Bug#506212: xserver-xorg: After upgrade, X starts but there is no keyboard, user stuck
Package: xserver-xorg
Version: 1:7.4~4
Severity: normal
After an upgrade, I restarted X and it came up but with no
keyboard at all.
After powering off and rebooting without X, I found this
in Xorg.0.log:
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
After some googling, I found that I could use
Option "AllowEmptyInput" "false" and then everything is fine again.
I don't complain - "experimental" can pull such stunts of course.
But this needs fixing before it gets to stable, where users
expect their old config to work, or new necessary options to
be added automatically.
The information I found suggests that this option might be needed
when the keyboard is specified in xorg.conf, rather than autodetected.
I think I always will need some keyboard information in
xorg.xonf, because I use a norwegian keyboard layout. This surely
cannot be autodetected, even though the keyboard device is
trivially detectable. It is the same for every other non-english user.
-- Package-specific info:
Contents of /var/lib/x11/X.roster:
xserver-xorg
/etc/X11/X target does not match checksum in /var/lib/x11/X.md5sum.
X server symlink status:
lrwxrwxrwx 1 root root 13 26 okt. 2007 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1797392 12 nov. 14:14 /usr/bin/Xorg
Contents of /var/lib/x11/xorg.conf.roster:
xserver-xorg
VGA-compatible devices on PCI bus:
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 135M (rev a1)
/etc/X11/xorg.conf does not match checksum in /var/lib/x11/xorg.conf.md5sum.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 5342 19 nov. 13:07 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (randy@juliet2) Sat May 12 15:12:41 PDT 2007
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
#God ide?
Section "ServerFlags"
#Allow ctrl+alt+Fn - in theory but doesn't actually work.
#vt switch fail when started from xdm, works when started from startx
# Option "DontVTSwitch" "off"
#Get the console switching back?
#strangely, this works for xd but is not needed for startx ???
#This option also kills autorepeat and is therefore unuseable
#Option "XkbDisable" "true"
#Attempt to fix the mysteriously lost keyboard
Option "AllowEmptyInput" "false"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
#Touchpad before other mouse, according to:
##http://gentoo-wiki.com/HARDWARE_Synaptics_Touchpad
#now also "CorePointer"
InputDevice "Synaptics Touchpad" "CorePointer"
InputDevice "Configured Mouse"
EndSection
#Section "Module"
#nonexistant Load "type1"
# Load "glx"
# Load "dbe"
# Load "extmod"
# Load "fbdevhw"
# Load "record"
# Load "freetype"
#Virker ikke?
#EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "no"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "Buttons" "10"
Option "ZaxisMapping" "4 5 6 7"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "Buttons" "10"
Option "ZaxisMapping" "4 5 6 7"
Option "ButtonMapping" "2 3 4"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
#alt. protocols: "event" "alps"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
Option "SHMConfig" "on"
Option "LeftEdge" "120"
Option "RightEdge" "950"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapTime" "0"
Option "TappingOff" "1"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "CornerCoasting" "1"
Option "CoastingSpeed" "0"
Option "MinSpeed" "0.5"
Option "MaxSpeed" "3"
#0.015
Option "AccelFactor" "0.08"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
Option "LeftRightScrolling" "1"
Option "CircularScrolling" "1"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
EndSection
Section "Monitor"
# 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
Identifier "Standard skjerm"
# Settings obsolete for nouveau, needed for vesa.
HorizSync 28.0 - 84.0
VertRefresh 43.0 - 60.0
ModeLine "1680x1050_60.00" 147.1 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync
Option "DPMS"
EndSection
Section "Device"
#nv has the cuyo problem and is generally slow.
#It also crash if I plug in an extra screen, or
#stop the xserver several times. :-(
#Nvidia sure is lousy.
Driver "nv"
# exa performs badly with nv
# Option "AccelMethod" "exa"
# Driver "vesa"
# Driver "nouveau"
Identifier "nVidia Quadro NVS 135M"
# Driver "nvidia"
Option "EXAOptimizeMigration" "1"
Option "RandRRotation" "on"
EndSection
Section "Screen"
#unsupported option by NVIDIA:
# For compiz:
# Option "AddARGBGLXVisuals" "true"
Identifier "Default Screen"
Device "nVidia Quadro NVS 135M"
Monitor "Standard skjerm"
DefaultDepth 24
#Andre alt: Clone, LeftOf, Above, Below
SubSection "Display"
Depth 24
#1680x1050 + 1280x1024 => 2960x1050
#1680x1050 + 1920x1200 => 3600x1200
#1680x1050 + 1200x1920 => 2880x2970
#begge deler (rotasjon) 3600x2970
#Needed for 2-screen nouveau/nv, but fails VESA
Virtual 3600 2970
# Modes "1680x1050_60.00"
Modes "1680x1680" "1680x1050" "1280x1024" "1024x768" "800x600" "640x480" "640x400"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 56532 19 nov. 2007 /var/log/Xorg.1680x1050x8.log
-rw-r--r-- 1 root root 53575 22 juni 18:26 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 27017 19 nov. 13:03 /var/log/Xorg.nokeyboardatall.log
-rw-r--r-- 1 root root 36344 19 nov. 13:09 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.17.7 x86_64 Debian
Current Operating System: Linux hh2 2.6.28-rc5-hh1 #14 SMP Tue Nov 18 10:08:16 CET 2008 x86_64
Build Date: 12 November 2008 12:59:43PM
xorg-server 2:1.5.3-1 (buildd@xenophanes)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 19 13:09:06 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Standard skjerm"
(**) | |-->Device "nVidia Quadro NVS 135M"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Synaptics Touchpad"
(**) |-->Input Device "Configured Mouse"
(**) Option "AllowEmptyInput" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x7b1ec0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(WW) xf86OpenConsole: setpgid failed: Operation not permitted
(WW) xf86OpenConsole: setsid failed: Operation not permitted
(--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 135M rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf2000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/131072
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
compiled for 1.5.0, module version = 2.1.12
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.99.905, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 0.15.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.99.905, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 6800,
GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT, GeForce 6200,
GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
(II) Primary Device is: PCI 01@00:00:0
(--) NV: Found NVIDIA Quadro NVS 135M at 01@00:00:0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Console is VGA mode 0x3
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(==) NV(0): Using hardware cursor
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): MMIO registers mapped at 0x7fc5a7292000
(--) NV(0): Total video RAM: 128.0 MB
(--) NV(0): BAR1 size: 256.0 MB
(--) NV(0): Mapped memory: 127.0 MB
(II) NV(0): Linear framebuffer mapped at 0x7fc59f392000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) NV(0): Connector map:
(--) NV(0): Bus 3 -> SOR0 (LVDS)
(--) NV(0): Bus 0 -> DAC1
(--) NV(0): Bus 1 -> SOR1
(--) NV(0): Load detection: 279
(II) NV(0): I2C bus "I2C0" initialized.
(II) NV(0): Output VGA1 using monitor section Standard skjerm
(II) NV(0): I2C bus "I2C1" initialized.
(II) NV(0): Output DVI1 has no monitor section
(II) NV(0): LVDS native size 1680x1050
(II) NV(0): Output LVDS has no monitor section
(II) NV(0): I2C bus "I2C3 (LVDS)" initialized.
(II) NV(0): Probing for EDID on I2C bus 0...
(II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: ACR Model: ad63 Serial#: 0
(II) NV(0): Year: 2006 Week: 23
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NV(0): Sync: Separate
(II) NV(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): First detailed timing not preferred mode in violation of standard!(II) NV(0): redX: 0.650 redY: 0.345 greenX: 0.287 greenY: 0.600
(II) NV(0): blueX: 0.140 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) NV(0): Serial No: 62306F124010
(II) NV(0): Monitor name: AL1916
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff00047263ad00000000
(II) NV(0): 1710010308261e78e89ae5a658499923
(II) NV(0): 115054bfef0001010101010101010101
(II) NV(0): 010101010101302a009851002a403070
(II) NV(0): 1300782d1100001e000000fd00384b1e
(II) NV(0): 530e000a202020202020000000ff0036
(II) NV(0): 32333036463132343031300a000000fc
(II) NV(0): 00414c313931360a202020202020001b
(--) NV(0): Trying load detection on VGA1 ... found one!
(II) NV(0): EDID vendor "ACR", prod id 44387
(II) NV(0): Using hsync ranges from config file
(II) NV(0): Using vrefresh ranges from config file
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) NV(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) NV(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) NV(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) NV(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) NV(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) NV(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) NV(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) NV(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) NV(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) NV(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) NV(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) NV(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) NV(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) NV(0): EDID vendor "ACR", prod id 44387
(II) NV(0): Probing for EDID on I2C bus 1...
(II) NV(0): I2C device "I2C1:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "I2C1:ddc2" removed.
(II) NV(0): ... none found
(II) NV(0): Probing for EDID on I2C bus 3...
(II) NV(0): I2C device "I2C3 (LVDS):ddc2" registered at address 0xA0.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: SEC Model: 3350 Serial#: 0
(II) NV(0): Year: 2007 Week: 0
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) NV(0): Gamma: 2.20
(II) NV(0): No DPMS capabilities specified
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) NV(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 132.0 MHz Image Size: 331 x 207 mm
(II) NV(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 2000 h_border: 0
(II) NV(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1100 v_border: 0
(WW) NV(0): Unknown vendor-specific block f
(II) NV(0): NK058154P3
(II) NV(0): 4AJi���
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff004ca3503300000000
(II) NV(0): 00110103802115780a87f594574f8c27
(II) NV(0): 27505400000001010101010101010101
(II) NV(0): 01010101010190339040611a32403020
(II) NV(0): 36004bcf100000190000000f00000000
(II) NV(0): 00000000003cd2026400000000fe004e
(II) NV(0): 4b3035380231353450330a20000000fe
(II) NV(0): 001134414a698fbfff02010a202000e9
(II) NV(0): EDID vendor "SEC", prod id 13136
(II) NV(0): Output VGA1 connected
(II) NV(0): Output DVI1 disconnected
(II) NV(0): Output LVDS connected
(II) NV(0): Using exact sizes for initial modes
(II) NV(0): Output VGA1 using initial mode 1680x1050_60.00
(II) NV(0): Output LVDS using initial mode 1680x1050
(--) NV(0): Virtual size is 3600x2970 (pitch 3840)
(**) NV(0): Driver mode "1680x1050": 132.0 MHz (scaled from 0.0 MHz), 66.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1680x1050"x60.0 132.00 1680 1728 1760 2000 1050 1053 1059 1100 -hsync -vsync (66.0 kHz)
(**) NV(0): Default mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) NV(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(**) NV(0): Default mode "1600x1024": 103.1 MHz (scaled from 0.0 MHz), 62.0 kHz, 60.2 Hz
(II) NV(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz)
(**) NV(0): Default mode "1400x1050": 122.0 MHz (scaled from 0.0 MHz), 64.9 kHz, 60.0 Hz
(II) NV(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
(**) NV(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(**) NV(0): Default mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
(II) NV(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(**) NV(0): Default mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(**) NV(0): Default mode "1360x768": 84.8 MHz (scaled from 0.0 MHz), 47.7 kHz, 59.8 Hz
(II) NV(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
(**) NV(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) NV(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
(**) NV(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(**) NV(0): Default mode "960x540": 69.2 MHz (scaled from 0.0 MHz), 66.6 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "960x540"x60.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz)
(**) NV(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(**) NV(0): Default mode "840x525": 73.1 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "840x525"x60.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz)
(**) NV(0): Default mode "840x525": 59.5 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz (D)
(II) NV(0): Modeline "840x525"x59.9 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz)
(**) NV(0): Default mode "800x512": 51.6 MHz (scaled from 0.0 MHz), 62.0 kHz, 60.2 Hz (D)
(II) NV(0): Modeline "800x512"x60.2 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz)
(**) NV(0): Default mode "700x525": 61.0 MHz (scaled from 0.0 MHz), 64.9 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz)
(**) NV(0): Default mode "640x512": 54.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz)
(**) NV(0): Default mode "720x450": 53.2 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz (D)
(II) NV(0): Modeline "720x450"x59.9 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz)
(**) NV(0): Default mode "640x480": 54.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz)
(**) NV(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
(II) NV(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(**) NV(0): Default mode "680x384": 42.4 MHz (scaled from 0.0 MHz), 47.7 kHz, 59.8 Hz (D)
(II) NV(0): Modeline "680x384"x59.8 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz)
(**) NV(0): Default mode "680x384": 36.0 MHz (scaled from 0.0 MHz), 47.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "680x384"x60.0 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz)
(**) NV(0): Default mode "576x432": 40.8 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.1 Hz (D)
(II) NV(0): Modeline "576x432"x60.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz)
(**) NV(0): Default mode "512x384": 32.5 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz (D)
(II) NV(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
(**) NV(0): Display dimensions: (380, 300) mm
(**) NV(0): DPI set to (240, 251)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.2.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(--) NV(0): 83.44 MB available for offscreen pixmaps
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Option "dpms"
(**) NV(0): DPMS enabled
(II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NV(0): Setting screen physical size to 331 x 207
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "no"
(**) Generic Keyboard: XkbLayout: "no"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) Synaptics touchpad driver version 0.15.0
(--) Synaptics Touchpad auto-dev sets device to /dev/input/event6
(II) Synaptics Touchpad: x-axis range 0 - 1023
(II) Synaptics Touchpad: y-axis range 0 - 767
(**) Option "Device" "/dev/input/event6"
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "120"
(**) Option "RightEdge" "950"
(**) Option "TopEdge" "120"
(**) Option "BottomEdge" "650"
(**) Option "FingerLow" "14"
(**) Option "FingerHigh" "15"
(**) Option "MaxTapTime" "0"
(**) Option "MaxTapMove" "110"
(**) Option "EmulateMidButtonTime" "75"
(**) Option "VertScrollDelta" "20"
(**) Option "HorizScrollDelta" "0"
(**) Option "CornerCoasting" "1"
(**) Option "EdgeMotionMinSpeed" "200"
(**) Option "EdgeMotionMaxSpeed" "200"
(**) Option "UpDownScrolling" "1"
(**) Option "LeftRightScrolling" "1"
(**) Option "CircularScrolling" "1"
(**) Option "CircScrollTrigger" "2"
(--) Synaptics Touchpad touchpad found
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) Synaptics Touchpad: always reports core events
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "SendCoreEvents" "true"
(**) Configured Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "10"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Configured Mouse: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Configured Mouse: Buttons: 14
(**) Configured Mouse: Sensitivity: 1
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) evaluating device (Synaptics Touchpad)
(II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE)
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(--) Synaptics Touchpad touchpad found
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(II) Synaptics touchpad driver version 0.15.0
(**) Option "Device" "/dev/input/event6"
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: MOUSE)
(WW) AlpsPS/2 ALPS GlidePoint can't grab event device, errno=16
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(II) NV(0): Probing for EDID on I2C bus 0...
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: ACR Model: ad63 Serial#: 0
(II) NV(0): Year: 2006 Week: 23
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NV(0): Sync: Separate
(II) NV(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): First detailed timing not preferred mode in violation of standard!(II) NV(0): redX: 0.650 redY: 0.345 greenX: 0.287 greenY: 0.600
(II) NV(0): blueX: 0.140 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) NV(0): Serial No: 62306F124010
(II) NV(0): Monitor name: AL1916
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff00047263ad00000000
(II) NV(0): 1710010308261e78e89ae5a658499923
(II) NV(0): 115054bfef0001010101010101010101
(II) NV(0): 010101010101302a009851002a403070
(II) NV(0): 1300782d1100001e000000fd00384b1e
(II) NV(0): 530e000a202020202020000000ff0036
(II) NV(0): 32333036463132343031300a000000fc
(II) NV(0): 00414c313931360a202020202020001b
(--) NV(0): Trying load detection on VGA1 ... found one!
(II) NV(0): EDID vendor "ACR", prod id 44387
(II) NV(0): Probing for EDID on I2C bus 1...
(II) NV(0): I2C device "I2C1:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "I2C1:ddc2" removed.
(II) NV(0): ... none found
(II) NV(0): Probing for EDID on I2C bus 3...
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: SEC Model: 3350 Serial#: 0
(II) NV(0): Year: 2007 Week: 0
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) NV(0): Gamma: 2.20
(II) NV(0): No DPMS capabilities specified
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) NV(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 132.0 MHz Image Size: 331 x 207 mm
(II) NV(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 2000 h_border: 0
(II) NV(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1100 v_border: 0
(WW) NV(0): Unknown vendor-specific block f
(II) NV(0): NK058154P3
(II) NV(0): 4AJi���
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff004ca3503300000000
(II) NV(0): 00110103802115780a87f594574f8c27
(II) NV(0): 27505400000001010101010101010101
(II) NV(0): 01010101010190339040611a32403020
(II) NV(0): 36004bcf100000190000000f00000000
(II) NV(0): 00000000003cd2026400000000fe004e
(II) NV(0): 4b3035380231353450330a20000000fe
(II) NV(0): 001134414a698fbfff02010a202000e9
(II) NV(0): EDID vendor "SEC", prod id 13136
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "1680x1050"x0.0 132.00 1680 1728 1760 2000 1050 1053 1059 1100 -hsync -vsync (66.0 kHz)
(II) NV(0): EDID vendor "SEC", prod id 13136
(II) NV(0): Probing for EDID on I2C bus 0...
(--) NV(0): DDC detected a CRT:
(II) NV(0): Manufacturer: ACR Model: ad63 Serial#: 0
(II) NV(0): Year: 2006 Week: 23
(II) NV(0): EDID Version: 1.3
(II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) NV(0): Sync: Separate
(II) NV(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): First detailed timing not preferred mode in violation of standard!(II) NV(0): redX: 0.650 redY: 0.345 greenX: 0.287 greenY: 0.600
(II) NV(0): blueX: 0.140 blueY: 0.068 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@56Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) NV(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) NV(0): Serial No: 62306F124010
(II) NV(0): Monitor name: AL1916
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff00047263ad00000000
(II) NV(0): 1710010308261e78e89ae5a658499923
(II) NV(0): 115054bfef0001010101010101010101
(II) NV(0): 010101010101302a009851002a403070
(II) NV(0): 1300782d1100001e000000fd00384b1e
(II) NV(0): 530e000a202020202020000000ff0036
(II) NV(0): 32333036463132343031300a000000fc
(II) NV(0): 00414c313931360a202020202020001b
(--) NV(0): Trying load detection on VGA1 ... found one!
(II) NV(0): EDID vendor "ACR", prod id 44387
(II) NV(0): Probing for EDID on I2C bus 1...
(II) NV(0): I2C device "I2C1:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "I2C1:ddc2" removed.
(II) NV(0): ... none found
(II) NV(0): Probing for EDID on I2C bus 3...
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: SEC Model: 3350 Serial#: 0
(II) NV(0): Year: 2007 Week: 0
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) NV(0): Gamma: 2.20
(II) NV(0): No DPMS capabilities specified
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
(II) NV(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 132.0 MHz Image Size: 331 x 207 mm
(II) NV(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 2000 h_border: 0
(II) NV(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1100 v_border: 0
(WW) NV(0): Unknown vendor-specific block f
(II) NV(0): NK058154P3
(II) NV(0): 4AJi���
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff004ca3503300000000
(II) NV(0): 00110103802115780a87f594574f8c27
(II) NV(0): 27505400000001010101010101010101
(II) NV(0): 01010101010190339040611a32403020
(II) NV(0): 36004bcf100000190000000f00000000
(II) NV(0): 00000000003cd2026400000000fe004e
(II) NV(0): 4b3035380231353450330a20000000fe
(II) NV(0): 001134414a698fbfff02010a202000e9
(II) NV(0): EDID vendor "SEC", prod id 13136
(II) NV(0): Printing DDC gathered Modelines:
(II) NV(0): Modeline "1680x1050"x0.0 132.00 1680 1728 1760 2000 1050 1053 1059 1100 -hsync -vsync (66.0 kHz)
(II) NV(0): EDID vendor "SEC", prod id 13136
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (900, 'testing'), (800, 'unstable'), (800, 'stable'), (700, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.28-rc5-hh1 (SMP w/2 CPU cores)
Locale: LANG=nb_NO.UTF-8, LC_CTYPE=nb_NO.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg depends on:
ii debconf [debconf-2. 1.5.24 Debian configuration management sy
ii libc6 2.7-15 GNU C Library: Shared libraries
ii x11-xkb-utils 7.4+1 X11 XKB utilities
ii xkb-data 1.3-2 X Keyboard Extension (XKB) configu
ii xserver-xorg-core 2:1.5.3-1 Xorg X server - core server
ii xserver-xorg-input- 1:1.3.1-2 X.Org X server -- keyboard input d
ii xserver-xorg-input- 1:1.3.0-2 X.Org X server -- mouse input driv
ii xserver-xorg-input- 0.15.0+git20080820-1 Synaptics TouchPad driver for X.Or
ii xserver-xorg-input- 0.8.1.6-1+ X.Org X server -- Wacom input driv
ii xserver-xorg-video- 1:2.1.12-1 X.Org X server -- NV display drive
Versions of packages xserver-xorg recommends:
ii libgl1-mesa-dri 7.2-1 A free implementation of the OpenG
ii udev 0.125-7 /dev/ and hotplug management daemo
xserver-xorg suggests no packages.
-- debconf-show failed
Reply to: