Bug#494416: xserver-xorg-video-intel: no other resolution than 640x480 with latest version at X startup
After adding the Modeline statement:
pini:/home/sabine# xrandr --verbose
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 1600 x 1600
VGA connected 1440x900+0+0 (0x4d) normal (normal left inverted right x
axis y axis) 0mm x 0mm
Identifier: 0x4b
Timestamp: 1334425
Subpixel: unknown
Clones:
CRTC: 0
CRTCs: 0 1
1440x900 (0x4d) 106.5MHz -HSync +VSync *current +preferred
h: width 1440 start 1520 end 1672 total 1904 skew 0 clock 55.9KHz
v: height 900 start 901 end 904 total 932 clock 60.0Hz
1600x1024 (0x4e) 106.9MHz -HSync -VSync
h: width 1600 start 1620 end 1640 total 1670 skew 0 clock 64.0KHz
v: height 1024 start 1027 end 1030 total 1067 clock 60.0Hz
1400x1050 (0x4f) 122.0MHz +HSync +VSync
h: width 1400 start 1488 end 1640 total 1880 skew 0 clock 64.9KHz
v: height 1050 start 1052 end 1064 total 1082 clock 60.0Hz
1280x960 (0x50) 108.0MHz +HSync +VSync
h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz
v: height 960 start 961 end 964 total 1000 clock 60.0Hz
1280x800 (0x51) 83.5MHz
h: width 1280 start 1344 end 1480 total 1680 skew 0 clock 49.7KHz
v: height 800 start 801 end 804 total 828 clock 60.0Hz
1152x768 (0x52) 65.0MHz +HSync +VSync
h: width 1152 start 1178 end 1314 total 1472 skew 0 clock 44.2KHz
v: height 768 start 771 end 777 total 806 clock 54.8Hz
800x600 (0x53) 36.0MHz +HSync +VSync
h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz
v: height 600 start 601 end 603 total 625 clock 56.2Hz
640x480 (0x54) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 59.9Hz
LVDS connected 640x480+0+0 (0x55) normal (normal left inverted right x
axis y axis) 0mm x 0mm
Identifier: 0x4c
Timestamp: 1334425
Subpixel: horizontal rgb
Clones:
CRTC: 1
CRTCs: 1
BACKLIGHT_CONTROL: native
supported: native legacy combination kernel
BACKLIGHT: 0 (0x00000000) range: (0,0)
640x480 (0x55) 25.2MHz *current +preferred
h: width 640 start 648 end 744 total 784 skew 0 clock 32.1KHz
v: height 480 start 482 end 484 total 509 clock 63.1Hz
640x480 (0x56) 36.0MHz -HSync -VSync
h: width 640 start 696 end 752 total 832 skew 0 clock 43.3KHz
v: height 480 start 481 end 484 total 509 clock 85.0Hz
640x480 (0x57) 31.5MHz -HSync -VSync
h: width 640 start 664 end 704 total 832 skew 0 clock 37.9KHz
v: height 480 start 489 end 492 total 520 clock 72.8Hz
640x480 (0x58) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0x54) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 59.9Hz
640x400 (0x59) 31.5MHz -HSync +VSync
h: width 640 start 672 end 736 total 832 skew 0 clock 37.9KHz
v: height 400 start 401 end 404 total 445 clock 85.1Hz
640x350 (0x5a) 31.5MHz +HSync -VSync
h: width 640 start 672 end 736 total 832 skew 0 clock 37.9KHz
v: height 350 start 382 end 385 total 445 clock 85.1Hz
pini:/home/sabine#
On Sun, Aug 10, 2008 at 11:50 PM, Oliver Koch <oliver.koch@gmail.com> wrote:
> Adding
> Modeline "1440x900" 106.47 1440 1520 1672 1904 900 901 904 932 -HSync +Vsync
> solved it. I don't know why. Didn't need the modeline since stopped
> using 915resolution, more than 1 year ago.
> I just tried it, bcause my wife is bothering me because of the weird
> resolution of that tft. It is her pc and tft :-(.
>
>
>
> On Sun, Aug 10, 2008 at 11:05 PM, Julien Cristau <jcristau@debian.org> wrote:
>> On Sun, Aug 10, 2008 at 22:20:31 +0200, Oliver Koch wrote:
>>
>>> See below.
>>
>> Thanks.
>>
>>> Obviously the monitor and its resolution is not detected.
>>
>> It does look a bit weird..
>>
>>> (II) intel(0): Found panel mode in BIOS VBT tables:
>>> (II) intel(0): Modeline "640x480"x0.0 25.18 640 648 744 784 480
>>> 482 484 509 (32.1 kHz)
>>
>> the bios claims to use a 640x480 mode for the panel, so that's probably
>> where that's picked up.
>>
>>> (II) intel(0): Mode for pipe A:
>>> (II) intel(0): Modeline "1280x800"x-2.0 83.46 1280 1344 1480 1680
>>> 800 801 804 828 (0.0 kHz)
>>
>> and there's a 1280x800 mode here for the vga.
>> Does xrandr --verbose show an EDID_DATA property for the connected
>> outputs?
>>
>> Cheers,
>> Julien
>>
>
Reply to: