Bug#443274: marked as done (Xserver 1.4 + RandR 1.2 driver crash in xf86CrtcScreenInit if a second board/driver is added)
Your message dated Fri, 15 Feb 2008 22:33:50 +0100
with message-id <47B6053E.1030403@straka.info>
and subject line not able to test again
has caused the Debian Bug report #443274,
regarding Xserver 1.4 + RandR 1.2 driver crash in xf86CrtcScreenInit if a second board/driver is added
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)
--
443274: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=443274
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Subject: Can'not get any display with Radeon Xpress 200
Package: xorg
Version: 1:7.2-5
Severity: grave
After switching to 7.3+2 X-window became unusable. I have to dual-head
setup with two different graphic cards. One of them is a PCI Matrox
Millenium (2064W) and the other is a Radeon Xpress 200 (onboard). After
the upgrade I could only see a blank screen on Radeon but Matrox had a
normal display. I have also tried a single head display with Radeon but
this didn't help either. I am attaching lspci -nn and xorg.conf
configurations below. I also had to revert back my xorg installation to have usable system. So my package information in this bug report does not show the exact state of the packages when this error occured.
------------------------------------------------------------------------
aldemir@aldemir:~$ lspci -nn
00:00.0 Host bridge [0600]: ATI Technologies Inc Radeon Xpress 200 Host
Bridge [1002:5a33] (rev 01)
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge
[1002:5a3f]
00:19.0 PCI bridge [0604]: ALi Corporation M5249 HTT to PCI Bridge
[10b9:5249]
00:1c.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller
[10b9:5237] (rev 03)
00:1c.1 USB Controller [0c03]: ALi Corporation USB 1.1 Controller
[10b9:5237] (rev 03)
00:1c.2 USB Controller [0c03]: ALi Corporation USB 1.1 Controller
[10b9:5237] (rev 03)
00:1c.3 USB Controller [0c03]: ALi Corporation USB 2.0 Controller
[10b9:5239] (rev 01)
00:1d.0 Audio device [0403]: ALi Corporation High Definition Audio/AC'97
Host Controller [10b9:5461]
00:1e.0 ISA bridge [0601]: ALi Corporation PCI to LPC Controller
[10b9:1573] (rev 31)
00:1e.1 Bridge [0680]: ALi Corporation M7101 Power Management Controller
[PMU] [10b9:7101]
00:1f.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev
c7)
00:1f.1 RAID bus controller [0104]: ALi Corporation ULi 5287 SATA
[10b9:5287] (rev 02)
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410
[Radeon Xpress 200] [1002:5a61]
02:11.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA
2064W [Millennium] [102b:0519] (rev 01)
02:15.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
----------------------------------------------------------------------------
/etc/X11/xorg.conf
Section "Files"
Section "Module"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "ServerFlags"
Option "Xinerama" "true"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" "us"
# Option "XKbOptions" ""
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "Device"
Identifier "Ati"
Option "RenderAccel" "true"
Option "DRI" "true"
#########Option "ShadowFB" "0"
Driver "ati"
BusID "PCI:1:5:0"
EndSection
Section "Device"
Identifier "Matrox"
Option "DRI" "true"
Driver "mga"
BusID "PCI:2:17:0"
EndSection
Section "Monitor"
Identifier "dell"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Monitor"
Identifier "acer"
Option "DPMS"
HorizSync 28-64
VertRefresh 43-60
EndSection
Section "Screen"
Identifier "Screen 1"
Device "Ati"
Monitor "dell"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 2"
Device "Matrox"
Monitor "acer"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen 1" 0 0
Screen 1 "Screen 2" RightOf "Screen 1"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
----------------------------------------------------------------------------
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.22-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages xorg depends on:
ii gnome-terminal [x-ter 2.18.2-1 The GNOME 2 terminal emulator appl
ii libgl1-mesa-glx [libg 7.0.1-2 A free implementation of the OpenG
ii libglu1-mesa 7.0.1-2 The OpenGL utility library (GLU)
ii type-handling [not+sp 0.2.21 dpkg architecture generation scrip
ii xbase-clients 1:7.3+2 miscellaneous X clients - metapack
ii xfonts-100dpi 1:1.0.0-4 100 dpi fonts for X
ii xfonts-75dpi 1:1.0.0-4 75 dpi fonts for X
ii xfonts-base 1:1.0.0-5 standard fonts for X
ii xfonts-scalable 1:1.0.0-6 scalable fonts for X
ii xkb-data 1.0~cvs.20070916-1 X Keyboard Extension (XKB) configu
ii xorg-docs 1:1.4-2 Miscellaneous documentation for th
ii xserver-xorg 1:7.2-5 the X.Org X server
ii xterm [x-terminal-emu 229-1 X terminal emulator
ii xutils 1:7.3+2 X Window System utility programs m
Versions of packages xorg recommends:
ii libgl1-mesa-dri 7.0.1-2 A free implementation of the OpenG
-- no debconf information
___________________________________________________________
Want ideas for reducing your carbon footprint? Visit Yahoo! For Good http://uk.promotions.yahoo.com/forgood/environment.html
--- End Message ---
--- Begin Message ---
Package: xserver-xorg-core
Version: 2:1.3.0.0.dfsg-12
--- Please enter the report below this line. ---
Aldemir is not able to test if this bug still remains. It may be reopened if it appears again.
--
--- End Message ---
Reply to: