2 drm.debug=1 ro
[ 0.000000] Unknown boot option `drm.debug=1': ignoring
[ 0.000000] NR_IRQS:1024
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] CPU 0: base freq=200.000MHz, ITC ratio=15/2, ITC freq=1500.000MHz+/-750ppm
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.066200] Memory: 6215872k/6240416k available (6549k code, 48080k reserved, 3436k data, 816k init)
[ 0.066869] Calibrating delay loop... 2244.60 BogoMIPS (lpj=4489216)
[ 0.168175] Security Framework initialized
[ 0.168215] SELinux: Disabled at boot.
[ 0.168588] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes)
[ 0.175845] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes)
[ 0.179800] Mount-cache hash table entries: 1024
[ 0.180135] Initializing cgroup subsys ns
[ 0.180170] Initializing cgroup subsys cpuacct
[ 0.180206] Initializing cgroup subsys devices
[ 0.180240] Initializing cgroup subsys freezer
[ 0.180274] Initializing cgroup subsys net_cls
[ 0.180345] ACPI: Core revision 20090320
[ 0.183451] Boot processor id 0x0/0x0
[ 0.000000] CPU 1: synchronized ITC with CPU 0 (last diff -35 cycles, maxerr 669 cycles)
[ 0.000000] CPU 1: base freq=200.000MHz, ITC ratio=15/2, ITC freq=1500.000MHz+/-750ppm
[ 0.186597] Brought up 2 CPUs
[ 0.186630] Total of 2 processors activated (4489.21 BogoMIPS).
[ 0.187052] CPU0 attaching sched-domain:
[ 0.187056] domain 0: span 0-1 level CPU
[ 0.187060] groups: 0 1
[ 0.187066] domain 1: span 0-1 level NODE
[ 0.187069] groups: 0-1 (__cpu_power = 2048)
[ 0.187075] CPU1 attaching sched-domain:
[ 0.187078] domain 0: span 0-1 level CPU
[ 0.187081] groups: 1 0
[ 0.187085] domain 1: span 0-1 level NODE
[ 0.187088] groups: 0-1 (__cpu_power = 2048)
[ 0.187684] net_namespace: 1936 bytes
[ 0.187770] DMI 2.3 present.
[ 0.188054] regulator: core version 0.5
[ 0.188261] NET: Registered protocol family 16
[ 0.188746] ACPI: bus type pci registered
[ 0.190850] bio: create slab <bio-0> at 0
[ 0.191658] ACPI: EC: Look up EC in DSDT
[ 0.201773] ACPI: Interpreter enabled
[ 0.201805] ACPI: (supports S0 S5)
[ 0.201882] ACPI: Using IOSAPIC for interrupt routing
[ 0.368391] ACPI: No dock devices found.
[ 0.369323] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.401604] pci 0000:00:01.0: reg 10 32bit mmio: [0x80023000-0x80023fff]
[ 0.402769] pci 0000:00:01.0: supports D1 D2
[ 0.402772] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot
[ 0.402869] pci 0000:00:01.0: PME# disabled
[ 0.403665] pci 0000:00:01.1: reg 10 32bit mmio: [0x80022000-0x80022fff]
[ 0.404826] pci 0000:00:01.1: supports D1 D2
[ 0.404829] pci 0000:00:01.1: PME# supported from D0 D1 D2 D3hot
[ 0.404924] pci 0000:00:01.1: PME# disabled
[ 0.405720] pci 0000:00:01.2: reg 10 32bit mmio: [0x80021000-0x800210ff]
[ 0.406879] pci 0000:00:01.2: supports D1 D2
[ 0.406882] pci 0000:00:01.2: PME# supported from D0 D1 D2 D3hot
[ 0.406978] pci 0000:00:01.2: PME# disabled
[ 0.407923] pci 0000:00:02.0: reg 10 io port: [0xd58-0xd5f]
[ 0.408043] pci 0000:00:02.0: reg 14 io port: [0xd64-0xd67]
[ 0.408168] pci 0000:00:02.0: reg 18 io port: [0xd50-0xd57]
[ 0.408294] pci 0000:00:02.0: reg 1c io port: [0xd60-0xd63]
[ 0.408420] pci 0000:00:02.0: reg 20 io port: [0xd40-0xd4f]
[ 0.409121] pci 0000:00:02.0: supports D1 D2
[ 0.409889] pci 0000:00:03.0: reg 10 32bit mmio: [0x80020000-0x80020fff]
[ 0.410015] pci 0000:00:03.0: reg 14 io port: [0xd00-0xd3f]
[ 0.410140] pci 0000:00:03.0: reg 18 32bit mmio: [0x80000000-0x8001ffff]
[ 0.411055] pci 0000:00:03.0: supports D1 D2
[ 0.411058] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.411155] pci 0000:00:03.0: PME# disabled
[ 0.412195] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI0._PRT]
[ 0.415386] ACPI: PCI Root Bridge [PCI1] (0000:20)
[ 0.453211] pci 0000:20:01.0: reg 10 io port: [0x2100-0x21ff]
[ 0.453503] pci 0000:20:01.0: reg 14 64bit mmio: [0x90840000-0x9084ffff]
[ 0.453796] pci 0000:20:01.0: reg 1c 64bit mmio: [0x90830000-0x9083ffff]
[ 0.454088] pci 0000:20:01.0: reg 30 32bit mmio: [0x90400000-0x907fffff]
[ 0.454741] pci 0000:20:01.0: supports D1 D2
[ 0.455937] pci 0000:20:01.1: reg 10 io port: [0x2000-0x20ff]
[ 0.456221] pci 0000:20:01.1: reg 14 64bit mmio: [0x90820000-0x9082ffff]
[ 0.456514] pci 0000:20:01.1: reg 1c 64bit mmio: [0x90810000-0x9081ffff]
[ 0.456807] pci 0000:20:01.1: reg 30 32bit mmio: [0x90000000-0x903fffff]
[ 0.457460] pci 0000:20:01.1: supports D1 D2
[ 0.459233] pci 0000:20:02.0: reg 10 64bit mmio: [0x90800000-0x9080ffff]
[ 0.460736] pci 0000:20:02.0: PME# supported from D3hot D3cold
[ 0.460843] pci 0000:20:02.0: PME# disabled
[ 0.462184] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI1._PRT]
[ 0.474292] ACPI: PCI Root Bridge [PCI2] (0000:40)
[ 0.504222] pci 0000:40:01.0: reg 10 io port: [0x3000-0x307f]
[ 0.505870] pci 0000:40:01.0: supports D2
[ 0.506913] pci 0000:40:01.1: reg 10 io port: [0x3080-0x308f]
[ 0.508570] pci 0000:40:01.1: supports D1
[ 0.508573] pci 0000:40:01.1: PME# supported from D1 D3hot
[ 0.508694] pci 0000:40:01.1: PME# disabled
[ 0.510459] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI2._PRT]
[ 0.555742] ACPI: PCI Root Bridge [PCI3] (0000:60)
[ 0.586232] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI3._PRT]
[ 0.588963] ACPI: PCI Root Bridge [PCI4] (0000:80)
[ 0.625794] pci 0000:80:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.626019] pci 0000:80:00.0: reg 14 io port: [0x8000-0x80ff]
[ 0.626244] pci 0000:80:00.0: reg 18 32bit mmio: [0xd8030000-0xd803ffff]
[ 0.627132] pci 0000:80:00.0: reg 30 32bit mmio: [0xd8000000-0xd801ffff]
[ 0.627302] pci 0000:80:00.0: Boot video device
[ 0.628284] pci 0000:80:00.0: supports D1 D2
[ 0.629725] pci 0000:80:00.1: reg 10 32bit mmio: [0xc8000000-0xcfffffff]
[ 0.629951] pci 0000:80:00.1: reg 14 32bit mmio: [0xd8020000-0xd802ffff]
[ 0.631831] pci 0000:80:00.1: supports D1 D2
[ 0.634109] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI4._PRT]
[ 0.678783] ACPI: PCI Root Bridge [PCI6] (0000:c0)
[ 0.709713] ACPI: PCI Interrupt Routing Table [\_SB_.SBA0.PCI6._PRT]
[ 0.769426] IOC: reserving 512Mb of IOVA space at 0x60000000 for agpgart
[ 0.769469] IOC: zx1 2.3 HPA 0xfed01000 IOVA space 1024Mb at 0x40000000
[ 0.860006] pnp: PnP ACPI init
[ 0.860046] ACPI: bus type pnp registered
[ 0.952892] GSI 34 (edge, high) -> CPU 1 (0x0100) vector 49
[ 0.954148] GSI 35 (edge, high) -> CPU 0 (0x0000) vector 50
[ 1.071752] pnp: PnP ACPI: found 10 devices
[ 1.071784] ACPI: ACPI bus type pnp unregistered
[ 1.072441] NET: Registered protocol family 2
[ 1.124199] IP route cache hash table entries: 262144 (order: 7, 2097152 bytes)
[ 1.125870] TCP established hash table entries: 524288 (order: 9, 8388608 bytes)
[ 1.133474] TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
[ 1.134489] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.134526] TCP reno registered
[ 1.144193] NET: Registered protocol family 1
[ 1.144323] Trying to unpack rootfs image as initramfs...
[ 1.578716] Freeing initrd memory: 12272kB freed
[ 1.579070] perfmon: version 2.0 IRQ 238
[ 1.579109] perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
[ 1.580411] perfmon: added sampling format default_format
[ 1.580447] perfmon_default_smpl: default_format v2.0 registered
[ 1.580919] audit: initializing netlink socket (disabled)
[ 1.580972] type=2000 audit(1253060583.580:1): initialized
[ 1.581700] HugeTLB registered 256 MB page size, pre-allocated 0 pages
[ 1.582024] VFS: Disk quotas dquot_6.5.2
[ 1.582126] Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 1.582256] msgmni has been set to 12164
[ 1.582638] alg: No test for stdrng (krng)
[ 1.582782] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.582831] io scheduler noop registered
[ 1.582863] io scheduler anticipatory registered
[ 1.582897] io scheduler deadline registered
[ 1.582978] io scheduler cfq registered (default)
[ 1.583289] pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
[ 1.583909] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.583957] ACPI: Power Button [PWRF]
[ 1.584107] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 1.584154] ACPI: Sleep Button [SLPF]
[ 1.584940] processor ACPI_CPU:00: registered as cooling_device0
[ 1.585439] processor ACPI_CPU:01: registered as cooling_device1
[ 1.692767] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.692809] ACPI: Thermal Zone [THM0] (27 C)
[ 1.698069] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.698736] 00:04: ttyS0 at MMIO 0xff5e0000 (irq = 49) is a 16550A
[ 1.698983] 00:05: ttyS1 at MMIO 0xff5e2000 (irq = 50) is a 16550A
[ 1.701696] brd: module loaded
[ 1.702164] mice: PS/2 mouse device common for all mice
[ 1.702362] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
[ 1.703050] TCP cubic registered
[ 1.703083] NET: Registered protocol family 17
[ 1.703955] registered taskstats version 1
[ 1.706188] rtc-efi rtc-efi: setting system clock to 2009-09-16 00:23:04 UTC (1253060584)
[ 1.706270] Freeing unused kernel memory: 816kB freed
[ 1.881092] Uniform Multi-Platform E-IDE driver
[ 1.883772] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.883819] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.884141] GSI 20 (level, low) -> CPU 1 (0x0100) vector 51
[ 1.884179] e100 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 51
[ 1.905351] SCSI subsystem initialized
[ 1.914646] Fusion MPT base driver 3.04.07
[ 1.914678] Copyright (c) 1999-2008 LSI Corporation
[ 1.924415] tg3.c:v3.98 (February 25, 2009)
[ 1.924622] GSI 29 (level, low) -> CPU 0 (0x0000) vector 52
[ 1.924658] tg3 0000:20:02.0: PCI INT A -> GSI 29 (level, low) -> IRQ 52
[ 1.930925] Fusion MPT SPI Host driver 3.04.07
[ 1.932176] tg3 0000:20:02.0: PME# disabled
[ 1.981637] e100 0000:00:03.0: PME# disabled
[ 2.028303] usbcore: registered new interface driver usbfs
[ 2.028401] usbcore: registered new interface driver hub
[ 2.028865] e100: eth0: e100_probe: addr 0x80020000, irq 51, MAC addr 00:30:6e:4a:d3:ab
[ 2.028958] cmd64x 0000:00:02.0: IDE controller (0x1095:0x0649 rev 0x02)
[ 2.029008] usbcore: registered new device driver usb
[ 2.029175] GSI 21 (level, low) -> CPU 1 (0x0100) vector 53
[ 2.029216] CMD64x_IDE 0000:00:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 53
[ 2.029365] cmd64x 0000:00:02.0: IDE port disabled
[ 2.029505] cmd64x 0000:00:02.0: 100% native mode on irq 53
[ 2.029576] ide0: BM-DMA at 0x0d40-0x0d47
[ 2.029646] Probing IDE interface ide0...
[ 2.033332] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.428340] hda: DV-28E-B, ATAPI CD/DVD-ROM drive
[ 3.100080] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 3.105657] hda: UDMA/33 mode selected
[ 3.105956] ide0 at 0xd58-0xd5f,0xd66 on irq 53
[ 3.106266] GSI 18 (level, low) -> CPU 0 (0x0000) vector 54
[ 3.106304] ehci_hcd 0000:00:01.2: PCI INT C -> GSI 18 (level, low) -> IRQ 54
[ 3.106390] ehci_hcd 0000:00:01.2: EHCI Host Controller
[ 3.106521] ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 3.128735] ehci_hcd 0000:00:01.2: irq 54, io mem 0x80021000
[ 3.136862] libata version 3.00 loaded.
[ 3.140507] ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 0.95
[ 3.140573] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.140610] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.140656] usb usb1: Product: EHCI Host Controller
[ 3.140689] usb usb1: Manufacturer: Linux 2.6.30-1-mckinley ehci_hcd
[ 3.140724] usb usb1: SerialNumber: 0000:00:01.2
[ 3.140840] usb usb1: configuration #1 chosen from 1 choice
[ 3.140912] hub 1-0:1.0: USB hub found
[ 3.140954] hub 1-0:1.0: 5 ports detected
[ 3.144516] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.144675] GSI 16 (level, low) -> CPU 1 (0x0100) vector 55
[ 3.144710] ohci_hcd 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 55
[ 3.144779] ohci_hcd 0000:00:01.0: OHCI Host Controller
[ 3.144838] ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
[ 3.144903] ohci_hcd 0000:00:01.0: irq 55, io mem 0x80023000
[ 3.155424] ide-cd driver 5.00
[ 3.156097] ide-cd: hda: ATAPI 24X DVD-ROM drive, 256kB Cache
[ 3.156196] Uniform CD-ROM driver Revision: 3.20
[ 3.310058] eth1: Tigon3 [partno(BCM95700A6) rev 0105] (PCI:66MHz:64-bit) MAC address 00:30:6e:4a:d2:bd
[ 3.310110] eth1: attached PHY is 5701 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 3.310157] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[0]
[ 3.310192] eth1: dma_rwctrl[76ff2d0f] dma_mask[64-bit]
[ 3.310633] GSI 27 (level, low) -> CPU 0 (0x0000) vector 56
[ 3.310670] mptspi 0000:20:01.0: PCI INT A -> GSI 27 (level, low) -> IRQ 56
[ 3.311527] mptbase: ioc0: Initiating bringup
[ 3.710569] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.710607] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.710653] usb usb2: Product: OHCI Host Controller
[ 3.710686] usb usb2: Manufacturer: Linux 2.6.30-1-mckinley ohci_hcd
[ 3.710721] usb usb2: SerialNumber: 0000:00:01.0
[ 3.710829] usb usb2: configuration #1 chosen from 1 choice
[ 3.710897] hub 2-0:1.0: USB hub found
[ 3.710942] hub 2-0:1.0: 3 ports detected
[ 3.711207] GSI 17 (level, low) -> CPU 1 (0x0100) vector 57
[ 3.711243] ohci_hcd 0000:00:01.1: PCI INT B -> GSI 17 (level, low) -> IRQ 57
[ 3.711312] ohci_hcd 0000:00:01.1: OHCI Host Controller
[ 3.711374] ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 3
[ 3.711439] ohci_hcd 0000:00:01.1: irq 57, io mem 0x80022000
[ 3.788026] ioc0: LSI53C1030 B2: Capabilities={Initiator,Target}
[ 4.274566] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.274603] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.274649] usb usb3: Product: OHCI Host Controller
[ 4.274682] usb usb3: Manufacturer: Linux 2.6.30-1-mckinley ohci_hcd
[ 4.274717] usb usb3: SerialNumber: 0000:00:01.1
[ 4.274798] usb usb3: configuration #1 chosen from 1 choice
[ 4.274865] hub 3-0:1.0: USB hub found
[ 4.274909] hub 3-0:1.0: 2 ports detected
[ 4.302453] scsi0 : ioc0: LSI53C1030 B2, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=56
[ 4.640517] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 4.815524] usb 2-1: New USB device found, idVendor=045e, idProduct=0040
[ 4.815562] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.815599] usb 2-1: Product: Microsoft Wheel Mouse Optical®
[ 4.815633] usb 2-1: Manufacturer: Microsoft
[ 4.815756] usb 2-1: configuration #1 chosen from 1 choice
[ 4.828295] usbcore: registered new interface driver hiddev
[ 4.836692] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:01.0/usb2/2-1/2-1:1.0/input/input2
[ 4.836803] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:01.0-1/input0
[ 4.836875] usbcore: registered new interface driver usbhid
[ 4.836911] usbhid: v2.6:USB HID core driver
[ 5.012038] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 5.183526] usb 3-1: New USB device found, idVendor=03f0, idProduct=0024
[ 5.183563] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.183599] usb 3-1: Product: HP Basic USB Keyboard
[ 5.183632] usb 3-1: Manufacturer: CHICONY
[ 5.183721] usb 3-1: configuration #1 chosen from 1 choice
[ 5.188212] GSI 28 (level, low) -> CPU 0 (0x0000) vector 58
[ 5.188249] mptspi 0000:20:01.1: PCI INT B -> GSI 28 (level, low) -> IRQ 58
[ 5.188477] mptbase: ioc1: Initiating bringup
[ 5.195703] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:01.1/usb3/3-1/3-1:1.0/input/input3
[ 5.195794] generic-usb 0003:03F0:0024.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:01.1-1/input0
[ 5.668044] ioc1: LSI53C1030 B2: Capabilities={Initiator,Target}
[ 6.182447] scsi1 : ioc1: LSI53C1030 B2, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=58
[ 6.184305] scsi 0:0:0:0: Direct-Access HP 73.4G ST373453LC HPC5 PQ: 0 ANSI: 3
[ 6.184363] scsi target0:0:0: Beginning Domain Validation
[ 6.199340] scsi target0:0:0: Ending Domain Validation
[ 6.199444] scsi target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 6.202232] scsi 0:0:1:0: Direct-Access HP 73.4G ST373453LC HPC5 PQ: 0 ANSI: 3
[ 6.202283] scsi target0:0:1: Beginning Domain Validation
[ 6.217257] scsi target0:0:1: Ending Domain Validation
[ 6.217360] scsi target0:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 7.571488] scsi 1:0:2:0: Direct-Access HP 73.4G ST373453LC HPC5 PQ: 0 ANSI: 3
[ 7.571542] scsi target1:0:2: Beginning Domain Validation
[ 7.586521] scsi target1:0:2: Ending Domain Validation
[ 7.586624] scsi target1:0:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 63)
[ 9.828165] Driver 'sd' needs updating - please use bus_type methods
[ 9.828965] sd 0:0:0:0: [sda] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB)
[ 9.829031] sd 0:0:1:0: [sdb] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB)
[ 9.830290] sd 0:0:0:0: [sda] Write Protect is off
[ 9.830324] sd 0:0:0:0: [sda] Mode Sense: d3 00 10 08
[ 9.830358] sd 0:0:1:0: [sdb] Write Protect is off
[ 9.830393] sd 0:0:1:0: [sdb] Mode Sense: d3 00 10 08
[ 9.831924] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 9.832059] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 9.835480] sda:<6> sdb: sda1 sda2 sda3
[ 9.858013] sd 0:0:0:0: [sda] Attached SCSI disk
[ 9.860548] sdb1 sdb2 sdb3
[ 9.860808] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 10.273257] EXT4-fs: barriers enabled
[ 10.280107] kjournald2 starting: pid 959, dev sdb2:8, commit interval 5 seconds
[ 10.280124] EXT4-fs: delayed allocation enabled
[ 10.280127] EXT4-fs: file extents enabled
[ 10.281786] EXT4-fs: mballoc enabled
[ 10.281830] EXT4-fs: mounted filesystem sdb2 with ordered data mode
[ 10.590134] sd 1:0:2:0: [sdc] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB)
[ 10.591448] sd 1:0:2:0: [sdc] Write Protect is off
[ 10.591483] sd 1:0:2:0: [sdc] Mode Sense: d3 00 10 08
[ 10.593063] sd 1:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 10.597142] sdc: sdc1 sdc2 sdc3
[ 10.621815] sd 1:0:2:0: [sdc] Attached SCSI disk
[ 11.388746] udev: starting version 141
[ 11.808081] gameport: FM801 is pci0000:40:01.1/gameport0, io 0x3080, speed 871kHz
[ 12.331107] Linux video capture interface: v2.00
[ 12.483574] GSI 38 (level, low) -> CPU 1 (0x0100) vector 59
[ 12.483611] FM801 0000:40:01.0: PCI INT A -> GSI 38 (level, low) -> IRQ 59
[ 12.782653] Adding 2000768k swap on /dev/sdb3. Priority:-1 extents:1 across:2000768k
[ 12.932303] EXT4 FS on sdb2, internal journal on sdb2:8
[ 13.049151] Linux agpgart interface v0.103
[ 13.157650] agpgart: HP ZX1 IOC: IOPDIR shared with sba_iommu
[ 13.158007] <NULL>: AGP aperture is 512M @ 0x60000000
[ 13.158041] agpgart: Detected HP ZX1 HWP0003 AGP chipset (ioc=fed01000, lba=fed28000)
[ 14.182437] tg3 0000:20:02.0: PME# disabled
[ 14.978368] NET: Registered protocol family 10
[ 14.979208] lo: Disabled Privacy Extensions
[ 14.980371] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 16.574265] tg3: eth1: Link is up at 10 Mbps, half duplex.
[ 16.574317] tg3: eth1: Flow control is off for TX and off for RX.
[ 16.577863] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 17.465936] lp: driver loaded but no devices found
[ 17.477235] ppdev: user-space parallel port driver
[ 18.351219] Xorg(2449): unaligned access to 0x2000000000da0ee9, ip=0x20000000000183b1
[ 18.351240] Xorg(2449): unaligned access to 0x2000000000da0f31, ip=0x20000000000183b1
[ 18.351258] Xorg(2449): unaligned access to 0x2000000000da0ef2, ip=0x20000000000183b1
[ 18.351275] Xorg(2449): unaligned access to 0x2000000000da0efb, ip=0x20000000000183b1
[ 18.351291] Xorg(2449): unaligned access to 0x2000000000da0f04, ip=0x20000000000183b1
[ 18.539374] GSI 60 (level, low) -> CPU 0 (0x0000) vector 60
[ 18.539381] pci 0000:80:00.0: PCI INT A -> GSI 60 (level, low) -> IRQ 60
[ 24.899286] [drm] Initialized drm 1.1.0 20060810
[ 24.911897] [drm:drm_init]
[ 24.911975] [drm:drm_get_dev]
[ 24.912243] [drm:drm_get_minor]
[ 24.912367] [drm:drm_get_minor] new minor assigned 0
[ 24.912540] [drm:drm_addmap_core] offset = 0xd8030000, size = 0x00010000, type = 1
[ 24.912549] [drm:radeon_driver_load] AGP card detected
[ 24.912554] [drm] Initialized radeon 1.30.0 20080528 for 0000:80:00.0 on minor 0
[ 24.920084] [drm:drm_stub_open]
[ 24.920089] [drm:drm_open_helper] pid = 2449, minor = 0
[ 24.920093] [drm:radeon_driver_open]
[ 24.920098] [drm:drm_addmap_core] offset = 0x00000000, size = 0x00010000, type = 2
[ 24.920126] [drm:drm_addmap_core] 65536 16 a000000202dd8000
[ 24.920131] [drm:drm_addmap_core] offset = 0xd0000000, size = 0x08000000, type = 0
[ 24.920136] [drm:drm_setup]
[ 24.920194] [drm:drm_ioctl] pid=2449, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[ 24.920207] [drm:drm_ioctl] pid=2449, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1
[ 24.920217] [drm:drm_ioctl] pid=2449, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1
[ 24.920255] [drm:drm_ioctl] pid=2449, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[ 24.920262] [drm:drm_ioctl] pid=2449, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[ 24.920352] [drm:drm_release] open_count = 1
[ 24.920357] [drm:drm_release] pid = 2449, device = 0xe200, open_count = 1
[ 24.920368] [drm:drm_lastclose]
[ 24.920373] [drm:radeon_do_cleanup_cp]
[ 24.920376] [drm:drm_lastclose] driver lastclose completed
[ 24.920382] [drm:drm_lastclose] lastclose completed
[ 25.232618] [drm:drm_stub_open]
[ 25.232622] [drm:drm_open_helper] pid = 2449, minor = 0
[ 25.232625] [drm:radeon_driver_open]
[ 25.232630] [drm:drm_addmap_core] offset = 0x00000000, size = 0x00010000, type = 2
[ 25.232658] [drm:drm_addmap_core] 65536 16 a000000202df0000
[ 25.232663] [drm:drm_addmap_core] offset = 0xd0000000, size = 0x08000000, type = 0
[ 25.232667] [drm:drm_setup]
[ 25.232686] [drm:drm_ioctl] pid=2449, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[ 25.232692] [drm:drm_ioctl] pid=2449, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[ 25.232701] [drm:drm_release] open_count = 1
[ 25.232705] [drm:drm_release] pid = 2449, device = 0xe200, open_count = 1
[ 25.232712] [drm:drm_lastclose]
[ 25.232716] [drm:radeon_do_cleanup_cp]
[ 25.232719] [drm:drm_lastclose] driver lastclose completed
[ 25.232722] [drm:drm_lastclose] lastclose completed
[ 25.232756] [drm:drm_stub_open]
[ 25.232760] [drm:drm_open_helper] pid = 2449, minor = 0
[ 25.232763] [drm:radeon_driver_open]
[ 25.232767] [drm:drm_addmap_core] offset = 0x00000000, size = 0x00010000, type = 2
[ 25.232792] [drm:drm_addmap_core] 65536 16 a000000202e08000
[ 25.232797] [drm:drm_addmap_core] offset = 0xd0000000, size = 0x08000000, type = 0
[ 25.232801] [drm:drm_setup]
[ 25.232815] [drm:drm_ioctl] pid=2449, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[ 25.232821] [drm:drm_ioctl] pid=2449, cmd=0xc0406400, nr=0x00, dev 0xe200, auth=1
[ 25.232828] [drm:drm_release] open_count = 1
[ 25.232831] [drm:drm_release] pid = 2449, device = 0xe200, open_count = 1
[ 25.232838] [drm:drm_lastclose]
[ 25.232842] [drm:radeon_do_cleanup_cp]
[ 25.232844] [drm:drm_lastclose] driver lastclose completed
[ 25.232848] [drm:drm_lastclose] lastclose completed
[ 25.232875] [drm:drm_stub_open]
[ 25.232878] [drm:drm_open_helper] pid = 2449, minor = 0
[ 25.232881] [drm:radeon_driver_open]
[ 25.232886] [drm:drm_addmap_core] offset = 0x00000000, size = 0x00010000, type = 2
[ 25.232910] [drm:drm_addmap_core] 65536 16 a000000202e20000
[ 25.232914] [drm:drm_addmap_core] offset = 0xd0000000, size = 0x08000000, type = 0
[ 25.232919] [drm:drm_setup]
[ 25.232940] [drm:drm_ioctl] pid=2449, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[ 25.232947] [drm:drm_ioctl] pid=2449, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1
[ 25.232953] [drm:drm_ioctl] pid=2449, cmd=0xc0106401, nr=0x01, dev 0xe200, auth=1
[ 25.232970] [drm:drm_ioctl] pid=2449, cmd=0xc0106407, nr=0x07, dev 0xe200, auth=1
[ 25.232987] [drm:drm_ioctl] pid=2449, cmd=0xc0286415, nr=0x15, dev 0xe200, auth=1
[ 25.232992] [drm:drm_addmap_core] offset = 0x00000000, size = 0x00010000, type = 2
[ 25.233009] [drm:drm_mmap_locked] start = 0x200000000d400000, end = 0x200000000d410000, page offset = 0x3d88
[ 25.233013] [drm:drm_mmap_locked] *ERROR* Could not find map
[ 25.233037] [drm:drm_ioctl] pid=2449, cmd=0x4028641b, nr=0x1b, dev 0xe200, auth=1
[ 25.233041] [drm:drm_ioctl] ret = ffffffea
[ 25.233054] [drm:drm_release] open_count = 1
[ 25.233057] [drm:drm_release] pid = 2449, device = 0xe200, open_count = 1
[ 25.233064] [drm:drm_lastclose]
[ 25.233068] [drm:radeon_do_cleanup_cp]
[ 25.233071] [drm:drm_lastclose] driver lastclose completed
[ 25.233074] [drm:drm_lastclose] lastclose completed
[ 26.752038] eth1: no IPv6 routers present
[ 27.945922] gdmgreeter(2619): floating-point assist fault at ip 2000000000da48f2, isr 0000020000001001
[ 27.950617] gdmgreeter(2619): floating-point assist fault at ip 2000000000da48f2, isr 0000020000001001
[ 31.099570] gdmgreeter(2619): floating-point assist fault at ip 2000000000da48f2, isr 0000020000001001
[ 31.103007] gdmgreeter(2619): floating-point assist fault at ip 2000000000da48f2, isr 0000020000001001
Reply to: