compiz-fusion-plugins-main: Changes to 'debian-unstable'
Makefile.in | 753 -
aclocal.m4 | 8290 --------------
config.guess | 1516 --
config.h.in | 101
config.sub | 1626 --
configure |25436 --------------------------------------------
data/Makefile.in | 555
data/filters/Makefile.in | 435
debian/changelog | 10
debian/control | 2
debian/rules | 22
depcomp | 530
include/Makefile.in | 479
install-sh | 323
intltool-extract.in | 861 -
intltool-merge.in | 1451 --
intltool-update.in | 1164 --
ltmain.sh | 6938 ------------
metadata/Makefile.in | 495
missing | 360
mkinstalldirs | 111
po/Makefile.in.in | 2
src/Makefile.in | 555
src/animation/Makefile.in | 600 -
src/colorfilter/Makefile.in | 566
src/expo/Makefile.in | 558
src/ezoom/Makefile.in | 558
src/jpeg/Makefile.in | 562
src/neg/Makefile.in | 558
src/opacify/Makefile.in | 558
src/put/Makefile.in | 558
src/resizeinfo/Makefile.in | 567
src/ring/Makefile.in | 558
src/scaleaddon/Makefile.in | 564
src/shift/Makefile.in | 558
src/snap/Makefile.in | 558
src/text/Makefile.in | 560
src/thumbnail/Makefile.in | 562
src/vpswitch/Makefile.in | 558
src/wall/Makefile.in | 561
src/winrules/Makefile.in | 557
src/workarounds/Makefile.in | 561
42 files changed, 33 insertions(+), 62664 deletions(-)
New commits:
commit 7ab573cd132e5ee6a5c67dd66553926de07d1f85
Author: Sean Finney <seanius@debian.org>
Date: Wed Nov 21 23:16:35 2007 +0100
* Remove autofoo generated content and create/remove it as part of the
standard build process instead.
* FTBFS: add the following to Build-Depends: autoconf, compiz-fusion-bcop,
libgconf2-dev, libglib2.0-dev, libglu1-mesa-dev, libjpeg62-dev, libtool,
libxml2-dev, libxslt1-dev
diff --git a/debian/changelog b/debian/changelog
index f424c03..bc396b2 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,13 @@
+compiz-fusion-plugins-main (0.6.0-3) unstable; urgency=low
+
+ * Remove autofoo generated content and create/remove it as part of the
+ standard build process instead.
+ * FTBFS: add the following to Build-Depends: autoconf, compiz-fusion-bcop,
+ libgconf2-dev, libglib2.0-dev, libglu1-mesa-dev, libjpeg62-dev, libtool,
+ libxml2-dev, libxslt1-dev
+
+ -- Sean Finney <seanius@debian.org> Tue, 20 Nov 2007 20:29:29 +0100
+
compiz-fusion-plugins-main (0.6.0-2) unstable; urgency=low
* make sure the package provides the text.h header file, which is needed
diff --git a/debian/control b/debian/control
index 5667471..5541ddb 100644
--- a/debian/control
+++ b/debian/control
@@ -2,7 +2,7 @@ Source: compiz-fusion-plugins-main
Priority: extra
Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
Uploaders: Sean Finney <seanius@debian.org>
-Build-Depends: debhelper (>= 5), autotools-dev, compiz-dev (>= 0.6.0), intltool, pkg-config, xsltproc
+Build-Depends: autoconf, autotools-dev, compiz-dev (>= 0.6.0), compiz-fusion-bcop, debhelper (>= 5), intltool, libgconf2-dev, libglib2.0-dev, libtool, libglu1-mesa-dev, libjpeg62-dev, libxml2-dev, libxslt1-dev, pkg-config, xsltproc
Standards-Version: 3.7.2
Section: x11
diff --git a/debian/rules b/debian/rules
index 56b999a..dc8496d 100755
--- a/debian/rules
+++ b/debian/rules
@@ -11,10 +11,22 @@ else
CFLAGS += -O2
endif
+# the following files are modified in the build process, but shouldn't be.
+UPSTREAM_PRESERVE:=po/Makefile.in.in
+
+# the following are generated by autoconf and have no way of being deleted
+# gracefully.
+AUTOFOO_DELETE:=aclocal.m4 config.guess config.h.in config.sub configure \
+ depcomp install-sh intltool-extract.in intltool-merge.in \
+ intltool-update.in ltmain.sh missing mkinstalldirs
+
configure: configure-stamp
configure-stamp:
dh_testdir
- chmod +x ./configure ./install-sh
+ for f in $(UPSTREAM_PRESERVE); do \
+ cp -a $$f $$f.preserve; \
+ done
+ ./autogen.sh
./configure --prefix=/usr --disable-static
touch configure-stamp
@@ -29,6 +41,14 @@ clean:
dh_testroot
rm -f build-stamp configure-stamp
[ ! -f Makefile ] || $(MAKE) distclean
+ # clean up extra automake cruft
+ find . -type f -name Makefile.in -print0 | xargs -0 rm -f
+ rm -f $(AUTOFOO_DELETE)
+ for f in $(UPSTREAM_PRESERVE); do \
+ if [ -f $$f.preserve ]; then \
+ cp -a $$f.preserve $$f; rm -f $$f.preserve; \
+ fi; \
+ done
dh_clean
install: build
commit 44117af17650015a25f6ea1e4e8e68b195ebdd65
Author: Sean Finney <seanius@debian.org>
Date: Mon Nov 19 19:15:44 2007 +0100
back out autoconf generated stuff, will now be built in the build process.
diff --git a/Makefile.in b/Makefile.in
deleted file mode 100644
index 9890559..0000000
--- a/Makefile.in
+++ /dev/null
@@ -1,753 +0,0 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in $(srcdir)/compiz-text.pc.in \
- $(srcdir)/config.h.in $(top_srcdir)/configure AUTHORS COPYING \
- ChangeLog INSTALL NEWS TODO config.guess config.sub depcomp \
- install-sh ltmain.sh missing
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = compiz-text.pc
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
- html-recursive info-recursive install-data-recursive \
- install-exec-recursive install-info-recursive \
- install-recursive installcheck-recursive installdirs-recursive \
- pdf-recursive ps-recursive uninstall-info-recursive \
- uninstall-recursive
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
-pkgconfigDATA_INSTALL = $(INSTALL_DATA)
-DATA = $(pkgconfig_DATA)
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
- { test ! -d $(distdir) \
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
- && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-ALL_LINGUAS = @ALL_LINGUAS@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BCOP_BIN = @BCOP_BIN@
-BCOP_CFLAGS = @BCOP_CFLAGS@
-BCOP_LIBS = @BCOP_LIBS@
-CAIRO_CFLAGS = @CAIRO_CFLAGS@
-CAIRO_LIBS = @CAIRO_LIBS@
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-COMPIZ_CFLAGS = @COMPIZ_CFLAGS@
-COMPIZ_LIBS = @COMPIZ_LIBS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GCONFTOOL = @GCONFTOOL@
-GCONF_SCHEMAS_INSTALL_FALSE = @GCONF_SCHEMAS_INSTALL_FALSE@
-GCONF_SCHEMAS_INSTALL_TRUE = @GCONF_SCHEMAS_INSTALL_TRUE@
-GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@
-GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@
-GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
-GL_CFLAGS = @GL_CFLAGS@
-GL_LIBS = @GL_LIBS@
-GMOFILES = @GMOFILES@
-GMSGFMT = @GMSGFMT@
-GREP = @GREP@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-INTLLIBS = @INTLLIBS@
-INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@
-INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@
-INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@
-INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
-INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@
-INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@
-INTLTOOL_MERGE = @INTLTOOL_MERGE@
-INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@
-INTLTOOL_PERL = @INTLTOOL_PERL@
-INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@
-INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@
-INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@
-INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@
-INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@
-INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@
-INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@
-INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@
-INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@
-INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@
-INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
-INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@
-INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@
-INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@
-JPEG_PLUGIN_FALSE = @JPEG_PLUGIN_FALSE@
-JPEG_PLUGIN_TRUE = @JPEG_PLUGIN_TRUE@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
-MAKEINFO = @MAKEINFO@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGFMT_OPTS = @MSGFMT_OPTS@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PANGO_CFLAGS = @PANGO_CFLAGS@
-PANGO_LIBS = @PANGO_LIBS@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POFILES = @POFILES@
-POSUB = @POSUB@
-PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
-PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
-RANLIB = @RANLIB@
-RESIZEINFO_PLUGIN_FALSE = @RESIZEINFO_PLUGIN_FALSE@
-RESIZEINFO_PLUGIN_TRUE = @RESIZEINFO_PLUGIN_TRUE@
-SCALEADDON_PLUGIN_FALSE = @SCALEADDON_PLUGIN_FALSE@
-SCALEADDON_PLUGIN_TRUE = @SCALEADDON_PLUGIN_TRUE@
-SCALE_CFLAGS = @SCALE_CFLAGS@
-SCALE_LIBS = @SCALE_LIBS@
-SCHEMAS_CFLAGS = @SCHEMAS_CFLAGS@
-SCHEMAS_LIBS = @SCHEMAS_LIBS@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-TEXT_PLUGIN_FALSE = @TEXT_PLUGIN_FALSE@
-TEXT_PLUGIN_TRUE = @TEXT_PLUGIN_TRUE@
-USE_NLS = @USE_NLS@
-USE_SCHEMAS_FALSE = @USE_SCHEMAS_FALSE@
-USE_SCHEMAS_TRUE = @USE_SCHEMAS_TRUE@
-VERSION = @VERSION@
-WALL_PLUGIN_FALSE = @WALL_PLUGIN_FALSE@
-WALL_PLUGIN_TRUE = @WALL_PLUGIN_TRUE@
-XGETTEXT = @XGETTEXT@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-compdatadir = @compdatadir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-imagedir = @imagedir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-metadatadir = @metadatadir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-plugindir = @plugindir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-xsltdir = @xsltdir@
-SUBDIRS = metadata src po include data
-EXTRA_DIST = \
- VERSION \
- compiz-text.pc.in \
- intltool-extract.in \
- intltool-merge.in \
- intltool-update.in \
- intltool-extract \
- intltool-merge \
- intltool-update
-
-DISTCLEANFILES = \
- intltool-extract \
- intltool-merge \
- intltool-update \
- po/stamp-it \
- po/.intltool-merge-cache
-
-@TEXT_PLUGIN_TRUE@textdata = compiz-text.pc
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = $(textdata)
-all: config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-am--refresh:
- @:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
- cd $(srcdir) && $(AUTOMAKE) --gnu \
- && exit 0; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- echo ' $(SHELL) ./config.status'; \
- $(SHELL) ./config.status;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
- @if test ! -f $@; then \
- rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
- else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_srcdir) && $(AUTOHEADER)
- rm -f stamp-h1
- touch $@
-
-distclean-hdr:
- -rm -f config.h stamp-h1
-compiz-text.pc: $(top_builddir)/config.status $(srcdir)/compiz-text.pc.in
- cd $(top_builddir) && $(SHELL) ./config.status $@
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-install-pkgconfigDATA: $(pkgconfig_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
- @list='$(pkgconfig_DATA)'; for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
- $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
- done
-
-uninstall-pkgconfigDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(pkgconfig_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
- rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
- done
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-# (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- target=`echo $@ | sed s/-recursive//`; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- dot_seen=yes; \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done; \
- if test "$$dot_seen" = "no"; then \
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
- @failcom='exit 1'; \
- for f in x $$MAKEFLAGS; do \
- case $$f in \
- *=* | --[!k]*);; \
- *k*) failcom='fail=yes';; \
- esac; \
- done; \
- dot_seen=no; \
- case "$@" in \
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
- *) list='$(SUBDIRS)' ;; \
- esac; \
- rev=''; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
- done; \
- rev="$$rev ."; \
- target=`echo $@ | sed s/-recursive//`; \
- for subdir in $$rev; do \
- echo "Making $$target in $$subdir"; \
- if test "$$subdir" = "."; then \
- local_target="$$target-am"; \
- else \
- local_target="$$target"; \
- fi; \
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
- || eval $$failcom; \
- done && test -z "$$fail"
-tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
- done
-ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do \
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
- done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
- include_option=--etags-include; \
- empty_fix=.; \
- else \
- include_option=--include; \
- empty_fix=; \
- fi; \
- list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test ! -f $$subdir/TAGS || \
- tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
- fi; \
- done; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
- test -n "$$unique" || unique=$$empty_fix; \
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
- $$tags $$unique; \
- fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
- tags=; \
- here=`pwd`; \
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
- END { for (i in files) print i; }'`; \
- test -z "$(CTAGS_ARGS)$$tags$$unique" \
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- $$tags $$unique
-
-GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
- $(am__remove_distdir)
- mkdir $(distdir)
- $(mkdir_p) $(distdir)/. $(distdir)/po
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
- if test -d $$d/$$file; then \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
- fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
- else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
- fi; \
- done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = .; then :; else \
- test -d "$(distdir)/$$subdir" \
- || $(mkdir_p) "$(distdir)/$$subdir" \
- || exit 1; \
- distdir=`$(am__cd) $(distdir) && pwd`; \
- top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
- (cd $$subdir && \
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$$top_distdir" \
- distdir="$$distdir/$$subdir" \
- distdir) \
- || exit 1; \
- fi; \
- done
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
- || chmod -R a+r $(distdir)
-dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
-dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
-
-dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
-
-dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
-
-dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration. Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
- case '$(DIST_ARCHIVES)' in \
- *.tar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
- *.tar.bz2*) \
- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
- *.tar.Z*) \
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
- *.shar.gz*) \
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
- *.zip*) \
- unzip $(distdir).zip ;;\
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
- && cd $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
- $(DISTCHECK_CONFIGURE_FLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) \
- && $(MAKE) $(AM_MAKEFLAGS) dvi \
- && $(MAKE) $(AM_MAKEFLAGS) check \
- && $(MAKE) $(AM_MAKEFLAGS) install \
- && $(MAKE) $(AM_MAKEFLAGS) installcheck \
- && $(MAKE) $(AM_MAKEFLAGS) uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
- distuninstallcheck \
- && chmod -R a-w "$$dc_install_base" \
- && ({ \
- (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
- } || { rm -rf "$$dc_destdir"; exit 1; }) \
- && rm -rf "$$dc_destdir" \
- && $(MAKE) $(AM_MAKEFLAGS) dist \
- && rm -rf $(DIST_ARCHIVES) \
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: "; \
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
- @cd $(distuninstallcheck_dir) \
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
- || { echo "ERROR: files left after uninstall:" ; \
- if test -n "$(DESTDIR)"; then \
- echo " (check DESTDIR support)"; \
- fi ; \
- $(distuninstallcheck_listfiles) ; \
- exit 1; } >&2
-distcleancheck: distclean
- @if test '$(srcdir)' = . ; then \
- echo "ERROR: distcleancheck can only run from a VPATH build" ; \
- exit 1 ; \
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
- || { echo "ERROR: files left in build directory after distclean:" ; \
- $(distcleancheck_listfiles) ; \
- exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(DATA) config.h
-installdirs: installdirs-recursive
-installdirs-am:
- for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
- done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr \
- distclean-libtool distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-pkgconfigDATA
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-pkgconfigDATA
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
- check-am clean clean-generic clean-libtool clean-recursive \
- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-shar dist-tarZ dist-zip distcheck distclean \
- distclean-generic distclean-hdr distclean-libtool \
- distclean-recursive distclean-tags distcleancheck distdir \
- distuninstallcheck dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-pkgconfigDATA install-strip installcheck \
- installcheck-am installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic maintainer-clean-recursive \
- mostlyclean mostlyclean-generic mostlyclean-libtool \
- mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
- uninstall uninstall-am uninstall-info-am \
- uninstall-pkgconfigDATA
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/aclocal.m4 b/aclocal.m4
deleted file mode 100644
index 5e9136f..0000000
--- a/aclocal.m4
+++ /dev/null
@@ -1,8290 +0,0 @@
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005 Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-dnl AM_GCONF_SOURCE_2
-dnl Defines GCONF_SCHEMA_CONFIG_SOURCE which is where you should install schemas
-dnl (i.e. pass to gconftool-2
-dnl Defines GCONF_SCHEMA_FILE_DIR which is a filesystem directory where
-dnl you should install foo.schemas files
-dnl
-
-AC_DEFUN([AM_GCONF_SOURCE_2],
-[
- if test "x$GCONF_SCHEMA_INSTALL_SOURCE" = "x"; then
- GCONF_SCHEMA_CONFIG_SOURCE=`gconftool-2 --get-default-source`
- else
- GCONF_SCHEMA_CONFIG_SOURCE=$GCONF_SCHEMA_INSTALL_SOURCE
- fi
-
- AC_ARG_WITH(gconf-source,
- [ --with-gconf-source=sourceaddress Config database for installing schema files.],GCONF_SCHEMA_CONFIG_SOURCE="$withval",)
-
- AC_SUBST(GCONF_SCHEMA_CONFIG_SOURCE)
- AC_MSG_RESULT([Using config source $GCONF_SCHEMA_CONFIG_SOURCE for schema installation])
-
- if test "x$GCONF_SCHEMA_FILE_DIR" = "x"; then
- GCONF_SCHEMA_FILE_DIR='$(sysconfdir)/gconf/schemas'
- fi
-
- AC_ARG_WITH(gconf-schema-file-dir,
- [ --with-gconf-schema-file-dir=dir Directory for installing schema files.],GCONF_SCHEMA_FILE_DIR="$withval",)
-
- AC_SUBST(GCONF_SCHEMA_FILE_DIR)
- AC_MSG_RESULT([Using $GCONF_SCHEMA_FILE_DIR as install directory for schema files])
-
- AC_ARG_ENABLE(schemas-install,
- [ --disable-schemas-install Disable the schemas installation],
- [case ${enableval} in
- yes|no) ;;
- *) AC_MSG_ERROR(bad value ${enableval} for --enable-schemas-install) ;;
- esac])
- AM_CONDITIONAL([GCONF_SCHEMAS_INSTALL], [test "$enable_schemas_install" != no])
-])
-
-# Copyright (C) 1995-2002 Free Software Foundation, Inc.
-# Copyright (C) 2001-2003,2004 Red Hat, Inc.
-#
-# This file is free software, distributed under the terms of the GNU
-# General Public License. As a special exception to the GNU General
-# Public License, this file may be distributed as part of a program
-# that contains a configuration script generated by Autoconf, under
-# the same distribution terms as the rest of that program.
-#
-# This file can be copied and used freely without restrictions. It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-#
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995, 1996
-#
-# Modified to never use included libintl.
-# Owen Taylor <otaylor@redhat.com>, 12/15/1998
-#
-# Major rework to remove unused code
-# Owen Taylor <otaylor@redhat.com>, 12/11/2002
-#
-# Added better handling of ALL_LINGUAS from GNU gettext version
-# written by Bruno Haible, Owen Taylor <otaylor.redhat.com> 5/30/3002
-#
-# Modified to require ngettext
-# Matthias Clasen <mclasen@redhat.com> 08/06/2004
-#
-# We need this here as well, since someone might use autoconf-2.5x
-# to configure GLib then an older version to configure a package
-# using AM_GLIB_GNU_GETTEXT
-AC_PREREQ(2.53)
-
-dnl
-dnl We go to great lengths to make sure that aclocal won't
-dnl try to pull in the installed version of these macros
-dnl when running aclocal in the glib directory.
-dnl
-m4_copy([AC_DEFUN],[glib_DEFUN])
-m4_copy([AC_REQUIRE],[glib_REQUIRE])
-dnl
-dnl At the end, if we're not within glib, we'll define the public
-dnl definitions in terms of our private definitions.
-dnl
-
-# GLIB_LC_MESSAGES
Reply to: