Bug#144871: marked as done (xserver-xfree86: [core server] server needs more built-in modes around 60kHz hsync to support iMacs)

To: Julien Cristau <jcristau@debian.org>
Subject: Bug#144871: marked as done (xserver-xfree86: [core server] server needs more built-in modes around 60kHz hsync to support iMacs)
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Wed, 25 Jul 2007 01:30:04 +0000
Message-id: <[🔎] handler.144871.D144871.118532693119778.ackdone@bugs.debian.org>
References: <20070725012849.GD15147@patate.is-a-geek.org> <20020428161306.GA252@iMacBlue.voicetrak.com>

Your message dated Wed, 25 Jul 2007 03:28:49 +0200
with message-id <20070725012849.GD15147@patate.is-a-geek.org>
and subject line Mail delivery failed: returning message to sender
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---

To: submit@bugs.debian.org
Subject: xserver-xfree86: xserver calculations don't work for iMac, debconf default selection unusable
From: "Chris Tillman" <tillman@voicetrak.com>
Date: Sun, 28 Apr 2002 09:13:07 -0700
Message-id: <20020428161306.GA252@iMacBlue.voicetrak.com>

Package: xserver-xfree86
Version: 4.1.0-16

The xserver calculations, at least for my machine, do not provide
usable results.

Although the X software calculates a mode within the ranges, 
and for the given resolution, a black screen is all I get
unless the horizontal sync is around 60.

I went through several different configurations, and I've recorded them
below. If they're not interesting, here are the bottom lines:

1) The usable range for hsync on an iMac is about 59-63 kHz. The 
server calculations limit themselves to be either below this 
range, or don't go up high enough in vsync to compensate.

2) The result is that the normal debconf defaults for Simple
and Medium don't work for an iMac. If I choose a much larger 
monitor than I really have, then a high-resolution mode might
be found accidentally (also outside the defaults offered in 
debconf).

3) I think the real solution is to change the way the xserver does
calculations for the iMac, to make it zero in on hsyncs around 60 kHz.
>From what I've read on the mailing list, this strategy will work for
many older and newer Macs too. 

4) In the short term, I think debconf should always restrict iMacs
to around 59-63 kHz. That will result in an xserver calculation match
at 1024x768 and above. To help with 800x600 and 640x480, #3 will 
have to be addressed.

Here's the story, this setting results in a black screen:

(II) R128(0): iMac 14: Using hsync range of 53.00-72.00 kHz
(II) R128(0): iMac 14: Using vrefresh range of 43.00-85.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using mode "640x480" (no mode of this name)
(--) R128(0): Virtual size is 800x600 (pitch 800)
(**) R128(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) R128(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(==) R128(0): DPI set to (75, 75)


This time, with the horizontal range tightened fro 53 to 59, a non-synced
screen appears (diagonally stretched from bottom left to top right). It's
not black, but not usable.

(II) R128(0): iMac 14: Using hsync range of 59.00-72.00 kHz
(II) R128(0): iMac 14: Using vrefresh range of 43.00-85.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using mode "800x600" (no mode of this name)
(II) R128(0): Not using mode "640x480" (no mode of this name)
(--) R128(0): Virtual size is 1400x1050 (pitch 1408)
(**) R128(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) R128(0): Modeline "1400x1050"  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync
(==) R128(0): DPI set to (75, 75)


With the horizontal sync range tightened even further, a usable visual mode 
is found (1280x960). Note at this point I do NOT have 1280 x 960 chosen
as a possible mode. Here is what I have in the modes section (this is the 
default offered by debconf):

	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"800x600" "640x480"
	EndSubSection


(II) R128(0): iMac 14: Using hsync range of 59.00-61.00 kHz
(II) R128(0): iMac 14: Using vrefresh range of 43.00-85.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using mode "800x600" (no mode of this name)
(II) R128(0): Not using mode "640x480" (no mode of this name)
(--) R128(0): Virtual size is 1280x960 (pitch 1280)
(**) R128(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync
(==) R128(0): DPI set to (75, 75)


If I now relax the horizontal range on the upper end, and add calls for 
1280x960 and 1024x768 in the config, I still get a usable screen at 1280x960:

	SubSection "Display"
		Depth		24
		Modes		"1280x960" "1024x768" "800x600" "640x480"
	EndSubSection
 

(II) R128(0): iMac 14: Using hsync range of 59.00-75.00 kHz
(II) R128(0): iMac 14: Using vrefresh range of 43.00-105.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using mode "800x600" (no mode of this name)
(II) R128(0): Not using mode "640x480" (no mode of this name)
(--) R128(0): Virtual size is 1280x960 (pitch 1280)
(**) R128(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync
(**) R128(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) R128(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync


But notice that the 1024 mode calls for an hsync of 68.7. If I 
take out the 1280x960 config entry, I get a black screen - the
 calculated mode is really not within the capability of the monitor. It 
_really_ wants to be 60 Hz, and won't display if it's anything much 
less or more.

(II) R128(0): iMac 14: Using hsync range of 59.00-75.00 kHz
(II) R128(0): iMac 14: Using vrefresh range of 43.00-105.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using mode "800x600" (no mode of this name)
(II) R128(0): Not using mode "640x480" (no mode of this name)
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
(**) R128(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) R128(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(==) R128(0): DPI set to (75, 75)


Tightening up the range again will allow a usable 1024x768 display:

(II) R128(0): iMac 14: Using hsync range of 59.00-65.00 kHz
(II) R128(0): iMac 14: Using vrefresh range of 43.00-105.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using mode "800x600" (no mode of this name)
(II) R128(0): Not using mode "640x480" (no mode of this name)
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
(**) R128(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) R128(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync


As a result, I have not found a way to make it display 800x600. Keeping
the hsync where it seems to require it, and letting the vsync go 
wherever, while only allowing 800x600 and 640x480 modes, only results
in it going back to 1280x960:

(II) R128(0): iMac 14: Using hsync range of 59.00-61.00 kHz
(II) R128(0): iMac 14: Using vrefresh range of 20.00-200.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using mode "800x600" (no mode of this name)
(II) R128(0): Not using mode "640x480" (no mode of this name)
(--) R128(0): Virtual size is 1280x960 (pitch 1280)
(**) R128(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) R128(0): Modeline "1280x960"  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync


I think some people such as visually impaired people may want the display
to be able to go to 800 x 600. I think it's the server's calculation capability
that's stopping it from being able to do it. The server thinks that those
lower resolutions must be obtained with lower hsync's, and won't consider 60, 
while the Mac insists that 60 kHz is all it knows.

If I let the hsync range go way down, I get calculated modes but it's no 
good: the mac gets a black screen, the server thinks everything's cool.

(II) R128(0): iMac 14: Using hsync range of 29.00-61.00 kHz
(II) R128(0): iMac 14: Using vrefresh range of 20.00-200.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(--) R128(0): Virtual size is 800x600 (pitch 800)
(**) R128(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) R128(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) R128(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) R128(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync


Now to really get to the point. The default values chosen in the debconf
interface for novice users just don't work on Macs. A black screen is the
result of choosing Simple, up to 14":

(II) R128(0): iMac 14: Using hsync range of 28.00-33.00 kHz
(II) R128(0): iMac 14: Using vrefresh range of 43.00-72.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using mode "1024x768" (no mode of this name)
(II) R128(0): Not using mode "800x600" (no mode of this name)
(--) R128(0): Virtual size is 640x480 (pitch 640)
(**) R128(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) R128(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync



Choosing 17" Simple (btw, this screen is 15") gives me 3 calculated
modes, but none which actually work (black screen, none are close to
60kHz hsync). Here it appears to be trying to stay around 85 Hz vsync,
but that's just not a good approach for the iMac.

(II) R128(0): iMac 14: Using hsync range of 30.00-70.00 kHz
(II) R128(0): iMac 14: Using vrefresh range of 50.00-160.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
(**) R128(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) R128(0): Modeline "1024x768"   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync
(**) R128(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) R128(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) R128(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) R128(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync


To get a visible screen, I can tighten up the hsync. But with that, the
xserver gives up on the lower resolutions.

(II) R128(0): iMac 14: Using hsync range of 59.00-61.00 kHz
(II) R128(0): iMac 14: Using vrefresh range of 50.00-160.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "640x350" (hsync out of range)
(II) R128(0): Not using default mode "640x400" (hsync out of range)
(II) R128(0): Not using default mode "720x400" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "640x480" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "800x600" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1024x768" (hsync out of range)
(II) R128(0): Not using default mode "1152x864" (hsync out of range)
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(II) R128(0): Not using mode "800x600" (no mode of this name)
(II) R128(0): Not using mode "640x480" (no mode of this name)
(--) R128(0): Virtual size is 1024x768 (pitch 1024)
(**) R128(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) R128(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync


I finally got 800x600 to work with this modeline:

(**) R128(0): Mode "800x600": 70.0 MHz, 66.8 kHz, 105.9 Hz
(II) R128(0): Modeline "800x600"   70.00  800 832 896 1048  600 601 604 631 +hsync +vsync

(II) R128(0): iMac 14: Using hsync range of 20.00-75.00 kHz
(II) R128(0): iMac 14: Using vrefresh range of 50.00-160.00 Hz

However it was very dark, and a little off center horizontally.

This modeline was pretty nice:
(**) R128(0): Mode "800x600": 66.0 MHz, 63.0 kHz, 99.8 Hz
(II) R128(0): Modeline "800x600"   66.00  800 832 896 1048  600 601 604 631 +hsync +vsync

This one was right on (hey, 60 kHz!)
(**) R128(0): Mode "800x600": 63.0 MHz, 60.1 kHz, 95.3 Hz
(II) R128(0): Modeline "800x600"   63.00  800 832 896 1048  600 601 604 631 +hsync +vsync

This one worked but was a little skinny in the vertical axis:
(**) R128(0): Mode "800x600": 62.0 MHz, 59.2 kHz, 93.8 Hz
(II) R128(0): Modeline "800x600"   62.00  800 832 896 1048  600 601 604 631 +hsync +vsync

A little activity here, not usable:
(**) R128(0): Mode "800x600": 61.0 MHz, 58.2 kHz, 92.2 Hz
(II) R128(0): Modeline "800x600"   61.00  800 832 896 1048  600 601 604 631 +hsync +vsync

Black screen for these:
(**) R128(0): Mode "800x600": 55.0 MHz, 52.5 kHz, 83.2 Hz
(II) R128(0): Modeline "800x600"   55.00  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) R128(0): Mode "800x600": 60.0 MHz, 54.4 kHz, 86.2 Hz
(II) R128(0): Modeline "800x600"   60.00  800 832 896 1048  600 601 604 631 +hsync +vsync

So the usable range for hsync is really about 59-63 kHz, and the
calculated modes need to go up to 93-100 Hz vsync in order to make that
happen for 800 x 600.










### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
#   dpkg-reconfigure xserver-xfree86
# as root.  Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"
	Load	"xie"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"macintosh"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"Rage 128"
	Driver		"ati"
	BusID		"PCI:00:16:00"
	Option		"UseFBDev"		"true"
EndSection

Section "Monitor"
	Identifier	"iMac 14"
	HorizSync	20-75
	VertRefresh	50-160
	Option		"DPMS"
	Modeline 	"800x600"   62.00  800 832 896 1048  600 601 604 631 +hsync +vsync
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Rage 128"
	Monitor		"iMac 14"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

### END DEBCONF SECTION


This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.18-powerpc-smp ppc [ELF] 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Apr 27 22:26:14 2002
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "iMac 14"
(**) |   |-->Device "Rage 128"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "macintosh"
(**) XKB: model: "macintosh"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7

(WW) Cannot open APM
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.1
	XFree86 Video Driver: 0.4
	XFree86 XInput driver : 0.2
	XFree86 Server Extension : 0.1
	XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.4
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,0020 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:10:0: chip 1002,524c card 1002,524c rev 00 class 03,80,00 hdr 00
(II) PCI: 01:0b:0: chip 106b,001f card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 01:17:0: chip 106b,0022 card 0000,0000 rev 02 class ff,00,00 hdr 00
(II) PCI: 01:18:0: chip 106b,0019 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 01:19:0: chip 106b,0019 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 02:0b:0: chip 106b,001e card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 02:0f:0: chip 106b,0021 card 0000,0000 rev 00 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) Host-to-PCI bridge:
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1 0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1 0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1 0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:0:0), (-1,1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1 0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1 0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1 0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 2: bridge is at (0:0:0), (-1,2,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 2 I/O range:
	[0] -1 0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 2 non-prefetchable memory range:
	[0] -1 0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 2 prefetchable memory range:
	[0] -1 0	0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI: (0:16:0) ATI Rage 128 RL rev 0, Mem @ 0x94000000/26, 0x90000000/14, I/O @ 0x0400/8, BIOS @ 0x90020000/17
(II) Addressable bus resource ranges are
	[0] -1 0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1 0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1 0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1 0	0x00000000 - 0x00000000 (0x1) MX[B]
	[2] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[3] -1 0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) Active PCI resource ranges:
	[0] -1 0	0xf5200000 - 0xf53fffff (0x200000) MX[B]
	[1] -1 0	0x80080000 - 0x80080fff (0x1000) MX[B]
	[2] -1 0	0x80081000 - 0x80081fff (0x1000) MX[B]
	[3] -1 0	0x80000000 - 0x8007ffff (0x80000) MX[B]
	[4] -1 0	0x90020000 - 0x9003ffff (0x20000) MX[B](B)
	[5] -1 0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[6] -1 0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[7] -1 0	0x00000400 - 0x000004ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1 0	0xf5200000 - 0xf53fffff (0x200000) MX[B]
	[1] -1 0	0x80080000 - 0x80080fff (0x1000) MX[B]
	[2] -1 0	0x80081000 - 0x80081fff (0x1000) MX[B]
	[3] -1 0	0x80000000 - 0x8007ffff (0x80000) MX[B]
	[4] -1 0	0x90020000 - 0x9003ffff (0x20000) MX[B](B)
	[5] -1 0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[6] -1 0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[7] -1 0	0x00000400 - 0x000004ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1 0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1 0	0x00000000 - 0x00000000 (0x1) MX[B]
	[2] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[3] -1 0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) All system resource ranges:
	[0] -1 0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1 0	0x00000000 - 0x00000000 (0x1) MX[B]
	[2] -1 0	0xf5200000 - 0xf53fffff (0x200000) MX[B]
	[3] -1 0	0x80080000 - 0x80080fff (0x1000) MX[B]
	[4] -1 0	0x80081000 - 0x80081fff (0x1000) MX[B]
	[5] -1 0	0x80000000 - 0x8007ffff (0x80000) MX[B]
	[6] -1 0	0x90020000 - 0x9003ffff (0x20000) MX[B](B)
	[7] -1 0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[8] -1 0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[9] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[10] -1 0	0x00000000 - 0x00000000 (0x1) IX[B]
	[11] -1 0	0x00000400 - 0x000004ff (0x100) IX[B](B)
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.1.9
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.13.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 6.3.6
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.2
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
	ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
	ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
	ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI),
	ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI),
	ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
	ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE (AGP)
(II) ATI:  Candidate "Device" section "Rage 128".
(--) Chipset ATI Rage 128 RL (AGP) found
(II) Loading sub module "r128"
(II) LoadModule: "r128"
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 4.0.1
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.4
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1 0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1 0	0x00000000 - 0x00000000 (0x1) MX[B]
	[2] -1 0	0xf5200000 - 0xf53fffff (0x200000) MX[B]
	[3] -1 0	0x80080000 - 0x80080fff (0x1000) MX[B]
	[4] -1 0	0x80081000 - 0x80081fff (0x1000) MX[B]
	[5] -1 0	0x80000000 - 0x8007ffff (0x80000) MX[B]
	[6] -1 0	0x90020000 - 0x9003ffff (0x20000) MX[B](B)
	[7] -1 0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[8] -1 0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[9] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[10] -1 0	0x00000000 - 0x00000000 (0x1) IX[B]
	[11] -1 0	0x00000400 - 0x000004ff (0x100) IX[B](B)
(II) resource ranges after probing:
	[0] -1 0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1 0	0x00000000 - 0x00000000 (0x1) MX[B]
	[2] -1 0	0xf5200000 - 0xf53fffff (0x200000) MX[B]
	[3] -1 0	0x80080000 - 0x80080fff (0x1000) MX[B]
	[4] -1 0	0x80081000 - 0x80081fff (0x1000) MX[B]
	[5] -1 0	0x80000000 - 0x8007ffff (0x80000) MX[B]
	[6] -1 0	0x90020000 - 0x9003ffff (0x20000) MX[B](B)
	[7] -1 0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[8] -1 0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[9] 0 0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[10] 0 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[11] 0 0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[12] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[13] -1 0	0x00000000 - 0x00000000 (0x1) IX[B]
	[14] -1 0	0x00000400 - 0x000004ff (0x100) IX[B](B)
	[15] 0 0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[16] 0 0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.4
(II) R128(0): PCI bus 0 card 16 func 0
(**) R128(0): Depth 24, (--) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
(**) R128(0): Option "UseFBDev" "true"
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(**) R128(0): Using framebuffer device
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.0.2
	ABI class: XFree86 Video Driver, version 0.4
(--) R128(0): Chipset: "ATI Rage 128 RL (AGP)" (ChipID = 0x524c)
(--) R128(0): Linear framebuffer at 0x94000000
(--) R128(0): MMIO registers at 0x90000000
(--) R128(0): BIOS at 0x90020000
(--) R128(0): VideoRAM: 8192 kByte (64-bit SDR SGRAM 2:1)
(WW) R128(0): Video BIOS not detected in PCI space!
(WW) R128(0): Attempting to read Video BIOS from legacy ISA space!
(WW) R128(0): Video BIOS not found!
(II) R128(0): PLL parameters: rf=2950 rd=26 min=12500 max=25000; xclk=5010
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): iMac 14: Using hsync range of 20.00-75.00 kHz
(II) R128(0): iMac 14: Using vrefresh range of 50.00-160.00 Hz
(II) R128(0): Clock range:  12.50 to 250.00 MHz
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(--) R128(0): Virtual size is 800x600 (pitch 800)
(**) R128(0): Mode "800x600": 62.0 MHz, 59.2 kHz, 93.8 Hz
(II) R128(0): Modeline "800x600"   62.00  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) R128(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) R128(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(==) R128(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.1.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.4
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0 0	0x90000000 - 0x90003fff (0x4000) MS[B]
	[1] 0 0	0x94000000 - 0x97ffffff (0x4000000) MS[B]
	[2] -1 0	0xffffffff - 0xffffffff (0x1) MX[B]
	[3] -1 0	0x00000000 - 0x00000000 (0x1) MX[B]
	[4] -1 0	0xf5200000 - 0xf53fffff (0x200000) MX[B]
	[5] -1 0	0x80080000 - 0x80080fff (0x1000) MX[B]
	[6] -1 0	0x80081000 - 0x80081fff (0x1000) MX[B]
	[7] -1 0	0x80000000 - 0x8007ffff (0x80000) MX[B]
	[8] -1 0	0x90020000 - 0x9003ffff (0x20000) MX[B](B)
	[9] -1 0	0x90000000 - 0x90003fff (0x4000) MX[B](B)
	[10] -1 0	0x94000000 - 0x97ffffff (0x4000000) MX[B](B)
	[11] 0 0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[12] 0 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[13] 0 0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[14] 0 0	0x00000400 - 0x000004ff (0x100) IS[B]
	[15] -1 0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1 0	0x00000000 - 0x00000000 (0x1) IX[B]
	[17] -1 0	0x00000400 - 0x000004ff (0x100) IX[B](B)
	[18] 0 0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[19] 0 0	0x000003c0 - 0x000003df (0x20) IS[B]
[drm] failed to load kernel module "r128"
(II) R128(0): [drm] drmOpen failed
(EE) R128(0): [dri] DRIScreenInit failed.  Disabling DRI.
(II) R128(0): Memory manager initialized to (0,0) (800,2621)
(II) R128(0): Reserved area from (0,600) to (800,602)
(II) R128(0): Largest offscreen area available: 800 x 2019
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Dashed Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		14 256x256 slots
(II) R128(0): Acceleration enabled
(II) R128(0): Using hardware cursor (scanline 2408)
(II) R128(0): Largest offscreen area available: 800 x 2016
(**) Option "dpms"
(**) R128(0): DPMS enabled
(II) R128(0): Direct rendering disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Configured Mouse: Buttons: 3
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
Could not init font path element unix/:7100, removing from list!

-rw-r--r--    1 root     root        21285 Apr 27 22:26 /var/log/XFree86.0.log
-rw-r--r--    1 root     root        53304 Apr 27 21:21 /var/log/XFree86.8.log



-- System Information
Debian Release: 3.0
Architecture: powerpc
Kernel: Linux voicetrak.com 2.4.16-newpmac #1 Mon Jan 7 20:51:25 EST 2002 ppc
Locale: LANG=C, LC_CTYPE=C

Versions of packages xserver-xfree86 depends on:
ii  debconf                       1.0.32     Debian configuration management sy
ii  libc6                         2.2.5-4    GNU C Library: Shared libraries an
ii  xserver-common                4.1.0-16   files and utilities common to all 
ii  zlib1g                        1:1.1.4-1  compression library - runtime

--- End Message ---

--- Begin Message ---

To: 144871-done@bugs.debian.org

Subject: Re: Mail delivery failed: returning message to sender

From: Julien Cristau <jcristau@debian.org>

Date: Wed, 25 Jul 2007 03:28:49 +0200

Message-id: <20070725012849.GD15147@patate.is-a-geek.org>

In-reply-to: <E1IDVcH-0000kO-UO@master.debian.org>

References: <E1IDVcH-0000kO-UO@master.debian.org>
On Wed, Jul 25, 2007 at 01:24:41 +0000, Mail Delivery System wrote:

> This message was created automatically by mail delivery software.
> 
> A message that you sent could not be delivered to one or more of its
> recipients. This is a permanent error. The following address(es) failed:
> 
>   tillman@voicetrak.com
>     all relevant MX records point to non-existent hosts
> 
Closing.

Cheers,
Julien
Attachment: signature.asc
Description: Digital signature

--- End Message ---

Reply to:

Prev by Date: Bug#144871: xserver-xfree86: xserver calculations don't work for iMac, debconf default selection unusable
Next by Date: Processed: Re: Bug#144871: xserver-xfree86: xserver calculations don't work for iMac, debconf default selection unusable
Previous by thread: Processed: Re: Bug#144871: xserver-xfree86: xserver calculations don't work for iMac, debconf default selection unusable
Next by thread: Bug#164034: reassign 164034 to xserver-xorg
Index(es):
- Date
- Thread