Bug#469706: video-intel: New intel driver no longer usable
Package: xserver-xorg-video-intel
Version: 2:2.6.1-1
Followup-For: Bug #469706
Hello,
After upgrading the X server I did a reconfigure to get rid of any
possible cruft in xorg.conf
After a few days the X server locked up. Symptoms:
- no keyboard input
- movable mouse cursor
- no screen updates
- X server can be killed only by signal 9
- when X server exits the screen goes to sleep mode (may be caused by
gdm starting another X server)
- the system would not suspend or power off, hard reset required
Switching accel to XAA completely locks up the box on X start, no remote
access.
-- Package-specific info:
Contents of /var/lib/x11/X.roster:
xserver-xorg
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 2008-01-14 21:54 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1872144 2009-01-31 20:20 /usr/bin/Xorg
Contents of /var/lib/x11/xorg.conf.roster:
xserver-xorg
VGA-compatible devices on PCI bus:
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
/etc/X11/xorg.conf unchanged from checksum in /var/lib/x11/xorg.conf.md5sum.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 1077 2009-02-21 15:14 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 6294 2009-02-13 19:26 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 22610 2009-02-21 15:15 /var/log/Xorg.0.log
Contents of Xorg X server log file of the locked up server
/var/log/Xorg.0.log:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.5.99.902 (1.6.0 RC 2)
Release Date: 2009-1-30
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.28 x86_64 Debian
Current Operating System: Linux heretic 2.6.28.3 #1 SMP PREEMPT Fri Feb 6 07:15:20 CET 2009 x86_64
Build Date: 31 January 2009 07:16:39PM
xorg-server 2:1.5.99.902-1 (jcristau@debian.org)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 13 19:47:51 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(==) No device specified for screen "Default Screen".
Using the first device section listed.
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0xce0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0xcfd00000/524288, 0xd0000000/268435456, 0xcfd80000/262144, I/O @ 0x00008800/8
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched intel from file name intel.ids
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.99.901, module version = 2.6.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945G
(--) intel(0): Chipset: "945G"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xCFD00000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Output VGA connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1280x1024
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (340, 280) mm
(**) intel(0): DPI set to (95, 116)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.99.902, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 746752 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 2987004 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(EE) intel(0): Failed to set tiling on front buffer: rejected by kernel
(EE) intel(0): Failed to set tiling on back buffer: rejected by kernel
(EE) intel(0): Failed to set tiling on depth buffer: rejected by kernel
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xcfd00000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0c1f5000 (pgoffset 49653)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0dff5000 (pgoffset 57333)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0c1f4fff: DRI memory manager (190680 kB)
(II) intel(0): 0x0c1f5000-0x0dff4fff: exa offscreen (30720 kB)
(II) intel(0): 0x0dff5000-0x0fff4fff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x007df000-0x011defff: depth buffer (10240 kB)
(II) intel(0): 0x017df000-0x021defff: back buffer (10240 kB)
(II) intel(0): 0x02800000-0x031fffff: front buffer (10240 kB)
(II) intel(0): 0x027df000-0x027e6fff: logical 3D context (32 kB)
(II) intel(0): 0x0c1f5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): [drm] mapped front buffer at 0xd2800000, handle = 0xd2800000
(II) intel(0): [drm] mapped back buffer at 0xd17df000, handle = 0xd17df000
(II) intel(0): [drm] mapped depth buffer at 0xd07df000, handle = 0xd07df000
(II) intel(0): [drm] mapped classic textures at 0xddff5000, handle = 0xddff5000
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 271
(II) config/hal: Adding input device Logitech USB Trackball
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.99.901, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Logitech USB Trackball: always reports core events
(**) Logitech USB Trackball: Device: "/dev/input/event7"
(II) Logitech USB Trackball: Found 5 mouse buttons
(II) Logitech USB Trackball: Found x and y relative axes
(II) Logitech USB Trackball: Configuring as mouse
(**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE)
(**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
(**) Logitech USB Trackball: (accel) filter chain progression: 2.00
(**) Logitech USB Trackball: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Trackball: (accel) set acceleration profile 0
(II) config/hal: Adding input device Wacom Bamboo
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.99.901, module version = 0.99.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 0.99.3
(**) Option "Device" "/dev/input/event4"
(--) Wacom Bamboo: no supported touchpad found
(**) Wacom Bamboo: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: TOUCHPAD)
(**) Wacom Bamboo: (accel) keeping acceleration scheme 1
(**) Wacom Bamboo: (accel) filter chain progression: 2.00
(**) Wacom Bamboo: (accel) filter stage 0: 20.00 ms
(**) Wacom Bamboo: (accel) set acceleration profile 0
(--) Wacom Bamboo: no supported touchpad found
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event3"
(II) Tangtop Generic USBPS2: Found 4 mouse buttons
(II) Tangtop Generic USBPS2: Found x and y relative axes
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as mouse
(II) Tangtop Generic USBPS2: Configuring as keyboard
(**) Tangtop Generic USBPS2: YAxisMapping: buttons 4 and 5
(**) Tangtop Generic USBPS2: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(**) Tangtop Generic USBPS2: (accel) keeping acceleration scheme 1
(**) Tangtop Generic USBPS2: (accel) filter chain progression: 2.00
(**) Tangtop Generic USBPS2: (accel) filter stage 0: 20.00 ms
(**) Tangtop Generic USBPS2: (accel) set acceleration profile 0
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event2"
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as keyboard
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
exaCopyDirty: Pending damage region empty!
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
(EE) Error loading keymap /var/lib/xkb/server-0.xkm
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync (75.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ENC", prod id 6025
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) config/hal: removing device Logitech USB Trackball
(II) Logitech USB Trackball: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0c1f5000 (pgoffset 49653)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0dff5000 (pgoffset 57333)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0c1f4fff: DRI memory manager (190680 kB)
(II) intel(0): 0x0c1f5000-0x0dff4fff: exa offscreen (30720 kB)
(II) intel(0): 0x0dff5000-0x0fff4fff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x007df000-0x011defff: depth buffer (10240 kB)
(II) intel(0): 0x017df000-0x021defff: back buffer (10240 kB)
(II) intel(0): 0x02800000-0x031fffff: front buffer (10240 kB)
(II) intel(0): 0x027df000-0x027e6fff: logical 3D context (32 kB)
(II) intel(0): 0x0c1f5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): [drm] mapped front buffer at 0xd2800000, handle = 0x2fff9000
(--) Wacom Bamboo: no supported touchpad found
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "synaptics"
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event2"
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as keyboard
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(II) config/hal: Adding input device Wacom Bamboo
(II) Synaptics touchpad driver version 0.99.3
(**) Option "Device" "/dev/input/event4"
(--) Wacom Bamboo: no supported touchpad found
(**) Wacom Bamboo: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: TOUCHPAD)
(**) Wacom Bamboo: (accel) keeping acceleration scheme 1
(**) Wacom Bamboo: (accel) filter chain progression: 2.00
(**) Wacom Bamboo: (accel) filter stage 0: 20.00 ms
(**) Wacom Bamboo: (accel) set acceleration profile 0
(--) Wacom Bamboo: no supported touchpad found
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event3"
(II) Tangtop Generic USBPS2: Found 4 mouse buttons
(II) Tangtop Generic USBPS2: Found x and y relative axes
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as mouse
(II) Tangtop Generic USBPS2: Configuring as keyboard
(**) Tangtop Generic USBPS2: YAxisMapping: buttons 4 and 5
(**) Tangtop Generic USBPS2: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(**) Tangtop Generic USBPS2: (accel) keeping acceleration scheme 1
(**) Tangtop Generic USBPS2: (accel) filter chain progression: 2.00
(**) Tangtop Generic USBPS2: (accel) filter stage 0: 20.00 ms
(**) Tangtop Generic USBPS2: (accel) set acceleration profile 0
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) config/hal: Adding input device Logitech USB Trackball
(**) Logitech USB Trackball: always reports core events
(**) Logitech USB Trackball: Device: "/dev/input/event7"
(II) Logitech USB Trackball: Found 5 mouse buttons
(II) Logitech USB Trackball: Found x and y relative axes
(II) Logitech USB Trackball: Configuring as mouse
(**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE)
(**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
(**) Logitech USB Trackball: (accel) filter chain progression: 2.00
(**) Logitech USB Trackball: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Trackball: (accel) set acceleration profile 0
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0c1f5000 (pgoffset 49653)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0dff5000 (pgoffset 57333)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0c1f4fff: DRI memory manager (190680 kB)
(II) intel(0): 0x0c1f5000-0x0dff4fff: exa offscreen (30720 kB)
(II) intel(0): 0x0dff5000-0x0fff4fff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x007df000-0x011defff: depth buffer (10240 kB)
(II) intel(0): 0x017df000-0x021defff: back buffer (10240 kB)
(II) intel(0): 0x02800000-0x031fffff: front buffer (10240 kB)
(II) intel(0): 0x027df000-0x027e6fff: logical 3D context (32 kB)
(II) intel(0): 0x0c1f5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(EE) xf86OpenSerial: Cannot open device /dev/input/event4
No such file or directory.
(WW) Wacom Bamboo: cannot open input device
[dix] couldn't enable device 3
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "synaptics"
(II) config/hal: removing device Logitech USB Trackball
(II) Logitech USB Trackball: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event2"
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as keyboard
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event3"
(II) Tangtop Generic USBPS2: Found 4 mouse buttons
(II) Tangtop Generic USBPS2: Found x and y relative axes
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as mouse
(II) Tangtop Generic USBPS2: Configuring as keyboard
(**) Tangtop Generic USBPS2: YAxisMapping: buttons 4 and 5
(**) Tangtop Generic USBPS2: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(**) Tangtop Generic USBPS2: (accel) keeping acceleration scheme 1
(**) Tangtop Generic USBPS2: (accel) filter chain progression: 2.00
(**) Tangtop Generic USBPS2: (accel) filter stage 0: 20.00 ms
(**) Tangtop Generic USBPS2: (accel) set acceleration profile 0
(II) config/hal: Adding input device Wacom Bamboo
(II) Synaptics touchpad driver version 0.99.3
(**) Option "Device" "/dev/input/event4"
(--) Wacom Bamboo: no supported touchpad found
(**) Wacom Bamboo: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: TOUCHPAD)
(**) Wacom Bamboo: (accel) keeping acceleration scheme 1
(**) Wacom Bamboo: (accel) filter chain progression: 2.00
(**) Wacom Bamboo: (accel) filter stage 0: 20.00 ms
(**) Wacom Bamboo: (accel) set acceleration profile 0
(--) Wacom Bamboo: no supported touchpad found
(II) config/hal: Adding input device Logitech USB Trackball
(**) Logitech USB Trackball: always reports core events
(**) Logitech USB Trackball: Device: "/dev/input/event7"
(II) Logitech USB Trackball: Found 5 mouse buttons
(II) Logitech USB Trackball: Found x and y relative axes
(II) Logitech USB Trackball: Configuring as mouse
(**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE)
(**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
(**) Logitech USB Trackball: (accel) filter chain progression: 2.00
(**) Logitech USB Trackball: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Trackball: (accel) set acceleration profile 0
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0c1f5000 (pgoffset 49653)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0dff5000 (pgoffset 57333)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0c1f4fff: DRI memory manager (190680 kB)
(II) intel(0): 0x0c1f5000-0x0dff4fff: exa offscreen (30720 kB)
(II) intel(0): 0x0dff5000-0x0fff4fff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x007df000-0x011defff: depth buffer (10240 kB)
(II) intel(0): 0x017df000-0x021defff: back buffer (10240 kB)
(II) intel(0): 0x02800000-0x031fffff: front buffer (10240 kB)
(II) intel(0): 0x027df000-0x027e6fff: logical 3D context (32 kB)
(II) intel(0): 0x0c1f5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(EE) xf86OpenSerial: Cannot open device /dev/input/event4
No such file or directory.
(WW) Wacom Bamboo: cannot open input device
[dix] couldn't enable device 4
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Logitech USB Trackball
(II) Logitech USB Trackball: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "synaptics"
(II) config/hal: Adding input device Logitech USB Trackball
(**) Logitech USB Trackball: always reports core events
(**) Logitech USB Trackball: Device: "/dev/input/event7"
(II) Logitech USB Trackball: Found 5 mouse buttons
(II) Logitech USB Trackball: Found x and y relative axes
(II) Logitech USB Trackball: Configuring as mouse
(**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE)
(**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
(**) Logitech USB Trackball: (accel) filter chain progression: 2.00
(**) Logitech USB Trackball: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Trackball: (accel) set acceleration profile 0
(II) config/hal: Adding input device Wacom Bamboo
(II) Synaptics touchpad driver version 0.99.3
(**) Option "Device" "/dev/input/event4"
(--) Wacom Bamboo: no supported touchpad found
(**) Wacom Bamboo: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: TOUCHPAD)
(**) Wacom Bamboo: (accel) keeping acceleration scheme 1
(**) Wacom Bamboo: (accel) filter chain progression: 2.00
(**) Wacom Bamboo: (accel) filter stage 0: 20.00 ms
(**) Wacom Bamboo: (accel) set acceleration profile 0
(--) Wacom Bamboo: no supported touchpad found
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event2"
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as keyboard
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event3"
(II) Tangtop Generic USBPS2: Found 4 mouse buttons
(II) Tangtop Generic USBPS2: Found x and y relative axes
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as mouse
(II) Tangtop Generic USBPS2: Configuring as keyboard
(**) Tangtop Generic USBPS2: YAxisMapping: buttons 4 and 5
(**) Tangtop Generic USBPS2: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(**) Tangtop Generic USBPS2: (accel) keeping acceleration scheme 1
(**) Tangtop Generic USBPS2: (accel) filter chain progression: 2.00
(**) Tangtop Generic USBPS2: (accel) filter stage 0: 20.00 ms
(**) Tangtop Generic USBPS2: (accel) set acceleration profile 0
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0c1f5000 (pgoffset 49653)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0dff5000 (pgoffset 57333)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0c1f4fff: DRI memory manager (190680 kB)
(II) intel(0): 0x0c1f5000-0x0dff4fff: exa offscreen (30720 kB)
(II) intel(0): 0x0dff5000-0x0fff4fff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x007df000-0x011defff: depth buffer (10240 kB)
(II) intel(0): 0x017df000-0x021defff: back buffer (10240 kB)
(II) intel(0): 0x02800000-0x031fffff: front buffer (10240 kB)
(II) intel(0): 0x027df000-0x027e6fff: logical 3D context (32 kB)
(II) intel(0): 0x0c1f5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(EE) xf86OpenSerial: Cannot open device /dev/input/event4
No such file or directory.
(WW) Wacom Bamboo: cannot open input device
[dix] couldn't enable device 3
(II) config/hal: removing device Logitech USB Trackball
(II) Logitech USB Trackball: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "synaptics"
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event2"
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as keyboard
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event3"
(II) Tangtop Generic USBPS2: Found 4 mouse buttons
(II) Tangtop Generic USBPS2: Found x and y relative axes
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as mouse
(II) Tangtop Generic USBPS2: Configuring as keyboard
(**) Tangtop Generic USBPS2: YAxisMapping: buttons 4 and 5
(**) Tangtop Generic USBPS2: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(**) Tangtop Generic USBPS2: (accel) keeping acceleration scheme 1
(**) Tangtop Generic USBPS2: (accel) filter chain progression: 2.00
(**) Tangtop Generic USBPS2: (accel) filter stage 0: 20.00 ms
(**) Tangtop Generic USBPS2: (accel) set acceleration profile 0
(II) config/hal: Adding input device Wacom Bamboo
(II) Synaptics touchpad driver version 0.99.3
(**) Option "Device" "/dev/input/event4"
(--) Wacom Bamboo: no supported touchpad found
(**) Wacom Bamboo: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: TOUCHPAD)
(**) Wacom Bamboo: (accel) keeping acceleration scheme 1
(**) Wacom Bamboo: (accel) filter chain progression: 2.00
(**) Wacom Bamboo: (accel) filter stage 0: 20.00 ms
(**) Wacom Bamboo: (accel) set acceleration profile 0
(--) Wacom Bamboo: no supported touchpad found
(II) config/hal: Adding input device Logitech USB Trackball
(**) Logitech USB Trackball: always reports core events
(**) Logitech USB Trackball: Device: "/dev/input/event7"
(II) Logitech USB Trackball: Found 5 mouse buttons
(II) Logitech USB Trackball: Found x and y relative axes
(II) Logitech USB Trackball: Configuring as mouse
(**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE)
(**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
(**) Logitech USB Trackball: (accel) filter chain progression: 2.00
(**) Logitech USB Trackball: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Trackball: (accel) set acceleration profile 0
(EE) Logitech USB Trackball: Read error: No such device
(II) config/hal: removing device Logitech USB Trackball
(II) Logitech USB Trackball: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "synaptics"
(II) config/hal: Adding input device Logitech USB Trackball
(**) Logitech USB Trackball: always reports core events
(**) Logitech USB Trackball: Device: "/dev/input/event4"
(II) Logitech USB Trackball: Found 5 mouse buttons
(II) Logitech USB Trackball: Found x and y relative axes
(II) Logitech USB Trackball: Configuring as mouse
(**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE)
(**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
(**) Logitech USB Trackball: (accel) filter chain progression: 2.00
(**) Logitech USB Trackball: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Trackball: (accel) set acceleration profile 0
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Logitech USB Trackball
(II) Logitech USB Trackball: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0c1f5000 (pgoffset 49653)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0dff5000 (pgoffset 57333)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0c1f4fff: DRI memory manager (190680 kB)
(II) intel(0): 0x0c1f5000-0x0dff4fff: exa offscreen (30720 kB)
(II) intel(0): 0x0dff5000-0x0fff4fff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x007df000-0x011defff: depth buffer (10240 kB)
(II) intel(0): 0x017df000-0x021defff: back buffer (10240 kB)
(II) intel(0): 0x02800000-0x031fffff: front buffer (10240 kB)
(II) intel(0): 0x027df000-0x027e6fff: logical 3D context (32 kB)
(II) intel(0): 0x0c1f5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) config/hal: Adding input device Logitech USB Trackball
(**) Logitech USB Trackball: always reports core events
(**) Logitech USB Trackball: Device: "/dev/input/event4"
(II) Logitech USB Trackball: Found 5 mouse buttons
(II) Logitech USB Trackball: Found x and y relative axes
(II) Logitech USB Trackball: Configuring as mouse
(**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE)
(**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
(**) Logitech USB Trackball: (accel) filter chain progression: 2.00
(**) Logitech USB Trackball: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Trackball: (accel) set acceleration profile 0
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event2"
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as keyboard
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event3"
(II) Tangtop Generic USBPS2: Found 4 mouse buttons
(II) Tangtop Generic USBPS2: Found x and y relative axes
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as mouse
(II) Tangtop Generic USBPS2: Configuring as keyboard
(**) Tangtop Generic USBPS2: YAxisMapping: buttons 4 and 5
(**) Tangtop Generic USBPS2: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(**) Tangtop Generic USBPS2: (accel) keeping acceleration scheme 1
(**) Tangtop Generic USBPS2: (accel) filter chain progression: 2.00
(**) Tangtop Generic USBPS2: (accel) filter stage 0: 20.00 ms
(**) Tangtop Generic USBPS2: (accel) set acceleration profile 0
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0c1f5000 (pgoffset 49653)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0dff5000 (pgoffset 57333)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0c1f4fff: DRI memory manager (190680 kB)
(II) intel(0): 0x0c1f5000-0x0dff4fff: exa offscreen (30720 kB)
(II) intel(0): 0x0dff5000-0x0fff4fff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x007df000-0x011defff: depth buffer (10240 kB)
(II) intel(0): 0x017df000-0x021defff: back buffer (10240 kB)
(II) intel(0): 0x02800000-0x031fffff: front buffer (10240 kB)
(II) intel(0): 0x027df000-0x027e6fff: logical 3D context (32 kB)
(II) intel(0): 0x0c1f5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Logitech USB Trackball
(II) Logitech USB Trackball: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event2"
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as keyboard
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(II) config/hal: Adding input device Logitech USB Trackball
(**) Logitech USB Trackball: always reports core events
(**) Logitech USB Trackball: Device: "/dev/input/event4"
(II) Logitech USB Trackball: Found 5 mouse buttons
(II) Logitech USB Trackball: Found x and y relative axes
(II) Logitech USB Trackball: Configuring as mouse
(**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE)
(**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
(**) Logitech USB Trackball: (accel) filter chain progression: 2.00
(**) Logitech USB Trackball: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Trackball: (accel) set acceleration profile 0
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event3"
(II) Tangtop Generic USBPS2: Found 4 mouse buttons
(II) Tangtop Generic USBPS2: Found x and y relative axes
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as mouse
(II) Tangtop Generic USBPS2: Configuring as keyboard
(**) Tangtop Generic USBPS2: YAxisMapping: buttons 4 and 5
(**) Tangtop Generic USBPS2: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(**) Tangtop Generic USBPS2: (accel) keeping acceleration scheme 1
(**) Tangtop Generic USBPS2: (accel) filter chain progression: 2.00
(**) Tangtop Generic USBPS2: (accel) filter stage 0: 20.00 ms
(**) Tangtop Generic USBPS2: (accel) set acceleration profile 0
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0c1f5000 (pgoffset 49653)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0dff5000 (pgoffset 57333)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0c1f4fff: DRI memory manager (190680 kB)
(II) intel(0): 0x0c1f5000-0x0dff4fff: exa offscreen (30720 kB)
(II) intel(0): 0x0dff5000-0x0fff4fff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x007df000-0x011defff: depth buffer (10240 kB)
(II) intel(0): 0x017df000-0x021defff: back buffer (10240 kB)
(II) intel(0): 0x02800000-0x031fffff: front buffer (10240 kB)
(II) intel(0): 0x027df000-0x027e6fff: logical 3D context (32 kB)
(II) intel(0): 0x0c1f5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Logitech USB Trackball
(II) Logitech USB Trackball: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event2"
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as keyboard
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event3"
(II) Tangtop Generic USBPS2: Found 4 mouse buttons
(II) Tangtop Generic USBPS2: Found x and y relative axes
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as mouse
(II) Tangtop Generic USBPS2: Configuring as keyboard
(**) Tangtop Generic USBPS2: YAxisMapping: buttons 4 and 5
(**) Tangtop Generic USBPS2: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(**) Tangtop Generic USBPS2: (accel) keeping acceleration scheme 1
(**) Tangtop Generic USBPS2: (accel) filter chain progression: 2.00
(**) Tangtop Generic USBPS2: (accel) filter stage 0: 20.00 ms
(**) Tangtop Generic USBPS2: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB Trackball
(**) Logitech USB Trackball: always reports core events
(**) Logitech USB Trackball: Device: "/dev/input/event4"
(II) Logitech USB Trackball: Found 5 mouse buttons
(II) Logitech USB Trackball: Found x and y relative axes
(II) Logitech USB Trackball: Configuring as mouse
(**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE)
(**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
(**) Logitech USB Trackball: (accel) filter chain progression: 2.00
(**) Logitech USB Trackball: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Trackball: (accel) set acceleration profile 0
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0c1f5000 (pgoffset 49653)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0dff5000 (pgoffset 57333)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0c1f4fff: DRI memory manager (190680 kB)
(II) intel(0): 0x0c1f5000-0x0dff4fff: exa offscreen (30720 kB)
(II) intel(0): 0x0dff5000-0x0fff4fff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x007df000-0x011defff: depth buffer (10240 kB)
(II) intel(0): 0x017df000-0x021defff: back buffer (10240 kB)
(II) intel(0): 0x02800000-0x031fffff: front buffer (10240 kB)
(II) intel(0): 0x027df000-0x027e6fff: logical 3D context (32 kB)
(II) intel(0): 0x0c1f5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Logitech USB Trackball
(II) Logitech USB Trackball: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device Logitech USB Trackball
(**) Logitech USB Trackball: always reports core events
(**) Logitech USB Trackball: Device: "/dev/input/event4"
(II) Logitech USB Trackball: Found 5 mouse buttons
(II) Logitech USB Trackball: Found x and y relative axes
(II) Logitech USB Trackball: Configuring as mouse
(**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE)
(**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
(**) Logitech USB Trackball: (accel) filter chain progression: 2.00
(**) Logitech USB Trackball: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Trackball: (accel) set acceleration profile 0
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event3"
(II) Tangtop Generic USBPS2: Found 4 mouse buttons
(II) Tangtop Generic USBPS2: Found x and y relative axes
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as mouse
(II) Tangtop Generic USBPS2: Configuring as keyboard
(**) Tangtop Generic USBPS2: YAxisMapping: buttons 4 and 5
(**) Tangtop Generic USBPS2: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(**) Tangtop Generic USBPS2: (accel) keeping acceleration scheme 1
(**) Tangtop Generic USBPS2: (accel) filter chain progression: 2.00
(**) Tangtop Generic USBPS2: (accel) filter stage 0: 20.00 ms
(**) Tangtop Generic USBPS2: (accel) set acceleration profile 0
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event2"
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as keyboard
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0c1f5000 (pgoffset 49653)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0dff5000 (pgoffset 57333)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0c1f4fff: DRI memory manager (190680 kB)
(II) intel(0): 0x0c1f5000-0x0dff4fff: exa offscreen (30720 kB)
(II) intel(0): 0x0dff5000-0x0fff4fff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x007df000-0x011defff: depth buffer (10240 kB)
(II) intel(0): 0x017df000-0x021defff: back buffer (10240 kB)
(II) intel(0): 0x02800000-0x031fffff: front buffer (10240 kB)
(II) intel(0): 0x027df000-0x027e6fff: logical 3D context (32 kB)
(II) intel(0): 0x0c1f5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Logitech USB Trackball
(II) Logitech USB Trackball: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event3"
(II) Tangtop Generic USBPS2: Found 4 mouse buttons
(II) Tangtop Generic USBPS2: Found x and y relative axes
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as mouse
(II) Tangtop Generic USBPS2: Configuring as keyboard
(**) Tangtop Generic USBPS2: YAxisMapping: buttons 4 and 5
(**) Tangtop Generic USBPS2: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(**) Tangtop Generic USBPS2: (accel) keeping acceleration scheme 1
(**) Tangtop Generic USBPS2: (accel) filter chain progression: 2.00
(**) Tangtop Generic USBPS2: (accel) filter stage 0: 20.00 ms
(**) Tangtop Generic USBPS2: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB Trackball
(**) Logitech USB Trackball: always reports core events
(**) Logitech USB Trackball: Device: "/dev/input/event4"
(II) Logitech USB Trackball: Found 5 mouse buttons
(II) Logitech USB Trackball: Found x and y relative axes
(II) Logitech USB Trackball: Configuring as mouse
(**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE)
(**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
(**) Logitech USB Trackball: (accel) filter chain progression: 2.00
(**) Logitech USB Trackball: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Trackball: (accel) set acceleration profile 0
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event2"
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as keyboard
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0c1f5000 (pgoffset 49653)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0dff5000 (pgoffset 57333)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0c1f4fff: DRI memory manager (190680 kB)
(II) intel(0): 0x0c1f5000-0x0dff4fff: exa offscreen (30720 kB)
(II) intel(0): 0x0dff5000-0x0fff4fff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x007df000-0x011defff: depth buffer (10240 kB)
(II) intel(0): 0x017df000-0x021defff: back buffer (10240 kB)
(II) intel(0): 0x02800000-0x031fffff: front buffer (10240 kB)
(II) intel(0): 0x027df000-0x027e6fff: logical 3D context (32 kB)
(II) intel(0): 0x0c1f5000: end of memory manager
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) config/hal: removing device Logitech USB Trackball
(II) Logitech USB Trackball: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Tangtop Generic USBPS2
(II) Tangtop Generic USBPS2: Close
(II) UnloadModule: "evdev"
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event3"
(II) Tangtop Generic USBPS2: Found 4 mouse buttons
(II) Tangtop Generic USBPS2: Found x and y relative axes
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as mouse
(II) Tangtop Generic USBPS2: Configuring as keyboard
(**) Tangtop Generic USBPS2: YAxisMapping: buttons 4 and 5
(**) Tangtop Generic USBPS2: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(**) Tangtop Generic USBPS2: (accel) keeping acceleration scheme 1
(**) Tangtop Generic USBPS2: (accel) filter chain progression: 2.00
(**) Tangtop Generic USBPS2: (accel) filter stage 0: 20.00 ms
(**) Tangtop Generic USBPS2: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB Trackball
(**) Logitech USB Trackball: always reports core events
(**) Logitech USB Trackball: Device: "/dev/input/event4"
(II) Logitech USB Trackball: Found 5 mouse buttons
(II) Logitech USB Trackball: Found x and y relative axes
(II) Logitech USB Trackball: Configuring as mouse
(**) Logitech USB Trackball: YAxisMapping: buttons 4 and 5
(**) Logitech USB Trackball: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Trackball" (type: MOUSE)
(**) Logitech USB Trackball: (accel) keeping acceleration scheme 1
(**) Logitech USB Trackball: (accel) filter chain progression: 2.00
(**) Logitech USB Trackball: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Trackball: (accel) set acceleration profile 0
(II) config/hal: Adding input device Tangtop Generic USBPS2
(**) Tangtop Generic USBPS2: always reports core events
(**) Tangtop Generic USBPS2: Device: "/dev/input/event2"
(II) Tangtop Generic USBPS2: Found keys
(II) Tangtop Generic USBPS2: Configuring as keyboard
(II) XINPUT: Adding extended input device "Tangtop Generic USBPS2" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Tangtop Generic USBPS2: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) Tangtop Generic USBPS2: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Tangtop Generic USBPS2: xkb_layout: "us"
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) config/hal: Adding input device Wacom Bamboo
(II) Synaptics touchpad driver version 0.99.3
(**) Option "Device" "/dev/input/event7"
(--) Wacom Bamboo: no supported touchpad found
(**) Wacom Bamboo: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: TOUCHPAD)
(**) Wacom Bamboo: (accel) keeping acceleration scheme 1
(**) Wacom Bamboo: (accel) filter chain progression: 2.00
(**) Wacom Bamboo: (accel) filter stage 0: 20.00 ms
(**) Wacom Bamboo: (accel) set acceleration profile 0
(--) Wacom Bamboo: no supported touchpad found
(II) config/hal: removing device Wacom Bamboo
(II) UnloadModule: "synaptics"
(II) config/hal: Adding input device Wacom Bamboo
(II) Synaptics touchpad driver version 0.99.3
(**) Option "Device" "/dev/input/event7"
(--) Wacom Bamboo: no supported touchpad found
(**) Wacom Bamboo: always reports core events
(II) XINPUT: Adding extended input device "Wacom Bamboo" (type: TOUCHPAD)
(**) Wacom Bamboo: (accel) keeping acceleration scheme 1
(**) Wacom Bamboo: (accel) filter chain progression: 2.00
(**) Wacom Bamboo: (accel) filter stage 0: 20.00 ms
(**) Wacom Bamboo: (accel) set acceleration profile 0
(--) Wacom Bamboo: no supported touchpad found
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0c1f5000 (pgoffset 49653)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0dff5000 (pgoffset 57333)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00009fff: HW cursors (40 kB, 0x00000000bf800000 physical
)
(II) intel(0): 0x0000a000-0x0000afff: overlay registers (4 kB, 0x00000000bf80a000 physical
)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0c1f4fff: DRI memory manager (190680 kB)
(II) intel(0): 0x0c1f5000-0x0dff4fff: exa offscreen (30720 kB)
(II) intel(0): 0x0dff5000-0x0fff4fff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x007df000-0x011defff: depth buffer (10240 kB)
(II) intel(0): 0x017df000-0x021defff: back buffer (10240 kB)
(II) intel(0): 0x02800000-0x031fffff: front buffer (10240 kB)
(II) intel(0): 0x027df000-0x027e6fff: logical 3D context (32 kB)
(II) intel(0): 0x0c1f5000: end of memory manager
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(--) Wacom Bamboo: no supported touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Tangtop Generic USBPS2: Device reopened after 1 attempts.
(II) Logitech USB Trackball: Device reopened after 1 attempts.
(II) Tangtop Generic USBPS2: Device reopened after 1 attempts.
-- System Information:
Debian Release: 5.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.28.3 (SMP w/1 CPU core; PREEMPT)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages xserver-xorg-video-intel depends on:
ii libc6 2.7-18 GNU C Library: Shared libraries
ii libdrm-inte 2.4.4+git+20090205+8b88036-1 Userspace interface to Intel-speci
ii libdrm2 2.4.4+git+20090205+8b88036-1 Userspace interface to kernel rend
ii libpciacces 0.10.3-1 Generic PCI access library for X
ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar
ii libxv1 2:1.0.4-1 X11 Video extension library
ii libxvmc1 1:1.0.4-2 X11 Video extension library
ii xserver-xor 2:1.5.99.902-1 Xorg X server - core server
xserver-xorg-video-intel recommends no packages.
xserver-xorg-video-intel suggests no packages.
-- debconf-show failed
Reply to: