Bug#499121: PCI: (3:0:1) ATI Technologies Inc unknown chipset (0x5b75) rev 128, Mem @ 0xf8010000/16
Package: xserver-xorg-video-ati
Version: 1:6.9.0-1+lenny2
Severity: normal
Hello,
I'm running lenny on i386 and my Xorg.0.log tells me:
(--) PCI:*(3:0:0) ATI Technologies Inc RV370 5B65 [FireGL D1100 (PCIE)] rev 128, Mem @ 0xf0000000/27, 0xf8000000/16, I/O @ 0x9000/8
(--) PCI: (3:0:1) ATI Technologies Inc unknown chipset (0x5b75) rev 128, Mem @ 0xf8010000/16
I tested it with 1:6.9.0-1+lenny2, 1:6.9.0-1+lenny4 and the one in experimental
(rebuild it to get it installed) but always have this "unknown chipset".
The card has a cradle for the two DVI outputs which are runing as clones after
a lenny installation.
How to get the chipset known to x.org?
# lspci -n
...
03:00.0 0300: 1002:5b65 (rev 80)
03:00.1 0380: 1002:5b75 (rev 80)
...
# lspci -vv
...
03:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B65 [FireGL D1100 (PCIE)] (rev 80)
Subsystem: ATI Technologies Inc Device 0402
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f0000000 (64-bit, prefetchable) [size=128M]
Region 2: Memory at f8000000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at 9000 [size=256]
[virtual] Expansion ROM at f8020000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <128ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [100] Advanced Error Reporting <?>
Kernel modules: radeonfb
03:00.1 Display controller: ATI Technologies Inc Device 5b75 (rev 80)
Subsystem: ATI Technologies Inc Device 0403
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at f8010000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <128ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
...
Do you need more information?
Thank you.
-- System Information:
Debian Release: lenny/sid
APT prefers lenny
Architecture: i386
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Reply to: