Bug#530297: xserver-xorg-video-trident: Completely blank screen and 99% CPU usage with trident driver on CyberBlade i1 card
I seem to have found two ways to work around the problem.
If I:
1) Compile and install a version of xserver-xorg-video-trident with the
two lines in WAITFORVSYNC commented out.
2) Start the computer normally, so that gdm starts. At this point, I just
get a blank screen which is seemingly unresponsive.
3) Switch to a text VT (which shows up)
4) Switch back to VT7
then I actually get a normal, functioning gdm login. Granted, it is
800x600 and not 1024x768 like it should be, but it works! From the
Xorg.0.log (attached), X is actually detecting my LCD screen as 1024x768,
but disposes of all of the modelines for 1024x768 for various reasons. I
thought that this might have to do with the amount of RAM allocated to be
video RAM, so I set the BIOS to allocate 8 MB. However, the problem
remains.
In an attempt to fix the resolution, I changed my xorg.conf to have
Section "Monitor"
Identifier "Configured Monitor"
HorizSync 28-51
VertRefresh 43-60
EndSection
and I have found that this fixes the problem completely, even with the
unmodified version of xserver-xorg-video-trident in unstable, giving me
the correct resolution.
I guess the bug here is that X misdetects the parameters of my LCD and
this causes the trident driver to: 1) put the screen in a blank state
where none of the above measures work and the only way to fix it is to
reboot, and then 2) spin endlessly.
Here's everything I could think of regarding autodetection data:
paul:~# get-edid |parse-edid
parse-edid: parse-edid version 1.4.1
get-edid: get-edid version 1.4.1
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 102
VBE string at 0xc0056 "Copyright 1998 TRIDENT MICROSYSTEMS INC."
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination does not support DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call failed
The EDID data should not be trusted as the VBE call failed
Error: output block unchanged
parse-edid: IO error reading EDID
paul:~# ddcprobe
vbe: VESA 1.2 detected.
oem: Copyright 1998 TRIDENT MICROSYSTEMS INC.
memory: 8192kb
mode: 1024x768x16m
mode: 640x480x16m
mode: 800x600x16m
mode: 1024x768x32k
mode: 1024x768x64k
mode: 800x600x32k
mode: 800x600x64k
mode: 640x480x32k
mode: 640x480x64k
mode: 1024x768x256
mode: 640x400x256
mode: 640x480x256
mode: 800x600x256
mode: 1024x768x16
mode: 800x600x16
edid:
edidfail
paul:~# xresprobe trident
id:
res: 1024x768
freq:
disptype: lcd/lvds
Thanks,
-Brian Pike
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-686 i686 Debian
Current Operating System: Linux paul 2.6.26-2-686 #1 SMP Mon May 11 19:00:59 UTC 2009 i686
Build Date: 14 May 2009 05:49:41PM
xorg-server 2:1.6.1.901-2 (jcristau@debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 23 22:02:26 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x6c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) Trident Microsystems CyberBlade i1 rev 106, Mem @ 0xf5000000/8388608, 0xf4100000/131072, 0xf4800000/8388608, BIOS @ 0x????????/65536
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched trident from file name trident.ids
(==) Matched trident for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "trident"
(II) Loading /usr/lib/xorg/modules/drivers//trident_drv.so
(II) Module trident: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.3.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) TRIDENT: driver for Trident chipsets: tvga9000, tvga9000i, tvga8900c,
tvga8900d, tvga9200cxr, tgui9400cxi, cyber9320, cyber9388, cyber9397,
cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi,
tgui9440agi, tgui9660, tgui9680, providia9682, providia9685,
cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7,
cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1,
cyberbladeAi1d, bladeXP, cyberbladeXPAi1, cyberbladeXP4, XP5
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for trident
(--) Assigning device section with no busID to primary device
(--) Chipset cyberbladei1d found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) TRIDENT(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) TRIDENT(0): Depth 24, (--) framebuffer bpp 32
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) TRIDENT(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) TRIDENT(0): RGB weight 888
(==) TRIDENT(0): Default visual is TrueColor
(==) TRIDENT(0): Using gamma correction (1.0, 1.0, 1.0)
(==) TRIDENT(0): Using XAA for acceleration
(==) TRIDENT(0): Linear framebuffer at 0xF5000000
(--) TRIDENT(0): IO registers at 0xF4100000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) TRIDENT(0): initializing int10
(II) TRIDENT(0): Primary V_BIOS segment is: 0xc000
(II) TRIDENT(0): VESA BIOS detected
(II) TRIDENT(0): VESA VBE Version 1.2
(II) TRIDENT(0): VESA VBE Total Mem: 8192 kB
(II) TRIDENT(0): VESA VBE OEM: Copyright 1998 TRIDENT MICROSYSTEMS INC.
(--) TRIDENT(0): Revision is 106
(--) TRIDENT(0): Found CyberBlade/DSTN/i1 chip
(--) TRIDENT(0): RAM type is SDRAM
(--) TRIDENT(0): Using SW cursor
(--) TRIDENT(0): VideoRAM: 8192 kByte
(--) TRIDENT(0): TFT Panel 1024x768 found
(--) TRIDENT(0): Memory Clock is 57.27 MHz
(==) TRIDENT(0): Min pixel clock is 12 MHz
(--) TRIDENT(0): Max pixel clock is 115 MHz
(II) TRIDENT(0): Configured Monitor: Using default hsync range of 31.50-37.90 kHz
(II) TRIDENT(0): Configured Monitor: Using default vrefresh range of 50.00-70.00 Hz
(WW) TRIDENT(0): Unable to estimate virtual size
(II) TRIDENT(0): Clock range: 12.00 to 115.00 MHz
(II) TRIDENT(0): Not using default mode "640x350" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "320x175" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "640x400" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "320x200" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "720x400" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "360x200" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "640x480" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "320x240" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "640x480" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "320x240" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "640x480" (hsync out of range)
(II) TRIDENT(0): Not using default mode "320x240" (hsync out of range)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "400x300" (hsync out of range)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "400x300" (hsync out of range)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "400x300" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1024x768" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "512x384" (vrefresh out of range)
(II) TRIDENT(0): Not using default mode "1024x768" (hsync out of range)
(II) TRIDENT(0): Not using default mode "512x384" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1024x768" (hsync out of range)
(II) TRIDENT(0): Not using default mode "512x384" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1024x768" (hsync out of range)
(II) TRIDENT(0): Not using default mode "512x384" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1024x768" (hsync out of range)
(II) TRIDENT(0): Not using default mode "512x384" (hsync out of range)
(II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1152x864" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x432" (hsync out of range)
(II) TRIDENT(0): Removing mode (1280x960) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1280x960" (unknown reason)
(II) TRIDENT(0): Not using default mode "640x480" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "640x480" (hsync out of range)
(II) TRIDENT(0): Removing mode (1280x1024) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1280x1024" (unknown reason)
(II) TRIDENT(0): Not using default mode "640x512" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "640x512" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "640x512" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "800x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "896x672" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "928x696" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "832x624" (hsync out of range)
(II) TRIDENT(0): Not using default mode "416x312" (hsync out of range)
(II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1152x864" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x432" (hsync out of range)
(II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1152x864" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x432" (hsync out of range)
(II) TRIDENT(0): Removing mode (1152x864) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1152x864" (unknown reason)
(II) TRIDENT(0): Not using default mode "576x432" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "576x432" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "576x432" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "576x432" (hsync out of range)
(II) TRIDENT(0): Removing mode (1360x768) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1360x768" (unknown reason)
(II) TRIDENT(0): Not using default mode "680x384" (hsync out of range)
(II) TRIDENT(0): Removing mode (1360x768) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1360x768" (unknown reason)
(II) TRIDENT(0): Not using default mode "680x384" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "700x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "700x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "700x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "700x525" (hsync out of range)
(II) TRIDENT(0): Removing mode (1440x900) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1440x900" (unknown reason)
(II) TRIDENT(0): Not using default mode "720x450" (hsync out of range)
(II) TRIDENT(0): Removing mode (1600x1024) larger than the LCD panel (1024x768)
(II) TRIDENT(0): Not using default mode "1600x1024" (unknown reason)
(II) TRIDENT(0): Not using default mode "800x512" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "840x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "840x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "840x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "840x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "840x525" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1920x1080" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "960x540" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "960x600" (hsync out of range)
(II) TRIDENT(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) TRIDENT(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) TRIDENT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) TRIDENT(0): Virtual size is 800x600 (pitch 800)
(**) TRIDENT(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) TRIDENT(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) TRIDENT(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) TRIDENT(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(**) TRIDENT(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) TRIDENT(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) TRIDENT(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) TRIDENT(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) TRIDENT(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) TRIDENT(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) TRIDENT(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) TRIDENT(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
(==) TRIDENT(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) TRIDENT(0): Initializing int10
(II) TRIDENT(0): Primary V_BIOS segment is: 0xc000
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow off
(II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94
(II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x82 0x69 0x19
(II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09 0x24 (0x08)
(II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x2d 0x57 0x00 0x00
(II) TRIDENT(0): Setting BIOS Mode: 6d for: 800x600
(II) TRIDENT(0): Found Clock 80.00 n=249 m=21 k=1
(II) TRIDENT(0): Using 1447 scanlines of offscreen memory for area's
(II) TRIDENT(0): Using 1838208 bytes of offscreen memory for linear (offset=0x63f380)
(II) TRIDENT(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Image Writes
Setting up tile and stipple cache:
32 128x128 slots
8 256x256 slots
(==) TRIDENT(0): Backing store disabled
(II) TRIDENT(0): DPMS enabled
(II) TRIDENT(0): Trident Video Flags: VID_ZOOM_INV VID_ZOOM_MINI
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device Video Bus
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.0
(**) Option "Device" "/dev/input/event2"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Open ACPI successful (/var/run/acpid.socket)
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow on
(II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94
(II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x82 0x69 0x19
(II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09 0x24 (0x08)
(II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x2d 0x57 0x00 0x00
(II) TRIDENT(0): Setting BIOS Mode: 6d for: 800x600
(II) TRIDENT(0): Found Clock 130.00 n=219 m=23 k=0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow on
(II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94
(II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x82 0x69 0x19
(II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09 0x24 (0x08)
(II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x2d 0x57 0x00 0x00
(II) TRIDENT(0): Setting BIOS Mode: 6d for: 800x600
(II) TRIDENT(0): Found Clock 130.00 n=219 m=23 k=0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow on
(II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94
(II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x82 0x69 0x19
(II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09 0x24 (0x08)
(II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x2d 0x57 0x00 0x00
(II) TRIDENT(0): Setting BIOS Mode: 6d for: 800x600
(II) TRIDENT(0): Found Clock 130.00 n=219 m=23 k=0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow on
(II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94
(II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x82 0x69 0x19
(II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09 0x24 (0x08)
(II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x2d 0x57 0x00 0x00
(II) TRIDENT(0): Setting BIOS Mode: 6d for: 800x600
(II) TRIDENT(0): Found Clock 130.00 n=219 m=23 k=0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow on
(II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94
(II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x82 0x69 0x19
(II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09 0x24 (0x08)
(II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x2d 0x57 0x00 0x00
(II) TRIDENT(0): Setting BIOS Mode: 6d for: 800x600
(II) TRIDENT(0): Found Clock 130.00 n=219 m=23 k=0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow on
(II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94
(II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x82 0x69 0x19
(II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09 0x24 (0x08)
(II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x2d 0x57 0x00 0x00
(II) TRIDENT(0): Setting BIOS Mode: 6d for: 800x600
(II) TRIDENT(0): Found Clock 130.00 n=219 m=23 k=0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow on
(II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94
(II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x82 0x69 0x19
(II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09 0x24 (0x08)
(II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x2d 0x57 0x00 0x00
(II) TRIDENT(0): Setting BIOS Mode: 6d for: 800x600
(II) TRIDENT(0): Found Clock 130.00 n=219 m=23 k=0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow on
(II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94
(II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x82 0x69 0x19
(II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09 0x24 (0x08)
(II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x2d 0x57 0x00 0x00
(II) TRIDENT(0): Setting BIOS Mode: 6d for: 800x600
(II) TRIDENT(0): Found Clock 130.00 n=219 m=23 k=0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow on
(II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94
(II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x82 0x69 0x19
(II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09 0x24 (0x08)
(II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x2d 0x57 0x00 0x00
(II) TRIDENT(0): Setting BIOS Mode: 6d for: 800x600
(II) TRIDENT(0): Found Clock 130.00 n=219 m=23 k=0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) TRIDENT(0): Overriding Horizontal timings.
(II) TRIDENT(0): Shadow on
(II) TRIDENT(0): H-timing shadow registers: 0xa3 0x00 0x84 0x94
(II) TRIDENT(0): H-timing registers: 0x7f 0x63 0x63 0x82 0x69 0x19
(II) TRIDENT(0): V-timing shadow registers: 0x24 0xf5 0x03 0x09 0x24 (0x08)
(II) TRIDENT(0): V-timing registers: 0x72 0xf0 0x59 0x2d 0x57 0x00 0x00
(II) TRIDENT(0): Setting BIOS Mode: 6d for: 800x600
(II) TRIDENT(0): Found Clock 130.00 n=219 m=23 k=0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
Reply to: