On Wed, Apr 25, 2007 at 00:17:37 +0200, Tino Keitel wrote: > after upgrading to 2:2.0.0-1, the Xserver starts with 1280x1024. > > My TFT has 1680x1050, so I set this resolution using the 915resolution > package. The desired resoltion is also listed in 915resolution -l. > 915resolution isn't needed with xf86-video-intel 2.0, because this version doesn't use the bios for modesetting. However, it seems that the driver doesn't detect the correct mode in your case. What kind of machine is that (laptop/desktop/...), and what kind of monitor (laptop panel/vga/dvi/...)? > I disabled DDC in my config because I'll have an out-of-sync screen > otherwise. > > Here are the config and log from the Xserver: Thanks for providing them! > (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, > i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, > E7221 (i915), 915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ, 965GM > (II) Primary Device is: PCI 00:02:0 > (--) Assigning device section with no busID to primary device > (--) Chipset 945GM found [snip] > (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0 > (II) intel(0): Suspected Mac Mini, ignoring the LVDS > (II) intel(0): I2C bus "LVDSDDC_C" removed. > (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. > (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. > (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. > (II) intel(0): Output TMDS-1 has no monitor section > (II) intel(0): SDVO device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz, input 1: Y, input 2: N, output 1: Y, output 2: N > (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. > (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. > (II) intel(0): No SDVO device found on SDVOC > (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. > (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. > (II) intel(0): Output TV has no monitor section > (II) intel(0): Current clock rate multiplier: 8 > (II) intel(0): Output VGA disconnected > (II) intel(0): EDID for output VGA > (II) intel(0): Output TMDS-1 connected > (**) intel(0): Option "ddc" "off" > (II) intel(0): EDID for output TMDS-1 > (**) intel(0): Option "ddc" "off" > (II) intel(0): EDID for output VGA [snip] > (II) intel(0): Not using default mode "1680x1050" (hsync out of range) [snip] > (II) intel(0): Printing probed modes for output TMDS-1 > (II) intel(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 (49.7 kHz) > (II) intel(0): Modeline "1280x768"x60.0 80.14 1280 1344 1480 1680 768 769 772 795 (47.7 kHz) > (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [snip] > (II) intel(0): Output TMDS-1 using initial mode 1280x768 It might be helpful to report this bug upstream at bugs.freedesktop.org, Product "xorg", Component "driver/intel" (make sure to attach your config and log there too). Let us know it you do that. Thanks for your report! Cheers, Julien
Attachment:
signature.asc
Description: Digital signature