On Fri, Jul 31, 2009 at 04:06:09PM +0200, Julien Cristau wrote: > On Fri, Jul 31, 2009 at 15:56:23 +0200, Mario 'BitKoenig' Holbe wrote: > > Please let me know if I can provide more evidence. > Xorg log and dmesg are a must. All right, here we go. All the evidence attached is from a fresh boot with linux-image-2.6.30-1-686-bigmem_2.6.30-4_i386.deb and xserver-xorg-video-intel_2%3a2.8.0-1_i386.deb, starting firefox to watch X at 100%, stopping it and playing some random video downloaded from youtube to crash X. Xorg.0.log.old The X.org log until the crash Xorg.0.log The X.org log after the crash - note the differences dmesg dmesg output after the crash mplayer.out mplayer output until the crash (just for completeness) > eww PAE kernel. GEM doesn't work there before 2.6.31, so that'd cause > issues. Indeed, xawtv does not complain anymore about failing to initialize GEM (whatever that might be). With the above setup xawtv works in 'overlay' capture mode and crashes X in 'grabdisplay' capture mode just like mplayer does. Would it probably be possible to just disable this GEM thingy on setups where it does not work? > Care to try either a .31-rc kernel, or the non-pae 2.6.30? I tried linux-image-2.6.30-1-686_2.6.30-4_i386.deb and X performs well with it, no crashes anymore. However, xawtv does not work anymore in 'overlay' capture mode - it shows a black screen only. The CPU-burden 'grabdisplay' capture mode works. regards Mario -- I heard, if you play a NT-CD backwards, you get satanic messages... That's nothing. If you play it forwards, it installs NT.
This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.6.2.901 (1.6.3 RC 1) Release Date: 2009-7-26 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.31-rc3-686 i686 Debian Current Operating System: Linux darkside 2.6.30-1-686-bigmem #1 SMP Thu Jul 30 15:59:54 UTC 2009 i686 Build Date: 26 July 2009 10:29:12PM xorg-server 2:1.6.2.901-1 (bgoglin@debian.org) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 31 16:40:34 2009 (II) Loader magic: 0x3bc0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0:0:2:0) 8086:2982:1043:8276 Intel Corporation 82G35 Express Integrated Graphics Controller rev 3, Mem @ 0xfe600000/1048576, 0xd0000000/268435456, I/O @ 0x0000bc00/8 (==) Using default built-in configuration (39 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" EndSection Section "Device" Identifier "Builtin Default i810 Device 0" Driver "i810" EndSection Section "Screen" Identifier "Builtin Default i810 Screen 0" Device "Builtin Default i810 Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" Screen "Builtin Default i810 Screen 0" Screen "Builtin Default vesa Screen 0" Screen "Builtin Default fbdev Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default intel Screen 0" (0) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default intel Device 0" (==) No monitor specified for screen "Builtin Default intel Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default i810 Screen 0" (1) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default i810 Device 0" (==) No monitor specified for screen "Builtin Default i810 Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default vesa Screen 0" (2) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default vesa Device 0" (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default fbdev Screen 0" (3) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default fbdev Device 0" (==) No monitor specified for screen "Builtin Default fbdev Screen 0". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/cyrillic, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.2, module version = 2.8.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "i810" (WW) Warning, couldn't open module i810 (II) UnloadModule: "i810" (EE) Failed to load module "i810" (module does not exist, 0) (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.2.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.6.0, module version = 0.4.0 ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D, IGDNG_M (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (WW) Falling back to old probe method for vesa (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 0.0.2 ABI class: X.Org Video Driver, version 5.0 (EE) open /dev/fb0: No such file or directory (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (EE) intel(0): [drm] Failed to detect GEM. Kernel 2.6.28 required. (EE) intel(0): Failed to become DRM master. (II) intel(0): Creating default Display subsection in Screen section "Builtin Default intel Screen 0" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) G35 (--) intel(0): Chipset: "G35" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xFE600000 size 1048576 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (II) intel(0): No SDVO device is found in VBT (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA has no monitor section (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): No SDVO device found on SDVOB (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID for output VGA (II) intel(0): Manufacturer: NTS Model: 0 Serial#: 0 (II) intel(0): Year: 2007 Week: 31 (II) intel(0): EDID Version: 1.3 (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) intel(0): Sync: Separate (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 32 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: Off; RGB/Color Display (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.653 redY: 0.337 greenX: 0.295 greenY: 0.607 (II) intel(0): blueX: 0.144 blueY: 0.075 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Supported established timings: (II) intel(0): 640x480@60Hz (II) intel(0): 800x600@56Hz (II) intel(0): 800x600@60Hz (II) intel(0): 1024x768@60Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported standard timings: (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129 (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) intel(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 (II) intel(0): #5: hsize: 1360 vsize 765 refresh: 60 vid: 49291 (II) intel(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) intel(0): #7: hsize: 1152 vsize 864 refresh: 60 vid: 16497 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 (II) intel(0): Monitor name: MB24W (II) intel(0): Ranges: V min: 50 V max: 61 Hz, H min: 30 H max: 74 kHz, PixClock max 160 MHz (II) intel(0): Serial No: (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff003a93000000000000 (II) intel(0): 1f110103083320782a5ad5a7564b9b24 (II) intel(0): 135054230800810081809500a940b300 (II) intel(0): 8bc081407140283c80a070b023403020 (II) intel(0): 360006442100001a000000fc004d4232 (II) intel(0): 34570a20202020202020000000fd0032 (II) intel(0): 3d1e4a10000a202020202020000000ff (II) intel(0): 000a2020202020202020202020200005 (II) intel(0): EDID vendor "NTS", prod id 0 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "1360x765"x60.0 84.39 1360 1424 1568 1776 765 766 769 792 -hsync +vsync (47.5 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (II) intel(0): EDID vendor "NTS", prod id 0 (II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Printing probed modes for output VGA (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1360x765"x60.0 84.39 1360 1424 1568 1776 765 766 769 792 -hsync +vsync (47.5 kHz) (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Output VGA connected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output VGA using initial mode 1920x1200 (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 7676 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (**) intel(0): Display dimensions: (510, 320) mm (**) intel(0): DPI set to (95, 95) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000b00 (II) UnloadModule: "vesa" (II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so (II) UnloadModule: "fbdev" (II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so (II) UnloadModule: "fbdevhw" (II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 1199616 total, 1 used (II) intel(0): I830CheckAvailableMemory: 4798460 kB available (WW) intel(0): DRI2: failed to open drm device (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (EE) intel(0): Failed to initialize kernel memory manager (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (WW) intel(0): drmSetMaster failed: Bad file descriptor (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0082a000 (pgoffset 2090) (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0082b000 (pgoffset 2091) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) (II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB) (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x0082a000-0x0082afff: overlay registers (4 kB) (II) intel(0): 0x0082b000-0x010f4fff: front buffer (9000 kB) X tiled (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is off (II) intel(0): Display plane B is now disabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: Failed (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: Screen 0 is not DRI2 capable (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) intel(0): Setting screen physical size to 518 x 324 (II) config/hal: Adding input device AT Translated Set 2 keyboard (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 2.2.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "de" (**) Option "xkb_variant" "nodeadkeys" (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp" (II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse (**) ImPS/2 Logitech Wheel Mouse: always reports core events (**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4" (II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons (II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes (II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s) (II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse (**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5 (**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE) (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1 (**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00 (**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms (**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID for output VGA (II) intel(0): Manufacturer: NTS Model: 0 Serial#: 0 (II) intel(0): Year: 2007 Week: 31 (II) intel(0): EDID Version: 1.3 (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) intel(0): Sync: Separate (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 32 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: Off; RGB/Color Display (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.653 redY: 0.337 greenX: 0.295 greenY: 0.607 (II) intel(0): blueX: 0.144 blueY: 0.075 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Supported established timings: (II) intel(0): 640x480@60Hz (II) intel(0): 800x600@56Hz (II) intel(0): 800x600@60Hz (II) intel(0): 1024x768@60Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported standard timings: (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129 (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) intel(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 (II) intel(0): #5: hsize: 1360 vsize 765 refresh: 60 vid: 49291 (II) intel(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) intel(0): #7: hsize: 1152 vsize 864 refresh: 60 vid: 16497 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 (II) intel(0): Monitor name: MB24W (II) intel(0): Ranges: V min: 50 V max: 61 Hz, H min: 30 H max: 74 kHz, PixClock max 160 MHz (II) intel(0): Serial No: (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff003a93000000000000 (II) intel(0): 1f110103083320782a5ad5a7564b9b24 (II) intel(0): 135054230800810081809500a940b300 (II) intel(0): 8bc081407140283c80a070b023403020 (II) intel(0): 360006442100001a000000fc004d4232 (II) intel(0): 34570a20202020202020000000fd0032 (II) intel(0): 3d1e4a10000a202020202020000000ff (II) intel(0): 000a2020202020202020202020200005 (II) intel(0): EDID vendor "NTS", prod id 0 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "1360x765"x60.0 84.39 1360 1424 1568 1776 765 766 769 792 -hsync +vsync (47.5 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (II) intel(0): EDID vendor "NTS", prod id 0 (II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Printing probed modes for output VGA (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1360x765"x60.0 84.39 1360 1424 1568 1776 765 766 769 792 -hsync +vsync (47.5 kHz) (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID for output VGA (II) intel(0): Manufacturer: NTS Model: 0 Serial#: 0 (II) intel(0): Year: 2007 Week: 31 (II) intel(0): EDID Version: 1.3 (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) intel(0): Sync: Separate (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 32 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: Off; RGB/Color Display (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.653 redY: 0.337 greenX: 0.295 greenY: 0.607 (II) intel(0): blueX: 0.144 blueY: 0.075 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Supported established timings: (II) intel(0): 640x480@60Hz (II) intel(0): 800x600@56Hz (II) intel(0): 800x600@60Hz (II) intel(0): 1024x768@60Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported standard timings: (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129 (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) intel(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 (II) intel(0): #5: hsize: 1360 vsize 765 refresh: 60 vid: 49291 (II) intel(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) intel(0): #7: hsize: 1152 vsize 864 refresh: 60 vid: 16497 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 (II) intel(0): Monitor name: MB24W (II) intel(0): Ranges: V min: 50 V max: 61 Hz, H min: 30 H max: 74 kHz, PixClock max 160 MHz (II) intel(0): Serial No: (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff003a93000000000000 (II) intel(0): 1f110103083320782a5ad5a7564b9b24 (II) intel(0): 135054230800810081809500a940b300 (II) intel(0): 8bc081407140283c80a070b023403020 (II) intel(0): 360006442100001a000000fc004d4232 (II) intel(0): 34570a20202020202020000000fd0032 (II) intel(0): 3d1e4a10000a202020202020000000ff (II) intel(0): 000a2020202020202020202020200005 (II) intel(0): EDID vendor "NTS", prod id 0 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "1360x765"x60.0 84.39 1360 1424 1568 1776 765 766 769 792 -hsync +vsync (47.5 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (II) intel(0): EDID vendor "NTS", prod id 0 (II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Printing probed modes for output VGA (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1360x765"x60.0 84.39 1360 1424 1568 1776 765 766 769 792 -hsync +vsync (47.5 kHz) (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
This is a pre-release version of the X server from The X.Org Foundation. It is not supported in any way. Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/. Select the "xorg" product for bugs you find in this release. Before reporting bugs in pre-release versions please check the latest version in the X.Org Foundation git repository. See http://wiki.x.org/wiki/GitPage for git access instructions. X.Org X Server 1.6.2.901 (1.6.3 RC 1) Release Date: 2009-7-26 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.31-rc3-686 i686 Debian Current Operating System: Linux darkside 2.6.30-1-686-bigmem #1 SMP Thu Jul 30 15:59:54 UTC 2009 i686 Build Date: 26 July 2009 10:29:12PM xorg-server 2:1.6.2.901-1 (bgoglin@debian.org) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 31 16:46:16 2009 (II) Loader magic: 0x3bc0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on linux (++) using VT number 7 (--) PCI:*(0:0:2:0) 8086:2982:1043:8276 Intel Corporation 82G35 Express Integrated Graphics Controller rev 3, Mem @ 0xfe600000/1048576, 0xd0000000/268435456, I/O @ 0x0000bc00/8 (==) Using default built-in configuration (39 lines) (==) --- Start of built-in configuration --- Section "Device" Identifier "Builtin Default intel Device 0" Driver "intel" EndSection Section "Screen" Identifier "Builtin Default intel Screen 0" Device "Builtin Default intel Device 0" EndSection Section "Device" Identifier "Builtin Default i810 Device 0" Driver "i810" EndSection Section "Screen" Identifier "Builtin Default i810 Screen 0" Device "Builtin Default i810 Device 0" EndSection Section "Device" Identifier "Builtin Default vesa Device 0" Driver "vesa" EndSection Section "Screen" Identifier "Builtin Default vesa Screen 0" Device "Builtin Default vesa Device 0" EndSection Section "Device" Identifier "Builtin Default fbdev Device 0" Driver "fbdev" EndSection Section "Screen" Identifier "Builtin Default fbdev Screen 0" Device "Builtin Default fbdev Device 0" EndSection Section "ServerLayout" Identifier "Builtin Default Layout" Screen "Builtin Default intel Screen 0" Screen "Builtin Default i810 Screen 0" Screen "Builtin Default vesa Screen 0" Screen "Builtin Default fbdev Screen 0" EndSection (==) --- End of built-in configuration --- (==) ServerLayout "Builtin Default Layout" (**) |-->Screen "Builtin Default intel Screen 0" (0) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default intel Device 0" (==) No monitor specified for screen "Builtin Default intel Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default i810 Screen 0" (1) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default i810 Device 0" (==) No monitor specified for screen "Builtin Default i810 Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default vesa Screen 0" (2) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default vesa Device 0" (==) No monitor specified for screen "Builtin Default vesa Screen 0". Using a default monitor configuration. (**) |-->Screen "Builtin Default fbdev Screen 0" (3) (**) | |-->Monitor "<default monitor>" (**) | |-->Device "Builtin Default fbdev Device 0" (==) No monitor specified for screen "Builtin Default fbdev Screen 0". Using a default monitor configuration. (==) Automatically adding devices (==) Automatically enabling devices (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/cyrillic, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins (==) ModulePath set to "/usr/lib/xorg/modules" (II) Cannot locate a core pointer device. (II) Cannot locate a core keyboard device. (II) The server relies on HAL to provide the list of input devices. If no devices become available, reconfigure HAL or disable AllowEmptyInput. (II) Open ACPI successful (/var/run/acpid.socket) (II) System resource ranges: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension SELinux (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.1.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.2, module version = 2.8.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "i810" (WW) Warning, couldn't open module i810 (II) UnloadModule: "i810" (EE) Failed to load module "i810" (module does not exist, 0) (II) LoadModule: "vesa" (II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.2.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "fbdev" (II) Loading /usr/lib/xorg/modules/drivers//fbdev_drv.so (II) Module fbdev: vendor="X.Org Foundation" compiled for 1.6.0, module version = 0.4.0 ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel® GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D, IGDNG_M (II) VESA: driver for VESA chipsets: vesa (II) FBDEV: driver for framebuffer: fbdev (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (WW) Falling back to old probe method for vesa (WW) Falling back to old probe method for fbdev (II) Loading sub module "fbdevhw" (II) LoadModule: "fbdevhw" (II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so (II) Module fbdevhw: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 0.0.2 ABI class: X.Org Video Driver, version 5.0 (EE) open /dev/fb0: No such file or directory (II) resource ranges after probing: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 8, (OK) drmOpenByBusid: drmOpenMinor returns 8 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (EE) intel(0): [drm] Failed to detect GEM. Kernel 2.6.28 required. (EE) intel(0): Failed to become DRM master. (II) intel(0): Creating default Display subsection in Screen section "Builtin Default intel Screen 0" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) G35 (--) intel(0): Chipset: "G35" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xFE600000 size 1048576 (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB (II) intel(0): No SDVO device is found in VBT (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA has no monitor section (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): No SDVO device found on SDVOB (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID for output VGA (II) intel(0): Manufacturer: NTS Model: 0 Serial#: 0 (II) intel(0): Year: 2007 Week: 31 (II) intel(0): EDID Version: 1.3 (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) intel(0): Sync: Separate (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 32 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: Off; RGB/Color Display (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.653 redY: 0.337 greenX: 0.295 greenY: 0.607 (II) intel(0): blueX: 0.144 blueY: 0.075 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Supported established timings: (II) intel(0): 640x480@60Hz (II) intel(0): 800x600@56Hz (II) intel(0): 800x600@60Hz (II) intel(0): 1024x768@60Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported standard timings: (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129 (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) intel(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 (II) intel(0): #5: hsize: 1360 vsize 765 refresh: 60 vid: 49291 (II) intel(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) intel(0): #7: hsize: 1152 vsize 864 refresh: 60 vid: 16497 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 (II) intel(0): Monitor name: MB24W (II) intel(0): Ranges: V min: 50 V max: 61 Hz, H min: 30 H max: 74 kHz, PixClock max 160 MHz (II) intel(0): Serial No: (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff003a93000000000000 (II) intel(0): 1f110103083320782a5ad5a7564b9b24 (II) intel(0): 135054230800810081809500a940b300 (II) intel(0): 8bc081407140283c80a070b023403020 (II) intel(0): 360006442100001a000000fc004d4232 (II) intel(0): 34570a20202020202020000000fd0032 (II) intel(0): 3d1e4a10000a202020202020000000ff (II) intel(0): 000a2020202020202020202020200005 (II) intel(0): EDID vendor "NTS", prod id 0 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "1360x765"x60.0 84.39 1360 1424 1568 1776 765 766 769 792 -hsync +vsync (47.5 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (II) intel(0): EDID vendor "NTS", prod id 0 (II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Printing probed modes for output VGA (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1360x765"x60.0 84.39 1360 1424 1568 1776 765 766 769 792 -hsync +vsync (47.5 kHz) (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Output VGA connected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output VGA using initial mode 1920x1200 (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 7676 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (**) intel(0): Display dimensions: (510, 320) mm (**) intel(0): DPI set to (95, 95) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) intel(0): Comparing regs from server start up to After PreInit (II) UnloadModule: "vesa" (II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so (II) UnloadModule: "fbdev" (II) Unloading /usr/lib/xorg/modules/drivers//fbdev_drv.so (II) UnloadModule: "fbdevhw" (II) Unloading /usr/lib/xorg/modules/linux//libfbdevhw.so (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 1199616 total, 1 used (II) intel(0): I830CheckAvailableMemory: 4798460 kB available (WW) intel(0): DRI2: failed to open drm device (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (**) intel(0): SwapBuffers wait enabled (EE) intel(0): Failed to initialize kernel memory manager (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) UXA(0): Driver registered support for the following operations: (II) solid (II) copy (II) composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (WW) intel(0): drmSetMaster failed: Bad file descriptor (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919) (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0082a000 (pgoffset 2090) (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0082b000 (pgoffset 2091) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) (II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB) (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x0082a000-0x0082afff: overlay registers (4 kB) (II) intel(0): 0x0082b000-0x010f4fff: front buffer (9000 kB) X tiled (II) intel(0): 0x10000000: end of aperture (II) intel(0): BO memory allocation layout: (WW) intel(0): ESR is 0x00000001 (WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled (WW) intel(0): Existing errors found in hardware state. (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is off (II) intel(0): Display plane B is now disabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe A (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: Failed (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE SELinux: Disabled on system, not enabling in X server (II) AIGLX: Screen 0 is not DRI2 capable (II) AIGLX: Screen 0 is not DRI capable (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) intel(0): Setting screen physical size to 518 x 324 (II) config/hal: Adding input device AT Translated Set 2 keyboard (II) LoadModule: "evdev" (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so (II) Module evdev: vendor="X.Org Foundation" compiled for 1.6.2.901, module version = 2.2.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) AT Translated Set 2 keyboard: always reports core events (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" (II) AT Translated Set 2 keyboard: Found keys (II) AT Translated Set 2 keyboard: Configuring as keyboard (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "pc105" (**) Option "xkb_layout" "de" (**) Option "xkb_variant" "nodeadkeys" (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp" (II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse (**) ImPS/2 Logitech Wheel Mouse: always reports core events (**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event4" (II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons (II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes (II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s) (II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse (**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5 (**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE) (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1 (**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00 (**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms (**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID for output VGA (II) intel(0): Manufacturer: NTS Model: 0 Serial#: 0 (II) intel(0): Year: 2007 Week: 31 (II) intel(0): EDID Version: 1.3 (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) intel(0): Sync: Separate (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 32 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: Off; RGB/Color Display (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.653 redY: 0.337 greenX: 0.295 greenY: 0.607 (II) intel(0): blueX: 0.144 blueY: 0.075 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Supported established timings: (II) intel(0): 640x480@60Hz (II) intel(0): 800x600@56Hz (II) intel(0): 800x600@60Hz (II) intel(0): 1024x768@60Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported standard timings: (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129 (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) intel(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 (II) intel(0): #5: hsize: 1360 vsize 765 refresh: 60 vid: 49291 (II) intel(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) intel(0): #7: hsize: 1152 vsize 864 refresh: 60 vid: 16497 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 (II) intel(0): Monitor name: MB24W (II) intel(0): Ranges: V min: 50 V max: 61 Hz, H min: 30 H max: 74 kHz, PixClock max 160 MHz (II) intel(0): Serial No: (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff003a93000000000000 (II) intel(0): 1f110103083320782a5ad5a7564b9b24 (II) intel(0): 135054230800810081809500a940b300 (II) intel(0): 8bc081407140283c80a070b023403020 (II) intel(0): 360006442100001a000000fc004d4232 (II) intel(0): 34570a20202020202020000000fd0032 (II) intel(0): 3d1e4a10000a202020202020000000ff (II) intel(0): 000a2020202020202020202020200005 (II) intel(0): EDID vendor "NTS", prod id 0 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "1360x765"x60.0 84.39 1360 1424 1568 1776 765 766 769 792 -hsync +vsync (47.5 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (II) intel(0): EDID vendor "NTS", prod id 0 (II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Printing probed modes for output VGA (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1360x765"x60.0 84.39 1360 1424 1568 1776 765 766 769 792 -hsync +vsync (47.5 kHz) (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): EDID for output VGA (II) intel(0): Manufacturer: NTS Model: 0 Serial#: 0 (II) intel(0): Year: 2007 Week: 31 (II) intel(0): EDID Version: 1.3 (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) intel(0): Sync: Separate (II) intel(0): Max Image Size [cm]: horiz.: 51 vert.: 32 (II) intel(0): Gamma: 2.20 (II) intel(0): DPMS capabilities: Off; RGB/Color Display (II) intel(0): First detailed timing is preferred mode (II) intel(0): redX: 0.653 redY: 0.337 greenX: 0.295 greenY: 0.607 (II) intel(0): blueX: 0.144 blueY: 0.075 whiteX: 0.313 whiteY: 0.329 (II) intel(0): Supported established timings: (II) intel(0): 640x480@60Hz (II) intel(0): 800x600@56Hz (II) intel(0): 800x600@60Hz (II) intel(0): 1024x768@60Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported standard timings: (II) intel(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129 (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) intel(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) intel(0): #3: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) intel(0): #4: hsize: 1680 vsize 1050 refresh: 60 vid: 179 (II) intel(0): #5: hsize: 1360 vsize 765 refresh: 60 vid: 49291 (II) intel(0): #6: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) intel(0): #7: hsize: 1152 vsize 864 refresh: 60 vid: 16497 (II) intel(0): Supported detailed timing: (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0 (II) intel(0): Monitor name: MB24W (II) intel(0): Ranges: V min: 50 V max: 61 Hz, H min: 30 H max: 74 kHz, PixClock max 160 MHz (II) intel(0): Serial No: (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff003a93000000000000 (II) intel(0): 1f110103083320782a5ad5a7564b9b24 (II) intel(0): 135054230800810081809500a940b300 (II) intel(0): 8bc081407140283c80a070b023403020 (II) intel(0): 360006442100001a000000fc004d4232 (II) intel(0): 34570a20202020202020000000fd0032 (II) intel(0): 3d1e4a10000a202020202020000000ff (II) intel(0): 000a2020202020202020202020200005 (II) intel(0): EDID vendor "NTS", prod id 0 (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "1360x765"x60.0 84.39 1360 1424 1568 1776 765 766 769 792 -hsync +vsync (47.5 kHz) (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (II) intel(0): EDID vendor "NTS", prod id 0 (II) intel(0): Not using mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Printing probed modes for output VGA (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz) (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz) (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz) (II) intel(0): Modeline "1360x765"x60.0 84.39 1360 1424 1568 1776 765 766 769 792 -hsync +vsync (47.5 kHz) (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz) (II) intel(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.30-1-686-bigmem (Debian 2.6.30-4) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-15) ) #1 SMP Thu Jul 30 15:59:54 UTC 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cf780000 (usable) [ 0.000000] BIOS-e820: 00000000cf780000 - 00000000cf78e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cf78e000 - 00000000cf7e0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cf7e0000 - 00000000cf800000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 100000000 mask FE0000000 write-back [ 0.000000] 4 base 120000000 mask FF0000000 write-back [ 0.000000] 5 base 0CF800000 mask FFF800000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 3328MB, range: 256MB, type UC [ 0.000000] reg 1, base: 3584MB, range: 512MB, type UC [ 0.000000] reg 2, base: 0GB, range: 4GB, type WB [ 0.000000] reg 3, base: 4GB, range: 512MB, type WB [ 0.000000] reg 4, base: 4608MB, range: 256MB, type WB [ 0.000000] reg 5, base: 3320MB, range: 8MB, type UC [ 0.000000] total RAM coverred: 4088M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 6 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3GB, range: 256MB, type WB [ 0.000000] reg 3, base: 3320MB, range: 8MB, type UC [ 0.000000] reg 4, base: 4GB, range: 512MB, type WB [ 0.000000] reg 5, base: 4608MB, range: 256MB, type WB [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000cf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 10000-16000 [ 0.000000] RAMDISK: 0363b000 - 040fe8de [ 0.000000] ACPI: RSDP 000fb630 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT cf780100 0005C (v01 A_M_I_ OEMXSDT 02000913 MSFT 00000097) [ 0.000000] ACPI: FACP cf780290 000F4 (v03 A_M_I_ OEMFACP 02000913 MSFT 00000097) [ 0.000000] ACPI: DSDT cf7805c0 09984 (v01 A0868 A0868001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS cf78e000 00040 [ 0.000000] ACPI: APIC cf780390 0006C (v01 A_M_I_ OEMAPIC 02000913 MSFT 00000097) [ 0.000000] ACPI: MCFG cf780400 0003C (v01 A_M_I_ OEMMCFG 02000913 MSFT 00000097) [ 0.000000] ACPI: OEMB cf78e040 00081 (v01 A_M_I_ AMI_OEM 02000913 MSFT 00000097) [ 0.000000] ACPI: HPET cf789f50 00038 (v01 A_M_I_ OEMHPET 02000913 MSFT 00000097) [ 0.000000] ACPI: GSCI cf78e0d0 02024 (v01 A_M_I_ GMCHSCI 02000913 MSFT 00000097) [ 0.000000] ACPI: OSFR cf789f90 000B0 (v01 A_M_I_ OEMOSFR 02000913 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 3974MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f40 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 0000563290] TEXT DATA BSS ==> [0000100000 - 0000563290] [ 0.000000] #4 [000363b000 - 00040fe8de] RAMDISK ==> [000363b000 - 00040fe8de] [ 0.000000] #5 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #6 [0000564000 - 000056921c] BRK ==> [0000564000 - 000056921c] [ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cf780 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1046286 [ 0.000000] free_area_init_node: node 0, pgdat c041ba00, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 7949 pages used for memmap [ 0.000000] HighMem zone: 810613 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: cf800000:2f600000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages at c40ff000, static data 25532 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1036557 [ 0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=/dev/mapper/md1 console=ttyS0,38400n8 console=tty0 elevator=anticipatory raid=noautodetect panic=60 parport=0x378,7,3 8250.nr_uarts=10 enable_mtrr_cleanup [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] NR_IRQS:1280 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3006.089 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] console [ttyS0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Initializing HighMem for node 0 (000379fe:00130000) [ 0.004000] Memory: 4128632k/4980736k available (2216k kernel code, 55532k reserved, 1188k data, 332k init, 3274248k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffe16000 - 0xfffff000 (1956 kB) [ 0.004000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.004000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.004000] .init : 0xc045a000 - 0xc04ad000 ( 332 kB) [ 0.004000] .data : 0xc032a30b - 0xc0453430 (1188 kB) [ 0.004000] .text : 0xc0100000 - 0xc032a30b (2216 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 6012.17 BogoMIPS (lpj=12024356) [ 0.012025] Security Framework initialized [ 0.016004] SELinux: Disabled at boot. [ 0.020014] Mount-cache hash table entries: 512 [ 0.024081] Initializing cgroup subsys ns [ 0.028003] Initializing cgroup subsys cpuacct [ 0.032004] Initializing cgroup subsys devices [ 0.036002] Initializing cgroup subsys freezer [ 0.040002] Initializing cgroup subsys net_cls [ 0.044014] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.052002] CPU: L2 cache: 6144K [ 0.056003] CPU: Physical Processor ID: 0 [ 0.060002] CPU: Processor Core ID: 0 [ 0.064004] Intel machine check architecture supported. [ 0.068003] Intel machine check reporting enabled on CPU#0. [ 0.072002] using mwait in idle threads. [ 0.076008] Checking 'hlt' instruction... OK. [ 0.098103] ACPI: Core revision 20090320 [ 0.112391] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.157802] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06 [ 0.172001] APIC calibration not consistent with PM-Timer: 115ms instead of 100ms [ 0.172001] APIC delta adjusted to PM-Timer: 2087188 (2421112) [ 0.172152] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 6011.10 BogoMIPS (lpj=12022207) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 6144K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] Intel machine check architecture supported. [ 0.004000] Intel machine check reporting enabled on CPU#1. [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.269448] CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06 [ 0.280005] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.284044] Brought up 2 CPUs [ 0.288002] Total of 2 processors activated (12023.28 BogoMIPS). [ 0.292039] CPU0 attaching sched-domain: [ 0.292041] domain 0: span 0-1 level MC [ 0.292042] groups: 0 1 [ 0.292045] CPU1 attaching sched-domain: [ 0.292047] domain 0: span 0-1 level MC [ 0.292048] groups: 1 0 [ 0.292093] net_namespace: 1088 bytes [ 0.296021] Booting paravirtualized kernel on bare hardware [ 0.300097] regulator: core version 0.5 [ 0.304036] NET: Registered protocol family 16 [ 0.308016] ACPI: bus type pci registered [ 0.312022] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.316002] PCI: Not using MMCONFIG. [ 0.320129] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 0.324002] PCI: Using configuration type 1 for base access [ 0.328022] bio: create slab <bio-0> at 0 [ 0.332497] ACPI: EC: Look up EC in DSDT [ 0.343366] ACPI: Interpreter enabled [ 0.344006] ACPI: (supports S0 S1 S3 S4 S5) [ 0.354520] ACPI: Using IOAPIC for interrupt routing [ 0.356043] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.366068] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.368002] PCI: Using MMCONFIG for extended config space [ 0.382503] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 02, should be F5 [20090320] [ 0.392664] ACPI: No dock devices found. [ 0.396049] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.400040] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe600000-0xfe6fffff] [ 0.400046] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] [ 0.400049] pci 0000:00:02.0: reg 20 io port: [0xbc00-0xbc07] [ 0.400070] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe700000-0xfe7fffff] [ 0.400135] pci 0000:00:1a.0: reg 20 io port: [0xb480-0xb49f] [ 0.400187] pci 0000:00:1a.1: reg 20 io port: [0xb800-0xb81f] [ 0.400239] pci 0000:00:1a.2: reg 20 io port: [0xb880-0xb89f] [ 0.400295] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe5fbc00-0xfe5fbfff] [ 0.400337] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.404004] pci 0000:00:1a.7: PME# disabled [ 0.408044] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe5f4000-0xfe5f7fff] [ 0.408075] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.412006] pci 0000:00:1b.0: PME# disabled [ 0.416044] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.420004] pci 0000:00:1c.0: PME# disabled [ 0.424046] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.428003] pci 0000:00:1c.2: PME# disabled [ 0.432045] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.436003] pci 0000:00:1c.4: PME# disabled [ 0.440048] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.444003] pci 0000:00:1c.5: PME# disabled [ 0.448042] pci 0000:00:1d.0: reg 20 io port: [0xb000-0xb01f] [ 0.448094] pci 0000:00:1d.1: reg 20 io port: [0xb080-0xb09f] [ 0.448146] pci 0000:00:1d.2: reg 20 io port: [0xb400-0xb41f] [ 0.448203] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe5fb800-0xfe5fbbff] [ 0.448245] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.452004] pci 0000:00:1d.7: PME# disabled [ 0.460078] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.464004] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.468004] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.472051] pci 0000:00:1f.2: reg 10 io port: [0xa880-0xa887] [ 0.472055] pci 0000:00:1f.2: reg 14 io port: [0xa800-0xa803] [ 0.472059] pci 0000:00:1f.2: reg 18 io port: [0xa480-0xa487] [ 0.472064] pci 0000:00:1f.2: reg 1c io port: [0xa400-0xa403] [ 0.472068] pci 0000:00:1f.2: reg 20 io port: [0xa080-0xa09f] [ 0.472072] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe5fa800-0xfe5fafff] [ 0.472095] pci 0000:00:1f.2: PME# supported from D3hot [ 0.476003] pci 0000:00:1f.2: PME# disabled [ 0.480022] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe5fb400-0xfe5fb4ff] [ 0.480032] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.480078] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfde00000-0xfdefffff] [ 0.480155] pci 0000:03:00.0: reg 24 32bit mmio: [0xfeafe000-0xfeafffff] [ 0.480162] pci 0000:03:00.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.480189] pci 0000:03:00.0: PME# supported from D3hot [ 0.484006] pci 0000:03:00.0: PME# disabled [ 0.488047] pci 0000:03:00.1: reg 10 io port: [0xdc00-0xdc07] [ 0.488054] pci 0000:03:00.1: reg 14 io port: [0xd880-0xd883] [ 0.488062] pci 0000:03:00.1: reg 18 io port: [0xd800-0xd807] [ 0.488069] pci 0000:03:00.1: reg 1c io port: [0xd480-0xd483] [ 0.488077] pci 0000:03:00.1: reg 20 io port: [0xd400-0xd40f] [ 0.488150] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff] [ 0.488152] pci 0000:00:1c.2: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.488202] pci 0000:02:00.0: reg 10 io port: [0xcc00-0xcc07] [ 0.488210] pci 0000:02:00.0: reg 14 io port: [0xc880-0xc883] [ 0.488217] pci 0000:02:00.0: reg 18 io port: [0xc800-0xc807] [ 0.488225] pci 0000:02:00.0: reg 1c io port: [0xc480-0xc483] [ 0.488232] pci 0000:02:00.0: reg 20 io port: [0xc400-0xc40f] [ 0.488246] pci 0000:02:00.0: reg 30 32bit mmio: [0xfe9f0000-0xfe9fffff] [ 0.488309] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] [ 0.488312] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe900000-0xfe9fffff] [ 0.488357] pci 0000:01:00.0: reg 10 64bit mmio: [0xfe8c0000-0xfe8fffff] [ 0.488384] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe8a0000-0xfe8bffff] [ 0.488412] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 0.492005] pci 0000:01:00.0: PME# disabled [ 0.496038] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe800000-0xfe8fffff] [ 0.496072] pci 0000:05:00.0: reg 10 32bit mmio: [0xfdffe000-0xfdffefff] [ 0.496143] pci 0000:05:00.1: reg 10 32bit mmio: [0xfdfff000-0xfdffffff] [ 0.496205] pci 0000:05:01.0: reg 10 io port: [0xec00-0xec07] [ 0.496211] pci 0000:05:01.0: reg 14 io port: [0xe880-0xe887] [ 0.496216] pci 0000:05:01.0: reg 18 io port: [0xe800-0xe807] [ 0.496221] pci 0000:05:01.0: reg 1c io port: [0xe480-0xe487] [ 0.496227] pci 0000:05:01.0: reg 20 io port: [0xe400-0xe407] [ 0.496232] pci 0000:05:01.0: reg 24 io port: [0xe080-0xe08f] [ 0.496267] pci 0000:05:03.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff] [ 0.496272] pci 0000:05:03.0: reg 14 io port: [0xe000-0xe07f] [ 0.496307] pci 0000:05:03.0: supports D2 [ 0.496308] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold [ 0.500006] pci 0000:05:03.0: PME# disabled [ 0.504034] pci 0000:00:1e.0: transparent bridge [ 0.508004] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.508006] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.508011] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff] [ 0.508027] pci_bus 0000:00: on NUMA node 0 [ 0.508031] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.508137] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.508214] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.508258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 0.508303] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.508348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.524670] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.538661] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.548998] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.562089] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.572689] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.588686] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.604091] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.617829] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.631698] PCI: Using ACPI for IRQ routing [ 0.652012] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.659662] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.668009] Switched to high resolution mode on CPU 0 [ 0.668753] Switched to high resolution mode on CPU 1 [ 0.684004] pnp: PnP ACPI init [ 0.693178] ACPI: bus type pnp registered [ 0.708788] pnp: PnP ACPI: found 17 devices [ 0.721355] ACPI: ACPI bus type pnp unregistered [ 0.735209] PnPBIOS: Disabled by ACPI PNP [ 0.747821] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.769525] system 00:07: ioport range 0x290-0x297 has been reserved [ 0.788579] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.807631] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.826685] system 00:08: ioport range 0x480-0x4bf has been reserved [ 0.845740] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.867134] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.888528] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.909924] system 00:08: iomem range 0xffa00000-0xffafffff has been reserved [ 0.931318] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.952713] system 00:08: iomem range 0xffe00000-0xffefffff has been reserved [ 0.974107] system 00:08: iomem range 0xfff00000-0xfffffffe has been reserved [ 0.995502] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved [ 1.017157] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 1.038551] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved [ 1.059945] system 00:10: iomem range 0x0-0x9ffff could not be reserved [ 1.079777] system 00:10: iomem range 0xc0000-0xcffff could not be reserved [ 1.100652] system 00:10: iomem range 0xe0000-0xfffff could not be reserved [ 1.121527] system 00:10: iomem range 0x100000-0xcf7fffff could not be reserved [ 1.178211] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 1.195977] pci 0000:00:1c.0: IO window: disabled [ 1.210613] pci 0000:00:1c.0: MEM window: disabled [ 1.225508] pci 0000:00:1c.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff [ 1.248230] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 [ 1.266086] pci 0000:00:1c.2: IO window: 0xd000-0xdfff [ 1.282023] pci 0000:00:1c.2: MEM window: 0xfea00000-0xfeafffff [ 1.300297] pci 0000:00:1c.2: PREFETCH window: 0x000000f0000000-0x000000f00fffff [ 1.323019] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02 [ 1.340770] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 1.356707] pci 0000:00:1c.4: MEM window: 0xfe900000-0xfe9fffff [ 1.374981] pci 0000:00:1c.4: PREFETCH window: disabled [ 1.391179] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:01 [ 1.408930] pci 0000:00:1c.5: IO window: disabled [ 1.423567] pci 0000:00:1c.5: MEM window: 0xfe800000-0xfe8fffff [ 1.441842] pci 0000:00:1c.5: PREFETCH window: disabled [ 1.458040] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 1.475790] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 1.491728] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff [ 1.510002] pci 0000:00:1e.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff [ 1.532989] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.553102] pci 0000:00:1c.0: setting latency timer to 64 [ 1.553107] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.573196] pci 0000:00:1c.2: setting latency timer to 64 [ 1.573201] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.593291] pci 0000:00:1c.4: setting latency timer to 64 [ 1.593296] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.613385] pci 0000:00:1c.5: setting latency timer to 64 [ 1.613389] pci 0000:00:1e.0: setting latency timer to 64 [ 1.613392] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 1.613393] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 1.613395] pci_bus 0000:04: resource 2 pref mem [0xfde00000-0xfdefffff] [ 1.613397] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 1.613399] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff] [ 1.613400] pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf00fffff] [ 1.613402] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 1.613404] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff] [ 1.613406] pci_bus 0000:01: resource 1 mem: [0xfe800000-0xfe8fffff] [ 1.613407] pci_bus 0000:05: resource 0 io: [0xe000-0xefff] [ 1.613409] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff] [ 1.613411] pci_bus 0000:05: resource 2 pref mem [0xfdf00000-0xfdffffff] [ 1.613412] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 1.613414] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 1.613440] NET: Registered protocol family 2 [ 1.672056] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.693633] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.716058] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.736011] TCP: Hash tables configured (established 131072 bind 65536) [ 1.755839] TCP reno registered [ 1.776466] NET: Registered protocol family 1 [ 1.789580] Trying to unpack rootfs image as initramfs... [ 2.013597] Freeing initrd memory: 11022k freed [ 2.032539] audit: initializing netlink socket (disabled) [ 2.048740] type=2000 audit(1249058286.048:1): initialized [ 2.065520] highmem bounce pool size: 64 pages [ 2.078861] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.098121] VFS: Disk quotas dquot_6.5.2 [ 2.109912] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.129526] msgmni has been set to 1692 [ 2.141130] alg: No test for stdrng (krng) [ 2.153472] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.175664] io scheduler noop registered [ 2.187439] io scheduler anticipatory registered (default) [ 2.203894] io scheduler deadline registered [ 2.216717] io scheduler cfq registered [ 2.228235] pci 0000:00:02.0: Boot video device [ 2.228442] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 2.228452] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 2.228578] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X [ 2.228587] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 2.228713] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X [ 2.228722] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 2.228848] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X [ 2.228857] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 2.229100] isapnp: Scanning for PnP cards... [ 2.594872] isapnp: No Plug & Play device found [ 2.610098] Serial: 8250/16550 driver, 10 ports, IRQ sharing enabled [ 2.629245] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.647724] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.664563] serial 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.685509] 0000:05:01.0: ttyS4 at I/O 0xec00 (irq = 17) is a 16550A [ 2.704659] 0000:05:01.0: ttyS5 at I/O 0xe880 (irq = 17) is a 16550A [ 2.723818] 0000:05:01.0: ttyS6 at I/O 0xe800 (irq = 17) is a 16550A [ 2.742974] 0000:05:01.0: ttyS7 at I/O 0xe480 (irq = 17) is a 16550A [ 2.762134] 0000:05:01.0: ttyS8 at I/O 0xe400 (irq = 17) is a 16550A [ 2.781292] 0000:05:01.0: ttyS9 at I/O 0xe080 (irq = 17) is a 16550A [ 2.801200] brd: module loaded [ 2.810423] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 2.835753] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.850662] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.865864] mice: PS/2 mouse device common for all mice [ 2.881583] rtc_cmos 00:03: RTC can wake from S4 [ 2.895485] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 2.913798] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.934182] cpuidle: using governor ladder [ 2.946483] cpuidle: using governor menu [ 2.958260] No iBFT detected. [ 2.967371] TCP cubic registered [ 2.977099] NET: Registered protocol family 10 [ 2.990489] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.016490] lo: Disabled Privacy Extensions [ 3.029222] Mobile IPv6 [ 3.036583] NET: Registered protocol family 17 [ 3.049918] Using IPI No-Shortcut mode [ 3.061241] registered taskstats version 1 [ 3.073653] rtc_cmos 00:03: setting system clock to 2009-07-31 16:38:10 UTC (1249058290) [ 3.097959] Freeing unused kernel memory: 332k freed [ 3.113020] Write protecting the kernel text: 2220k [ 3.127682] Write protecting the kernel read-only data: 800k [ 3.214362] device-mapper: uevent: version 1.0.3 [ 3.228312] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 3.302791] Floppy drive(s): fd0 is 1.44M [ 3.314963] usbcore: registered new interface driver usbfs [ 3.317987] Linux agpgart interface v0.103 [ 3.319277] agpgart-intel 0000:00:00.0: Intel G35 Chipset [ 3.360819] usbcore: registered new interface driver hub [ 3.377937] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 3.381252] FDC 0 is a post-1991 82077 [ 3.408335] SCSI subsystem initialized [ 3.420737] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 3.442801] usbcore: registered new device driver usb [ 3.460459] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.480113] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.501532] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 3.501535] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.502067] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.507279] atl1 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.507286] atl1 0000:01:00.0: setting latency timer to 64 [ 3.507302] atl1 0000:01:00.0: version 2.1.3 [ 3.573152] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 3.599236] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.612847] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 3.612860] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe5fbc00 [ 3.633807] libata version 3.00 loaded. [ 3.634422] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) [ 3.653774] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.676256] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 3.696009] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI version 1.10 [ 3.705813] scsi0 : pata_jmicron [ 3.728122] scsi1 : pata_jmicron [ 3.737910] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19 [ 3.759321] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19 [ 3.780748] pata_jmicron 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.803233] pata_jmicron 0000:02:00.0: setting latency timer to 64 [ 3.803908] scsi2 : pata_jmicron [ 3.813677] scsi3 : pata_jmicron [ 3.813740] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 3.813756] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.813758] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.813759] usb usb1: Product: EHCI Host Controller [ 3.813761] usb usb1: Manufacturer: Linux 2.6.30-1-686-bigmem ehci_hcd [ 3.813762] usb usb1: SerialNumber: 0000:00:1a.7 [ 3.813799] usb usb1: configuration #1 chosen from 1 choice [ 3.813817] hub 1-0:1.0: USB hub found [ 3.813822] hub 1-0:1.0: 6 ports detected [ 3.840508] ahci 0000:00:1f.2: version 3.0 [ 3.840519] ahci 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 3.840561] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 3.840599] ahci: SSS flag set, parallel bus scan disabled [ 3.840640] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 3.840642] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems [ 3.840645] ahci 0000:00:1f.2: setting latency timer to 64 [ 3.924511] scsi4 : ahci [ 3.924597] scsi5 : ahci [ 3.924681] scsi6 : ahci [ 3.924762] scsi7 : ahci [ 3.924842] scsi8 : ahci [ 3.924924] scsi9 : ahci [ 3.925008] ata5: SATA max UDMA/133 abar m2048@0xfe5fa800 port 0xfe5fa900 irq 28 [ 3.925010] ata6: SATA max UDMA/133 abar m2048@0xfe5fa800 port 0xfe5fa980 irq 28 [ 3.925012] ata7: SATA max UDMA/133 abar m2048@0xfe5fa800 port 0xfe5faa00 irq 28 [ 3.925014] ata8: SATA max UDMA/133 abar m2048@0xfe5fa800 port 0xfe5faa80 irq 28 [ 3.925016] ata9: SATA max UDMA/133 abar m2048@0xfe5fa800 port 0xfe5fab00 irq 28 [ 3.925018] ata10: SATA max UDMA/133 abar m2048@0xfe5fa800 port 0xfe5fab80 irq 28 [ 3.925038] ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.925101] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3.925109] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3.925111] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.925127] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 3.929032] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.929037] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 3.929047] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe5fb800 [ 3.940547] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 3.940549] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 3.940555] ahci 0000:03:00.0: setting latency timer to 64 [ 3.940667] scsi10 : ahci [ 3.940753] scsi11 : ahci [ 3.940779] ata11: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 18 [ 3.940782] ata12: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 18 [ 3.944506] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 3.944516] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.944517] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.944519] usb usb2: Product: EHCI Host Controller [ 3.944520] usb usb2: Manufacturer: Linux 2.6.30-1-686-bigmem ehci_hcd [ 3.944521] usb usb2: SerialNumber: 0000:00:1d.7 [ 3.944552] usb usb2: configuration #1 chosen from 1 choice [ 3.944572] hub 2-0:1.0: USB hub found [ 3.944575] hub 2-0:1.0: 6 ports detected [ 4.005338] uhci_hcd: USB Universal Host Controller Interface driver [ 4.619833] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.625484] ata1.00: ATA-7: ST3320620A, 3.AAC, max UDMA/100 [ 4.625488] ata1.00: 625142448 sectors, multi 0: LBA48 [ 4.625735] firewire_core: created device fw0: GUID 001e8c00010b4c64, S400 [ 4.626569] ata3: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 16 [ 4.626572] ata4: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 16 [ 4.737220] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 4.737223] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.752964] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 4.775195] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b480 [ 4.787063] Uniform Multi-Platform E-IDE driver [ 4.790692] ata1.00: configured for UDMA/100 [ 4.790785] scsi 0:0:0:0: Direct-Access ATA ST3320620A 3.AA PQ: 0 ANSI: 5 [ 4.843175] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.863561] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.885266] usb usb3: Product: UHCI Host Controller [ 4.899928] usb usb3: Manufacturer: Linux 2.6.30-1-686-bigmem uhci_hcd [ 4.919527] usb usb3: SerialNumber: 0000:00:1a.0 [ 4.933439] usb usb3: configuration #1 chosen from 1 choice [ 4.937215] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-4082B, A209, max UDMA/33 [ 4.970315] hub 3-0:1.0: USB hub found [ 4.981582] hub 3-0:1.0: 2 ports detected [ 4.985227] ata3.00: configured for UDMA/33 [ 5.006264] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 5.027673] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 5.027675] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 5.043357] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 5.065566] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b800 [ 5.082824] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.103185] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.124870] usb usb4: Product: UHCI Host Controller [ 5.139501] usb usb4: Manufacturer: Linux 2.6.30-1-686-bigmem uhci_hcd [ 5.140024] ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.168736] ata12.00: ATA-8: ST31500341AS, CC1H, max UDMA/133 [ 5.168737] ata12.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.210731] ata12.00: configured for UDMA/133 [ 5.228795] usb usb4: SerialNumber: 0000:00:1a.1 [ 5.242678] usb usb4: configuration #1 chosen from 1 choice [ 5.259410] hub 4-0:1.0: USB hub found [ 5.270678] hub 4-0:1.0: 2 ports detected [ 5.282765] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.284025] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.312650] ata11.00: ATA-8: ST31500341AS, CC1G, max UDMA/133 [ 5.312652] ata11.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 5.354518] ata11.00: configured for UDMA/133 [ 5.373888] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 5.373890] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 5.389591] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 5.411793] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000b880 [ 5.429057] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.449419] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.471096] usb usb5: Product: UHCI Host Controller [ 5.485734] usb usb5: Manufacturer: Linux 2.6.30-1-686-bigmem uhci_hcd [ 5.505306] usb usb5: SerialNumber: 0000:00:1a.2 [ 5.519190] usb usb5: configuration #1 chosen from 1 choice [ 5.535922] hub 5-0:1.0: USB hub found [ 5.547188] hub 5-0:1.0: 2 ports detected [ 5.548010] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.577818] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.596678] ata5.00: ATA-7: ST3500630A, 3.AAF, max UDMA/100 [ 5.596679] ata5.00: 976773168 sectors, multi 0: LBA48 [ 5.596686] ata5.00: applying bridge limits [ 5.644194] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.644196] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.654950] ata5.00: configured for UDMA/100 [ 5.672703] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 5.676047] scsi 4:0:0:0: Direct-Access ATA ST3500630A 3.AA PQ: 0 ANSI: 5 [ 5.719188] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b000 [ 5.736451] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.756812] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.778492] usb usb6: Product: UHCI Host Controller [ 5.793129] usb usb6: Manufacturer: Linux 2.6.30-1-686-bigmem uhci_hcd [ 5.812702] usb usb6: SerialNumber: 0000:00:1d.0 [ 5.826585] usb usb6: configuration #1 chosen from 1 choice [ 5.843317] hub 6-0:1.0: USB hub found [ 5.854585] hub 6-0:1.0: 2 ports detected [ 5.866689] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.888092] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.888094] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.903780] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 5.925981] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b080 [ 5.943245] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.963607] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.985287] usb usb7: Product: UHCI Host Controller [ 5.999921] usb usb7: Manufacturer: Linux 2.6.30-1-686-bigmem uhci_hcd [ 6.019495] usb usb7: SerialNumber: 0000:00:1d.1 [ 6.033379] usb usb7: configuration #1 chosen from 1 choice [ 6.050109] hub 7-0:1.0: USB hub found [ 6.061378] hub 7-0:1.0: 2 ports detected [ 6.073470] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.094885] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 6.094888] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 6.110597] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 6.132799] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400 [ 6.150063] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 6.170425] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.192105] usb usb8: Product: UHCI Host Controller [ 6.206741] usb usb8: Manufacturer: Linux 2.6.30-1-686-bigmem uhci_hcd [ 6.226314] usb usb8: SerialNumber: 0000:00:1d.2 [ 6.240198] usb usb8: configuration #1 chosen from 1 choice [ 6.256930] hub 8-0:1.0: USB hub found [ 6.268197] hub 8-0:1.0: 2 ports detected [ 6.392507] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 6.544357] usb 1-1: New USB device found, idVendor=04b4, idProduct=6560 [ 6.564465] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.585905] usb 1-1: configuration #1 chosen from 1 choice [ 6.602490] hub 1-1:1.0: USB hub found [ 6.613969] hub 1-1:1.0: 4 ports detected [ 6.824010] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.889064] ata6.00: ATA-7: ST3500630A, 3.AAF, max UDMA/100 [ 6.905783] ata6.00: 976773168 sectors, multi 0: LBA48 [ 6.921463] ata6.00: applying bridge limits [ 6.963946] ata6.00: configured for UDMA/100 [ 6.992075] scsi 5:0:0:0: Direct-Access ATA ST3500630A 3.AA PQ: 0 ANSI: 5 [ 7.904012] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 7.924019] ata7.00: ATA-8: ST31500341AS, SD1B, max UDMA/133 [ 7.940997] ata7.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 7.963140] ata7.00: configured for UDMA/133 [ 7.988061] scsi 6:0:0:0: Direct-Access ATA ST31500341AS SD1B PQ: 0 ANSI: 5 [ 8.900010] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.947272] ata8.00: ATA-8: ST31500341AS, CC1G, max UDMA/133 [ 8.964254] ata8.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 9.026558] ata8.00: configured for UDMA/133 [ 9.052060] scsi 7:0:0:0: Direct-Access ATA ST31500341AS CC1G PQ: 0 ANSI: 5 [ 9.964009] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 10.011304] ata9.00: ATA-8: ST31500341AS, CC1H, max UDMA/133 [ 10.028297] ata9.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 10.090652] ata9.00: configured for UDMA/133 [ 10.116059] scsi 8:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5 [ 11.028009] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 11.048323] ata10.00: ATA-8: ST31500341AS, SD1B, max UDMA/133 [ 11.065563] ata10.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 11.087985] ata10.00: configured for UDMA/133 [ 11.116061] scsi 9:0:0:0: Direct-Access ATA ST31500341AS SD1B PQ: 0 ANSI: 5 [ 11.140438] scsi 10:0:0:0: Direct-Access ATA ST31500341AS CC1G PQ: 0 ANSI: 5 [ 11.165598] scsi 11:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5 [ 11.194618] Driver 'sd' needs updating - please use bus_type methods [ 11.195488] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4082B A209 PQ: 0 ANSI: 5 [ 11.238008] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 11.261056] sd 4:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 11.264509] sd 0:0:0:0: [sda] Write Protect is off [ 11.264510] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 11.264527] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.264580] sda:<5>sd 5:0:0:0: [sdc] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 11.332517] sd 4:0:0:0: [sdb] Write Protect is off [ 11.332519] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 11.332533] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.332577] sdb:<5>sd 6:0:0:0: [sdd] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB) [ 11.332621] sd 6:0:0:0: [sdd] Write Protect is off [ 11.332623] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 11.332634] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.332677] sdd:<5>sd 7:0:0:0: [sde] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB) [ 11.332823] sd 7:0:0:0: [sde] Write Protect is off [ 11.332824] sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 11.332836] sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.332879] sde:<5>sd 8:0:0:0: [sdf] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB) [ 11.332958] sd 8:0:0:0: [sdf] Write Protect is off [ 11.332959] sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 11.332971] sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.333014] sdf:<5>sd 9:0:0:0: [sdg] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB) [ 11.333093] sd 9:0:0:0: [sdg] Write Protect is off [ 11.333095] sd 9:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 11.333106] sd 9:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.333148] sdg:<5>sd 10:0:0:0: [sdh] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB) [ 11.333229] sd 10:0:0:0: [sdh] Write Protect is off [ 11.333231] sd 10:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 11.333242] sd 10:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.333285] sdh:<5>sd 11:0:0:0: [sdi] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB) [ 11.735124] sdb1 sdb2 sdb3 sdb4 < sdd1 [ 11.767558] sdb5 unknown partition table [ 11.772861] sd 6:0:0:0: [sdd] Attached SCSI disk [ 11.793542] sde1 [ 11.799429] sdb6<5>sd 7:0:0:0: [sde] Attached SCSI disk [ 11.815427] sdf1 [ 11.821338] sd 0:0:0:0: [sda] Attached SCSI disk [ 11.821347] sd 8:0:0:0: [sdf] Attached SCSI disk [ 11.821357] sdg1 [ 11.854865] sdh1 [ 11.860753] sdb7<5>sd 11:0:0:0: [sdi] Write Protect is off [ 11.866046] sd 10:0:0:0: [sdh] Attached SCSI disk [ 11.866077] sd 9:0:0:0: [sdg] Attached SCSI disk [ 11.905504] sd 11:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 11.905515] sdb8 > [ 11.912132] sd 4:0:0:0: [sdb] Attached SCSI disk [ 11.925998] sd 11:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.953426] sdi:<5>sd 5:0:0:0: [sdc] Write Protect is off [ 11.969942] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 11.969955] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 11.997115] sdi1 [ 12.003026] sd 11:0:0:0: [sdi] Attached SCSI disk [ 12.017181] sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 > [ 12.110810] sd 5:0:0:0: [sdc] Attached SCSI disk [ 12.153216] Driver 'sr' needs updating - please use bus_type methods [ 12.189024] sr0: scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray [ 12.211501] Uniform CD-ROM driver Revision: 3.20 [ 12.225463] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 12.233878] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 12.249916] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 12.265984] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 12.281956] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 12.297979] sd 7:0:0:0: Attached scsi generic sg4 type 0 [ 12.313957] sd 8:0:0:0: Attached scsi generic sg5 type 0 [ 12.329966] sd 9:0:0:0: Attached scsi generic sg6 type 0 [ 12.345973] sd 10:0:0:0: Attached scsi generic sg7 type 0 [ 12.362241] sd 11:0:0:0: Attached scsi generic sg8 type 0 [ 12.378461] sr 2:0:0:0: Attached scsi generic sg9 type 5 [ 12.634860] atl1 0000:01:00.0: irq 29 for MSI/MSI-X [ 12.634959] atl1 0000:01:00.0: eth0 link is up 100 Mbps full duplex [ 13.353083] md: raid1 personality registered for level 1 [ 13.560545] md: md0 stopped. [ 13.571543] md: bind<sdc1> [ 13.599485] md: bind<sdb1> [ 13.608468] raid1: raid set md0 active with 2 out of 3 mirrors [ 13.631423] md0: [ 13.672331] atl1 0000:01:00.0: irq 29 for MSI/MSI-X [ 13.672381] atl1 0000:01:00.0: eth0 link is up 100 Mbps full duplex [ 13.701320] md: md1 stopped. [ 13.722613] md: bind<sdc2> [ 13.730915] md: bind<sdb2> [ 13.739918] raid1: raid set md1 active with 2 out of 3 mirrors [ 13.758125] md1: detected capacity change from 0 to 1003356160 [ 13.775632] md1: unknown partition table [ 13.967415] md: md2 stopped. [ 13.988406] md: bind<sdc3> [ 14.004628] md: bind<sdb3> [ 14.013622] raid1: raid set md2 active with 2 out of 3 mirrors [ 14.031825] md2: detected capacity change from 0 to 8496611328 [ 14.049337] md2: unknown partition table [ 44.890178] PM: Starting manual resume from disk [ 47.885805] udev: starting version 141 [ 48.014330] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 48.036579] ACPI: Power Button [PWRF] [ 48.047698] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 48.072256] ACPI: Power Button [PWRB] [ 48.093814] ACPI: SSDT cf790100 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 48.117733] processor ACPI_CPU:00: registered as cooling_device0 [ 48.136799] ACPI: SSDT cf7902e0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 48.173697] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 48.197310] processor ACPI_CPU:01: registered as cooling_device1 [ 48.235446] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 48.283169] parport_pc 00:0b: reported by Plug and Play ACPI [ 48.300285] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP] [ 48.323102] ppdev: user-space parallel port driver [ 48.554944] Linux video capture interface: v2.00 [ 48.880972] Bt87x 0000:05:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 48.901688] bt87x0: Using board 1, analog, digital (rate 32000 Hz) [ 48.929503] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 48.951220] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 48.957635] bttv: driver version 0.9.18 loaded [ 48.970985] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 48.991381] bttv: Bt8xx card found (0). [ 49.002905] bttv 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 49.023299] bttv0: Bt878 (rev 17) at 0000:05:00.0, irq: 16, latency: 64, mmio: 0xfdffe000 [ 49.048466] bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 49.071996] bttv0: using: Hauppauge (bt878) [card=10,autodetected] [ 49.090558] IRQ 16/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs [ 49.110678] bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init] [ 49.113160] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 49.161622] tveeprom 1-0050: Hauppauge model 44354, rev C121, serial# 2268107 [ 49.183031] tveeprom 1-0050: tuner model is Philips FM1216 (idx 21, type 5) [ 49.203936] tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04) [ 49.221973] tveeprom 1-0050: audio processor is MSP3415 (idx 6) [ 49.239763] tveeprom 1-0050: has radio [ 49.251032] bttv0: Hauppauge eeprom indicates model#44354 [ 49.251028] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 49.289189] bttv0: tuner type=5 [ 49.299390] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4 [ 49.312294] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 49.366635] tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw]) [ 49.457290] tuner-simple 1-0061: creating new instance [ 49.472711] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) [ 49.536639] msp3400 1-0040: MSP3415D-B3 found @ 0x80 (bt878 #0 [sw]) [ 49.555687] msp3400 1-0040: msp3400 supports nicam, mode is autodetect [ 49.575511] bttv0: registered device video0 [ 49.588090] bttv0: registered device vbi0 [ 49.600127] bttv0: registered device radio0 [ 49.621522] bttv0: PLL: 28636363 => 35468950 .. ok [ 51.471482] BIOS EDD facility v0.16 2004-Jun-25, 8 devices found [ 51.499189] i2c /dev entries driver [ 51.548723] w83627ehf: Found W83627DHG chip at 0x290 [ 51.592787] coretemp coretemp.0: Using relative temperature scale! [ 51.611347] coretemp coretemp.1: Using relative temperature scale! [ 52.628187] md: md3 stopped. [ 52.671498] md: bind<sdc5> [ 52.679806] md: bind<sdb5> [ 52.727513] raid1: raid set md3 active with 2 out of 3 mirrors [ 52.764136] md3: bitmap initialized from disk: read 15/15 pages, set 152363 bits [ 52.786340] created bitmap (224 pages) for device md3 [ 52.813916] md3: unknown partition table [ 53.134606] md: md4 stopped. [ 53.153914] md: bind<sdc6> [ 53.162202] md: bind<sdb6> [ 53.171178] raid1: raid set md4 active with 2 out of 3 mirrors [ 53.197908] md4: bitmap initialized from disk: read 10/10 pages, set 42377 bits [ 53.219840] created bitmap (150 pages) for device md4 [ 53.245879] md4: unknown partition table [ 53.599623] md: md5 stopped. [ 53.614053] md: bind<sdc7> [ 53.634904] md: bind<sdb7> [ 53.643868] raid1: raid set md5 active with 2 out of 3 mirrors [ 53.671361] md5: bitmap initialized from disk: read 9/9 pages, set 62963 bits [ 53.692777] created bitmap (140 pages) for device md5 [ 53.714400] md5: unknown partition table [ 54.030856] md: md6 stopped. [ 54.045510] md: bind<sdc8> [ 54.076024] md: bind<sdb8> [ 54.085056] raid1: raid set md6 active with 2 out of 3 mirrors [ 54.126543] md6: bitmap initialized from disk: read 15/15 pages, set 228570 bits [ 54.148734] created bitmap (224 pages) for device md6 [ 54.181070] md6: unknown partition table [ 54.504178] md: md7 stopped. [ 54.518090] md: bind<sdg1> [ 54.526461] md: bind<sde1> [ 54.534884] md: bind<sdh1> [ 54.543451] md: bind<sdf1> [ 54.552077] md: bind<sdi1> [ 54.560445] md: bind<sdd1> [ 54.568609] md: kicking non-fresh sdi1 from array! [ 54.582987] md: unbind<sdi1> [ 54.604006] md: export_rdev(sdi1) [ 54.613972] md: kicking non-fresh sdh1 from array! [ 54.628349] md: unbind<sdh1> [ 54.652004] md: export_rdev(sdh1) [ 54.661960] md: kicking non-fresh sdg1 from array! [ 54.676337] md: unbind<sdg1> [ 54.700004] md: export_rdev(sdg1) [ 54.719404] md: raid10 personality registered for level 10 [ 54.736025] raid10: raid set md7 active with 3 out of 6 devices [ 54.760832] md7: bitmap initialized from disk: read 9/9 pages, set 131 bits [ 54.781720] created bitmap (131 pages) for device md7 [ 54.830746] md7: unknown partition table [ 73.628761] fuse init (API version 7.11) [ 73.809164] kjournald starting. Commit interval 5 seconds [ 73.848529] EXT3 FS on dm-2, internal journal [ 73.861673] EXT3-fs: mounted filesystem with ordered data mode. [ 73.953392] kjournald starting. Commit interval 5 seconds [ 74.008108] EXT3 FS on dm-3, internal journal [ 74.021259] EXT3-fs: mounted filesystem with ordered data mode. [ 74.119007] kjournald starting. Commit interval 5 seconds [ 74.284327] EXT3 FS on dm-4, internal journal [ 74.297491] EXT3-fs: mounted filesystem with ordered data mode. [ 74.632190] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 74.661093] SGI XFS Quota Management subsystem [ 74.744801] XFS mounting filesystem dm-6 [ 75.092861] Ending clean XFS mount for filesystem: dm-6 [ 75.430839] Adding 8296436k swap on /dev/mapper/md2. Priority:-1 extents:1 across:8296436k [ 77.492742] NET: Registered protocol family 15 [ 77.546449] alg: No test for cipher_null (cipher_null-generic) [ 77.563973] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 77.581758] alg: No test for digest_null (digest_null-generic) [ 77.599274] alg: No test for compress_null (compress_null-generic) [ 77.685424] padlock: VIA PadLock Hash Engine not detected. [ 77.729532] padlock: VIA PadLock Hash Engine not detected. [ 87.726025] alg: No test for stdrng (ansi_cprng) [ 87.773053] alg: No test for fcrypt (fcrypt-generic) [ 87.809098] xor: automatically using best checksumming function: pIII_sse [ 87.848502] pIII_sse : 11191.000 MB/sec [ 87.861065] xor: using function: pIII_sse (11191.000 MB/sec) [ 88.028054] Initializing XFRM netlink socket [ 90.108601] platform microcode: firmware: requesting intel-ucode/06-17-06 [ 90.201331] platform microcode: firmware: requesting intel-ucode/06-17-06 [ 90.223040] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 90.586498] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 90.603304] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860) [ 90.623982] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 116.354400] ip_tables: (C) 2000-2006 Netfilter Core Team [ 118.392195] NET: Registered protocol family 4 [ 147.604212] [drm] Initialized drm 1.1.0 20060810 [ 147.678998] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 147.699066] pci 0000:00:02.0: setting latency timer to 64 [ 147.701822] pci 0000:00:02.0: irq 30 for MSI/MSI-X [ 147.701901] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
MPlayer dev-SVN-r29417Can't open joystick device /dev/input/js0: No such file or directory Can't init input joystick Playing /tmp/DNsypPg8Ww8.flv. libavformat file format detected. [lavf] Video stream found, -vid 0 [lavf] Audio stream found, -aid 1 VIDEO: [FLV1] 320x240 0bpp 15.000 fps 228.2 kbps (27.9 kbyte/s) ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffflv] vfm: ffmpeg (FFmpeg Flash video) ========================================================================== ========================================================================== Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 AUDIO: 22050 Hz, 2 ch, s16le, 64.0 kbit/9.07% (ratio: 8000->88200) Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3) ========================================================================== AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... VDec: vo config request - 320 x 240 (preferred colorspace: Planar YV12) VDec: using Planar YV12 as output csp (no 0) Movie-Aspect is undefined - no prescaling applied. VO: [xv] 320x240 => 320x240 Planar YV12 A: 0.0 V: 0.0 A-V: 0.040 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0 [J A: 0.1 V: 0.1 A-V: 0.000 ct: 0.000 0/ 0 ??% ??% ??,?% 0 0 [J
Attachment:
signature.asc
Description: Digital signature