On Wed, May 20, 2009 at 2:33 AM, Julien Cristau <jcristau@debian.org> wrote: > On Wed, May 20, 2009 at 01:26:27 -0400, Luo Yong wrote: > >> After I dist-upgrade my system, the xorg runs very slow on my HP6535s >> laptop. It take a relative long time when refreshing the webpage and >> the desktop itself than before and it cannot run almost all 2D games >> now. The kernel version is: 2.6.29.3, and the lspci result related to >> the video chipset is: >> > Please attach dmesg and Xorg log. And in the future consider using the > reportbug tool to submit bugs to the Debian BTS. Thanks! > > Cheers, > Julien > Hello, The attachment is my dmesg output and the xorg log file. Thank you very much.
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.29.3 (yong@yong-laptop) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun May 17 11:08:48 PDT 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006cb70000 (usable) [ 0.000000] BIOS-e820: 000000006cb70000 - 000000006cb80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006cb80000 - 000000006fd4f000 (usable) [ 0.000000] BIOS-e820: 000000006fd4f000 - 000000006fdcf000 (reserved) [ 0.000000] BIOS-e820: 000000006fdcf000 - 000000006fecf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006fecf000 - 000000006feff000 (ACPI data) [ 0.000000] BIOS-e820: 000000006feff000 - 000000006ff00000 (usable) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x6ff00 max_arch_pfn = 0x100000 [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 3787f000 - 37fef74a [ 0.000000] Allocated new RAMDISK: 00582000 - 00cf274a [ 0.000000] Move RAMDISK from 000000003787f000 - 0000000037fef749 to 00582000 - 00cf2749 [ 0.000000] ACPI: RSDP 000F68B0, 0014 (r0 HP ) [ 0.000000] ACPI: RSDT 6FEFE038, 0038 (r1 HPQOEM SLIC-MPC 3 1000013) [ 0.000000] ACPI: FACP 6FEFD000, 0074 (r1 HP 0944 3 HP 1) [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) [ 0.000000] ACPI: DSDT 6FEE5000, 1475B (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: FACS 6FEA1000, 0040 [ 0.000000] ACPI: APIC 6FEFC000, 0084 (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: MCFG 6FEFB000, 003C (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: HPET 6FEE3000, 0038 (r1 HP 0944 1 HP 1) [ 0.000000] ACPI: SSDT 6FEE2000, 02B4 (r1 AMD PowerNow 1 AMD 1) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 903MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 00000000 - 377fe000 [ 0.000000] bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000057e6c4] TEXT DATA BSS ==> [0000100000 - 000057e6c4] [ 0.000000] #4 [000057f000 - 0000582000] INIT_PG_TABLE ==> [000057f000 - 0000582000] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [0000582000 - 0000cf274a] NEW RAMDISK ==> [0000582000 - 0000cf274a] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0006ff00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0006cb70 [ 0.000000] 0: 0x0006cb80 -> 0x0006fd4f [ 0.000000] 0: 0x0006feff -> 0x0006ff00 [ 0.000000] On node 0 totalpages: 457951 [ 0.000000] free_area_init_node: node 0, pgdat c0483d00, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 1807 pages used for memmap [ 0.000000] HighMem zone: 228915 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000 [ 0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 70000000 (gap: 6ff00000:70100000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Allocating 36864 bytes of per cpu data [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454368 [ 0.000000] Kernel command line: root=/dev/sda9 ro quiet [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops [ 0.000000] Detected 2000.098 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 1803352k/1833984k available (2633k kernel code, 27568k reserved, 1080k data, 328k init, 922888k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff50000 - 0xfffff000 ( 700 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.004000] .init : 0xc04a8000 - 0xc04fa000 ( 328 kB) [ 0.004000] .data : 0xc03927e3 - 0xc04a0970 (1080 kB) [ 0.004000] .text : 0xc0100000 - 0xc03927e3 (2633 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer [ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.19 BogoMIPS (lpj=8000392) [ 0.004048] Security Framework initialized [ 0.004053] SELinux: Disabled at boot. [ 0.004069] Mount-cache hash table entries: 512 [ 0.004201] Initializing cgroup subsys ns [ 0.004204] Initializing cgroup subsys cpuacct [ 0.004208] Initializing cgroup subsys devices [ 0.004226] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004228] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004231] CPU: Physical Processor ID: 0 [ 0.004233] CPU: Processor Core ID: 0 [ 0.004237] Intel machine check architecture supported. [ 0.004240] Intel machine check reporting enabled on CPU#0. [ 0.004242] using C1E aware idle routine [ 0.004252] Checking 'hlt' instruction... OK. [ 0.022163] ACPI: Core revision 20081204 [ 0.040468] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.080241] CPU0: AMD Athlon(tm)X2 DualCore QL-62 stepping 01 [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3990.17 BogoMIPS (lpj=7980341) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] Intel machine check architecture supported. [ 0.004000] Intel machine check reporting enabled on CPU#1. [ 0.168185] CPU1: AMD Athlon(tm)X2 DualCore QL-62 stepping 01 [ 0.168233] checking TSC synchronization [CPU#0 -> CPU#1]: [ 0.172001] Measured 16285274 cycles TSC warp between CPUs, turning off TSC clock. [ 0.172001] Marking TSC unstable due to check_tsc_sync_source failed [ 0.172046] Brought up 2 CPUs [ 0.172048] Total of 2 processors activated (7990.36 BogoMIPS). [ 0.172124] CPU0 attaching sched-domain: [ 0.172127] domain 0: span 0-1 level CPU [ 0.172130] groups: 0 1 [ 0.172135] CPU1 attaching sched-domain: [ 0.172137] domain 0: span 0-1 level CPU [ 0.172139] groups: 1 0 [ 0.172197] net_namespace: 1056 bytes [ 0.172197] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots. [ 0.172197] Booting paravirtualized kernel on bare hardware [ 0.172281] NET: Registered protocol family 16 [ 0.172281] ACPI: bus type pci registered [ 0.172281] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.172281] PCI: MCFG area at e0000000 reserved in E820 [ 0.172281] PCI: Using MMCONFIG for extended config space [ 0.172281] PCI: Using configuration type 1 for base access [ 0.172281] bio: create slab <bio-0> at 0 [ 0.176948] ACPI: EC: Look up EC in DSDT [ 0.204020] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.236193] ACPI: Interpreter enabled [ 0.236198] ACPI: (supports S0 S3 S4 S5) [ 0.236222] ACPI: Using IOAPIC for interrupt routing [ 0.248199] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.248199] ACPI: EC: driver started in interrupt mode [ 0.248261] ACPI: No dock devices found. [ 0.248273] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.248309] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.248309] pci 0000:00:04.0: PME# disabled [ 0.248309] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.248309] pci 0000:00:07.0: PME# disabled [ 0.248365] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 0.248368] pci 0000:00:09.0: PME# disabled [ 0.248445] pci 0000:00:11.0: reg 10 io port: [0x6018-0x601f] [ 0.248454] pci 0000:00:11.0: reg 14 io port: [0x6024-0x6027] [ 0.248462] pci 0000:00:11.0: reg 18 io port: [0x6010-0x6017] [ 0.248470] pci 0000:00:11.0: reg 1c io port: [0x6020-0x6023] [ 0.248478] pci 0000:00:11.0: reg 20 io port: [0x6000-0x600f] [ 0.248487] pci 0000:00:11.0: reg 24 32bit mmio: [0x94409000-0x944093ff] [ 0.248563] pci 0000:00:12.0: reg 10 32bit mmio: [0x94408000-0x94408fff] [ 0.248628] pci 0000:00:12.1: reg 10 32bit mmio: [0x94407000-0x94407fff] [ 0.248700] pci 0000:00:12.2: reg 10 32bit mmio: [0x94409500-0x944095ff] [ 0.252070] pci 0000:00:12.2: supports D1 D2 [ 0.252072] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.252077] pci 0000:00:12.2: PME# disabled [ 0.252111] pci 0000:00:13.0: reg 10 32bit mmio: [0x94406000-0x94406fff] [ 0.252175] pci 0000:00:13.1: reg 10 32bit mmio: [0x94405000-0x94405fff] [ 0.252247] pci 0000:00:13.2: reg 10 32bit mmio: [0x94409400-0x944094ff] [ 0.252327] pci 0000:00:13.2: supports D1 D2 [ 0.252329] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.252334] pci 0000:00:13.2: PME# disabled [ 0.252469] pci 0000:00:14.2: reg 10 64bit mmio: [0x94400000-0x94403fff] [ 0.252532] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.252537] pci 0000:00:14.2: PME# disabled [ 0.252657] pci 0000:00:14.5: reg 10 32bit mmio: [0x94404000-0x94404fff] [ 0.252910] pci 0000:01:05.0: reg 10 32bit mmio: [0x80000000-0x8fffffff] [ 0.252915] pci 0000:01:05.0: reg 14 io port: [0x5000-0x50ff] [ 0.252920] pci 0000:01:05.0: reg 18 32bit mmio: [0x94300000-0x9430ffff] [ 0.252931] pci 0000:01:05.0: reg 24 32bit mmio: [0x94200000-0x942fffff] [ 0.252957] pci 0000:01:05.0: supports D1 D2 [ 0.253041] pci 0000:00:01.0: bridge io port: [0x5000-0x5fff] [ 0.253045] pci 0000:00:01.0: bridge 32bit mmio: [0x94200000-0x943fffff] [ 0.253051] pci 0000:00:01.0: bridge 64bit mmio pref: [0x80000000-0x8fffffff] [ 0.253143] pci 0000:02:00.0: reg 10 64bit mmio: [0x93100000-0x93103fff] [ 0.253152] pci 0000:02:00.0: reg 18 io port: [0x3000-0x30ff] [ 0.253230] pci 0000:02:00.0: supports D1 D2 [ 0.253232] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.253239] pci 0000:02:00.0: PME# disabled [ 0.253337] pci 0000:00:04.0: bridge io port: [0x3000-0x4fff] [ 0.253341] pci 0000:00:04.0: bridge 32bit mmio: [0x93100000-0x941fffff] [ 0.253346] pci 0000:00:04.0: bridge 64bit mmio pref: [0x90000000-0x90ffffff] [ 0.253400] pci 0000:00:07.0: bridge io port: [0x2000-0x2fff] [ 0.253404] pci 0000:00:07.0: bridge 32bit mmio: [0x92100000-0x930fffff] [ 0.253409] pci 0000:00:07.0: bridge 64bit mmio pref: [0x91000000-0x91ffffff] [ 0.253464] pci 0000:00:09.0: bridge 32bit mmio: [0x92000000-0x920fffff] [ 0.253531] pci 0000:00:14.4: transparent bridge [ 0.253536] pci 0000:00:14.4: bridge io port: [0x1000-0x1fff] [ 0.253563] pci_bus 0000:00: on NUMA node 0 [ 0.253571] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.253672] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.253750] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.253840] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB9_._PRT] [ 0.253925] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT] [ 0.254049] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.268175] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.268409] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.268642] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.268873] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.269105] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.269337] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.269569] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.269801] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.269910] ACPI: Power Resource [APPR] (off) [ 0.269910] ACPI: Power Resource [PFN0] (off) [ 0.269910] ACPI: Power Resource [PFN1] (off) [ 0.269910] ACPI: Power Resource [PFN2] (off) [ 0.269910] ACPI: Power Resource [PFN3] (off) [ 0.269910] PCI: Using ACPI for IRQ routing [ 0.288040] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0 [ 0.288046] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.292050] hpet: hpet2 irq 24 for MSI [ 0.296021] Switched to high resolution mode on CPU 0 [ 0.296293] Switched to high resolution mode on CPU 1 [ 0.308548] pnp: PnP ACPI init [ 0.308556] ACPI: bus type pnp registered [ 0.312197] pnp: PnP ACPI: found 11 devices [ 0.312199] ACPI: ACPI bus type pnp unregistered [ 0.312203] PnPBIOS: Disabled by ACPI PNP [ 0.312214] system 00:04: ioport range 0x400-0x4cf has been reserved [ 0.312217] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.312220] system 00:04: ioport range 0x4d6-0x4d6 has been reserved [ 0.312222] system 00:04: ioport range 0x680-0x6ff has been reserved [ 0.312225] system 00:04: ioport range 0x77a-0x77a has been reserved [ 0.312228] system 00:04: ioport range 0xc00-0xc01 has been reserved [ 0.312231] system 00:04: ioport range 0xc14-0xc14 has been reserved [ 0.312234] system 00:04: ioport range 0xc50-0xc52 has been reserved [ 0.312237] system 00:04: ioport range 0xc6c-0xc6c has been reserved [ 0.312240] system 00:04: ioport range 0xc6f-0xc6f has been reserved [ 0.312243] system 00:04: ioport range 0xcd0-0xcdb has been reserved [ 0.312246] system 00:04: ioport range 0x220-0x227 has been reserved [ 0.312249] system 00:04: ioport range 0x260-0x273 has been reserved [ 0.312252] system 00:04: ioport range 0x800-0x800 has been reserved [ 0.312255] system 00:04: ioport range 0x804-0x804 has been reserved [ 0.312258] system 00:04: ioport range 0x87f-0x87f has been reserved [ 0.312260] system 00:04: ioport range 0xcdc-0xcdf has been reserved [ 0.312264] system 00:04: ioport range 0xb00-0xb0f has been reserved [ 0.312266] system 00:04: ioport range 0xb20-0xb3f has been reserved [ 0.312270] system 00:04: ioport range 0x200-0x27f could not be reserved [ 0.312276] system 00:05: iomem range 0x0-0x9ffff could not be reserved [ 0.312279] system 00:05: iomem range 0xec000-0xfffff could not be reserved [ 0.312282] system 00:05: iomem range 0x100000-0x7fffffff could not be reserved [ 0.312285] system 00:05: iomem range 0xe0000000-0xefffffff has been reserved [ 0.312289] system 00:05: iomem range 0xfeb00000-0xfeb00fff has been reserved [ 0.312292] system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.312295] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.348049] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.348053] pci 0000:00:01.0: IO window: 0x5000-0x5fff [ 0.348058] pci 0000:00:01.0: MEM window: 0x94200000-0x943fffff [ 0.348062] pci 0000:00:01.0: PREFETCH window: 0x00000080000000-0x0000008fffffff [ 0.348068] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02 [ 0.348071] pci 0000:00:04.0: IO window: 0x3000-0x4fff [ 0.348075] pci 0000:00:04.0: MEM window: 0x93100000-0x941fffff [ 0.348079] pci 0000:00:04.0: PREFETCH window: 0x00000090000000-0x00000090ffffff [ 0.348084] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03 [ 0.348087] pci 0000:00:07.0: IO window: 0x2000-0x2fff [ 0.348092] pci 0000:00:07.0: MEM window: 0x92100000-0x930fffff [ 0.348095] pci 0000:00:07.0: PREFETCH window: 0x00000091000000-0x00000091ffffff [ 0.348101] pci 0000:00:09.0: PCI bridge, secondary bus 0000:06 [ 0.348103] pci 0000:00:09.0: IO window: disabled [ 0.348107] pci 0000:00:09.0: MEM window: 0x92000000-0x920fffff [ 0.348111] pci 0000:00:09.0: PREFETCH window: disabled [ 0.348116] pci 0000:00:14.4: PCI bridge, secondary bus 0000:80 [ 0.348153] pci 0000:00:14.4: IO window: 0x1000-0x1fff [ 0.348159] pci 0000:00:14.4: MEM window: disabled [ 0.348164] pci 0000:00:14.4: PREFETCH window: disabled [ 0.348177] pci 0000:00:01.0: setting latency timer to 64 [ 0.348184] pci 0000:00:04.0: setting latency timer to 64 [ 0.348191] pci 0000:00:07.0: setting latency timer to 64 [ 0.348198] pci 0000:00:09.0: setting latency timer to 64 [ 0.348207] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.348209] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.348212] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff] [ 0.348215] pci_bus 0000:01: resource 1 mem: [0x94200000-0x943fffff] [ 0.348217] pci_bus 0000:01: resource 2 mem: [0x80000000-0x8fffffff] [ 0.348220] pci_bus 0000:01: resource 3 mem: [0x0-0x0] [ 0.348222] pci_bus 0000:02: resource 0 io: [0x3000-0x4fff] [ 0.348225] pci_bus 0000:02: resource 1 mem: [0x93100000-0x941fffff] [ 0.348227] pci_bus 0000:02: resource 2 mem: [0x90000000-0x90ffffff] [ 0.348230] pci_bus 0000:02: resource 3 mem: [0x0-0x0] [ 0.348232] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] [ 0.348235] pci_bus 0000:03: resource 1 mem: [0x92100000-0x930fffff] [ 0.348238] pci_bus 0000:03: resource 2 mem: [0x91000000-0x91ffffff] [ 0.348240] pci_bus 0000:03: resource 3 mem: [0x0-0x0] [ 0.348242] pci_bus 0000:06: resource 0 mem: [0x0-0x0] [ 0.348245] pci_bus 0000:06: resource 1 mem: [0x92000000-0x920fffff] [ 0.348247] pci_bus 0000:06: resource 2 mem: [0x0-0x0] [ 0.348249] pci_bus 0000:06: resource 3 mem: [0x0-0x0] [ 0.348252] pci_bus 0000:80: resource 0 io: [0x1000-0x1fff] [ 0.348254] pci_bus 0000:80: resource 1 mem: [0x0-0x0] [ 0.348257] pci_bus 0000:80: resource 2 mem: [0x0-0x0] [ 0.348259] pci_bus 0000:80: resource 3 io: [0x00-0xffff] [ 0.348261] pci_bus 0000:80: resource 4 mem: [0x000000-0xffffffff] [ 0.348360] NET: Registered protocol family 2 [ 0.392625] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.393040] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.393716] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.394034] TCP: Hash tables configured (established 131072 bind 65536) [ 0.394037] TCP reno registered [ 0.404692] NET: Registered protocol family 1 [ 0.404805] checking if image is initramfs... it is [ 0.964959] Freeing initrd memory: 7617k freed [ 0.966485] audit: initializing netlink socket (disabled) [ 0.966499] type=2000 audit(1242855718.964:1): initialized [ 0.966823] highmem bounce pool size: 64 pages [ 0.966828] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.967170] VFS: Disk quotas dquot_6.5.2 [ 0.967207] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.967342] NTFS driver 2.1.29 [Flags: R/W]. [ 0.967451] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, debug enabled [ 0.968100] SGI XFS Quota Management subsystem [ 0.968108] msgmni has been set to 1736 [ 0.968431] alg: No test for stdrng (krng) [ 0.968514] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.968517] io scheduler noop registered [ 0.968519] io scheduler anticipatory registered [ 0.968521] io scheduler deadline registered [ 0.968544] io scheduler cfq registered (default) [ 0.968745] pci 0000:01:05.0: Boot video device [ 0.968897] pcieport-driver 0000:00:04.0: setting latency timer to 64 [ 0.968955] pcieport-driver 0000:00:04.0: irq 25 for MSI/MSI-X [ 0.969105] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 0.969157] pcieport-driver 0000:00:07.0: irq 26 for MSI/MSI-X [ 0.969332] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 0.969383] pcieport-driver 0000:00:09.0: irq 27 for MSI/MSI-X [ 0.969803] isapnp: Scanning for PnP cards... [ 1.353601] isapnp: No Plug & Play device found [ 1.357839] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.360307] brd: module loaded [ 1.360433] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.363019] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.364118] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.364124] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.364127] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.364130] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.364133] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.364240] mice: PS/2 mouse device common for all mice [ 1.364347] rtc_cmos 00:06: RTC can wake from S4 [ 1.364460] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.364488] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 1.364719] cpuidle: using governor ladder [ 1.364721] cpuidle: using governor menu [ 1.364727] No iBFT detected. [ 1.365112] TCP cubic registered [ 1.365116] NET: Registered protocol family 17 [ 1.365127] Using IPI No-Shortcut mode [ 1.365301] registered taskstats version 1 [ 1.365501] rtc_cmos 00:06: setting system clock to 2009-05-20 21:42:00 UTC (1242855720) [ 1.365764] Freeing unused kernel memory: 328k freed [ 1.396558] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.495738] fan PNP0C0B:00: registered as cooling_device0 [ 1.495745] ACPI: Fan [FAN0] (off) [ 1.496071] fan PNP0C0B:01: registered as cooling_device1 [ 1.496077] ACPI: Fan [FAN1] (off) [ 1.496342] fan PNP0C0B:02: registered as cooling_device2 [ 1.496347] ACPI: Fan [FAN2] (off) [ 1.496580] fan PNP0C0B:03: registered as cooling_device3 [ 1.496585] ACPI: Fan [FAN3] (off) [ 1.502381] processor ACPI_CPU:00: registered as cooling_device4 [ 1.502387] ACPI: Processor [CPU0] (supports 8 throttling states) [ 1.502491] processor ACPI_CPU:01: registered as cooling_device5 [ 1.510019] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.512019] ACPI: Thermal Zone [CPUZ] (41 C) [ 1.665238] sky2 driver version 1.22 [ 1.665332] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.665361] sky2 0000:02:00.0: setting latency timer to 64 [ 1.665471] sky2 0000:02:00.0: Yukon-2 FE+ chip revision 0 [ 1.666132] sky2 0000:02:00.0: irq 28 for MSI/MSI-X [ 1.666540] sky2 eth0: addr 00:22:64:66:90:95 [ 1.680768] SCSI subsystem initialized [ 1.697056] libata version 3.00 loaded. [ 1.709685] usbcore: registered new interface driver usbfs [ 1.709716] usbcore: registered new interface driver hub [ 1.709799] usbcore: registered new device driver usb [ 1.713607] ahci 0000:00:11.0: version 3.0 [ 1.713672] ahci 0000:00:11.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.713933] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 1.713937] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pio [ 1.714764] scsi0 : ahci [ 1.714918] scsi1 : ahci [ 1.714997] scsi2 : ahci [ 1.715079] scsi3 : ahci [ 1.717757] scsi4 : ahci [ 1.717859] scsi5 : ahci [ 1.718017] ata1: SATA max UDMA/133 abar m1024@0x94409000 port 0x94409100 irq 20 [ 1.718021] ata2: SATA max UDMA/133 abar m1024@0x94409000 port 0x94409180 irq 20 [ 1.718025] ata3: SATA max UDMA/133 abar m1024@0x94409000 port 0x94409200 irq 20 [ 1.718029] ata4: SATA max UDMA/133 abar m1024@0x94409000 port 0x94409280 irq 20 [ 1.718033] ata5: SATA max UDMA/133 abar m1024@0x94409000 port 0x94409300 irq 20 [ 1.718037] ata6: SATA max UDMA/133 abar m1024@0x94409000 port 0x94409380 irq 20 [ 1.720273] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.036571] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.036994] ata1.00: ATA-8: FUJITSU MHZ2250BH G2, 8909, max UDMA/100 [ 2.036997] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.037595] ata1.00: configured for UDMA/100 [ 2.052653] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2250B 8909 PQ: 0 ANSI: 5 [ 2.372071] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.388910] ata2.00: ATAPI: Optiarc CDRWDVD CRX890S, VH04, max UDMA/100 [ 2.406107] ata2.00: configured for UDMA/100 [ 2.420814] scsi 1:0:0:0: CD-ROM Optiarc CDRWDVD CRX890S VH04 PQ: 0 ANSI: 5 [ 2.740565] ata3: SATA link down (SStatus 0 SControl 300) [ 3.076067] ata4: SATA link down (SStatus 0 SControl 300) [ 3.412082] ata5: SATA link down (SStatus 0 SControl 300) [ 3.748565] ata6: SATA link down (SStatus 0 SControl 300) [ 3.764389] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.764478] ehci_hcd 0000:00:12.2: setting latency timer to 64 [ 3.764482] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 3.764539] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 3.764567] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 3.764588] ehci_hcd 0000:00:12.2: debug port 1 [ 3.764610] ehci_hcd 0000:00:12.2: irq 17, io mem 0x94409500 [ 3.772417] Driver 'sd' needs updating - please use bus_type methods [ 3.772526] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) [ 3.772542] sd 0:0:0:0: [sda] Write Protect is off [ 3.772545] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.772566] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.772624] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) [ 3.772635] sd 0:0:0:0: [sda] Write Protect is off [ 3.772638] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.772658] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.772662] sda:<6>ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 3.776601] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.776604] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.776607] usb usb1: Product: EHCI Host Controller [ 3.776609] usb usb1: Manufacturer: Linux 2.6.29.3 ehci_hcd [ 3.776612] usb usb1: SerialNumber: 0000:00:12.2 [ 3.776687] usb usb1: configuration #1 chosen from 1 choice [ 3.776717] hub 1-0:1.0: USB hub found [ 3.776728] hub 1-0:1.0: 6 ports detected [ 3.776895] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.776932] ehci_hcd 0000:00:13.2: setting latency timer to 64 [ 3.776936] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 3.776962] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 3.776988] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 3.777010] ehci_hcd 0000:00:13.2: debug port 1 [ 3.777030] ehci_hcd 0000:00:13.2: irq 19, io mem 0x94409400 [ 3.780187] Driver 'sr' needs updating - please use bus_type methods [ 3.788566] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 3.788598] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.788601] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.788603] usb usb2: Product: EHCI Host Controller [ 3.788605] usb usb2: Manufacturer: Linux 2.6.29.3 ehci_hcd [ 3.788608] usb usb2: SerialNumber: 0000:00:13.2 [ 3.788668] usb usb2: configuration #1 chosen from 1 choice [ 3.788699] hub 2-0:1.0: USB hub found [ 3.788708] hub 2-0:1.0: 6 ports detected [ 3.792335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.792399] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.792434] ohci_hcd 0000:00:12.0: setting latency timer to 64 [ 3.792438] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 3.792478] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 3.792575] ohci_hcd 0000:00:12.0: irq 16, io mem 0x94408000 [ 3.797836] sda1 sda2 < sda5 sda6 sda7 sda8 sda9<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.852567] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.852570] usb usb3: Product: OHCI Host Controller [ 3.852572] usb usb3: Manufacturer: Linux 2.6.29.3 ohci_hcd [ 3.852575] usb usb3: SerialNumber: 0000:00:12.0 [ 3.852653] usb usb3: configuration #1 chosen from 1 choice [ 3.852684] hub 3-0:1.0: USB hub found [ 3.852731] hub 3-0:1.0: 3 ports detected [ 3.852880] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.852922] ohci_hcd 0000:00:12.1: setting latency timer to 64 [ 3.852927] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 3.852952] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 3.852972] ohci_hcd 0000:00:12.1: irq 16, io mem 0x94407000 [ 3.856263] sda10 sda11 > [ 3.860257] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.864457] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 3.864457] Uniform CD-ROM driver Revision: 3.20 [ 3.864586] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.874401] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.874428] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.912564] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.912569] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.912572] usb usb4: Product: OHCI Host Controller [ 3.912574] usb usb4: Manufacturer: Linux 2.6.29.3 ohci_hcd [ 3.912576] usb usb4: SerialNumber: 0000:00:12.1 [ 3.912658] usb usb4: configuration #1 chosen from 1 choice [ 3.912687] hub 4-0:1.0: USB hub found [ 3.912734] hub 4-0:1.0: 3 ports detected [ 3.912891] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.912970] ohci_hcd 0000:00:13.0: setting latency timer to 64 [ 3.912975] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 3.913000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 3.913020] ohci_hcd 0000:00:13.0: irq 17, io mem 0x94406000 [ 3.972568] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.972573] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.972576] usb usb5: Product: OHCI Host Controller [ 3.972578] usb usb5: Manufacturer: Linux 2.6.29.3 ohci_hcd [ 3.972580] usb usb5: SerialNumber: 0000:00:13.0 [ 3.972662] usb usb5: configuration #1 chosen from 1 choice [ 3.972696] hub 5-0:1.0: USB hub found [ 3.972742] hub 5-0:1.0: 3 ports detected [ 3.972891] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.972935] ohci_hcd 0000:00:13.1: setting latency timer to 64 [ 3.972940] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 3.972966] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 3.972986] ohci_hcd 0000:00:13.1: irq 17, io mem 0x94405000 [ 4.032052] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.032056] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.032059] usb usb6: Product: OHCI Host Controller [ 4.032061] usb usb6: Manufacturer: Linux 2.6.29.3 ohci_hcd [ 4.032063] usb usb6: SerialNumber: 0000:00:13.1 [ 4.032132] usb usb6: configuration #1 chosen from 1 choice [ 4.032159] hub 6-0:1.0: USB hub found [ 4.032205] hub 6-0:1.0: 3 ports detected [ 4.032351] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.032376] ohci_hcd 0000:00:14.5: setting latency timer to 64 [ 4.032380] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 4.032403] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 4.032445] ohci_hcd 0000:00:14.5: irq 18, io mem 0x94404000 [ 4.088560] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.088563] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.088566] usb usb7: Product: OHCI Host Controller [ 4.088569] usb usb7: Manufacturer: Linux 2.6.29.3 ohci_hcd [ 4.088571] usb usb7: SerialNumber: 0000:00:14.5 [ 4.088642] usb usb7: configuration #1 chosen from 1 choice [ 4.088672] hub 7-0:1.0: USB hub found [ 4.088717] hub 7-0:1.0: 2 ports detected [ 4.296567] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 4.420213] PM: Starting manual resume from disk [ 4.467592] usb 3-1: New USB device found, idVendor=15d9, idProduct=0a4c [ 4.467596] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.467599] usb 3-1: Product: USB OPTICAL MOUSE [ 4.467689] usb 3-1: configuration #1 chosen from 1 choice [ 4.480331] usbcore: registered new interface driver hiddev [ 4.481331] kjournald starting. Commit interval 5 seconds [ 4.481348] EXT3-fs: mounted filesystem with ordered data mode. [ 4.484918] input: USB OPTICAL MOUSE as /class/input/input1 [ 4.500654] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:12.0-1/input0 [ 4.500676] usbcore: registered new interface driver usbhid [ 4.500679] usbhid: v2.6:USB HID core driver [ 4.580559] usb 2-2: new high speed USB device using ehci_hcd and address 2 [ 4.751390] usb 2-2: New USB device found, idVendor=04f2, idProduct=b083 [ 4.751395] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 4.751398] usb 2-2: Product: CKF7063 [ 4.751400] usb 2-2: Manufacturer: Chicony Electronics Co., Ltd. [ 4.751402] usb 2-2: SerialNumber: SN0001 [ 4.751489] usb 2-2: configuration #1 chosen from 1 choice [ 6.018372] udev: starting version 141 [ 6.018388] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly [ 6.656888] ACPI: AC Adapter [AC] (on-line) [ 6.665498] input: Power Button (FF) as /class/input/input2 [ 6.700608] ACPI: Power Button (FF) [PWRF] [ 6.757083] ACPI: Battery Slot [BAT0] (battery present) [ 6.757201] input: Sleep Button (CM) as /class/input/input3 [ 6.773424] input: PC Speaker as /class/input/input4 [ 6.788560] ACPI: Sleep Button (CM) [SLPB] [ 6.788634] ACPI: WMI: Mapper loaded [ 6.788701] input: Lid Switch as /class/input/input5 [ 6.804739] ACPI: Lid Switch [LID] [ 6.846185] acpi device:03: registered as cooling_device6 [ 6.846851] input: Video Bus as /class/input/input6 [ 6.876574] ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no) [ 6.973847] Linux video capture interface: v2.00 [ 6.999180] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 7.018923] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0 [ 7.018928] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 7.018994] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.110053] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 7.190008] uvcvideo: Found UVC 1.00 device CKF7063 (04f2:b083) [ 7.191454] input: CKF7063 as /class/input/input7 [ 7.220643] usbcore: registered new interface driver uvcvideo [ 7.220648] USB Video Class driver (v0.1.0) [ 7.519534] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0x200000 [ 7.561699] input: SynPS/2 Synaptics TouchPad as /class/input/input8 [ 7.845925] HDA Intel 0000:00:14.2: power state changed by ACPI to D0 [ 7.845971] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 10.140909] Adding 248968k swap on /dev/sda7. Priority:-1 extents:1 across:248968k [ 10.548603] EXT3 FS on sda9, internal journal [ 11.247462] loop: module loaded [ 12.274817] kjournald starting. Commit interval 5 seconds [ 12.275161] EXT3 FS on sda10, internal journal [ 12.275168] EXT3-fs: mounted filesystem with ordered data mode. [ 12.305587] kjournald starting. Commit interval 5 seconds [ 12.306047] EXT3 FS on sda11, internal journal [ 12.306051] EXT3-fs: mounted filesystem with ordered data mode. [ 12.306241] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 12.394791] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 13.569090] sky2 eth0: enabling interface [ 14.716331] powernow-k8: Found 1 AMD Athlon(tm)X2 DualCore QL-62 processors (2 cpu cores) (version 2.20.00) [ 14.716383] powernow-k8: 0 : pstate 0 (2000 MHz) [ 14.716387] powernow-k8: 1 : pstate 1 (1000 MHz) [ 15.169664] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx [ 15.585307] NET: Registered protocol family 10 [ 15.585851] lo: Disabled Privacy Extensions [ 19.441131] Bluetooth: Core ver 2.14 [ 19.441258] NET: Registered protocol family 31 [ 19.441262] Bluetooth: HCI device and connection manager initialized [ 19.441269] Bluetooth: HCI socket layer initialized [ 19.553672] Bluetooth: L2CAP ver 2.11 [ 19.553678] Bluetooth: L2CAP socket layer initialized [ 19.846463] Bluetooth: RFCOMM socket layer initialized [ 19.846481] Bluetooth: RFCOMM TTY layer initialized [ 19.846485] Bluetooth: RFCOMM ver 1.10 [ 26.368049] eth0: no IPv6 routers present [ 149.889597] ACPI: Transitioning device [FAN3] to D0 [ 149.889605] ACPI: Unable to turn cooling device [f7035f04] 'on' [ 149.894576] ACPI: Transitioning device [FAN3] to D0 [ 149.894581] ACPI: Unable to turn cooling device [f7035f04] 'on' [ 223.402098] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 223.459244] Linux agpgart interface v0.103 [ 223.518756] [drm] Initialized drm 1.1.0 20060810
Attachment:
Xorg.0.log
Description: Binary data