Bug#523724: Further information as requested
In reply to your questions:
1. I did not change the kernel or anything else that seems relevant.
2. I don't know why direct rendering is shown as disabled in the log
file. glxinfo says it is enabled with both versions of xorg.
3. /proc/mtrr is different with the two versions. With the older
(working) version I get:
reg00: base=0x000000000 ( 0MB), size= 1024MB, count=1: write-back
reg01: base=0x03ff00000 ( 1023MB), size= 1MB, count=1: uncachable
reg02: base=0x0d8000000 ( 3456MB), size= 128MB, count=1: write-combining
With the newer one I get only:
reg00: base=0x000000000 ( 0MB), size= 1024MB, count=1: write-back
reg01: base=0x03ff00000 ( 1023MB), size= 1MB, count=1: uncachable
4. Here is the output from dmesg. I don't know if the stuff about
missing firmware at the bottom is relevant.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.29-1-686 (Debian 2.6.29-2) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-5) ) #1 SMP Sat Apr 4 17:36:29 UTC 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fed0000 (usable)
[ 0.000000] BIOS-e820: 000000003fed0000 - 000000003fedf000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fedf000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x3fed0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 3784e000 - 37fef4f8
[ 0.000000] Allocated new RAMDISK: 004b4000 - 00c554f8
[ 0.000000] Move RAMDISK from 000000003784e000 - 0000000037fef4f7 to 004b4000 - 00c554f7
[ 0.000000] ACPI: RSDP 000F67B0, 0024 (r2 LENOVO)
[ 0.000000] ACPI: XSDT 3FED1C5D, 008C (r1 LENOVO TP-7F 2090 LTP 0)
[ 0.000000] ACPI: FACP 3FED1D00, 00F4 (r3 LENOVO TP-7F 2090 LNVO 1)
[ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe0Block: 64/32 [20081204]
[ 0.000000] ACPI Warning (tbfadt-0568): 32/64X length mismatch in Gpe1Block: 0/32 [20081204]
[ 0.000000] ACPI Warning (tbfadt-0596): Optional field Gpe1Block has zero address or length: 000000000000102C/0 [20081204]
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 3FED2132, CA58 (r1 LENOVO TP-7F 2090 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FEF4000, 0040
[ 0.000000] ACPI: SSDT 3FED1EB4, 027E (r1 LENOVO TP-7F 2090 MSFT 100000E)
[ 0.000000] ACPI: ECDT 3FEDEB8A, 0052 (r1 LENOVO TP-7F 2090 LNVO 1)
[ 0.000000] ACPI: TCPA 3FEDEBDC, 0032 (r2 LENOVO TP-7F 2090 LNVO 1)
[ 0.000000] ACPI: APIC 3FEDEC0E, 0068 (r1 LENOVO TP-7F 2090 LNVO 1)
[ 0.000000] ACPI: MCFG 3FEDEC76, 003C (r1 LENOVO TP-7F 2090 LNVO 1)
[ 0.000000] ACPI: HPET 3FEDECB2, 0038 (r1 LENOVO TP-7F 2090 LNVO 1)
[ 0.000000] ACPI: SLIC 3FEDEE62, 0176 (r1 LENOVO TP-7F 2090 LTP 0)
[ 0.000000] ACPI: BOOT 3FEDEFD8, 0028 (r1 LENOVO TP-7F 2090 LTP 1)
[ 0.000000] ACPI: SSDT 3FEF2686, 025F (r1 LENOVO TP-7F 2090 INTL 20050513)
[ 0.000000] ACPI: SSDT 3FEF28E5, 00A6 (r1 LENOVO TP-7F 2090 INTL 20050513)
[ 0.000000] ACPI: SSDT 3FEF298B, 04F7 (r1 LENOVO TP-7F 2090 INTL 20050513)
[ 0.000000] ACPI: SSDT 3FEF2E82, 01D8 (r1 LENOVO TP-7F 2090 INTL 20050513)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 134MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 00000000 - 377fe000
[ 0.000000] bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00004b0574] TEXT DATA BSS ==> [0000100000 - 00004b0574]
[ 0.000000] #4 [00004b1000 - 00004b4000] INIT_PG_TABLE ==> [00004b1000 - 00004b4000]
[ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00004b4000 - 0000c554f8] NEW RAMDISK ==> [00004b4000 - 0000c554f8]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f67f0] 000f67f0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003fed0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fed0
[ 0.000000] On node 0 totalpages: 261743
[ 0.000000] free_area_init_node: node 0, pgdat c03bf660, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 270 pages used for memmap
[ 0.000000] HighMem zone: 34244 pages, LIFO batch:7
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 32768 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259697
[ 0.000000] Kernel command line: root=/dev/sda1 ro
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.779 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1025964k/1047360k available (1957k kernel code, 20708k reserved, 952k data, 324k init, 138056k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff50000 - 0xfffff000 ( 700 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.004000] .init : 0xc03dd000 - 0xc042e000 ( 324 kB)
[ 0.004000] .data : 0xc02e94c3 - 0xc03d77e8 ( 952 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02e94c3 (1957 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.55 BogoMIPS (lpj=7979116)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] [ds] using Core 2/Atom configuration
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] Intel machine check architecture supported.
[ 0.004000] Intel machine check reporting enabled on CPU#0.
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017929] ACPI: Core revision 20081204
[ 0.040433] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.083015] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3990.01 BogoMIPS (lpj=7980031)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] [ds] using Core 2/Atom configuration
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] Intel machine check architecture supported.
[ 0.004000] Intel machine check reporting enabled on CPU#1.
[ 0.168671] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 0.170085] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.172001] Measured 617496 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.172001] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.172035] Brought up 2 CPUs
[ 0.172155] Total of 2 processors activated (7979.57 BogoMIPS).
[ 0.172325] CPU0 attaching sched-domain:
[ 0.172327] domain 0: span 0-1 level MC
[ 0.172329] groups: 0 1
[ 0.172335] CPU1 attaching sched-domain:
[ 0.172336] domain 0: span 0-1 level MC
[ 0.172338] groups: 1 0
[ 0.176060] net_namespace: 1056 bytes
[ 0.176201] Booting paravirtualized kernel on bare hardware
[ 0.176293] regulator: core version 0.5
[ 0.176418] NET: Registered protocol family 16
[ 0.176418] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.176418] ACPI: bus type pci registered
[ 0.176418] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.176418] PCI: MCFG area at f0000000 reserved in E820
[ 0.176418] PCI: Using MMCONFIG for extended config space
[ 0.176418] PCI: Using configuration type 1 for base access
[ 0.176528] bio: create slab <bio-0> at 0
[ 0.181138] ACPI: EC: EC description table is found, configuring boot EC
[ 0.188584] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.193942] ACPI: Interpreter enabled
[ 0.194064] ACPI: (supports S0 S3 S4 S5)
[ 0.194625] ACPI: Using IOAPIC for interrupt routing
[ 0.208661] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.208661] ACPI: EC: driver started in interrupt mode
[ 0.212905] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.213428] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.213573] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.213573] pci 0000:00:01.0: PME# disabled
[ 0.213573] pci 0000:00:1b.0: reg 10 64bit mmio: [0xee400000-0xee403fff]
[ 0.213573] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.213573] pci 0000:00:1b.0: PME# disabled
[ 0.213573] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.213573] pci 0000:00:1c.0: PME# disabled
[ 0.213573] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.213573] pci 0000:00:1c.1: PME# disabled
[ 0.213573] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.213609] pci 0000:00:1c.2: PME# disabled
[ 0.216024] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.216147] pci 0000:00:1c.3: PME# disabled
[ 0.216329] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
[ 0.216395] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
[ 0.216460] pci 0000:00:1d.2: reg 20 io port: [0x1840-0x185f]
[ 0.216526] pci 0000:00:1d.3: reg 20 io port: [0x1860-0x187f]
[ 0.216596] pci 0000:00:1d.7: reg 10 32bit mmio: [0xee404000-0xee4043ff]
[ 0.216661] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.216784] pci 0000:00:1d.7: PME# disabled
[ 0.217070] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.217201] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.217323] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.217453] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.217583] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.217763] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.217771] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.217779] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.217787] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.217795] pci 0000:00:1f.1: reg 20 io port: [0x1880-0x188f]
[ 0.217862] pci 0000:00:1f.2: reg 10 io port: [0x18c8-0x18cf]
[ 0.217870] pci 0000:00:1f.2: reg 14 io port: [0x18ac-0x18af]
[ 0.217878] pci 0000:00:1f.2: reg 18 io port: [0x18c0-0x18c7]
[ 0.217885] pci 0000:00:1f.2: reg 1c io port: [0x18a8-0x18ab]
[ 0.217893] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.217901] pci 0000:00:1f.2: reg 24 32bit mmio: [0xee404400-0xee4047ff]
[ 0.217940] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.218061] pci 0000:00:1f.2: PME# disabled
[ 0.218242] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.218340] pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
[ 0.218353] pci 0000:01:00.0: reg 14 io port: [0x2000-0x20ff]
[ 0.218366] pci 0000:01:00.0: reg 18 32bit mmio: [0xee000000-0xee00ffff]
[ 0.218405] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.218458] pci 0000:01:00.0: supports D1 D2
[ 0.218528] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.218531] pci 0000:00:01.0: bridge 32bit mmio: [0xee000000-0xee0fffff]
[ 0.218536] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff]
[ 0.218635] pci 0000:02:00.0: reg 10 64bit mmio: [0xee100000-0xee10ffff]
[ 0.218734] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.218858] pci 0000:02:00.0: PME# disabled
[ 0.219078] pci 0000:00:1c.0: bridge 32bit mmio: [0xee100000-0xee1fffff]
[ 0.219269] pci 0000:03:00.0: reg 10 32bit mmio: [0xedf00000-0xedf00fff]
[ 0.219515] pci 0000:03:00.0: PME# supported from D0 D3hot
[ 0.219687] pci 0000:03:00.0: PME# disabled
[ 0.219947] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
[ 0.219952] pci 0000:00:1c.1: bridge 32bit mmio: [0xec000000-0xedffffff]
[ 0.219960] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe4000000-0xe40fffff]
[ 0.220046] pci 0000:00:1c.2: bridge io port: [0x5000-0x6fff]
[ 0.220051] pci 0000:00:1c.2: bridge 32bit mmio: [0xe8000000-0xe9ffffff]
[ 0.220059] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe4100000-0xe41fffff]
[ 0.220119] pci 0000:00:1c.3: bridge io port: [0x7000-0x8fff]
[ 0.220124] pci 0000:00:1c.3: bridge 32bit mmio: [0xea000000-0xebffffff]
[ 0.220132] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe4200000-0xe42fffff]
[ 0.220185] pci 0000:15:00.0: reg 10 32bit mmio: [0xe4300000-0xe4300fff]
[ 0.220216] pci 0000:15:00.0: supports D1 D2
[ 0.220218] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.220343] pci 0000:15:00.0: PME# disabled
[ 0.220513] pci 0000:15:00.1: reg 10 32bit mmio: [0xe4302000-0xe43027ff]
[ 0.220523] pci 0000:15:00.1: reg 14 32bit mmio: [0xe4304000-0xe4307fff]
[ 0.220593] pci 0000:15:00.1: supports D1 D2
[ 0.220595] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot
[ 0.220719] pci 0000:15:00.1: PME# disabled
[ 0.220887] pci 0000:15:00.2: reg 10 32bit mmio: [0xe4301000-0xe4301fff]
[ 0.220964] pci 0000:15:00.2: supports D1 D2
[ 0.220966] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot
[ 0.221089] pci 0000:15:00.2: PME# disabled
[ 0.221258] pci 0000:15:00.3: reg 10 32bit mmio: [0xe4302800-0xe43028ff]
[ 0.221335] pci 0000:15:00.3: supports D1 D2
[ 0.221337] pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot
[ 0.221461] pci 0000:15:00.3: PME# disabled
[ 0.221656] pci 0000:00:1e.0: transparent bridge
[ 0.221777] pci 0000:00:1e.0: bridge io port: [0x9000-0xcfff]
[ 0.221782] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4300000-0xe7ffffff]
[ 0.221790] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe0000000-0xe3ffffff]
[ 0.221850] pci_bus 0000:00: on NUMA node 0
[ 0.221856] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.221976] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.222047] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.222120] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.222193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.222267] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.222341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.224202] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.228756] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.230153] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.231553] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.232974] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.234372] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.235769] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.237185] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.238462] ACPI: Power Resource [PUBS] (on)
[ 0.238462] PCI: Using ACPI for IRQ routing
[ 0.256026] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.256575] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.264014] Switched to high resolution mode on CPU 0
[ 0.267594] Switched to high resolution mode on CPU 1
[ 0.280013] pnp: PnP ACPI init
[ 0.280137] ACPI: bus type pnp registered
[ 0.284783] pnp: PnP ACPI: found 12 devices
[ 0.284903] ACPI: ACPI bus type pnp unregistered
[ 0.285025] PnPBIOS: Disabled by ACPI PNP
[ 0.285149] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.285270] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 0.285390] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 0.285511] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[ 0.285632] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[ 0.285752] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[ 0.285872] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[ 0.285992] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.286112] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.286232] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.286353] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.286473] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.286594] system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.286721] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
[ 0.286850] system 00:00: iomem range 0xfed41000-0xffffffff could not be reserved
[ 0.286982] system 00:02: ioport range 0x164e-0x164f has been reserved
[ 0.287103] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.287223] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.287344] system 00:02: ioport range 0x800-0x80f has been reserved
[ 0.287464] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.287584] system 00:02: ioport range 0x1600-0x165f could not be reserved
[ 0.287704] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.287825] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.287947] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.288079] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.288200] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.323419] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.323541] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.323660] pci 0000:00:01.0: MEM window: 0xee000000-0xee0fffff
[ 0.323781] pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff
[ 0.323912] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.324040] pci 0000:00:1c.0: IO window: disabled
[ 0.324163] pci 0000:00:1c.0: MEM window: 0xee100000-0xee1fffff
[ 0.324285] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.324409] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.324529] pci 0000:00:1c.1: IO window: 0x3000-0x4fff
[ 0.324653] pci 0000:00:1c.1: MEM window: 0xec000000-0xedffffff
[ 0.324775] pci 0000:00:1c.1: PREFETCH window: 0x000000e4000000-0x000000e40fffff
[ 0.324908] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.325031] pci 0000:00:1c.2: IO window: 0x5000-0x6fff
[ 0.325154] pci 0000:00:1c.2: MEM window: 0xe8000000-0xe9ffffff
[ 0.325276] pci 0000:00:1c.2: PREFETCH window: 0x000000e4100000-0x000000e41fffff
[ 0.325409] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
[ 0.325531] pci 0000:00:1c.3: IO window: 0x7000-0x8fff
[ 0.325654] pci 0000:00:1c.3: MEM window: 0xea000000-0xebffffff
[ 0.325776] pci 0000:00:1c.3: PREFETCH window: 0x000000e4200000-0x000000e42fffff
[ 0.325912] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
[ 0.326031] pci 0000:15:00.0: IO window: 0x009000-0x0090ff
[ 0.326154] pci 0000:15:00.0: IO window: 0x009400-0x0094ff
[ 0.326278] pci 0000:15:00.0: PREFETCH window: 0xe0000000-0xe3ffffff
[ 0.326401] pci 0000:15:00.0: MEM window: 0x50000000-0x53ffffff
[ 0.326525] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
[ 0.326646] pci 0000:00:1e.0: IO window: 0x9000-0xcfff
[ 0.326769] pci 0000:00:1e.0: MEM window: 0xe4300000-0xe7ffffff
[ 0.326892] pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e3ffffff
[ 0.327033] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.327155] pci 0000:00:01.0: setting latency timer to 64
[ 0.327164] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.327287] pci 0000:00:1c.0: setting latency timer to 64
[ 0.327296] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.327419] pci 0000:00:1c.1: setting latency timer to 64
[ 0.327429] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.327552] pci 0000:00:1c.2: setting latency timer to 64
[ 0.327561] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.327684] pci 0000:00:1c.3: setting latency timer to 64
[ 0.327689] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 0.327813] pci 0000:00:1e.0: setting latency timer to 64
[ 0.327823] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.327948] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.327951] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.327953] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 0.327955] pci_bus 0000:01: resource 1 mem: [0xee000000-0xee0fffff]
[ 0.327957] pci_bus 0000:01: resource 2 mem: [0xd8000000-0xdfffffff]
[ 0.327959] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[ 0.327962] pci_bus 0000:02: resource 0 mem: [0x0-0x0]
[ 0.327964] pci_bus 0000:02: resource 1 mem: [0xee100000-0xee1fffff]
[ 0.327966] pci_bus 0000:02: resource 2 mem: [0x0-0x0]
[ 0.327967] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.327970] pci_bus 0000:03: resource 0 io: [0x3000-0x4fff]
[ 0.327972] pci_bus 0000:03: resource 1 mem: [0xec000000-0xedffffff]
[ 0.327974] pci_bus 0000:03: resource 2 mem: [0xe4000000-0xe40fffff]
[ 0.327976] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[ 0.327978] pci_bus 0000:04: resource 0 io: [0x5000-0x6fff]
[ 0.327980] pci_bus 0000:04: resource 1 mem: [0xe8000000-0xe9ffffff]
[ 0.327982] pci_bus 0000:04: resource 2 mem: [0xe4100000-0xe41fffff]
[ 0.327984] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[ 0.327986] pci_bus 0000:0c: resource 0 io: [0x7000-0x8fff]
[ 0.327989] pci_bus 0000:0c: resource 1 mem: [0xea000000-0xebffffff]
[ 0.327991] pci_bus 0000:0c: resource 2 mem: [0xe4200000-0xe42fffff]
[ 0.327993] pci_bus 0000:0c: resource 3 mem: [0x0-0x0]
[ 0.327995] pci_bus 0000:15: resource 0 io: [0x9000-0xcfff]
[ 0.327997] pci_bus 0000:15: resource 1 mem: [0xe4300000-0xe7ffffff]
[ 0.328009] pci_bus 0000:15: resource 2 mem: [0xe0000000-0xe3ffffff]
[ 0.328011] pci_bus 0000:15: resource 3 io: [0x00-0xffff]
[ 0.328013] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffff]
[ 0.328015] pci_bus 0000:16: resource 0 io: [0x9000-0x90ff]
[ 0.328017] pci_bus 0000:16: resource 1 io: [0x9400-0x94ff]
[ 0.328019] pci_bus 0000:16: resource 2 mem: [0xe0000000-0xe3ffffff]
[ 0.328021] pci_bus 0000:16: resource 3 mem: [0x50000000-0x53ffffff]
[ 0.328083] NET: Registered protocol family 2
[ 0.376073] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.376488] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.376993] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.377311] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.377431] TCP reno registered
[ 0.388078] NET: Registered protocol family 1
[ 0.388294] checking if image is initramfs... it is
[ 0.946248] Freeing initrd memory: 7813k freed
[ 0.946578] Simple Boot Flag at 0x35 set to 0x1
[ 0.947626] audit: initializing netlink socket (disabled)
[ 0.947763] type=2000 audit(1239800447.944:1): initialized
[ 0.948117] highmem bounce pool size: 64 pages
[ 0.948239] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.948469] VFS: Disk quotas dquot_6.5.2
[ 0.948628] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.948807] msgmni has been set to 1750
[ 0.949089] alg: No test for stdrng (krng)
[ 0.949277] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.949407] io scheduler noop registered
[ 0.949525] io scheduler anticipatory registered
[ 0.949643] io scheduler deadline registered
[ 0.949774] io scheduler cfq registered (default)
[ 0.950025] pci 0000:01:00.0: Boot video device
[ 0.950150] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.950211] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.950347] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.950427] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.950631] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.950711] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.950918] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.950997] pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X
[ 0.951201] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.951280] pcieport-driver 0000:00:1c.3: irq 28 for MSI/MSI-X
[ 0.951790] isapnp: Scanning for PnP cards...
[ 1.306658] isapnp: No Plug & Play device found
[ 1.310586] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.313501] brd: module loaded
[ 1.313730] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.323907] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.324039] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.324292] mice: PS/2 mouse device common for all mice
[ 1.324494] rtc_cmos 00:07: RTC can wake from S4
[ 1.324673] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.324823] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.324983] cpuidle: using governor ladder
[ 1.325103] cpuidle: using governor menu
[ 1.325224] No iBFT detected.
[ 1.325708] TCP cubic registered
[ 1.325828] NET: Registered protocol family 17
[ 1.325954] Using IPI No-Shortcut mode
[ 1.326222] registered taskstats version 1
[ 1.326507] rtc_cmos 00:07: setting system clock to 2009-04-15 13:00:48 UTC (1239800448)
[ 1.326844] Freeing unused kernel memory: 324k freed
[ 1.330359] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.425663] ACPI: SSDT 3FEF1D25, 0282 (r1 PmRef Cpu0Ist 100 INTL 20050513)
[ 1.426522] ACPI: SSDT 3FEF202C, 065A (r1 PmRef Cpu0Cst 100 INTL 20050513)
[ 1.430027] Monitor-Mwait will be used to enter C-1 state
[ 1.430034] Monitor-Mwait will be used to enter C-2 state
[ 1.430040] Monitor-Mwait will be used to enter C-3 state
[ 1.430290] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.430907] processor ACPI_CPU:00: registered as cooling_device0
[ 1.431030] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.431689] ACPI: SSDT 3FEF1C5D, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513)
[ 1.432513] ACPI: SSDT 3FEF1FA7, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513)
[ 1.434904] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.435492] processor ACPI_CPU:01: registered as cooling_device1
[ 1.435614] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.439715] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.443505] ACPI: Thermal Zone [THM0] (51 C)
[ 1.444698] thermal LNXTHERM:02: registered as thermal_zone1
[ 1.446094] ACPI: Thermal Zone [THM1] (49 C)
[ 1.491213] Linux agpgart interface v0.103
[ 1.500777] tg3.c:v3.97 (December 10, 2008)
[ 1.500915] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.501059] tg3 0000:02:00.0: setting latency timer to 64
[ 1.514933] tg3 0000:02:00.0: PME# disabled
[ 1.517024] usbcore: registered new interface driver usbfs
[ 1.517175] usbcore: registered new interface driver hub
[ 1.517338] usbcore: registered new device driver usb
[ 1.525172] eth0: Tigon3 [partno(BCM95752m) rev 6002] (PCI Express) MAC address 00:16:36:ca:5d:9c
[ 1.525313] eth0: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.525444] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.525563] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.525715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.526477] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 1.526610] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.526797] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.526801] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.526957] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.530980] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.531105] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.531121] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee404000
[ 1.538696] firewire_ohci 0000:15:00.1: enabling device (0000 -> 0002)
[ 1.538825] firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.538960] firewire_ohci 0000:15:00.1: setting latency timer to 64
[ 1.546909] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.548017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.548176] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.548298] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.548426] usb usb1: Product: EHCI Host Controller
[ 1.548544] usb usb1: Manufacturer: Linux 2.6.29-1-686 ehci_hcd
[ 1.548664] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.548844] usb usb1: configuration #1 chosen from 1 choice
[ 1.548988] hub 1-0:1.0: USB hub found
[ 1.549115] hub 1-0:1.0: 8 ports detected
[ 1.549877] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.550003] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.550132] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.550136] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.550276] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.550440] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
[ 1.550586] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.550707] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.550835] usb usb2: Product: UHCI Host Controller
[ 1.550954] usb usb2: Manufacturer: Linux 2.6.29-1-686 uhci_hcd
[ 1.551073] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.551236] usb usb2: configuration #1 chosen from 1 choice
[ 1.551379] hub 2-0:1.0: USB hub found
[ 1.551502] hub 2-0:1.0: 2 ports detected
[ 1.551711] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.551837] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.551841] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.551979] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.552168] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
[ 1.552319] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.552440] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.552568] usb usb3: Product: UHCI Host Controller
[ 1.552685] usb usb3: Manufacturer: Linux 2.6.29-1-686 uhci_hcd
[ 1.552805] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.552981] usb usb3: configuration #1 chosen from 1 choice
[ 1.553142] hub 3-0:1.0: USB hub found
[ 1.553265] hub 3-0:1.0: 2 ports detected
[ 1.553478] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.553605] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.553608] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.553746] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.553904] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 1.554054] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.554174] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.554301] usb usb4: Product: UHCI Host Controller
[ 1.554419] usb usb4: Manufacturer: Linux 2.6.29-1-686 uhci_hcd
[ 1.554538] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.554698] usb usb4: configuration #1 chosen from 1 choice
[ 1.554840] hub 4-0:1.0: USB hub found
[ 1.554961] hub 4-0:1.0: 2 ports detected
[ 1.555172] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.555298] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.555302] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.555442] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.555595] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860
[ 1.555756] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.555877] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.556014] usb usb5: Product: UHCI Host Controller
[ 1.556132] usb usb5: Manufacturer: Linux 2.6.29-1-686 uhci_hcd
[ 1.556251] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.556408] usb usb5: configuration #1 chosen from 1 choice
[ 1.556552] hub 5-0:1.0: USB hub found
[ 1.556673] hub 5-0:1.0: 2 ports detected
[ 1.556920] Uniform Multi-Platform E-IDE driver
[ 1.568261] SCSI subsystem initialized
[ 1.569624] sdhci: Secure Digital Host Controller Interface driver
[ 1.569747] sdhci: Copyright(c) Pierre Ossman
[ 1.571667] piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
[ 1.571796] PIIX_IDE 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 1.571925] piix 0000:00:1f.1: IDE port disabled
[ 1.572051] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 1.572176] ide0: BM-DMA at 0x1880-0x1887
[ 1.572300] Probing IDE interface ide0...
[ 1.598046] libata version 3.00 loaded.
[ 1.613032] firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.10
[ 1.613291] sdhci-pci 0000:15:00.3: SDHCI controller found [104c:803c] (rev 0)
[ 1.613443] sdhci-pci 0000:15:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.613641] sdhci-pci 0000:15:00.3: setting latency timer to 64
[ 1.613673] Registered led device: mmc0::
[ 1.613828] mmc0: SDHCI controller on PCI [0000:15:00.3] using DMA
[ 1.676087] udev: renamed network interface eth0 to eth3
[ 1.860061] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 1.992439] usb 1-5: New USB device found, idVendor=0424, idProduct=2502
[ 1.992563] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.992752] usb 1-5: configuration #1 chosen from 1 choice
[ 1.992936] hub 1-5:1.0: USB hub found
[ 1.993161] hub 1-5:1.0: 2 ports detected
[ 2.001039] Clocksource tsc unstable (delta = -201188452 ns)
[ 2.112099] firewire_core: created device fw0: GUID 00061b002025c8c6, S400
[ 2.308354] hda: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive
[ 2.376050] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 2.553084] usb 4-2: New USB device found, idVendor=0483, idProduct=2016
[ 2.553206] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.553326] usb 4-2: Product: Biometric Coprocessor
[ 2.553445] usb 4-2: Manufacturer: STMicroelectronics
[ 2.553611] usb 4-2: configuration #1 chosen from 1 choice
[ 2.640190] usb 1-5.2: new high speed USB device using ehci_hcd and address 4
[ 2.644083] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.644954] hda: UDMA/33 mode selected
[ 2.645463] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.649075] ahci 0000:00:1f.2: version 3.0
[ 2.649091] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.649288] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 2.649359] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 2.649497] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 2.649621] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.649775] scsi0 : ahci
[ 2.650023] scsi1 : ahci
[ 2.650196] scsi2 : ahci
[ 2.650363] scsi3 : ahci
[ 2.650556] ata1: SATA max UDMA/133 abar m1024@0xee404400 port 0xee404500 irq 29
[ 2.650687] ata2: DUMMY
[ 2.650806] ata3: DUMMY
[ 2.650924] ata4: DUMMY
[ 2.734689] usb 1-5.2: New USB device found, idVendor=0c45, idProduct=627b
[ 2.734813] usb 1-5.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.734943] usb 1-5.2: Product: USB20 Camera
[ 2.735113] usb 1-5.2: configuration #1 chosen from 1 choice
[ 3.140066] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.141027] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 3.141030] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 3.141152] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 3.612708] ata1.00: ATA-7: TOSHIBA MK1234GSX, AH002E, max UDMA/100
[ 3.612830] ata1.00: 234441648 sectors, multi 16: LBA48
[ 3.614316] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 3.614318] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 3.614441] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 3.615695] ata1.00: configured for UDMA/100
[ 3.630483] ata1.00: configured for UDMA/100
[ 3.630603] ata1: EH complete
[ 3.630822] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5
[ 3.638820] ide-cd driver 5.00
[ 3.641124] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 3.641895] Uniform CD-ROM driver Revision: 3.20
[ 3.642081] Driver 'sd' needs updating - please use bus_type methods
[ 3.642271] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 3.642411] sd 0:0:0:0: [sda] Write Protect is off
[ 3.642529] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.642550] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.642736] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 3.642874] sd 0:0:0:0: [sda] Write Protect is off
[ 3.642992] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.643012] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.643142] sda: sda1 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 3.755351] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.264561] PM: Starting manual resume from disk
[ 4.298921] kjournald starting. Commit interval 5 seconds
[ 4.299051] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.868191] udev: starting version 140
[ 6.306777] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 6.320050] ACPI: Power Button (FF) [PWRF]
[ 6.320238] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 6.320883] ACPI: Lid Switch [LID]
[ 6.321056] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 6.336538] ACPI: Sleep Button (CM) [SLPB]
[ 6.348342] ACPI: AC Adapter [AC] (on-line)
[ 6.464739] ACPI: Battery Slot [BAT0] (battery present)
[ 6.983991] NET: Registered protocol family 23
[ 7.304834] Non-volatile memory driver v1.3
[ 7.416076] cfg80211: Using static regulatory domain info
[ 7.416215] cfg80211: Regulatory domain: US
[ 7.416334] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.416464] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 7.416587] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.416707] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.416830] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.416953] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.417077] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 7.417198] cfg80211: Calling CRDA for country: US
[ 7.460526] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 7.560265] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2028]
[ 7.560422] yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
[ 7.560550] yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to ISA
[ 7.560675] yenta_cardbus 0000:15:00.0: TI: mfunc 0x01db1b22, devctl 0x64
[ 7.565038] intel_rng: FWH not detected
[ 7.580731] nsc-ircc 00:0a: activated
[ 7.580878] nsc-ircc, chip->init
[ 7.581011] nsc-ircc, Found chip at base=0x164e
[ 7.581169] nsc-ircc, driver loaded (Dag Brattli)
[ 7.581310] irda0 (): not using net_device_ops yet
[ 7.581705] IrDA: Registered device irda0
[ 7.581825] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 7.613198] lib80211: common routines for IEEE802.11 drivers
[ 7.613326] lib80211_crypt: registered algorithm 'NULL'
[ 7.637450] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 7.741254] thinkpad_acpi: ThinkPad ACPI Extras v0.22
[ 7.741381] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 7.741499] thinkpad_acpi: ThinkPad BIOS 7FET91WW (2.09 ), EC 7FHT26WW-1.08
[ 7.741621] thinkpad_acpi: Lenovo ThinkPad Z61m, model 9450HAG
[ 7.743082] thinkpad_acpi: radio switch found; radios are enabled
[ 7.743296] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 7.743428] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 7.760152] Registered led device: tpacpi::thinklight
[ 7.760346] Registered led device: tpacpi::power
[ 7.760509] Registered led device: tpacpi:orange:batt
[ 7.760657] Registered led device: tpacpi:green:batt
[ 7.760793] Registered led device: tpacpi::dock_active
[ 7.760924] Registered led device: tpacpi::bay_active
[ 7.761057] Registered led device: tpacpi::dock_batt
[ 7.761190] Registered led device: tpacpi::unknown_led
[ 7.761325] Registered led device: tpacpi::standby
[ 7.763857] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 7.764235] input: ThinkPad Extra Buttons as /devices/virtual/input/input5
[ 7.792904] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cf0, PCI irq 16
[ 7.793031] yenta_cardbus 0000:15:00.0: Socket status: 30000086
[ 7.793171] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
[ 7.793299] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x9000-0xcfff: clean.
[ 7.794464] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
[ 7.794594] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
[ 7.795163] tifm_7xx1 0000:15:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.795300] tifm_7xx1 0000:15:00.2: setting latency timer to 64
[ 7.807075] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 7.807289] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 7.807463] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.823455] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 7.823591] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 7.823809] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 7.823983] iwl3945 0000:03:00.0: setting latency timer to 64
[ 7.880929] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 7.881055] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 7.882864] iwl3945 0000:03:00.0: PCI INT A disabled
[ 7.883387] wmaster0 (iwl3945): not using net_device_ops yet
[ 7.883830] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 7.993464] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 8.007605] wlan0 (iwl3945): not using net_device_ops yet
[ 8.011961] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input6
[ 8.104128] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 8.104264] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[ 8.104441] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.182851] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 8.185354] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 8.186737] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 8.187744] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 8.188939] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 9.876098] Adding 4008176k swap on /dev/sda5. Priority:-1 extents:1 across:4008176k
[ 10.228478] EXT3 FS on sda1, internal journal
[ 10.970651] loop: module loaded
[ 11.073355] device-mapper: uevent: version 1.0.3
[ 11.073947] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 11.698476] fuse init (API version 7.11)
[ 11.914942] kjournald starting. Commit interval 5 seconds
[ 11.915364] EXT3 FS on sda7, internal journal
[ 11.915592] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.763469] tg3 0000:02:00.0: PME# disabled
[ 13.763680] tg3 0000:02:00.0: irq 30 for MSI/MSI-X
[ 15.381407] tg3: eth3: Link is up at 100 Mbps, full duplex.
[ 15.381552] tg3: eth3: Flow control is off for TX and off for RX.
[ 16.041123] NET: Registered protocol family 10
[ 16.042337] lo: Disabled Privacy Extensions
[ 17.150830] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it
[ 17.150976] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
[ 24.703563] Bluetooth: Core ver 2.14
[ 24.703808] NET: Registered protocol family 31
[ 24.703944] Bluetooth: HCI device and connection manager initialized
[ 24.704093] Bluetooth: HCI socket layer initialized
[ 24.782299] Bluetooth: L2CAP ver 2.11
[ 24.782441] Bluetooth: L2CAP socket layer initialized
[ 24.888888] Bluetooth: RFCOMM socket layer initialized
[ 24.889045] Bluetooth: RFCOMM TTY layer initialized
[ 24.889187] Bluetooth: RFCOMM ver 1.10
[ 26.608048] eth3: no IPv6 routers present
[ 44.721526] pci 0000:01:00.0: power state changed by ACPI to D0
[ 44.721549] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 44.825821] [drm] Initialized drm 1.1.0 20060810
[ 44.843809] pci 0000:01:00.0: setting latency timer to 64
[ 44.844178] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 46.024870] [drm] Setting GART location based on new memory map
[ 46.027874] [drm] Loading R500 Microcode
[ 46.027881] platform radeon_cp.0: firmware: requesting radeon/R520_cp.bin
[ 46.079325] radeon_cp: Failed to load firmware "radeon/R520_cp.bin"
[ 46.079332] [drm:radeon_do_init_cp] *ERROR* Failed to load firmware!
--
Anthony Campbell - ac@acampbell.org.uk
Microsoft-free zone - Using Debian GNU/Linux
http://www.acampbell.org.uk (blog, book reviews,
and sceptical articles)
Reply to: