xtrans: Changes to 'debian-experimental'
ChangeLog | 235 +
INSTALL | 236 -
Makefile.in | 554 ----
Xtrans.c | 30
Xtrans.h | 6
Xtransdnet.c | 6
Xtransint.h | 16
Xtranslcl.c | 10
Xtranssock.c | 255 +-
Xtranstli.c | 6
Xtransutil.c | 14
aclocal.m4 | 923 -------
configure | 4607 ---------------------------------------
configure.ac | 5
debian/changelog | 61
debian/control | 13
debian/copyright | 82
debian/rules | 24
debian/xsfbs/xsfbs-autoreconf.mk | 150 -
debian/xsfbs/xsfbs.mk | 168 -
debian/xsfbs/xsfbs.sh | 396 +--
install-sh | 323 --
missing | 360 ---
mkinstalldirs | 158 -
transport.c | 6
xtrans.m4 | 18
26 files changed, 900 insertions(+), 7762 deletions(-)
New commits:
commit 619809dff781e31d76f103e4b09e098ebe73b884
Author: Julien Cristau <jcristau@debian.org>
Date: Sat Jul 19 17:31:31 2008 +0200
update DEB_BUILD_OPTIONS handling
Stop looking for nostrip (we don't build anything anyway);
allow parallel builds using sample code from policy.
diff --git a/debian/changelog b/debian/changelog
index ae88e7e..3417162 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -8,6 +8,8 @@ xtrans (1.2.1-1) UNRELEASED; urgency=low
* New upstream release.
* Switch to running autoreconf at build time. Update debian/rules, and
build-depend on automake and xutils-dev.
+ * Stop looking for nostrip (we don't build anything anyway); allow parallel
+ builds using sample code from policy.
-- Brice Goglin <bgoglin@debian.org> Fri, 13 Jun 2008 11:40:09 +0200
diff --git a/debian/rules b/debian/rules
index 8958bc1..667db7a 100755
--- a/debian/rules
+++ b/debian/rules
@@ -17,8 +17,9 @@ ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
else
CFLAGS += -O2
endif
-ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
- INSTALL_PROGRAM += -s
+ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+ NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+ MAKEFLAGS += -j$(NUMJOBS)
endif
DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
commit 0106583d412aad83d1978135944db3affe3dcaf4
Author: Julien Cristau <jcristau@debian.org>
Date: Sat Jul 19 17:27:14 2008 +0200
Switch to running autoreconf at build time.
Update debian/rules, and build-depend on automake and xutils-dev.
diff --git a/INSTALL b/INSTALL
deleted file mode 100644
index d3c5b40..0000000
--- a/INSTALL
+++ /dev/null
@@ -1,237 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007 Free Software Foundation, Inc.
-
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
-
- Running `configure' might take a while. While running, it prints
- some messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
- 6. Often, you can also type `make uninstall' to remove the installed
- files again.
-
-Compilers and Options
-=====================
-
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about. Run `./configure --help' for
-details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
-Installation Names
-==================
-
-By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc. You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug. Until the bug is fixed you can use this workaround:
-
- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
-`configure' recognizes the following options to control how it operates.
-
-`--help'
-`-h'
- Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
-
diff --git a/Makefile.in b/Makefile.in
deleted file mode 100644
index 321ff1e..0000000
--- a/Makefile.in
+++ /dev/null
@@ -1,567 +0,0 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = .
-DIST_COMMON = README $(Xtransinclude_HEADERS) $(am__configure_deps) \
- $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
- $(srcdir)/xtrans.pc.in $(top_srcdir)/configure AUTHORS COPYING \
- ChangeLog INSTALL NEWS install-sh missing mkinstalldirs
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_CLEAN_FILES = xtrans.pc
-SOURCES =
-DIST_SOURCES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(aclocaldir)" \
- "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(Xtransincludedir)"
-aclocalDATA_INSTALL = $(INSTALL_DATA)
-pkgconfigDATA_INSTALL = $(INSTALL_DATA)
-DATA = $(aclocal_DATA) $(pkgconfig_DATA)
-XtransincludeHEADERS_INSTALL = $(INSTALL_HEADER)
-HEADERS = $(Xtransinclude_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EXEEXT = @EXEEXT@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-fchown_define = @fchown_define@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sticky_bit_define = @sticky_bit_define@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-Xtransincludedir = $(includedir)/X11/Xtrans
-Xtransinclude_HEADERS = \
- Xtrans.h \
- Xtrans.c \
- Xtransdnet.c \
- Xtransint.h \
- Xtranslcl.c \
- Xtransos2.c \
- Xtranssock.c \
- Xtranstli.c \
- Xtransutil.c \
- transport.c
-
-aclocaldir = $(datadir)/aclocal
-aclocal_DATA = xtrans.m4
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = xtrans.pc
-EXTRA_DIST = xtrans.pc.in ${aclocal_DATA}
-CLEANFILES = ChangeLog
-all: all-am
-
-.SUFFIXES:
-am--refresh:
- @:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
- cd $(srcdir) && $(AUTOMAKE) --gnu \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-xtrans.pc: $(top_builddir)/config.status $(srcdir)/xtrans.pc.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-install-aclocalDATA: $(aclocal_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(aclocaldir)" || $(MKDIR_P) "$(DESTDIR)$(aclocaldir)"
- @list='$(aclocal_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(aclocalDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(aclocaldir)/$$f'"; \
- $(aclocalDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(aclocaldir)/$$f"; \
- done
-
-uninstall-aclocalDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(aclocal_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(aclocaldir)/$$f'"; \
- rm -f "$(DESTDIR)$(aclocaldir)/$$f"; \
- done
-install-pkgconfigDATA: $(pkgconfig_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
- @list='$(pkgconfig_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
- $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
- done
-
-uninstall-pkgconfigDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(pkgconfig_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
- rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
- done
-install-XtransincludeHEADERS: $(Xtransinclude_HEADERS)
- @$(NORMAL_INSTALL)
- test -z "$(Xtransincludedir)" || $(MKDIR_P) "$(DESTDIR)$(Xtransincludedir)"
- @list='$(Xtransinclude_HEADERS)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(XtransincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(Xtransincludedir)/$$f'"; \
- $(XtransincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(Xtransincludedir)/$$f"; \
- done
-
-uninstall-XtransincludeHEADERS:
- @$(NORMAL_UNINSTALL)
- @list='$(Xtransinclude_HEADERS)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(Xtransincludedir)/$$f'"; \
- rm -f "$(DESTDIR)$(Xtransincludedir)/$$f"; \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
- END { if (nonempty) { for (i in files) print i; }; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- test -d $(distdir) || mkdir $(distdir)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" distdir="$(distdir)" \
- dist-hook
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-dist-lzma: distdir
- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
- $(am__remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
-
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.lzma*) \
- unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && cd $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA) $(HEADERS)
-installdirs:
- for dir in "$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(Xtransincludedir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
- -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-XtransincludeHEADERS install-aclocalDATA \
- install-pkgconfigDATA
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-XtransincludeHEADERS uninstall-aclocalDATA \
- uninstall-pkgconfigDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
- clean-generic ctags dist dist-all dist-bzip2 dist-gzip \
- dist-hook dist-lzma dist-shar dist-tarZ dist-zip distcheck \
- distclean distclean-generic distclean-tags distcleancheck \
- distdir distuninstallcheck dvi dvi-am html html-am info \
- info-am install install-XtransincludeHEADERS \
- install-aclocalDATA install-am install-data install-data-am \
- install-dvi install-dvi-am install-exec install-exec-am \
- install-html install-html-am install-info install-info-am \
- install-man install-pdf install-pdf-am install-pkgconfigDATA \
- install-ps install-ps-am install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
- pdf-am ps ps-am tags uninstall uninstall-XtransincludeHEADERS \
- uninstall-aclocalDATA uninstall-am uninstall-pkgconfigDATA
-
-
-.PHONY: ChangeLog
-
-ChangeLog:
- (GIT_DIR=$(top_srcdir)/.git git-log > .changelog.tmp && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) || (touch ChangeLog; echo 'git directory not found: installing possibly empty changelog.' >&2)
-
-dist-hook: ChangeLog
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/aclocal.m4 b/aclocal.m4
deleted file mode 100644
index eeb82f5..0000000
--- a/aclocal.m4
+++ /dev/null
@@ -1,959 +0,0 @@
-# generated automatically by aclocal 1.10.1 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
- [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(AC_AUTOCONF_VERSION, [2.61],,
-[m4_warning([this file was generated for autoconf 2.61.
-You have another version of autoconf. It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically `autoreconf'.])])
-
-dnl Copyright 2005 Red Hat, Inc
-dnl
-dnl Permission to use, copy, modify, distribute, and sell this software and its
-dnl documentation for any purpose is hereby granted without fee, provided that
-dnl the above copyright notice appear in all copies and that both that
-dnl copyright notice and this permission notice appear in supporting
-dnl documentation.
-dnl
-dnl The above copyright notice and this permission notice shall be included
-dnl in all copies or substantial portions of the Software.
-dnl
-dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
-dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-dnl IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
-dnl OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-dnl ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-dnl OTHER DEALINGS IN THE SOFTWARE.
-dnl
-dnl Except as contained in this notice, the name of the copyright holders shall
-dnl not be used in advertising or otherwise to promote the sale, use or
-dnl other dealings in this Software without prior written authorization
-dnl from the copyright holders.
-dnl
-
-# XORG_RELEASE_VERSION
-# --------------------
-# Adds --with/without-release-string and changes the PACKAGE and
-# PACKAGE_TARNAME to use "$PACKAGE{_TARNAME}-$RELEASE_VERSION". If
-# no option is given, PACKAGE and PACKAGE_TARNAME are unchanged. Also
-# defines PACKAGE_VERSION_{MAJOR,MINOR,PATCHLEVEL} for modules to use.
-
-AC_DEFUN([XORG_RELEASE_VERSION],[
- AC_ARG_WITH(release-version,
- AC_HELP_STRING([--with-release-version=STRING],
- [Use release version string in package name]),
- [RELEASE_VERSION="$withval"],
- [RELEASE_VERSION=""])
- if test "x$RELEASE_VERSION" != "x"; then
- PACKAGE="$PACKAGE-$RELEASE_VERSION"
- PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
- AC_MSG_NOTICE([Building with package name set to $PACKAGE])
- fi
- AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MAJOR],
- [`echo $PACKAGE_VERSION | cut -d . -f 1`],
- [Major version of this package])
- PVM=`echo $PACKAGE_VERSION | cut -d . -f 2 | cut -d - -f 1`
- if test "x$PVM" = "x"; then
- PVM="0"
- fi
- AC_DEFINE_UNQUOTED([PACKAGE_VERSION_MINOR],
- [$PVM],
- [Minor version of this package])
- PVP=`echo $PACKAGE_VERSION | cut -d . -f 3 | cut -d - -f 1`
- if test "x$PVP" = "x"; then
- PVP="0"
- fi
- AC_DEFINE_UNQUOTED([PACKAGE_VERSION_PATCHLEVEL],
- [$PVP],
- [Patch version of this package])
-])
-
-# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.10'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.10.1], [],
- [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
Reply to: