[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#468802: xorg crashes when openoffice dropdown menus are pulled



Package: xserver-xorg
Version: 1:7.3+10
Severity: normal

--- Please enter the report below this line. ---
I've a MacBook with an intel video card

 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
	Subsystem: Intel Corporation Unknown device 7270
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at 50380000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at 20e0 [size=8]
	Region 2: Memory at 40000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at 50400000 (32-bit, non-prefetchable) [size=256K]
	Capabilities: <access denied>
	Kernel modules: intelfb
 
and the following xorg.conf (not sure it matters, the bug is there even with no xorg.conf at all)

  Section "Files"
  	FontPath	"/usr/share/fonts/X11/misc"
  	FontPath	"/usr/X11R6/lib/X11/fonts/misc"
  	FontPath	"/usr/share/fonts/X11/cyrillic"
  	FontPath	"/usr/X11R6/lib/X11/fonts/cyrillic"
  	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
  	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
  	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
  	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
  	FontPath	"/usr/share/fonts/X11/Type1"
  	FontPath	"/usr/X11R6/lib/X11/fonts/Type1"
  	FontPath	"/usr/share/fonts/X11/100dpi"
  	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi"
  	FontPath	"/usr/share/fonts/X11/75dpi"
  	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi"
  	# path to defoma fonts
  	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
  EndSection
  
  Section "Module"
  	Load	"bitmap"
  	Load	"ddc"
  	Load	"dri"
  	Load	"extmod"
  	Load	"freetype"
  	Load	"glx"
  	Load	"int10"
  	Load	"v4l"
  	Load	"vbe"
  EndSection
  
  Section "InputDevice"
  	Identifier	"Generic Keyboard"
  	Driver		"kbd"
  	Option		"CoreKeyboard"
  	Option		"XkbRules"	"xorg"
  	Option		"XkbModel"	"macbook79"
  	Option		"XkbLayout"	"us"
  	Option 		"XkbOptions"	"compose:rwin,eurosign:e,apple:goodmap"
  EndSection
  
  Section "InputDevice"
  	Identifier	"Configured Mouse"
  	Driver		"mouse"
  	Option		"CorePointer"
  	Option		"Device"		"/dev/input/mice"
  	Option		"Protocol"		"ImPS/2"
  	Option		"Emulate3Buttons"	"true"
  EndSection
  
  Section "InputDevice"
  	Identifier	"Synaptics Touchpad"
  	Driver		"synaptics"
  	Option		"SendCoreEvents"	"true"
  	Option		"Device"		"/dev/input/mouse1"
  	Option		"Protocol"		"auto-dev"
  	# from http://gentoo-wiki.com/HARDWARE_Apple_MacBook#Touchpad_in_X11
  	Option "LeftEdge"	 "100" 
  	Option "RightEdge"	 "1120" 
  	Option "TopEdge" 	 "50" 
  	Option "BottomEdge"	 "310" 
  	Option "FingerLow"	 "25" 
  	Option "FingerHigh"	 "30" 
  	Option "MaxTapTime"	 "180" 
  	Option "MaxTapMove"	 "220" 
  	Option "MaxDoubleTapTime"	 "180" 
  	Option "VertScrollDelta"	 "20" 
  	Option "HorizScrollDelta"	 "50" 
  	Option "MinSpeed"	 "0.79" 
  	Option "MaxSpeed"	 "0.88" 
  	Option "AccelFactor"	 "0.0015" 
  	Option "SHMConfig"	 "on"
  	Option "TapButton2"	 "3" 
  	Option "TapButton3"	 "2"
  EndSection
  
  Section "Device"
  	Identifier	"VGA0"
  	Driver		"intel"
  	BusID		"PCI:0:2:0"
  	Option 		"DevicePresence" "on"
  EndSection
  
  Section "Monitor"
  	Identifier	"BUILTIN LCD"
  	Option		"DPMS"
  EndSection
  
  Section "Screen"
  	Identifier	"LCD"
  	Device		"VGA0"
  	Monitor		"BUILTIN LCD"
  	DefaultDepth	24
  	SubSection "Display"
  		Depth		24
  		Modes		"1280x800" "1024x768" "800x600" "640x480"
  	EndSubSection
  EndSection
  
  Section "ServerLayout"
  	Identifier	"Default Layout"
  	Screen		"LCD"
  	InputDevice	"Generic Keyboard"
  	InputDevice	"Configured Mouse"
  	InputDevice	"Synaptics Touchpad"
  EndSection
  
  Section "Extensions"
  	Option "Composite" "Enable"
  EndSection
  
  Section "DRI"
  	Mode	0666
  EndSection

Downgrading xserver-xorg to 7.2 (the one in testing) it works.
If you need more infos, logs etc... just ask

Cheers

--- System information. ---
Architecture: amd64
Kernel:       Linux 2.6.24-1-amd64

Debian Release: lenny/sid
  500 unstable        www.debian-multimedia.org 
  500 unstable        ftp.it.debian.org 

--- Package information. ---
Depends                       (Version) | Installed
=======================================-+-=============
debconf                       (>= 0.5)  | 1.5.19
 OR debconf-2.0                         | 
x11-xkb-utils                           | 7.3+1
xkb-data                                | 1.1~cvs.20080104.1-1
 OR xkb-data-legacy                     | 
xserver-xorg-core          (>= 2:1.4-3) | 2:1.4.1~git20080131-1
xserver-xorg-input-all                  | 1:7.3+10
 OR xserver-xorg-input-2                | 
xserver-xorg-video-all                  | 1:7.3+10
 OR xserver-xorg-video-2                | 


-- 
Enrico Tassi



Reply to: