--- Begin Message ---
Package: xserver-xorg
Version: 1:7.4+3
Severity: important
After the upgrade of several packages to unstable, X now sends
incorrect keycodes, more precisely it seems to send keycodes
that correspond to /usr/share/X11/xkb/keycodes/evdev instead
of the usual /usr/share/X11/xkb/keycodes/xfree86, so that the
keyboard is hardly usable[*]. Since such a change has not been
announced in any NEWS file, I assume that it is not done on
purpose and is a bug.
[*] maybe due to my xmodmaprc.
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 2009-06-04 16:13:46 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1867152 2009-06-23 20:29:41 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: nVidia Corporation G98M [Quadro NVS 160M] (rev a1)
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1466 2009-06-09 07:48:08 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
# Touchpad: disable tapping.
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "AlwaysCore"
Option "Protocol" "auto-dev"
Option "MaxTapTime" "0"
Option "SHMConfig" "true"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "nv"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Synaptics Touchpad"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 25413 2009-07-01 00:26:40 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-dsa-amd64 x86_64 Debian
Current Operating System: Linux xvii 2.6.30-1-amd64 #1 SMP Sun Jun 14 15:00:29 UTC 2009 x86_64
Build Date: 23 June 2009 06:28:59PM
xorg-server 2:1.6.1.901-3 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 1 00:26:33 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(**) |-->Input Device "Synaptics Touchpad"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3b40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:06eb:1028:0233 nVidia Corporation G98M [Quadro NVS 160M] rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf2000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.1.13
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
(II) Primary Device is: PCI 01@00:00:0
(--) NV: Found NVIDIA Quadro NVS 160M at 01@00:00:0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Console is VGA mode 0x3
(II) NV(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(==) NV(0): Using hardware cursor
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): MMIO registers mapped at 0x7f43fde61000
(--) NV(0): Total video RAM: 256.0 MB
(--) NV(0): BAR1 size: 256.0 MB
(--) NV(0): Mapped memory: 255.0 MB
(II) NV(0): Linear framebuffer mapped at 0x7f43edf61000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) NV(0): Connector map:
(--) NV(0): Bus 3 -> SOR0 (LVDS)
(--) NV(0): Bus 0 -> DAC1
(--) NV(0): Bus 1 -> SOR2
(--) NV(0): Bus 2 -> SOR1
(--) NV(0): Load detection: 295
(II) NV(0): I2C bus "I2C0" initialized.
(II) NV(0): Output VGA1 using monitor section Configured Monitor
(II) NV(0): I2C bus "I2C1" initialized.
(II) NV(0): Output DVI2 has no monitor section
(II) NV(0): I2C bus "I2C2" initialized.
(II) NV(0): Output DVI1 has no monitor section
(II) NV(0): LVDS native size 1440x900
(II) NV(0): Output LVDS has no monitor section
(II) NV(0): I2C bus "I2C3 (LVDS)" initialized.
(II) NV(0): Probing for EDID on I2C bus 0...
(II) NV(0): I2C device "I2C0:E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
(II) NV(0): ... none found
(--) NV(0): Trying load detection on VGA1 ... nothing.
(II) NV(0): EDID for output VGA1
(II) NV(0): Probing for EDID on I2C bus 1...
(II) NV(0): I2C device "I2C1:E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "I2C1:ddc2" registered at address 0xA0.
(II) NV(0): ... none found
(II) NV(0): EDID for output DVI2
(II) NV(0): Probing for EDID on I2C bus 2...
(II) NV(0): I2C device "I2C2:E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "I2C2:ddc2" registered at address 0xA0.
(II) NV(0): ... none found
(II) NV(0): EDID for output DVI1
(II) NV(0): Probing for EDID on I2C bus 3...
(II) NV(0): I2C device "I2C3 (LVDS):E-EDID segment register" registered at address 0x60.
(II) NV(0): I2C device "I2C3 (LVDS):ddc2" registered at address 0xA0.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: AUO Model: 4047 Serial#: 0
(II) NV(0): Year: 2007 Week: 1
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 30 vert.: 19
(II) NV(0): Gamma: 2.20
(II) NV(0): No DPMS capabilities specified
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.580 redY: 0.340 greenX: 0.330 greenY: 0.575
(II) NV(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz Image Size: 303 x 189 mm
(II) NV(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1970 h_border: 0
(II) NV(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 72.5 MHz Image Size: 303 x 189 mm
(II) NV(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1970 h_border: 0
(II) NV(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
(II) NV(0): GX968�B141PW4
(WW) NV(0): Unknown vendor-specific block 0
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff0006af474000000000
(II) NV(0): 01110103901e13780a89e59457549327
(II) NV(0): 22505400000001010101010101010101
(II) NV(0): 010101010101302aa01252840c304020
(II) NV(0): 33002fbd1000001a521ca01252840c30
(II) NV(0): 402033002fbd1000001a000000fe0047
(II) NV(0): 58393638804231343150573400000000
(II) NV(0): 00000000000000000002010a202000ce
(II) NV(0): EDID for output LVDS
(II) NV(0): Manufacturer: AUO Model: 4047 Serial#: 0
(II) NV(0): Year: 2007 Week: 1
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 30 vert.: 19
(II) NV(0): Gamma: 2.20
(II) NV(0): No DPMS capabilities specified
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.580 redY: 0.340 greenX: 0.330 greenY: 0.575
(II) NV(0): blueX: 0.155 blueY: 0.135 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz Image Size: 303 x 189 mm
(II) NV(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1970 h_border: 0
(II) NV(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 72.5 MHz Image Size: 303 x 189 mm
(II) NV(0): h_active: 1440 h_sync: 1504 h_sync_end 1536 h_blank_end 1970 h_border: 0
(II) NV(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
(II) NV(0): GX968�B141PW4
(WW) NV(0): Unknown vendor-specific block 0
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff0006af474000000000
(II) NV(0): 01110103901e13780a89e59457549327
(II) NV(0): 22505400000001010101010101010101
(II) NV(0): 010101010101302aa01252840c304020
(II) NV(0): 33002fbd1000001a521ca01252840c30
(II) NV(0): 402033002fbd1000001a000000fe0047
(II) NV(0): 58393638804231343150573400000000
(II) NV(0): 00000000000000000002010a202000ce
(II) NV(0): EDID vendor "AUO", prod id 16455
(II) NV(0): Printing probed modes for output LVDS
(II) NV(0): Modeline "1440x900"x60.1 108.00 1440 1504 1536 1970 900 903 906 912 +hsync -vsync (54.8 kHz)
(II) NV(0): Modeline "1440x900"x40.4 72.50 1440 1504 1536 1970 900 903 906 912 +hsync -vsync (36.8 kHz)
(II) NV(0): Output VGA1 disconnected
(II) NV(0): Output DVI2 disconnected
(II) NV(0): Output DVI1 disconnected
(II) NV(0): Output LVDS connected
(II) NV(0): Using exact sizes for initial modes
(II) NV(0): Output LVDS using initial mode 1440x900
(--) NV(0): Virtual size is 1440x1440 (pitch 1536)
(**) NV(0): Driver mode "1440x900": 108.0 MHz (scaled from 0.0 MHz), 54.8 kHz, 60.1 Hz
(II) NV(0): Modeline "1440x900"x60.1 108.00 1440 1504 1536 1970 900 903 906 912 +hsync -vsync (54.8 kHz)
(**) NV(0): Driver mode "1440x900": 72.5 MHz (scaled from 0.0 MHz), 36.8 kHz, 40.4 Hz
(II) NV(0): Modeline "1440x900"x40.4 72.50 1440 1504 1536 1970 900 903 906 912 +hsync -vsync (36.8 kHz)
(==) NV(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(--) NV(0): 183.56 MB available for offscreen pixmaps
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(II) NV(0): DPMS enabled
(II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NV(0): Setting screen physical size to 303 x 189
(II) Synaptics touchpad driver version 1.1.2
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event11
(**) Option "Device" "/dev/input/event11"
(II) Synaptics Touchpad: x-axis range 0 - 1023
(II) Synaptics Touchpad: y-axis range 0 - 767
(II) Synaptics Touchpad: pressure range 0 - 127
(II) Synaptics Touchpad: finger width range 0 - 0
(II) Synaptics Touchpad: buttons: left right middle
(**) Option "SHMConfig" "true"
(**) Option "MaxTapTime" "0"
(--) Synaptics Touchpad: touchpad found
(**) Option "AlwaysCore"
(**) Synaptics Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: TOUCHPAD)
(**) Synaptics Touchpad: (accel) keeping acceleration scheme 1
(**) Synaptics Touchpad: (accel) filter chain progression: 2.00
(**) Synaptics Touchpad: (accel) filter stage 0: 20.00 ms
(**) Synaptics Touchpad: (accel) set acceleration profile 0
(--) Synaptics Touchpad: touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event2"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device HID 413c:8157
(**) HID 413c:8157: always reports core events
(**) HID 413c:8157: Device: "/dev/input/event3"
(II) HID 413c:8157: Found keys
(II) HID 413c:8157: Configuring as keyboard
(II) XINPUT: Adding extended input device "HID 413c:8157" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device AlpsPS/2 ALPS DualPoint TouchPad
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event11"
(II) AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767
(II) AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
(II) AlpsPS/2 ALPS DualPoint TouchPad: finger width range 0 - 0
(II) AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) filter chain progression: 2.00
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) filter stage 0: 20.00 ms
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) set acceleration profile 0
(WW) AlpsPS/2 ALPS DualPoint TouchPad can't grab event device, errno=16
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(II) config/hal: Adding input device DualPoint Stick
(**) DualPoint Stick: always reports core events
(**) DualPoint Stick: Device: "/dev/input/event10"
(II) DualPoint Stick: Found 3 mouse buttons
(II) DualPoint Stick: Found x and y relative axes
(II) DualPoint Stick: Configuring as mouse
(**) DualPoint Stick: YAxisMapping: buttons 4 and 5
(**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE)
(**) DualPoint Stick: (accel) keeping acceleration scheme 1
(**) DualPoint Stick: (accel) filter chain progression: 2.00
(**) DualPoint Stick: (accel) filter stage 0: 20.00 ms
(**) DualPoint Stick: (accel) set acceleration profile 0
HAL Information (lshal):
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Video Bus' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input' (string)
input.device = '/dev/input/event2' (string)
input.product = 'Video Bus' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'gb' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event2' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:34/device:35/input/input2/event2' (string)
udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2'
access_control.file = '/dev/input/event0' (string)
access_control.type = 'mouse' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/computer' (string)
info.product = 'Macintosh mouse button emulation' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/computer_logicaldev_input_2' (string)
input.device = '/dev/input/event0' (string)
input.product = 'Macintosh mouse button emulation' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event0' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/virtual/input/input0/event0' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input'
access_control.file = '/dev/input/event10' (string)
access_control.type = 'mouse' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'input', 'input.mouse', 'access_control'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
info.product = 'DualPoint Stick' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input' (string)
input.device = '/dev/input/event10' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
input.product = 'DualPoint Stick' (string)
input.x11_driver = 'evdev' (string)
linux.device_file = '/dev/input/event10' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input10/event10' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input_0'
access_control.file = '/dev/input/event11' (string)
access_control.type = 'mouse' (string)
info.callouts.add = {'hal-acl-tool --add-device'} (string list)
info.callouts.remove = {'hal-acl-tool --remove-device'} (string list)
info.capabilities = {'input', 'input.mouse', 'input.touchpad', 'access_control'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
info.product = 'AlpsPS/2 ALPS DualPoint TouchPad' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port_logicaldev_input_0' (string)
input.device = '/dev/input/event11' (string)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX_port' (string)
input.product = 'AlpsPS/2 ALPS DualPoint TouchPad' (string)
input.x11_driver = 'synaptics' (string)
linux.device_file = '/dev/input/event11' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio1/input/input11/event11' (string)
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'hal-setup-keymap', 'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'input.keymap', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
info.product = 'AT Translated Set 2 keyboard' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port_logicaldev_input' (string)
input.device = '/dev/input/event1' (string)
input.keymap.data = {'e001:playpause', 'e002:stopcd', 'e003:previoussong', 'e004:nextsong', 'e005:brightnessdown', 'e006:brightnessup', 'e007:battery', 'e008:wlan', 'e009:ejectclosecd', 'e00a:suspend', 'e00b:switchvideomode', 'e00f:switchvideomode', 'e010:previoussong', 'e011:prog1', 'e012:media', 'e013:f23', 'e015:camera', 'e00c:f23', 'e019:nextsong', 'e01b:switchvideomode', 'e022:playpause', 'e024:stopcd', 'e06d:media'} (string list)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_KBD_port' (string)
input.product = 'AT Translated Set 2 keyboard' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'gb' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event1' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/platform/i8042/serio0/input/input1/event1' (string)
udi = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0_logicaldev_input'
info.addons.singleton = {'hald-addon-input'} (string list)
info.callouts.add = {'debian-setup-keyboard'} (string list)
info.capabilities = {'input', 'input.keyboard', 'input.keypad', 'input.keys', 'button'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0' (string)
info.product = 'HID 413c:8157' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0_logicaldev_input' (string)
input.device = '/dev/input/event3' (string)
input.originating_device = '/org/freedesktop/Hal/devices/usb_device_413c_8157_noserial_if0' (string)
input.product = 'HID 413c:8157' (string)
input.x11_driver = 'evdev' (string)
input.xkb.layout = 'gb' (string)
input.xkb.model = 'pc105' (string)
input.xkb.options = 'lv3:ralt_switch' (string)
input.xkb.rules = 'base' (string)
linux.device_file = '/dev/input/event3' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input3/event3' (string)
DRM Information from dmesg:
[ 0.004000] No AGP bridge found
[ 0.350230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.742751] Linux agpgart interface v0.103
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=POSIX, LC_CTYPE=en_US.ISO8859-1 (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages xserver-xorg depends on:
ii console-set 1.36 console font and keymap setup prog
ii hal 0.5.12~git20090406.46dc48-2 Hardware Abstraction Layer
ii libc6 2.9-18 GNU C Library: Shared libraries
ii x11-xkb-uti 7.4+2 X11 XKB utilities
ii xkb-data 1.6-1 X Keyboard Extension (XKB) configu
ii xserver-xor 2:1.6.1.901-3 Xorg X server - core server
ii xserver-xor 1:7.4+3 the X.Org X server -- input driver
ii xserver-xor 1:2.2.2-1 X.Org X server -- evdev input driv
ii xserver-xor 1:1.3.2-3 X.Org X server -- keyboard input d
ii xserver-xor 1:1.4.0-2 X.Org X server -- mouse input driv
ii xserver-xor 1.1.2-1 Synaptics TouchPad driver for X.Or
ii xserver-xor 0.8.3.2-1 X.Org X server -- Wacom input driv
ii xserver-xor 1:7.4+3 the X.Org X server -- output drive
ii xserver-xor 1:1.2.1-2 X.Org X server -- APM display driv
ii xserver-xor 1:0.7.1-2 X.Org X server -- ark display driv
ii xserver-xor 1:1.2.1-2 X.Org X server -- Chips display dr
ii xserver-xor 1:1.3.0-1 X.Org X server -- Cirrus display d
ii xserver-xor 1:0.3.1-2 X.Org X server -- dummy display dr
ii xserver-xor 1:0.4.0-4 X.Org X server -- fbdev display dr
ii xserver-xor 1:1.2.2-2 X.Org X server -- Glint display dr
ii xserver-xor 1:1.3.1-3 X.Org X server -- i128 display dri
ii xserver-xor 2:2.7.1-1 X.Org X server -- Intel i8xx, i9xx
ii xserver-xor 6.8.0+git20090201.d394e0b8-2 X.Org X server -- ATI Mach64 displ
ii xserver-xor 1:1.4.10.dfsg-1 X.Org X server -- MGA display driv
ii xserver-xor 1:1.2.2-2 X.Org X server -- Neomagic display
ii xserver-xor 1:2.1.13-1 X.Org X server -- NV display drive
ii xserver-xor 1:0.2.903+svn741-1+b1 X.Org X server -- VIA display driv
ii xserver-xor 6.8.0+git20090201.08d56c88-2 X.Org X server -- ATI r128 display
ii xserver-xor 1:6.12.2-2 X.Org X server -- ATI Radeon displ
ii xserver-xor 1.2.5-1 X.Org X server -- AMD/ATI r5xx, r6
ii xserver-xor 1:4.2.1-1 X.Org X server -- Rendition displa
ii xserver-xor 1:0.6.1-2 X.Org X server -- legacy S3 displa
ii xserver-xor 1:1.10.2-2 X.Org X server -- S3 ViRGE display
ii xserver-xor 1:2.2.1-5 X.Org X server -- Savage display d
ii xserver-xor 1:1.7.1-1 X.Org X server -- SiliconMotion di
ii xserver-xor 1:0.10.1-2 X.Org X server -- SiS display driv
ii xserver-xor 1:0.9.1-1 X.Org X server -- SiS USB display
ii xserver-xor 1:1.4.1-1 X.Org X server -- tdfx display dri
ii xserver-xor 1:1.2.0-1 X.Org X server -- TGA display driv
ii xserver-xor 1:1.3.1-1 X.Org X server -- Trident display
ii xserver-xor 1:1.2.1-1 X.Org X server -- Tseng display dr
ii xserver-xor 0.2.0-3 X.Org X server -- Video 4 Linux di
ii xserver-xor 1:2.2.0-1 X.Org X server -- VESA display dri
ii xserver-xor 1:10.16.6-1 X.Org X server -- VMware display d
ii xserver-xor 1:1.2.1-1 X.Org X server -- Voodoo display d
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 7.4.4-1 A free implementation of the OpenG
ii udev 0.141-1 /dev/ and hotplug management daemo
xserver-xorg suggests no packages.
-- no debconf information
--- End Message ---