Package: xserver-xorg-video-i810 Version: 1.7.2-4 Severity: normal Hi! This bug shows up when running current etch+.5 kernel 2.6.24. It also appeared earlier on a kernel from backports.org, before etch+.5 was released. I believe it was 2.6.25-6~bpo40+1 but I'll check to confirm if necessary. The bug does not happen on 2.6.18 from current etch. The backlight dimmer function keys are Fn+Home / Fn+End. (Fn is keycode 227, Fn+Home is keycode 212, Fn+End is keycode 101, according to xev.) They usually dim the backlight in 8 levels. That works well on kernel 2.6.18+6etch3. Also it does as expected in the framebuffer console under linux 2.6.24-6~etchnhalf.4. Just in the X window system (i810) running under linux 2.6.24, the following happens: When I change brightness in either direction by one step, that seems to happen O.K. for a fraction of a second, and then the backlight switches off completely. One more step in the same direction changes nothing. If I go a third step, again it takes a fraction of a second and light comes on again, three brightness levels away from the original state. Even if I have already reached maximum or minimum, one of the function keys should actually do nothing any more, still kills the backlight, until I press the do-nothing-key twice more. By pressing again and again, I can probably infinitely switch the backlickt off-off-on-off-off-on and so on. My conclusion is, the backlight switching is still working, but on top of that, there is some kind of extra function in those keys, killing the backlight and turning it back on in that 2-1 pattern. dmesg logs nothing in that moment. But /var/log/Xorg.0.log outputs the following every time one of those keys is pressed, see below. I was first unsure whether to assign this bug to xserver-xorg-video-i810 or to linux-image-2.6.24-etchnhalf.1-amd64, so I attached information about both packages. Thanks in advance for looking into this! Best regards Kevin ------------------ backlight dimmer key pressed (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s ------------------ backlight dimmer key pressed -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.24-etchnhalf.1-amd64 Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15) -- Kevin Price http://www.kevin-price.de/
-- Package-specific info: ** Version: Linux version 2.6.24-etchnhalf.1-amd64 (Debian 2.6.24-6~etchnhalf.4) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Jul 21 10:36:02 UTC 2008 ** Command line: root=/dev/sda6 ro vga=791 ** Tainted: P (1) ** Kernel log: agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input4 thinkpad_acpi: ThinkPad ACPI Extras v0.17 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7FETA7WW (2.25 ), EC 7FHT26WW-1.08 thinkpad_acpi: Lenovo ThinkPad Z61m thinkpad_acpi: radio switch found; radios are enabled ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input5 ACPI: Sleep Button (CM) [SLPB] ath_hal: module license 'Proprietary' taints kernel. AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133) thinkpad_acpi: standard ACPI backlight interface available, not loading native one... input: ThinkPad Extra Buttons as /class/input/input6 ACPI: Battery Slot [BAT0] (battery present) intel_rng: FWH not detected Yenta: CardBus bridge found at 0000:15:00.0 [17aa:2028] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to ISA Yenta TI: socket 0000:15:00.0, mfunc 0x01db1b22, devctl 0x64 input: PC Speaker as /class/input/input7 input: Video Bus as /class/input/input8 ACPI: AC Adapter [AC] (on-line) iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Yenta: ISA IRQ mask 0x0cf8, PCI irq 16 Socket status: 30000086 pcmcia: parent PCI bridge I/O window: 0x8000 - 0xbfff pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:03:00.0 to 64 input: Video Bus as /class/input/input9 MadWifi: ath_attach: Switching rfkill capability off. sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0) irda_init() NET: Registered protocol family 23 ath_pci: wifi0: Atheros 5418: mem=0xedf00000, irq=17 ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 23 ACPI: PCI Interrupt 0000:15:00.2[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:15:00.2 to 64 sdhci: SDHCI controller found at 0000:15:00.3 [104c:803c] (rev 0) ACPI: PCI Interrupt 0000:15:00.3[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:15:00.3 to 64 mmc0: SDHCI at 0xe4302800 irq 16 DMA Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input10 iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) pnp: the driver 'nsc-ircc' has been registered pnp: Res cnt 3 pnp: res cnt 3 pnp: Encode io pnp: Encode irq pnp: Encode dma nsc-ircc 00:0a: activated nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. nsc-ircc 00:0a: driver attached nsc-ircc, chip->init nsc-ircc, Found chip at base=0x164e nsc-ircc, driver loaded (Dag Brattli) IrDA: Registered device irda0 nsc-ircc, Found dongle: No dongle connected nsc_ircc_init_dongle_interface(), No dongle connected ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 17 hda_intel: probe_mask set to 0x1 for device 17aa:2010 PCI: Setting latency timer of device 0000:00:1b.0 to 64 Adding 975200k swap on /dev/sda5. Priority:-1 extents:1 across:975200k EXT3 FS on sda6, internal journal loop: module loaded device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com fuse init (API version 7.9) IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input11 pnp: the driver 'parport_pc' has been registered lp: driver loaded but no devices found ppdev: user-space parallel port driver input: /usr/sbin/thinkpad-keys as /class/input/input12 Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 [drm] Initialized i915 1.6.0 20060119 on minor 0 ** Loaded modules: Module Size Used by wlan_tkip 16640 2 i915 31360 2 drm 99112 3 i915 cpufreq_ondemand 13840 1 cpufreq_userspace 9860 0 cpufreq_powersave 6400 0 acpi_cpufreq 13968 2 freq_table 9728 2 cpufreq_ondemand,acpi_cpufreq rfcomm 46624 0 l2cap 29824 5 rfcomm bluetooth 66340 4 rfcomm,l2cap uinput 14464 1 ppdev 13960 0 parport_pc 34984 0 lp 17604 0 parport 45068 3 ppdev,parport_pc,lp nls_iso8859_15 10368 1 nls_cp437 11520 1 vfat 18304 1 fat 58672 1 vfat fuse 53936 3 dm_snapshot 22216 0 dm_mirror 27264 0 dm_mod 68344 2 dm_snapshot,dm_mirror sbp2 29196 0 loop 23044 0 joydev 17664 0 irtty_sir 13440 0 sir_dev 21768 1 irtty_sir snd_hda_intel 362408 2 snd_pcm_oss 46880 0 snd_mixer_oss 21632 1 snd_pcm_oss snd_pcm 89736 3 snd_hda_intel,snd_pcm_oss nsc_ircc 28624 0 wlan_scan_sta 19456 1 snd_timer 28936 2 snd_pcm pcmcia 46104 0 firmware_class 15360 1 pcmcia irda 198636 3 irtty_sir,sir_dev,nsc_ircc ath_rate_sample 18560 1 snd 66280 7 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer sdhci 23300 0 crc_ccitt 6784 1 irda iTCO_wdt 17744 0 tifm_7xx1 12800 0 soundcore 13344 1 snd ac 11528 0 video 25876 0 serio_raw 12036 0 i2c_i801 14236 0 tifm_core 16264 1 tifm_7xx1 ath_pci 249792 0 wlan 234272 5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci pcspkr 7936 0 mmc_core 59144 1 sdhci psmouse 46108 0 yenta_socket 31884 1 rsrc_nonstatic 16384 1 yenta_socket pcmcia_core 46756 3 pcmcia,yenta_socket,rsrc_nonstatic i2c_core 30080 1 i2c_i801 snd_page_alloc 15504 2 snd_hda_intel,snd_pcm ath_hal 282752 3 ath_rate_sample,ath_pci battery 20104 0 output 8832 1 video thinkpad_acpi 59792 0 button 14112 0 intel_agp 32544 1 nvram 13832 2 thinkpad_acpi evdev 17152 5 ext3 139536 1 jbd 56232 1 ext3 mbcache 14208 1 ext3 ide_cd 44960 0 cdrom 39848 1 ide_cd generic 9860 0 [permanent] piix 13444 0 [permanent] sd_mod 33792 5 ide_core 145432 3 ide_cd,generic,piix usbhid 35168 0 hid 42048 1 usbhid ata_generic 13188 0 ahci 34820 4 libata 164016 2 ata_generic,ahci scsi_mod 170808 3 sbp2,sd_mod,libata ohci1394 37172 0 ieee1394 102360 2 sbp2,ohci1394 ehci_hcd 39948 0 uhci_hcd 30368 0 tg3 101508 0 thermal 22944 0 processor 45416 4 acpi_cpufreq,thermal fan 9992 0 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03) Subsystem: Lenovo ThinkPad T60/R60 series [17aa:2017] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Lenovo ThinkPad T60/R60 series [17aa:201a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at ee100000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 1800 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at ee200000 (32-bit, non-prefetchable) [size=256K] Capabilities: <access denied> 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) Subsystem: Lenovo ThinkPad T60/R60 series [17aa:201a] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at ee180000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Lenovo ThinkPad T60/R60 series [17aa:2010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at ee240000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: ee000000-ee0fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00003fff Memory behind bridge: ec000000-edffffff Prefetchable memory behind bridge: 00000000e4000000-00000000e40fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=0b, sec-latency=0 I/O behind bridge: 00004000-00005fff Memory behind bridge: e8000000-e9ffffff Prefetchable memory behind bridge: 00000000e4100000-00000000e41fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0c, subordinate=13, sec-latency=0 I/O behind bridge: 00006000-00007fff Memory behind bridge: ea000000-ebffffff Prefetchable memory behind bridge: 00000000e4200000-00000000e42fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 1820 [size=32] 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 1840 [size=32] 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1860 [size=32] 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 1880 [size=32] 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at ee444000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=15, subordinate=18, sec-latency=32 I/O behind bridge: 00008000-0000bfff Memory behind bridge: e4300000-e7ffffff Prefetchable memory behind bridge: 00000000e0000000-00000000e3ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02) Subsystem: Lenovo ThinkPad T60/R60 series [17aa:2009] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200c] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1810 [size=16] 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller [8086:27c5] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 1275 Region 0: I/O ports at 18d0 [size=8] Region 1: I/O ports at 18c4 [size=4] Region 2: I/O ports at 18c8 [size=8] Region 3: I/O ports at 18c0 [size=4] Region 4: I/O ports at 18b0 [size=16] Region 5: Memory at ee444400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02) Subsystem: Lenovo ThinkPad T60/R60 series [17aa:200f] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 18e0 [size=32] 02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752M Gigabit Ethernet PCI Express [14e4:1601] (rev 02) Subsystem: Lenovo Unknown device [17aa:2020] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at ee000000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 03:00.0 Network controller [0280]: Atheros Communications Inc. AR5418 802.11abgn Wireless PCI Express Adapter [168c:0024] (rev 01) Subsystem: Atheros Communications Inc. Unknown device [168c:0033] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at edf00000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 15:00.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039] Subsystem: Lenovo Unknown device [17aa:2028] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168, Cache Line Size: 128 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e4300000 (32-bit, non-prefetchable) [size=4K] Bus: primary=15, secondary=16, subordinate=17, sec-latency=176 Memory window 0: e0000000-e3fff000 (prefetchable) Memory window 1: 50000000-53fff000 I/O window 0: 00008000-000080ff I/O window 1: 00008400-000084ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 15:00.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10 [OHCI]) Subsystem: Lenovo Unknown device [17aa:207f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max) Interrupt: pin B routed to IRQ 17 Region 0: Memory at e4302000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at e4304000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 15:00.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b] Subsystem: Lenovo Unknown device [17aa:207c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1750ns min, 1000ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at e4301000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 15:00.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c] (prog-if 01) Subsystem: Lenovo Unknown device [17aa:207d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1750ns min, 1000ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at e4302800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.24-etchnhalf.1-amd64 Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15) Versions of packages linux-image-2.6.24-etchnhalf.1-amd64 depends on: ii debconf [debconf-2.0] 1.5.11etch2 Debian configuration management sy ii initramfs-tools [linux-initr 0.85i tools for generating an initramfs ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo linux-image-2.6.24-etchnhalf.1-amd64 recommends no packages. -- debconf information: linux-image-2.6.24-etchnhalf.1-amd64/postinst/depmod-error-initrd-2.6.24-etchnhalf.1-amd64: false linux-image-2.6.24-etchnhalf.1-amd64/postinst/kimage-is-a-directory: shared/kernel-image/really-run-bootloader: true linux-image-2.6.24-etchnhalf.1-amd64/postinst/old-dir-initrd-link-2.6.24-etchnhalf.1-amd64: true linux-image-2.6.24-etchnhalf.1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.24-etchnhalf.1-amd64/preinst/abort-overwrite-2.6.24-etchnhalf.1-amd64: linux-image-2.6.24-etchnhalf.1-amd64/preinst/overwriting-modules-2.6.24-etchnhalf.1-amd64: true linux-image-2.6.24-etchnhalf.1-amd64/preinst/bootloader-initrd-2.6.24-etchnhalf.1-amd64: true linux-image-2.6.24-etchnhalf.1-amd64/preinst/lilo-initrd-2.6.24-etchnhalf.1-amd64: true linux-image-2.6.24-etchnhalf.1-amd64/preinst/failed-to-move-modules-2.6.24-etchnhalf.1-amd64: linux-image-2.6.24-etchnhalf.1-amd64/postinst/bootloader-test-error-2.6.24-etchnhalf.1-amd64: linux-image-2.6.24-etchnhalf.1-amd64/postinst/create-kimage-link-2.6.24-etchnhalf.1-amd64: true linux-image-2.6.24-etchnhalf.1-amd64/postinst/depmod-error-2.6.24-etchnhalf.1-amd64: false linux-image-2.6.24-etchnhalf.1-amd64/preinst/abort-install-2.6.24-etchnhalf.1-amd64: linux-image-2.6.24-etchnhalf.1-amd64/postinst/old-initrd-link-2.6.24-etchnhalf.1-amd64: true linux-image-2.6.24-etchnhalf.1-amd64/preinst/initrd-2.6.24-etchnhalf.1-amd64: linux-image-2.6.24-etchnhalf.1-amd64/preinst/elilo-initrd-2.6.24-etchnhalf.1-amd64: true linux-image-2.6.24-etchnhalf.1-amd64/postinst/bootloader-error-2.6.24-etchnhalf.1-amd64: linux-image-2.6.24-etchnhalf.1-amd64/postinst/old-system-map-link-2.6.24-etchnhalf.1-amd64: true linux-image-2.6.24-etchnhalf.1-amd64/prerm/removing-running-kernel-2.6.24-etchnhalf.1-amd64: true linux-image-2.6.24-etchnhalf.1-amd64/prerm/would-invalidate-boot-loader-2.6.24-etchnhalf.1-amd64: true
-- Package-specific info: Contents of /var/lib/x11/X.roster: xserver-xorg /etc/X11/X target does not match checksum in /var/lib/x11/X.md5sum. X server symlink status: lrwxrwxrwx 1 root root 13 2008-07-28 23:16 /etc/X11/X -> /usr/bin/Xorg -rwxr-xr-x 1 root root 1741696 2008-06-02 01:42 /usr/bin/Xorg Contents of /var/lib/x11/xorg.conf.roster: xserver-xorg VGA-compatible devices on PCI bus: 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) /etc/X11/xorg.conf unchanged from checksum in /var/lib/x11/xorg.conf.md5sum. Xorg X server configuration file status: -rw-r--r-- 1 root root 3120 2008-07-28 23:16 /etc/X11/xorg.conf Contents of /etc/X11/xorg.conf: # /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "Files" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" # path to defoma fonts FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "de" Option "XkbVariant" "nodeadkeys" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" EndSection Section "InputDevice" Identifier "Synaptics Touchpad" Driver "synaptics" Option "SendCoreEvents" "true" Option "Device" "/dev/psaux" Option "Protocol" "auto-dev" Option "HorizScrollDelta" "0" EndSection Section "Device" Identifier "Standardgrafikkarte" Driver "i810" BusID "PCI:0:2:0" EndSection Section "Monitor" Identifier "Standardbildschirm" Option "DPMS" EndSection Section "Screen" Identifier "Default Screen" Device "Standardgrafikkarte" Monitor "Standardbildschirm" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x800" EndSubSection SubSection "Display" Depth 4 Modes "1280x800" EndSubSection SubSection "Display" Depth 8 Modes "1280x800" EndSubSection SubSection "Display" Depth 15 Modes "1280x800" EndSubSection SubSection "Display" Depth 16 Modes "1280x800" EndSubSection SubSection "Display" Depth 24 Modes "1280x800" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "Synaptics Touchpad" EndSection Section "DRI" Mode 0666 EndSection Xorg X server log files on system: -rw-r--r-- 1 root root 325168 2008-08-18 23:57 /var/log/Xorg.0.log Contents of most recent Xorg X server log file /var/log/Xorg.0.log: X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: UNKNOWN Current Operating System: Linux klappi 2.6.24-etchnhalf.1-amd64 #1 SMP Mon Jul 21 10:36:02 UTC 2008 x86_64 Build Date: 01 June 2008 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 18 19:56:02 2008 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Standardbildschirm" (**) | |-->Device "Standardgrafikkarte" (**) |-->Input Device "Generic Keyboard" (**) |-->Input Device "Configured Mouse" (**) |-->Input Device "Synaptics Touchpad" (WW) The directory "/usr/X11R6/lib/X11/fonts/misc" does not exist. Entry deleted from font path. (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi/" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/Type1" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/75dpi" does not exist. Entry deleted from font path. (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) RgbPath set to "/etc/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (II) Open ACPI successful (/var/run/acpid.socket) (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,27a0 card 17aa,2017 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,27a2 card 17aa,201a rev 03 class 03,00,00 hdr 80 (II) PCI: 00:02:1: chip 8086,27a6 card 17aa,201a rev 03 class 03,80,00 hdr 80 (II) PCI: 00:1b:0: chip 8086,27d8 card 17aa,2010 rev 02 class 04,03,00 hdr 00 (II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1c:3: chip 8086,27d6 card 0000,0000 rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1d:0: chip 8086,27c8 card 17aa,200a rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,27c9 card 17aa,200a rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,27ca card 17aa,200a rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:3: chip 8086,27cb card 17aa,200a rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,27cc card 17aa,200b rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01 (II) PCI: 00:1f:0: chip 8086,27b9 card 17aa,2009 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,27df card 17aa,200c rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:2: chip 8086,27c5 card 17aa,200d rev 02 class 01,06,01 hdr 00 (II) PCI: 00:1f:3: chip 8086,27da card 17aa,200f rev 02 class 0c,05,00 hdr 00 (II) PCI: 02:00:0: chip 14e4,1601 card 17aa,2020 rev 02 class 02,00,00 hdr 00 (II) PCI: 03:00:0: chip 168c,0024 card 168c,0033 rev 01 class 02,80,00 hdr 00 (II) PCI: 15:00:0: chip 104c,8039 card 8000,0000 rev 00 class 06,07,00 hdr 82 (II) PCI: 15:00:1: chip 104c,803a card 17aa,207f rev 00 class 0c,00,10 hdr 80 (II) PCI: 15:00:2: chip 104c,803b card 17aa,207c rev 00 class 01,80,00 hdr 80 (II) PCI: 15:00:3: chip 104c,803c card 17aa,207d rev 00 class 08,05,01 hdr 80 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,22), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xee000000 - 0xee0fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:28:1), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 3 I/O range: [0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B] [2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B] [3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B] [4] -1 0 0x00003000 - 0x000030ff (0x100) IX[B] [5] -1 0 0x00003400 - 0x000034ff (0x100) IX[B] [6] -1 0 0x00003800 - 0x000038ff (0x100) IX[B] [7] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B] (II) Bus 3 non-prefetchable memory range: [0] -1 0 0xec000000 - 0xedffffff (0x2000000) MX[B] (II) Bus 3 prefetchable memory range: [0] -1 0 0xe4000000 - 0xe40fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 4: bridge is at (0:28:2), (0,4,11), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 4 I/O range: [0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B] [3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B] [4] -1 0 0x00005000 - 0x000050ff (0x100) IX[B] [5] -1 0 0x00005400 - 0x000054ff (0x100) IX[B] [6] -1 0 0x00005800 - 0x000058ff (0x100) IX[B] [7] -1 0 0x00005c00 - 0x00005cff (0x100) IX[B] (II) Bus 4 non-prefetchable memory range: [0] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B] (II) Bus 4 prefetchable memory range: [0] -1 0 0xe4100000 - 0xe41fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 12: bridge is at (0:28:3), (0,12,19), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 12 I/O range: [0] -1 0 0x00006000 - 0x000060ff (0x100) IX[B] [1] -1 0 0x00006400 - 0x000064ff (0x100) IX[B] [2] -1 0 0x00006800 - 0x000068ff (0x100) IX[B] [3] -1 0 0x00006c00 - 0x00006cff (0x100) IX[B] [4] -1 0 0x00007000 - 0x000070ff (0x100) IX[B] [5] -1 0 0x00007400 - 0x000074ff (0x100) IX[B] [6] -1 0 0x00007800 - 0x000078ff (0x100) IX[B] [7] -1 0 0x00007c00 - 0x00007cff (0x100) IX[B] (II) Bus 12 non-prefetchable memory range: [0] -1 0 0xea000000 - 0xebffffff (0x2000000) MX[B] (II) Bus 12 prefetchable memory range: [0] -1 0 0xe4200000 - 0xe42fffff (0x100000) MX[B] (II) Subtractive PCI-to-PCI bridge: (II) Bus 21: bridge is at (0:30:0), (0,21,24), BCTRL: 0x0000 (VGA_EN is cleared) (II) Bus 21 I/O range: [0] -1 0 0x00008000 - 0x0000bfff (0x4000) IX[B] (II) Bus 21 non-prefetchable memory range: [0] -1 0 0xe4300000 - 0xe7ffffff (0x3d00000) MX[B] (II) Bus 21 prefetchable memory range: [0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-CardBus bridge: (II) Bus 22: bridge is at (21:0:0), (21,22,23), BCTRL: 0x05c0 (VGA_EN is cleared) (II) Bus 22 I/O range: [0] -1 0 0x00008000 - 0x000080ff (0x100) IX[B] [1] -1 0 0x00008400 - 0x000084ff (0x100) IX[B] (II) Bus 22 prefetchable memory range: [0] -1 0 0xe0000000 - 0xe3ffffff (0x4000000) MX[B] (--) PCI:*(0:2:0) Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xee100000/19, 0xd0000000/28, 0xee200000/18, I/O @ 0x1800/3 (--) PCI: (0:2:1) Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xee180000/19 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xe4302800 - 0xe43028ff (0x100) MX[B] [1] -1 0 0xe4301000 - 0xe4301fff (0x1000) MX[B] [2] -1 0 0xe4304000 - 0xe4307fff (0x4000) MX[B] [3] -1 0 0xe4302000 - 0xe43027ff (0x800) MX[B] [4] -1 0 0xedf00000 - 0xedf0ffff (0x10000) MX[B] [5] -1 0 0xee000000 - 0xee00ffff (0x10000) MX[B] [6] -1 0 0xee444400 - 0xee4447ff (0x400) MX[B] [7] -1 0 0xee444000 - 0xee4443ff (0x400) MX[B] [8] -1 0 0xee240000 - 0xee243fff (0x4000) MX[B] [9] -1 0 0xee180000 - 0xee1fffff (0x80000) MX[B](B) [10] -1 0 0xee200000 - 0xee23ffff (0x40000) MX[B](B) [11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [12] -1 0 0xee100000 - 0xee17ffff (0x80000) MX[B](B) [13] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B] [14] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B] [15] -1 0 0x000018c0 - 0x000018c3 (0x4) IX[B] [16] -1 0 0x000018c8 - 0x000018cf (0x8) IX[B] [17] -1 0 0x000018c4 - 0x000018c7 (0x4) IX[B] [18] -1 0 0x000018d0 - 0x000018d7 (0x8) IX[B] [19] -1 0 0x00001810 - 0x0000181f (0x10) IX[B] [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [24] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] [25] -1 0 0x00001860 - 0x0000187f (0x20) IX[B] [26] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] [27] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [28] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xe4302800 - 0xe43028ff (0x100) MX[B] [1] -1 0 0xe4301000 - 0xe4301fff (0x1000) MX[B] [2] -1 0 0xe4304000 - 0xe4307fff (0x4000) MX[B] [3] -1 0 0xe4302000 - 0xe43027ff (0x800) MX[B] [4] -1 0 0xedf00000 - 0xedf0ffff (0x10000) MX[B] [5] -1 0 0xee000000 - 0xee00ffff (0x10000) MX[B] [6] -1 0 0xee444400 - 0xee4447ff (0x400) MX[B] [7] -1 0 0xee444000 - 0xee4443ff (0x400) MX[B] [8] -1 0 0xee240000 - 0xee243fff (0x4000) MX[B] [9] -1 0 0xee180000 - 0xee1fffff (0x80000) MX[B](B) [10] -1 0 0xee200000 - 0xee23ffff (0x40000) MX[B](B) [11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [12] -1 0 0xee100000 - 0xee17ffff (0x80000) MX[B](B) [13] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B] [14] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B] [15] -1 0 0x000018c0 - 0x000018c3 (0x4) IX[B] [16] -1 0 0x000018c8 - 0x000018cf (0x8) IX[B] [17] -1 0 0x000018c4 - 0x000018c7 (0x4) IX[B] [18] -1 0 0x000018d0 - 0x000018d7 (0x8) IX[B] [19] -1 0 0x00001810 - 0x0000181f (0x10) IX[B] [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [22] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [24] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] [25] -1 0 0x00001860 - 0x0000187f (0x20) IX[B] [26] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] [27] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [28] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xe4302800 - 0xe43028ff (0x100) MX[B] [5] -1 0 0xe4301000 - 0xe4301fff (0x1000) MX[B] [6] -1 0 0xe4304000 - 0xe4307fff (0x4000) MX[B] [7] -1 0 0xe4302000 - 0xe43027ff (0x800) MX[B] [8] -1 0 0xedf00000 - 0xedf0ffff (0x10000) MX[B] [9] -1 0 0xee000000 - 0xee00ffff (0x10000) MX[B] [10] -1 0 0xee444400 - 0xee4447ff (0x400) MX[B] [11] -1 0 0xee444000 - 0xee4443ff (0x400) MX[B] [12] -1 0 0xee240000 - 0xee243fff (0x4000) MX[B] [13] -1 0 0xee180000 - 0xee1fffff (0x80000) MX[B](B) [14] -1 0 0xee200000 - 0xee23ffff (0x40000) MX[B](B) [15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [16] -1 0 0xee100000 - 0xee17ffff (0x80000) MX[B](B) [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [19] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B] [20] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B] [21] -1 0 0x000018c0 - 0x000018c3 (0x4) IX[B] [22] -1 0 0x000018c8 - 0x000018cf (0x8) IX[B] [23] -1 0 0x000018c4 - 0x000018c7 (0x4) IX[B] [24] -1 0 0x000018d0 - 0x000018d7 (0x8) IX[B] [25] -1 0 0x00001810 - 0x0000181f (0x10) IX[B] [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [30] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] [31] -1 0 0x00001860 - 0x0000187f (0x20) IX[B] [32] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] [33] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [34] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B) (II) LoadModule: "i2c" (II) Loading /usr/lib/xorg/modules/libi2c.so (II) Module i2c: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.2.0 ABI class: X.Org Video Driver, version 1.0 (II) LoadModule: "bitmap" (II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so (II) Loading font Bitmap (II) LoadModule: "ddc" (II) Loading /usr/lib/xorg/modules/libddc.so (II) Module ddc: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/lib/xorg/modules/linux/libdrm.so (II) Module drm: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.1.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions/libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules/libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules/libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 ABI class: X.Org Video Driver, version 1.0 (II) LoadModule: "i810" (II) Loading /usr/lib/xorg/modules/drivers/i810_drv.so (II) Module i810: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.7.2 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 1.0 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "synaptics" (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so (II) Module synaptics: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.3 (II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ (II) Primary Device is: PCI 00:02:0 (WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found (--) Chipset 945GM found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xe4302800 - 0xe43028ff (0x100) MX[B] [5] -1 0 0xe4301000 - 0xe4301fff (0x1000) MX[B] [6] -1 0 0xe4304000 - 0xe4307fff (0x4000) MX[B] [7] -1 0 0xe4302000 - 0xe43027ff (0x800) MX[B] [8] -1 0 0xedf00000 - 0xedf0ffff (0x10000) MX[B] [9] -1 0 0xee000000 - 0xee00ffff (0x10000) MX[B] [10] -1 0 0xee444400 - 0xee4447ff (0x400) MX[B] [11] -1 0 0xee444000 - 0xee4443ff (0x400) MX[B] [12] -1 0 0xee240000 - 0xee243fff (0x4000) MX[B] [13] -1 0 0xee180000 - 0xee1fffff (0x80000) MX[B](B) [14] -1 0 0xee200000 - 0xee23ffff (0x40000) MX[B](B) [15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [16] -1 0 0xee100000 - 0xee17ffff (0x80000) MX[B](B) [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [19] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B] [20] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B] [21] -1 0 0x000018c0 - 0x000018c3 (0x4) IX[B] [22] -1 0 0x000018c8 - 0x000018cf (0x8) IX[B] [23] -1 0 0x000018c4 - 0x000018c7 (0x4) IX[B] [24] -1 0 0x000018d0 - 0x000018d7 (0x8) IX[B] [25] -1 0 0x00001810 - 0x0000181f (0x10) IX[B] [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [28] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [29] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [30] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] [31] -1 0 0x00001860 - 0x0000187f (0x20) IX[B] [32] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] [33] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [34] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xe4302800 - 0xe43028ff (0x100) MX[B] [5] -1 0 0xe4301000 - 0xe4301fff (0x1000) MX[B] [6] -1 0 0xe4304000 - 0xe4307fff (0x4000) MX[B] [7] -1 0 0xe4302000 - 0xe43027ff (0x800) MX[B] [8] -1 0 0xedf00000 - 0xedf0ffff (0x10000) MX[B] [9] -1 0 0xee000000 - 0xee00ffff (0x10000) MX[B] [10] -1 0 0xee444400 - 0xee4447ff (0x400) MX[B] [11] -1 0 0xee444000 - 0xee4443ff (0x400) MX[B] [12] -1 0 0xee240000 - 0xee243fff (0x4000) MX[B] [13] -1 0 0xee180000 - 0xee1fffff (0x80000) MX[B](B) [14] -1 0 0xee200000 - 0xee23ffff (0x40000) MX[B](B) [15] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [16] -1 0 0xee100000 - 0xee17ffff (0x80000) MX[B](B) [17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [21] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [22] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B] [23] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B] [24] -1 0 0x000018c0 - 0x000018c3 (0x4) IX[B] [25] -1 0 0x000018c8 - 0x000018cf (0x8) IX[B] [26] -1 0 0x000018c4 - 0x000018c7 (0x4) IX[B] [27] -1 0 0x000018d0 - 0x000018d7 (0x8) IX[B] [28] -1 0 0x00001810 - 0x0000181f (0x10) IX[B] [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [31] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [32] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [33] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] [34] -1 0 0x00001860 - 0x0000187f (0x20) IX[B] [35] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] [36] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [37] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B) [38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/lib/xorg/modules/libint10.so (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Reloading /usr/lib/xorg/modules/libvbe.so (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules/libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 7.1.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.0 (**) I810(0): Depth 24, (--) framebuffer bpp 32 (==) I810(0): RGB weight 888 (==) I810(0): Default visual is TrueColor (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/lib/xorg/modules/libint10.so (II) I810(0): initializing int10 (WW) I810(0): Bad V_BIOS checksum (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 7872 kB (II) I810(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) I810(0): Integrated Graphics Chipset: Intel(R) 945GM (--) I810(0): Chipset: "945GM" (--) I810(0): Linear framebuffer at 0xD0000000 (--) I810(0): IO registers at addr 0xEE100000 (II) I810(0): 2 display pipes available. (II) I810(0): detected 7932 kB stolen memory. (II) I810(0): Kernel reported 238592 total, 1 used (II) I810(0): I830CheckAvailableMemory: 954364 kB available (II) I810(0): Monitoring connected displays enabled (II) I810(0): Will attempt to tell the BIOS that there is 12288 kB VideoRAM (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/lib/xorg/modules/libint10.so (II) I810(0): initializing int10 (WW) I810(0): Bad V_BIOS checksum (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 12288 kB (II) I810(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) I810(0): BIOS now sees 12288 kB VideoRAM (--) I810(0): Pre-allocated VideoRAM: 7932 kByte (==) I810(0): VideoRAM: 65536 kByte (==) I810(0): video overlay key set to 0x101fe (**) I810(0): page flipping disabled (==) I810(0): Using gamma correction (1.0, 1.0, 1.0) (II) I810(0): BIOS Build: 1313 (==) I810(0): Device Presence: disabled. (==) I810(0): Display Info: enabled. (II) I810(0): Broken BIOSes cause the system to hang here. If you encounter this problem please add Option "DisplayInfo" "FALSE" to the Device section of your XF86Config file. (II) I810(0): Display Info: CRT: attached: FALSE, present: TRUE, size: (1024,768) (II) I810(0): Display Info: TV: attached: FALSE, present: TRUE, size: (1024,768) (II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: FALSE, size: (0,2059) (II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present: TRUE, size: (1280,800) (II) I810(0): Display Info: Second (second CRT): attached: FALSE, present: FALSE, size: (0,2059) (II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,2059) (II) I810(0): Display Info: DFP2 (second digital flat panel): attached: FALSE, present: FALSE, size: (0,2059) (II) I810(0): Display Info: LFP2 (second local flat panel): attached: FALSE, present: FALSE, size: (0,2059) (II) I810(0): Size of device LFP (local flat panel) is 1280 x 800 (II) I810(0): No active displays on Pipe A. (II) I810(0): Currently active displays on Pipe B: (II) I810(0): LFP (local flat panel) (II) I810(0): Lowest common panel size for pipe B is 1280 x 800 (==) I810(0): Display is using Pipe B (--) I810(0): Maximum frambuffer space: 65368 kByte (II) I810(0): VESA VBE PanelID read successfully (II) I810(0): PanelID returned panel resolution : 1280x800 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/lib/xorg/modules/libddc.so (II) I810(0): VESA VBE DDC supported (II) I810(0): VESA VBE DDC Level none (II) I810(0): VESA VBE DDC transfer in appr. 0 sec. (II) I810(0): VESA VBE DDC read successfully (II) I810(0): Manufacturer: LEN Model: 4050 Serial#: 0 (II) I810(0): Year: 2005 Week: 0 (II) I810(0): EDID Version: 1.3 (II) I810(0): Digital Display Input (II) I810(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21 (II) I810(0): Gamma: 2.20 (II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) I810(0): First detailed timing is preferred mode (II) I810(0): redX: 0.569 redY: 0.332 greenX: 0.312 greenY: 0.544 (II) I810(0): blueX: 0.149 blueY: 0.132 whiteX: 0.313 whiteY: 0.329 (II) I810(0): Supported VESA Video Modes: (II) I810(0): 640x480@60Hz (II) I810(0): 800x600@60Hz (II) I810(0): 1024x768@60Hz (II) I810(0): Manufacturer's mask: 0 (II) I810(0): Supported additional Video Mode: (II) I810(0): clock: 71.1 MHz Image Size: 331 x 207 mm (II) I810(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0 (II) I810(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0 (II) I810(0): Supported additional Video Mode: (II) I810(0): clock: 59.3 MHz Image Size: 331 x 207 mm (II) I810(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0 (II) I810(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0 (II) I810(0): LTN154X3-L0A (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (--) I810(0): Maximum space available for video modes: 12288 kByte Mode: 30 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 640 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 37 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 640 BnkNumberOfImagePages: 37 LinNumberOfImagePages: 37 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 32 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 832 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 23 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 832 BnkNumberOfImagePages: 23 LinNumberOfImagePages: 23 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 34 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1024 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 15 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1024 BnkNumberOfImagePages: 15 LinNumberOfImagePages: 15 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 38 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 3a (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 3c (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 41 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1280 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 18 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 18 LinNumberOfImagePages: 18 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 43 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1600 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 11 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1600 BnkNumberOfImagePages: 11 LinNumberOfImagePages: 11 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 45 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 2048 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 7 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2048 BnkNumberOfImagePages: 7 LinNumberOfImagePages: 7 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 49 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 4b (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 4d (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 *Mode: 50 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 2560 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 9 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 9 LinNumberOfImagePages: 9 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *Mode: 52 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 3200 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 5 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 3200 BnkNumberOfImagePages: 5 LinNumberOfImagePages: 5 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *Mode: 54 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 4096 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 3 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 4096 BnkNumberOfImagePages: 3 LinNumberOfImagePages: 3 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 Mode: 58 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 5a (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 5c (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 60 (768x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 768 XResolution: 768 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 31 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 768 BnkNumberOfImagePages: 31 LinNumberOfImagePages: 31 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 61 (768x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1536 XResolution: 768 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 15 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1536 BnkNumberOfImagePages: 15 LinNumberOfImagePages: 15 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 *Mode: 62 (768x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 3072 XResolution: 768 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 7 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 3072 BnkNumberOfImagePages: 7 LinNumberOfImagePages: 7 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 Mode: 63 (960x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 960 XResolution: 960 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 20 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 960 BnkNumberOfImagePages: 20 LinNumberOfImagePages: 20 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 64 (960x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1920 XResolution: 960 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 9 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1920 BnkNumberOfImagePages: 9 LinNumberOfImagePages: 9 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 *Mode: 65 (960x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 3840 XResolution: 960 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 4 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 3840 BnkNumberOfImagePages: 4 LinNumberOfImagePages: 4 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 Mode: 66 (1280x800) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1280 XResolution: 1280 YResolution: 800 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 11 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 11 LinNumberOfImagePages: 11 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 67 (1280x800) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 2560 XResolution: 1280 YResolution: 800 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 5 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 5 LinNumberOfImagePages: 5 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 *Mode: 68 (1280x800) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 5120 XResolution: 1280 YResolution: 800 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 2 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 5120 BnkNumberOfImagePages: 2 LinNumberOfImagePages: 2 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 Mode: 69 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6a (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6b (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6c (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6d (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6e (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6f (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 70 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 71 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (WW) I810(0): config file hsync range 45.7143-50.5263kHz not within DDC hsync ranges. (II) I810(0): Standardbildschirm: Using hsync range of 45.71-50.53 kHz (II) I810(0): Standardbildschirm: Using vrefresh value of 60.00 Hz (II) I810(0): Increasing the scanline pitch to allow tiling mode (1280 -> 2048). (--) I810(0): Virtual size is 1280x800 (pitch 2048) (**) I810(0): *Built-in mode "1280x800" (**) I810(0): Built-in mode "1024x768" (--) I810(0): Display dimensions: (330, 210) mm (--) I810(0): DPI set to (98, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules/libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.2.0 ABI class: X.Org Video Driver, version 1.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib/xorg/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 7.1.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.0 (==) I810(0): VBE Restore workaround: enabled. (II) Loading sub module "shadow" (II) LoadModule: "shadow" (II) Loading /usr/lib/xorg/modules/libshadow.so (II) Module shadow: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 ABI class: X.Org ANSI C Emulation, version 0.3 (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xee200000 - 0xee23ffff (0x40000) MS[B] [1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MS[B] [2] 0 0 0xee100000 - 0xee17ffff (0x80000) MS[B] [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xe4302800 - 0xe43028ff (0x100) MX[B] [8] -1 0 0xe4301000 - 0xe4301fff (0x1000) MX[B] [9] -1 0 0xe4304000 - 0xe4307fff (0x4000) MX[B] [10] -1 0 0xe4302000 - 0xe43027ff (0x800) MX[B] [11] -1 0 0xedf00000 - 0xedf0ffff (0x10000) MX[B] [12] -1 0 0xee000000 - 0xee00ffff (0x10000) MX[B] [13] -1 0 0xee444400 - 0xee4447ff (0x400) MX[B] [14] -1 0 0xee444000 - 0xee4443ff (0x400) MX[B] [15] -1 0 0xee240000 - 0xee243fff (0x4000) MX[B] [16] -1 0 0xee180000 - 0xee1fffff (0x80000) MX[B](B) [17] -1 0 0xee200000 - 0xee23ffff (0x40000) MX[B](B) [18] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [19] -1 0 0xee100000 - 0xee17ffff (0x80000) MX[B](B) [20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [23] 0 0 0x00001800 - 0x00001807 (0x8) IS[B] [24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [25] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [26] -1 0 0x000018e0 - 0x000018ff (0x20) IX[B] [27] -1 0 0x000018b0 - 0x000018bf (0x10) IX[B] [28] -1 0 0x000018c0 - 0x000018c3 (0x4) IX[B] [29] -1 0 0x000018c8 - 0x000018cf (0x8) IX[B] [30] -1 0 0x000018c4 - 0x000018c7 (0x4) IX[B] [31] -1 0 0x000018d0 - 0x000018d7 (0x8) IX[B] [32] -1 0 0x00001810 - 0x0000181f (0x10) IX[B] [33] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [34] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [35] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B] [36] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B] [37] -1 0 0x00001880 - 0x0000189f (0x20) IX[B] [38] -1 0 0x00001860 - 0x0000187f (0x20) IX[B] [39] -1 0 0x00001840 - 0x0000185f (0x20) IX[B] [40] -1 0 0x00001820 - 0x0000183f (0x20) IX[B] [41] -1 0 0x00001800 - 0x00001807 (0x8) IX[B](B) [42] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [43] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/lib/xorg/modules/libint10.so (II) I810(0): initializing int10 (WW) I810(0): Bad V_BIOS checksum (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 7872 kB (II) I810(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) I810(0): Allocated 128 kB for the ring buffer at 0x0 (II) I810(0): Allocating at least 256 scanlines for pixmap cache (II) I810(0): Initial framebuffer allocation size: 12288 kByte (II) I810(0): Allocated 4 kB for HW cursor at 0xffff000 (0x38d70000) (II) I810(0): Allocated 16 kB for HW (ARGB) cursor at 0xfffb000 (0x38d94000) (II) I810(0): Allocated 4 kB for Overlay registers at 0xfffa000 (0x38d5f000). (II) I810(0): Allocated 64 kB for the scratch buffer at 0xffea000 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) I810(0): [drm] loaded kernel module for "i915" driver (II) I810(0): [drm] DRM interface version 1.3 (II) I810(0): [drm] created "i915" driver at busid "pci:0000:00:02.0" (II) I810(0): [drm] added 8192 byte SAREA at 0x1efff000 (II) I810(0): [drm] mapped SAREA 0x1efff000 to 0x2b86ae4b3000 (II) I810(0): [drm] framebuffer handle = 0xd0020000 (II) I810(0): [drm] added 1 reserved context for kernel (II) I810(0): Allocated 32 kB for the logical context at 0xffe2000. (II) I810(0): Allocated 6400 kB for the back buffer at 0xf000000. (II) I810(0): Allocated 6400 kB for the depth buffer at 0xe800000. (II) I810(0): Allocated 40192 kB for textures at 0xc0c0000 (II) I810(0): 0x6ed9d0: Memory at offset 0x00020000, size 12288 kBytes (II) I810(0): 0x7deaa0: Memory at offset 0x0ffff000, size 4 kBytes (II) I810(0): 0x7dede0: Memory at offset 0x0fffb000, size 16 kBytes (II) I810(0): 0x7dee38: Memory at offset 0x00000000, size 128 kBytes (II) I810(0): 0x6eda50: Memory at offset 0x0ffea000, size 64 kBytes (II) I810(0): 0x7deea0: Memory at offset 0x0fffa000, size 4 kBytes (II) I810(0): 0x6edcd0: Memory at offset 0x0ffe2000, size 32 kBytes (II) I810(0): 0x6edd10: Memory at offset 0x0f000000, size 6400 kBytes (II) I810(0): 0x6edd50: Memory at offset 0x0e800000, size 6400 kBytes (II) I810(0): 0x6edd90: Memory at offset 0x0c0c0000, size 40192 kBytes (II) I810(0): Activating tiled memory for the back buffer. (II) I810(0): Activating tiled memory for the depth buffer. (II) I810(0): [drm] Registers = 0xee100000 (II) I810(0): [drm] ring buffer = 0xd0000000 (II) I810(0): [drm] init sarea width,height = 1280 x 800 (pitch 2048) (II) I810(0): [drm] Mapping front buffer (II) I810(0): [drm] Front Buffer = 0x2fff9000 (II) I810(0): [drm] Back Buffer = 0xdf000000 (II) I810(0): [drm] Depth Buffer = 0xde800000 (II) I810(0): [drm] textures = 0xdc0c0000 (II) I810(0): [drm] Initialized kernel agp heap manager, 41156608 (II) I810(0): [dri] visual configs initialized (==) I810(0): Write-combining range (0xd0000000,0x10000000) (II) I810(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) I810(0): xf86BindGARTMemory: bind key 8 at 0x007bf000 (pgoffset 1983) (II) I810(0): xf86BindGARTMemory: bind key 0 at 0x0ffff000 (pgoffset 65535) (II) I810(0): xf86BindGARTMemory: bind key 1 at 0x0fffb000 (pgoffset 65531) (II) I810(0): xf86BindGARTMemory: bind key 3 at 0x0ffea000 (pgoffset 65514) (II) I810(0): xf86BindGARTMemory: bind key 2 at 0x0fffa000 (pgoffset 65530) (II) I810(0): xf86BindGARTMemory: bind key 4 at 0x0ffe2000 (pgoffset 65506) (II) I810(0): xf86BindGARTMemory: bind key 5 at 0x0f000000 (pgoffset 61440) (II) I810(0): xf86BindGARTMemory: bind key 6 at 0x0e800000 (pgoffset 59392) (II) I810(0): xf86BindGARTMemory: bind key 7 at 0x0c0c0000 (pgoffset 49344) (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) I810(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Horizontal and Vertical Lines Offscreen Pixmaps Setting up tile and stipple cache: 16 128x128 slots 4 256x256 slots (==) I810(0): Backing store disabled (==) I810(0): Silken mouse enabled (II) I810(0): Initializing HW Cursor (**) Option "dpms" (**) I810(0): DPMS enabled (II) I810(0): Set up overlay video (II) I810(0): Set up textured video (II) I810(0): X context handle = 0x1 (II) I810(0): [drm] installed DRM signal handler (II) I810(0): [DRI] installation complete (II) I810(0): [drm] dma control initialized, using IRQ 16 (II) I810(0): direct rendering: Enabled (II) I810(0): RandR enabled, ignore the following RandR disabled message. (II) I810(0): Rotating to 0 degrees (--) RandR disabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (WW) AIGLX: 3D driver claims to not support visual 0x23 (WW) AIGLX: 3D driver claims to not support visual 0x24 (WW) AIGLX: 3D driver claims to not support visual 0x25 (WW) AIGLX: 3D driver claims to not support visual 0x26 (WW) AIGLX: 3D driver claims to not support visual 0x27 (WW) AIGLX: 3D driver claims to not support visual 0x28 (WW) AIGLX: 3D driver claims to not support visual 0x29 (WW) AIGLX: 3D driver claims to not support visual 0x2a (WW) AIGLX: 3D driver claims to not support visual 0x2b (WW) AIGLX: 3D driver claims to not support visual 0x2c (WW) AIGLX: 3D driver claims to not support visual 0x2d (WW) AIGLX: 3D driver claims to not support visual 0x2e (WW) AIGLX: 3D driver claims to not support visual 0x2f (WW) AIGLX: 3D driver claims to not support visual 0x30 (WW) AIGLX: 3D driver claims to not support visual 0x31 (WW) AIGLX: 3D driver claims to not support visual 0x32 (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (**) Option "CoreKeyboard" (**) Generic Keyboard: Core Keyboard (**) Option "Protocol" "standard" (**) Generic Keyboard: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Generic Keyboard: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Generic Keyboard: XkbModel: "pc105" (**) Option "XkbLayout" "de" (**) Generic Keyboard: XkbLayout: "de" (**) Option "XkbVariant" "nodeadkeys" (**) Generic Keyboard: XkbVariant: "nodeadkeys" (**) Option "CustomKeycodes" "off" (**) Generic Keyboard: CustomKeycodes disabled (**) Option "Protocol" "ImPS/2" (**) Configured Mouse: Device: "/dev/input/mice" (**) Configured Mouse: Protocol: "ImPS/2" (**) Option "CorePointer" (**) Configured Mouse: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "true" (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 (**) Configured Mouse: Buttons: 9 (II) Synaptics touchpad driver version 0.14.6 (1406) (--) Synaptics Touchpad auto-dev sets device to /dev/input/event10 (**) Option "Device" "/dev/input/event10" (**) Option "HorizScrollDelta" "0" (--) Synaptics Touchpad touchpad found (**) Option "SendCoreEvents" "true" (**) Synaptics Touchpad: always reports core events (II) XINPUT: Adding extended input device "Synaptics Touchpad" (type: MOUSE) (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) (II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD) xkb_keycodes { include "xfree86+aliases(qwertz)" }; xkb_types { include "complete" }; xkb_compatibility { include "complete" }; xkb_symbols { include "pc(pc105)+de(nodeadkeys)" }; xkb_geometry { include "pc(pc105)" }; Synaptics DeviceInit called SynapticsCtrl called. (II) Configured Mouse: ps2EnableDataReporting: succeeded Synaptics DeviceOn called (--) Synaptics Touchpad auto-dev sets device to /dev/input/event10 (**) Option "Device" "/dev/input/event10" (--) Synaptics Touchpad touchpad found (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x0, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s Synaptics DeviceOff called (II) AIGLX: Suspending AIGLX clients for VT switch (WW) I810(0): Successfully set original devices (WW) I810(0): Setting the original video mode instead of restoring the saved state (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE 3 method. (II) I810(0): xf86UnbindGARTMemory: unbind key 8 (II) I810(0): xf86UnbindGARTMemory: unbind key 0 (II) I810(0): xf86UnbindGARTMemory: unbind key 1 (II) I810(0): xf86UnbindGARTMemory: unbind key 3 (II) I810(0): xf86UnbindGARTMemory: unbind key 2 (II) I810(0): xf86UnbindGARTMemory: unbind key 4 (II) I810(0): xf86UnbindGARTMemory: unbind key 5 (II) I810(0): xf86UnbindGARTMemory: unbind key 6 (II) I810(0): xf86UnbindGARTMemory: unbind key 7 (WW) I810(0): Successfully set original devices (2) (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) I810(0): xf86BindGARTMemory: bind key 8 at 0x007bf000 (pgoffset 1983) (II) I810(0): xf86BindGARTMemory: bind key 0 at 0x0ffff000 (pgoffset 65535) (II) I810(0): xf86BindGARTMemory: bind key 1 at 0x0fffb000 (pgoffset 65531) (II) I810(0): xf86BindGARTMemory: bind key 3 at 0x0ffea000 (pgoffset 65514) (II) I810(0): xf86BindGARTMemory: bind key 2 at 0x0fffa000 (pgoffset 65530) (II) I810(0): xf86BindGARTMemory: bind key 4 at 0x0ffe2000 (pgoffset 65506) (II) I810(0): xf86BindGARTMemory: bind key 5 at 0x0f000000 (pgoffset 61440) (II) I810(0): xf86BindGARTMemory: bind key 6 at 0x0e800000 (pgoffset 59392) (II) I810(0): xf86BindGARTMemory: bind key 7 at 0x0c0c0000 (pgoffset 49344) (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/lib/xorg/modules/libddc.so (II) I810(0): VESA VBE DDC supported (II) I810(0): VESA VBE DDC Level 2 (II) I810(0): VESA VBE DDC transfer in appr. 1 sec. (II) I810(0): VESA VBE DDC read successfully (II) I810(0): Manufacturer: LEN Model: 4050 Serial#: 0 (II) I810(0): Year: 2005 Week: 0 (II) I810(0): EDID Version: 1.3 (II) I810(0): Digital Display Input (II) I810(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21 (II) I810(0): Gamma: 2.20 (II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) I810(0): First detailed timing is preferred mode (II) I810(0): redX: 0.569 redY: 0.332 greenX: 0.312 greenY: 0.544 (II) I810(0): blueX: 0.149 blueY: 0.132 whiteX: 0.313 whiteY: 0.329 (II) I810(0): Supported VESA Video Modes: (II) I810(0): 640x480@60Hz (II) I810(0): 800x600@60Hz (II) I810(0): 1024x768@60Hz (II) I810(0): Manufacturer's mask: 0 (II) I810(0): Supported additional Video Mode: (II) I810(0): clock: 71.1 MHz Image Size: 331 x 207 mm (II) I810(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0 (II) I810(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0 (II) I810(0): Supported additional Video Mode: (II) I810(0): clock: 59.3 MHz Image Size: 331 x 207 mm (II) I810(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0 (II) I810(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0 (II) I810(0): LTN154X3-L0A Mode: 30 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 640 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 37 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 640 BnkNumberOfImagePages: 37 LinNumberOfImagePages: 37 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 32 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 832 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 23 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 832 BnkNumberOfImagePages: 23 LinNumberOfImagePages: 23 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 34 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1024 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 15 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1024 BnkNumberOfImagePages: 15 LinNumberOfImagePages: 15 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 38 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 3a (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 3c (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 41 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1280 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 18 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 18 LinNumberOfImagePages: 18 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 43 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1600 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 11 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1600 BnkNumberOfImagePages: 11 LinNumberOfImagePages: 11 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 45 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 2048 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 7 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2048 BnkNumberOfImagePages: 7 LinNumberOfImagePages: 7 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 49 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 4b (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 4d (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 *Mode: 50 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 2560 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 9 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 9 LinNumberOfImagePages: 9 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *Mode: 52 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 3200 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 5 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 3200 BnkNumberOfImagePages: 5 LinNumberOfImagePages: 5 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *Mode: 54 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 4096 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 3 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 4096 BnkNumberOfImagePages: 3 LinNumberOfImagePages: 3 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 Mode: 58 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 5a (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 5c (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 60 (768x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 768 XResolution: 768 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 31 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 768 BnkNumberOfImagePages: 31 LinNumberOfImagePages: 31 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 61 (768x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1536 XResolution: 768 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 15 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1536 BnkNumberOfImagePages: 15 LinNumberOfImagePages: 15 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 *Mode: 62 (768x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 3072 XResolution: 768 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 7 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 3072 BnkNumberOfImagePages: 7 LinNumberOfImagePages: 7 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 Mode: 63 (960x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 960 XResolution: 960 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 20 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 960 BnkNumberOfImagePages: 20 LinNumberOfImagePages: 20 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 64 (960x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1920 XResolution: 960 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 9 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1920 BnkNumberOfImagePages: 9 LinNumberOfImagePages: 9 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 *Mode: 65 (960x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 3840 XResolution: 960 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 4 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 3840 BnkNumberOfImagePages: 4 LinNumberOfImagePages: 4 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 Mode: 66 (1280x800) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1280 XResolution: 1280 YResolution: 800 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 11 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 11 LinNumberOfImagePages: 11 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 67 (1280x800) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 2560 XResolution: 1280 YResolution: 800 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 5 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 5 LinNumberOfImagePages: 5 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 *Mode: 68 (1280x800) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 5120 XResolution: 1280 YResolution: 800 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 2 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 5120 BnkNumberOfImagePages: 2 LinNumberOfImagePages: 2 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 Mode: 69 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6a (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6b (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6c (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6d (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6e (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6f (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 70 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 71 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (WW) I810(0): config file hsync range 45.7143-50.5263kHz not within DDC hsync ranges. (II) I810(0): Standardbildschirm: Using hsync range of 45.71-50.53 kHz (II) I810(0): Standardbildschirm: Using vrefresh value of 60.00 Hz (--) I810(0): Virtual size is 1280x800 (pitch 2048) (**) I810(0): *Built-in mode "1280x800" (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) I810(0): [drm] dma control initialized, using IRQ 16 Synaptics DeviceOn called (--) Synaptics Touchpad auto-dev sets device to /dev/input/event10 (**) Option "Device" "/dev/input/event10" (--) Synaptics Touchpad touchpad found (II) Configured Mouse: ps2EnableDataReporting: succeeded (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s Synaptics DeviceOff called (II) AIGLX: Suspending AIGLX clients for VT switch (WW) I810(0): Successfully set original devices (WW) I810(0): Setting the original video mode instead of restoring the saved state (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE 3 method. (II) I810(0): xf86UnbindGARTMemory: unbind key 8 (II) I810(0): xf86UnbindGARTMemory: unbind key 0 (II) I810(0): xf86UnbindGARTMemory: unbind key 1 (II) I810(0): xf86UnbindGARTMemory: unbind key 3 (II) I810(0): xf86UnbindGARTMemory: unbind key 2 (II) I810(0): xf86UnbindGARTMemory: unbind key 4 (II) I810(0): xf86UnbindGARTMemory: unbind key 5 (II) I810(0): xf86UnbindGARTMemory: unbind key 6 (II) I810(0): xf86UnbindGARTMemory: unbind key 7 (WW) I810(0): Successfully set original devices (2) (II) Open ACPI successful (/var/run/acpid.socket) (II) AIGLX: Resuming AIGLX clients after VT switch (II) I810(0): xf86BindGARTMemory: bind key 8 at 0x007bf000 (pgoffset 1983) (II) I810(0): xf86BindGARTMemory: bind key 0 at 0x0ffff000 (pgoffset 65535) (II) I810(0): xf86BindGARTMemory: bind key 1 at 0x0fffb000 (pgoffset 65531) (II) I810(0): xf86BindGARTMemory: bind key 3 at 0x0ffea000 (pgoffset 65514) (II) I810(0): xf86BindGARTMemory: bind key 2 at 0x0fffa000 (pgoffset 65530) (II) I810(0): xf86BindGARTMemory: bind key 4 at 0x0ffe2000 (pgoffset 65506) (II) I810(0): xf86BindGARTMemory: bind key 5 at 0x0f000000 (pgoffset 61440) (II) I810(0): xf86BindGARTMemory: bind key 6 at 0x0e800000 (pgoffset 59392) (II) I810(0): xf86BindGARTMemory: bind key 7 at 0x0c0c0000 (pgoffset 49344) (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/lib/xorg/modules/libddc.so (II) I810(0): VESA VBE DDC supported (II) I810(0): VESA VBE DDC Level 2 (II) I810(0): VESA VBE DDC transfer in appr. 1 sec. (II) I810(0): VESA VBE DDC read successfully (II) I810(0): Manufacturer: LEN Model: 4050 Serial#: 0 (II) I810(0): Year: 2005 Week: 0 (II) I810(0): EDID Version: 1.3 (II) I810(0): Digital Display Input (II) I810(0): Max H-Image Size [cm]: horiz.: 33 vert.: 21 (II) I810(0): Gamma: 2.20 (II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) I810(0): First detailed timing is preferred mode (II) I810(0): redX: 0.569 redY: 0.332 greenX: 0.312 greenY: 0.544 (II) I810(0): blueX: 0.149 blueY: 0.132 whiteX: 0.313 whiteY: 0.329 (II) I810(0): Supported VESA Video Modes: (II) I810(0): 640x480@60Hz (II) I810(0): 800x600@60Hz (II) I810(0): 1024x768@60Hz (II) I810(0): Manufacturer's mask: 0 (II) I810(0): Supported additional Video Mode: (II) I810(0): clock: 71.1 MHz Image Size: 331 x 207 mm (II) I810(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0 (II) I810(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0 (II) I810(0): Supported additional Video Mode: (II) I810(0): clock: 59.3 MHz Image Size: 331 x 207 mm (II) I810(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0 (II) I810(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0 (II) I810(0): LTN154X3-L0A Mode: 30 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 640 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 37 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 640 BnkNumberOfImagePages: 37 LinNumberOfImagePages: 37 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 32 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 832 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 23 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 832 BnkNumberOfImagePages: 23 LinNumberOfImagePages: 23 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 34 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1024 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 15 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1024 BnkNumberOfImagePages: 15 LinNumberOfImagePages: 15 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 38 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 3a (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 3c (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 41 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1280 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 18 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 18 LinNumberOfImagePages: 18 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 43 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1600 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 11 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1600 BnkNumberOfImagePages: 11 LinNumberOfImagePages: 11 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 45 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 2048 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 7 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2048 BnkNumberOfImagePages: 7 LinNumberOfImagePages: 7 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 49 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 4b (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 4d (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 *Mode: 50 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 2560 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 9 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 9 LinNumberOfImagePages: 9 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *Mode: 52 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 3200 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 5 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 3200 BnkNumberOfImagePages: 5 LinNumberOfImagePages: 5 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 *Mode: 54 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 4096 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 3 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 4096 BnkNumberOfImagePages: 3 LinNumberOfImagePages: 3 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 Mode: 58 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 5a (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 5c (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 60 (768x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 768 XResolution: 768 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 31 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 768 BnkNumberOfImagePages: 31 LinNumberOfImagePages: 31 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 61 (768x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1536 XResolution: 768 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 15 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1536 BnkNumberOfImagePages: 15 LinNumberOfImagePages: 15 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 *Mode: 62 (768x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 3072 XResolution: 768 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 7 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 3072 BnkNumberOfImagePages: 7 LinNumberOfImagePages: 7 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 Mode: 63 (960x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 960 XResolution: 960 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 20 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 960 BnkNumberOfImagePages: 20 LinNumberOfImagePages: 20 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 64 (960x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1920 XResolution: 960 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 9 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1920 BnkNumberOfImagePages: 9 LinNumberOfImagePages: 9 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 *Mode: 65 (960x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 3840 XResolution: 960 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 4 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 3840 BnkNumberOfImagePages: 4 LinNumberOfImagePages: 4 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 Mode: 66 (1280x800) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 1280 XResolution: 1280 YResolution: 800 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 11 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 11 LinNumberOfImagePages: 11 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 Mode: 67 (1280x800) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 2560 XResolution: 1280 YResolution: 800 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 5 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 5 LinNumberOfImagePages: 5 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 *Mode: 68 (1280x800) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc00077f3 BytesPerScanline: 5120 XResolution: 1280 YResolution: 800 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 2 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 5120 BnkNumberOfImagePages: 2 LinNumberOfImagePages: 2 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 Mode: 69 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6a (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6b (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6c (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6d (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6e (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 6f (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 70 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 Mode: 71 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (WW) I810(0): config file hsync range 45.7143-50.5263kHz not within DDC hsync ranges. (II) I810(0): Standardbildschirm: Using hsync range of 45.71-50.53 kHz (II) I810(0): Standardbildschirm: Using vrefresh value of 60.00 Hz (--) I810(0): Virtual size is 1280x800 (pitch 2048) (**) I810(0): *Built-in mode "1280x800" (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) I810(0): [drm] dma control initialized, using IRQ 16 Synaptics DeviceOn called (--) Synaptics Touchpad auto-dev sets device to /dev/input/event10 (**) Option "Device" "/dev/input/event10" (--) Synaptics Touchpad touchpad found (II) Configured Mouse: ps2EnableDataReporting: succeeded (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): ACPI Toggle devices 0x1 (II) I810(0): ACPI Toggle to 0x1 (II) I810(0): Hotkey switch to 0x800. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Requested display devices 0x800. (II) I810(0): Toggle (1) 0x1 (II) I810(0): Detected duplicate devices. Toggling (0x1) (II) I810(0): Detected display change operation (0x900, 0x800, 0x1). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now A. (--) I810(0): A non-CRT device is attached to pipe A. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is enabled and connected to Pipe A. (II) I810(0): Display plane B is disabled and connected to Pipe B. (II) I810(0): Enabling plane A. (II) I810(0): Display plane A is now enabled and connected to Pipe A. (II) I810(0): Display plane B is now disabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (1 to 0). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000100 (II) I810(0): Next ACPI _DGS [1] 0x80000410 (II) I810(0): ACPI Toggle devices 0x801 (II) I810(0): ACPI Toggle to 0x801 (II) I810(0): Hotkey switch to 0x1. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected last devices (2). (II) I810(0): Requested display devices 0x1. (II) I810(0): Detected display change operation (0x800, 0x1, 0x900). (II) I810(0): Clearing Clone mode (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Extended BIOS function 0x5f64 failed. (WW) I810(0): Failed to set display devices to 0x900. (WW) I810(0): Enabling LVDS directly. Pipe B. (WW) I810(0): Enabling ADPA directly. Pipe B. (WW) I810(0): Writing config directly to SWF0. (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x80000000 (II) I810(0): PIPEBCONF is 0x00000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s (WW) I810(0): Changing XVideo pipe (0 to 1). (II) PM Event received: Capability Changed I830PMEvent: Capability change (II) I810(0): Next ACPI _DGS [0] 0x80000410 (II) I810(0): ACPI Toggle devices 0x800 (II) I810(0): ACPI Toggle to 0x800 (II) I810(0): Hotkey switch to 0x900. (II) I810(0): Attachable device 0x80000100. (II) I810(0): Attachable device 0x80000240. (II) I810(0): Attachable device 0x80000410. (II) I810(0): Detected cloned pipe mode (B). (II) I810(0): Requested display devices 0x900. (II) I810(0): Toggle (1) 0x800 (II) I810(0): Detected duplicate devices. Toggling (0x800) (II) I810(0): Detected display change operation (0x1, 0x900, 0x800). (II) I810(0): Clearing Clone mode (II) I810(0): Primary pipe is now B. (--) I810(0): A non-CRT device is attached to pipe B. No refresh rate overrides will be attempted. (II) I810(0): Display plane A is disabled and connected to Pipe A. (II) I810(0): Display plane B is enabled and connected to Pipe B. (II) I810(0): Enabling plane B. (II) I810(0): Display plane A is now disabled and connected to Pipe A. (II) I810(0): Display plane B is now enabled and connected to Pipe B. (II) I810(0): PIPEACONF is 0x00000000 (II) I810(0): PIPEBCONF is 0x80000000 (II) I810(0): Mode bandwidth is 61 Mpixel/s (II) I810(0): maxBandwidth is 1152 Mbyte/s, pipe bandwidths are 324 Mbyte/s, 0 Mbyte/s -- System Information: Debian Release: 4.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.24-etchnhalf.1-amd64 Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15) Versions of packages xserver-xorg-video-i810 depends on: ii libc6 2.3.6.ds1-13etch7 GNU C Library: Shared libraries ii xserver-xorg-core 2:1.1.1-21etch5 X.Org X server -- core server xserver-xorg-video-i810 recommends no packages. -- no debconf information
Attachment:
signature.asc
Description: OpenPGP digital signature