> > screen #0:
> > dimensions: 1280x800 pixels (289x21 millimeters)
> > resolution: 112x968 dots per inch
>
> Well, I think there is something wrong in the X server or in the
> hardware for reporting such a size.
>
> I'm reassigning this bug to the X server, please add to the report the
> reference of your graphics adapter and of your screen.
> Attaching /var/log/Xorg.0.log should also be useful.
Hi,
i googled around a bit, and found this topic:
http://bugs.archlinux.org/task/7129
which may be related. I tried adding the option:
Option "DDC" "no"
to the Device section of my xorg.conf, X started up in 1024x768
(wrong), with 96x96 dpi resolution (correct), and the font were no
more giant (correct). I wasn't able to turn it again to 1280x800, so
by now I disabled DDC option (and got again my giant fonts).
My hardware: I'm using a Toshiba Satellite A100 laptop, graphic card
is an Intel i945, both drivers intel and i810 give the same problem.
Monitor is the laptop's one. Here is my lspci:
00:02.0 VGA compatible controller: Intel Corporation Mobile
945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
(prog-if 00 [VGA])
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0a00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f0b00000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML
Express Integrated Graphics Controller (rev 03)
Subsystem: Toshiba America Info Systems Unknown device ff10
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at f0a80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
I attach an Xorg.0.log as requested, and attach also the output of
xdpyinfo, the Xorg.0.log taken with the <Option "DDC" "no"> (right
resolution but wrong dimensions) and my xorg.conf.
Thanks,
Giacomo
Attachment:
Xorg.0.log_noDDC
Description: Binary data
Attachment:
xdpyinfo_noDDC
Description: Binary data
Attachment:
Xorg.0.log_withDDC
Description: Binary data
Attachment:
xorg.conf
Description: Binary data