--- Begin Message ---
Package: xserver-xorg-video-intel
Version: 2:2.6.3-1
Severity: important
Since upgrading to 2.6.3, overlay no longer works - I just get a
green-screen with no video. Textured video works OK. Hardware is the G35
chipset.
I'm forcing the use of overlay using the XvPreferOverlay option. I was
previously using version 2.4.2-1 of the driver (as included in unstable)
patched to allow textured video to be disabled (thus forcing the use of
overlay), which worked fine.
Using overlay is the only way to get video without tearing (as
reported/discussed in bug #453754).
-- Package-specific info:
Contents of /var/lib/x11/X.roster:
xserver-xorg
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 2009-01-31 21:31 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1876400 2009-04-09 00:45 /usr/bin/Xorg
Contents of /var/lib/x11/xorg.conf.roster:
xserver-xorg
VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation 82G35 Express Integrated
Graphics Controller (rev 03)
/etc/X11/xorg.conf does not match checksum in /var/lib/x11/xorg.conf.md5sum.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1413 2009-04-10 22:52 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
Driver "intel"
Option "SWCursor" "false"
# Option "TexturedVideo" "false"
Option "XvPreferOverlay" "true"
Option "monitor-HDMI-1" "Configured Monitor"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
Modeline "1920x1080" 148.5 1920 1932 1996 2064 1080 1085 1090 1129
Option "PreferredMode" "1920x1080"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
SubSection "Display"
Modes "1920x1080"
Depth 24
EndSubSection
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 28011 2009-04-10 22:54 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-1-amd64 x86_64 Debian
Current Operating System: Linux grapefruit 2.6.28.9 #13 SMP Wed Apr 8 18:43:04
BST 2009 x86_64
Build Date: 08 April 2009 11:41:45PM
xorg-server 2:1.6.0-1 (jcristau@debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 10 22:48:49 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xd40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82G35 Express Integrated Graphics
Controller rev 3, Mem @ 0xfe800000/1048576, 0xd0000000/268435456, I/O @
0x0000dc00/8
(--) PCI: (0@0:2:1) Intel Corporation 82G35 Express Integrated Graphics
Controller rev 3, Mem @ 0xfe900000/1048576
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.6.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "SWcursor" "false"
(**) intel(0): Option "XvPreferOverlay" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) G35
(--) intel(0): Chipset: "G35"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFE800000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(**) intel(0): Option "PreferredMode" "1920x1080"
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered
at address 0x70.
(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
(II) intel(0): Output HDMI-1 using monitor section Configured Monitor
(II) intel(0): SDVOB: device VID/DID: 04:AE.00, clock range 25.0MHz - 165.0MHz
(II) intel(0): SDVOB: 1 input channel
(II) intel(0): SDVOB: TMDS0 output reported
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered
at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Current clock rate multiplier: 8
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): EDID for output VGA
(II) intel(0): I2C device "SDVOB DDC Bus:E-EDID segment register" registered
at address 0x60.
(II) intel(0): I2C device "SDVOB DDC Bus:ddc2" registered at address 0xA0.
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID for output HDMI-1
(II) intel(0): Manufacturer: ATT Model: 0 Serial#: 0
(II) intel(0): Year: 2006 Week: 48
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 104 vert.: 58
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595
(II) intel(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 640x480@60Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 27.0 MHz Image Size: 820 x 461 mm
(II) intel(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858
h_border: 0
(II) intel(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525
v_border: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 27.0 MHz Image Size: 531 x 398 mm
(II) intel(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864
h_border: 0
(II) intel(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625
v_border: 0
(II) intel(0): Monitor name: LCD HDTV
(II) intel(0): Ranges: V min: 59 V max: 61 Hz, H min: 15 H max: 46 kHz,
PixClock max 80 MHz
(II) intel(0): Number of EDID sections to follow: 1
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff000694000000000000
(II) intel(0): 3010010380683a780a0dc9a057479827
(II) intel(0): 12484c20000001010101010101010101
(II) intel(0): 0101010101018c0ad08a20e02d10103e
(II) intel(0): 960034cd310000188c0ad09020403120
(II) intel(0): 0c405500138e21000018000000fc004c
(II) intel(0): 434420484454560a20202020000000fd
(II) intel(0): 003b3d0f2e08000a202020202020012a
(II) intel(0): 02031b71478510031f11131423090707
(II) intel(0): 8301000066030c00100000011d801871
(II) intel(0): 1c1620582c250034cd3100009e023a80
(II) intel(0): 1871382d40582c450034cd3100001e01
(II) intel(0): 1d00bc52d01e20b828554034cd310000
(II) intel(0): 1e011d80d0721c1620102c258034cd31
(II) intel(0): 00009e023a80d072382d40102c458034
(II) intel(0): cd3100001e000000000000000000002b
(II) intel(0): EDID vendor "ATT", prod id 0
(II) intel(0): Printing probed modes for output HDMI-1
(II) intel(0): Modeline "1920x1080"x63.7 148.50 1920 1932 1996 2064 1080
1085 1090 1129 (71.9 kHz)
(II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495
525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586
625 -hsync -vsync (31.2 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(II) intel(0): Output VGA disconnected
(II) intel(0): Output HDMI-1 connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output HDMI-1 using initial mode 1920x1080
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 489216 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1956860 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xfe800000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 44236800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): Current clock rate multiplier: 8
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0b5d0000 (pgoffset 46544)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0e000000 (pgoffset 57344)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0b5cffff: DRI memory manager (178500 kB)
(II) intel(0): 0x0b5d0000-0x0dffffff: exa offscreen (43200 kB)
(II) intel(0): 0x0e000000-0x0fffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x015aefff: depth buffer (14400 kB) Y tiled
(II) intel(0): 0x0179f000-0x025aefff: back buffer (14400 kB) X tiled
(II) intel(0): 0x0279f000-0x035aefff: front buffer (14400 kB) X tiled
(II) intel(0): 0x0379f000-0x0379ffff: overlay registers (4 kB)
(II) intel(0): 0x037a0000-0x037a9fff: HW cursors (40 kB)
(II) intel(0): 0x0b5d0000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output HDMI-1 is connected to pipe A
(II) intel(0): [drm] mapped front buffer at 0xd279f000, handle = 0xd279f000
(II) intel(0): [drm] mapped back buffer at 0xd179f000, handle = 0xd179f000
(II) intel(0): [drm] mapped depth buffer at 0xd079f000, handle = 0xd079f000
(II) intel(0): [drm] mapped classic textures at 0xde000000, handle =
0xde000000
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: XF86DRI Enabled
(WW) intel(0): Option "PreferredMode" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 820 x 461
(II) config/hal: Adding input device TopSeed Tech Corp. USB IR Combo Device
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) TopSeed Tech Corp. USB IR Combo Device: always reports core events
(**) TopSeed Tech Corp. USB IR Combo Device: Device: "/dev/input/event4"
(II) TopSeed Tech Corp. USB IR Combo Device: Found 3 mouse buttons
(II) TopSeed Tech Corp. USB IR Combo Device: Found x and y relative axes
(II) TopSeed Tech Corp. USB IR Combo Device: Found scroll wheel(s)
(II) TopSeed Tech Corp. USB IR Combo Device: Found keys
(II) TopSeed Tech Corp. USB IR Combo Device: Configuring as mouse
(II) TopSeed Tech Corp. USB IR Combo Device: Configuring as keyboard
(**) TopSeed Tech Corp. USB IR Combo Device: YAxisMapping: buttons 4 and 5
(**) TopSeed Tech Corp. USB IR Combo Device: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TopSeed Tech Corp. USB IR Combo
Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) TopSeed Tech Corp. USB IR Combo Device: (accel) keeping acceleration
scheme 1
(**) TopSeed Tech Corp. USB IR Combo Device: (accel) filter chain progression:
2.00
(**) TopSeed Tech Corp. USB IR Combo Device: (accel) filter stage 0: 20.00 ms
(**) TopSeed Tech Corp. USB IR Combo Device: (accel) set acceleration profile
0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard"
(type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(II) config/hal: Adding input device TopSeed Tech Corp. USB IR Combo Device
(**) TopSeed Tech Corp. USB IR Combo Device: always reports core events
(**) TopSeed Tech Corp. USB IR Combo Device: Device: "/dev/input/event3"
(II) TopSeed Tech Corp. USB IR Combo Device: Found keys
(II) TopSeed Tech Corp. USB IR Combo Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "TopSeed Tech Corp. USB IR Combo
Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(**) Option "xkb_options" "lv3:ralt_switch"
(EE) TopSeed Tech Corp. USB IR Combo Device: Read error: No such device
(II) config/hal: removing device TopSeed Tech Corp. USB IR Combo Device
(II) TopSeed Tech Corp. USB IR Combo Device: Close
(II) UnloadModule: "evdev"
(EE) TopSeed Tech Corp. USB IR Combo Device: Read error: No such device
(II) config/hal: removing device TopSeed Tech Corp. USB IR Combo Device
(II) TopSeed Tech Corp. USB IR Combo Device: Close
(II) UnloadModule: "evdev"
(II) intel(0): EDID for output VGA
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID for output HDMI-1
(II) intel(0): Manufacturer: ATT Model: 0 Serial#: 0
(II) intel(0): Year: 2006 Week: 48
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 104 vert.: 58
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595
(II) intel(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 640x480@60Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 27.0 MHz Image Size: 820 x 461 mm
(II) intel(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858
h_border: 0
(II) intel(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525
v_border: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 27.0 MHz Image Size: 531 x 398 mm
(II) intel(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864
h_border: 0
(II) intel(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625
v_border: 0
(II) intel(0): Monitor name: LCD HDTV
(II) intel(0): Ranges: V min: 59 V max: 61 Hz, H min: 15 H max: 46 kHz,
PixClock max 80 MHz
(II) intel(0): Number of EDID sections to follow: 1
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff000694000000000000
(II) intel(0): 3010010380683a780a0dc9a057479827
(II) intel(0): 12484c20000001010101010101010101
(II) intel(0): 0101010101018c0ad08a20e02d10103e
(II) intel(0): 960034cd310000188c0ad09020403120
(II) intel(0): 0c405500138e21000018000000fc004c
(II) intel(0): 434420484454560a20202020000000fd
(II) intel(0): 003b3d0f2e08000a202020202020012a
(II) intel(0): 02031b71478510031f11131423090707
(II) intel(0): 8301000066030c00100000011d801871
(II) intel(0): 1c1620582c250034cd3100009e023a80
(II) intel(0): 1871382d40582c450034cd3100001e01
(II) intel(0): 1d00bc52d01e20b828554034cd310000
(II) intel(0): 1e011d80d0721c1620102c258034cd31
(II) intel(0): 00009e023a80d072382d40102c458034
(II) intel(0): cd3100001e000000000000000000002b
(II) intel(0): EDID vendor "ATT", prod id 0
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495
525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586
625 -hsync -vsync (31.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID vendor "ATT", prod id 0
(II) intel(0): Printing probed modes for output HDMI-1
(II) intel(0): Modeline "1920x1080"x63.7 148.50 1920 1932 1996 2064 1080
1085 1090 1129 (71.9 kHz)
(II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495
525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586
625 -hsync -vsync (31.2 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID for output VGA
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID for output HDMI-1
(II) intel(0): Manufacturer: ATT Model: 0 Serial#: 0
(II) intel(0): Year: 2006 Week: 48
(II) intel(0): EDID Version: 1.3
(II) intel(0): Digital Display Input
(II) intel(0): Max Image Size [cm]: horiz.: 104 vert.: 58
(II) intel(0): Gamma: 2.20
(II) intel(0): No DPMS capabilities specified
(II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.625 redY: 0.340 greenX: 0.280 greenY: 0.595
(II) intel(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 640x480@60Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 27.0 MHz Image Size: 820 x 461 mm
(II) intel(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858
h_border: 0
(II) intel(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525
v_border: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 27.0 MHz Image Size: 531 x 398 mm
(II) intel(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864
h_border: 0
(II) intel(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625
v_border: 0
(II) intel(0): Monitor name: LCD HDTV
(II) intel(0): Ranges: V min: 59 V max: 61 Hz, H min: 15 H max: 46 kHz,
PixClock max 80 MHz
(II) intel(0): Number of EDID sections to follow: 1
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff000694000000000000
(II) intel(0): 3010010380683a780a0dc9a057479827
(II) intel(0): 12484c20000001010101010101010101
(II) intel(0): 0101010101018c0ad08a20e02d10103e
(II) intel(0): 960034cd310000188c0ad09020403120
(II) intel(0): 0c405500138e21000018000000fc004c
(II) intel(0): 434420484454560a20202020000000fd
(II) intel(0): 003b3d0f2e08000a202020202020012a
(II) intel(0): 02031b71478510031f11131423090707
(II) intel(0): 8301000066030c00100000011d801871
(II) intel(0): 1c1620582c250034cd3100009e023a80
(II) intel(0): 1871382d40582c450034cd3100001e01
(II) intel(0): 1d00bc52d01e20b828554034cd310000
(II) intel(0): 1e011d80d0721c1620102c258034cd31
(II) intel(0): 00009e023a80d072382d40102c458034
(II) intel(0): cd3100001e000000000000000000002b
(II) intel(0): EDID vendor "ATT", prod id 0
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495
525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586
625 -hsync -vsync (31.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(II) intel(0): EDID vendor "ATT", prod id 0
(II) intel(0): Printing probed modes for output HDMI-1
(II) intel(0): Modeline "1920x1080"x63.7 148.50 1920 1932 1996 2064 1080
1085 1090 1129 (71.9 kHz)
(II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495
525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586
625 -hsync -vsync (31.2 kHz)
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.28.9 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.9-7 GNU C Library: Shared libraries
ii libdrm-intel1 2.4.5-2 Userspace interface to
intel-speci
ii libdrm2 2.4.5-2 Userspace interface to kernel DRM
ii libpciaccess0 0.10.5-3 Generic PCI access library for X
ii libxext6 2:1.0.4-1 X11 miscellaneous extension
librar
ii libxv1 2:1.0.4-1 X11 Video extension library
ii libxvmc1 1:1.0.4-2 X11 Video extension library
ii xserver-xorg-core 2:1.6.0-1 Xorg X server - core server
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- no debconf information
--- End Message ---