[ Just to make things clear: The machine which is having the trouble ] [ is Marinas computer, I'm just helping her with the debugging. ] Am Sat, 23. Jun 2007, 00:17:33 +0200 schrieb Brice Goglin: > A couple months ago, you reported a bug to the Debian BTS regarding the > Xorg server sometimes failing to start. Did you reproduce this problem > recently? With Xorg/Etch? With latest xserver-xorg-core and > xserver-xorg-video-intel driver? I recompiled xorg-server and xserver-xorg-video-intel from testing for etch and we tried that. Now a different problem occurs: The X server is unable to allocate video memory (logs attached). These are the packages I had to recompile: libdrm 2.3.0-4 mesa 6.5.2-5 x11proto-damage 1.1.0-2 x11proto-randr 1.2.1-2 xorg-server 1.3.0.0.dfsg-6 xserver-xorg-video-intel 2.0.0-1 The recompiled versions are available from http://www.jorrit.de/debian/pool/main/ This was done on the amd64 kernel from etch: Linux version 2.6.18-4-amd64 (Debian 2.6.18.dfsg.1-12etch2) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Thu May 10 01:01:58 UTC 2007 With the 686 from etch the same symptoms occur (X dies on start), but I didn't have time to check the logs to see if it's really the same. There is an unrelated additional problem with the 686 kernel which is quite unhelpful for debugging: after a short while, the network stops working, which is why we used the amd64 kernel in the first place. I saw the problem with memory allocation with the intel driver on a laptop as well, even when I fully upgraded to lenny about two weeks ago. We solved the problem by switching from lennys amd64 kernel to lennys 686 kernel. I believe the graphics chip on that laptop was something like 965GM. These are the most important looking portions of the logs (the log are attached in full): ========================= Xorg.log.0 ====================== (WW) xf86AcquireGART: AGPIOC_ACQUIRE failed (Invalid argument) (EE) GARTInit: AGPIOC_INFO failed (Invalid argument) (WW) intel(0): /dev/agpgart is either not available, or no memory is available for allocation. Using pre-allocated memory only. (==) intel(0): VideoRam: 7932 KB (II) intel(0): Attempting memory allocation with tiled buffers and large DRI memory manager reservation: (WW) intel(0): Disabling HW cursor because the cursor memory allocation failed. (WW) intel(0): Failed to allocate Overlay register space. (II) intel(0): Allocating 6780 scanlines for pixmap cache (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (II) intel(0): Attempting memory allocation with tiled buffers and small DRI memory manager reservation: (WW) intel(0): Failed to allocate Overlay register space. (II) intel(0): Allocating 6780 scanlines for pixmap cache (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (II) intel(0): Attempting memory allocation with untiled buffers and large DRI memory manager reservation: (WW) intel(0): Failed to allocate Overlay register space. (II) intel(0): Allocating 6848 scanlines for pixmap cache (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (II) intel(0): Attempting memory allocation with untiled buffers and small DRI memory manager reservation: (WW) intel(0): Failed to allocate Overlay register space. (II) intel(0): Allocating 6848 scanlines for pixmap cache (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (WW) intel(0): Not enough video memory. Disabling DRI. (WW) intel(0): Failed to allocate Overlay register space. (II) intel(0): Allocating 6848 scanlines for pixmap cache (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (EE) intel(0): Couldn't allocate video memory ========================= Xorg.log.0 ====================== =========================== dmesg ========================= ioctl32(Xorg:3360): Unknown cmd fd(7) cmd(00004101){00} arg(00000000) on /dev/agpgart ioctl32(Xorg:3360): Unknown cmd fd(7) cmd(80044100){00} arg(ffb2a9c0) on /dev/agpgart eth0: no IPv6 routers present ioctl32(Xorg:3518): Unknown cmd fd(7) cmd(00004101){00} arg(00000000) on /dev/agpgart ioctl32(Xorg:3518): Unknown cmd fd(7) cmd(80044100){00} arg(ff86c250) on /dev/agpgart ioctl32(Xorg:3528): Unknown cmd fd(7) cmd(00004101){00} arg(00000000) on /dev/agpgart ioctl32(Xorg:3528): Unknown cmd fd(7) cmd(80044100){00} arg(ff9b6390) on /dev/agpgart =========================== dmesg ========================= Thanks for your work, Jö. -- <ex-bart> beleidige cernlib -:- SignOff Volk1: #macht (EOF From client)
X Window System Version 1.3.0 Release Date: 19 April 2007 X Protocol Version 11, Revision 0, Release 1.3 Build Operating System: Linux Debian Current Operating System: Linux venus 2.6.18-4-amd64 #1 SMP Thu May 10 01:01:58 UTC 2007 x86_64 Build Date: 07 July 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 18 21:05:05 2007 (==) Using config file: "/etc/X11/xorg.conf" (II) Module already built-in (II) Module already built-in (II) Module already built-in (II) Module already built-in (EE) GARTInit: AGPIOC_INFO failed (Invalid argument) (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (EE) intel(0): Couldn't allocate video memory Fatal server error: AddScreen/ScreenInit failed for driver 0
X Window System Version 1.3.0 Release Date: 19 April 2007 X Protocol Version 11, Revision 0, Release 1.3 Build Operating System: Linux Debian Current Operating System: Linux venus 2.6.18-4-amd64 #1 SMP Thu May 10 01:01:58 UTC 2007 x86_64 Build Date: 07 July 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 18 21:05:05 2007 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Standardbildschirm" (**) | |-->Device "Intel Corporation 82945G/GZ Integrated Graphics Controller" (**) |-->Input Device "Generic Keyboard" (**) |-->Input Device "Configured Mouse" (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/misc". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/misc"). (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/cyrillic". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/cyrillic"). (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi/"). (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/75dpi/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi/"). (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/Type1". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/Type1"). (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/100dpi". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/100dpi"). (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/75dpi". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/75dpi"). (WW) Including the default font path /usr/share/fonts/X11/misc,/usr/share/fonts/X11/cyrillic,/usr/share/fonts/X11/100dpi/:unscaled,/usr/share/fonts/X11/75dpi/:unscaled,/usr/share/fonts/X11/Type1,/usr/share/fonts/X11/100dpi,/usr/share/fonts/X11/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType. (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/cyrillic, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/cyrillic, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType (==) RgbPath set to "/etc/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x81e0e40 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.2 X.Org XInput driver : 0.7 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.2 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2770 card 1849,2770 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2772 card 1849,2772 rev 02 class 03,00,00 hdr 00 (II) PCI: 00:1b:0: chip 8086,27d8 card 1849,0888 rev 01 class 04,03,00 hdr 00 (II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 01 class 06,04,00 hdr 81 (II) PCI: 00:1c:1: chip 8086,27d2 card 0000,0000 rev 01 class 06,04,00 hdr 81 (II) PCI: 00:1d:0: chip 8086,27c8 card 1849,27c8 rev 01 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,27c9 card 1849,27c9 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,27ca card 1849,27ca rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:3: chip 8086,27cb card 1849,27cb rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,27cc card 1849,27cc rev 01 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev e1 class 06,04,01 hdr 01 (II) PCI: 00:1f:0: chip 8086,27b8 card 1849,27b8 rev 01 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,27df card 1849,27df rev 01 class 01,01,8a hdr 00 (II) PCI: 00:1f:2: chip 8086,27c0 card 1849,27c0 rev 01 class 01,01,8f hdr 00 (II) PCI: 00:1f:3: chip 8086,27da card 1849,27da rev 01 class 0c,05,00 hdr 00 (II) PCI: 01:00:0: chip 10ec,8168 card 1849,8168 rev 01 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 2 prefetchable memory range: [0] -1 0 0xfdf00000 - 0xfdffffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:28:1), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xfeb00000 - 0xfebfffff (0x100000) MX[B] (II) Subtractive PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared) (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:2:0) Intel Corporation 82945G/GZ Integrated Graphics Controller rev 2, Mem @ 0xfea80000/19, 0xd0000000/28, 0xfea40000/18, I/O @ 0xdc00/3 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[B] [1] -1 0 0xfea37c00 - 0xfea37fff (0x400) MX[B] [2] -1 0 0xfea38000 - 0xfea3bfff (0x4000) MX[B] [3] -1 0 0xfea40000 - 0xfea7ffff (0x40000) MX[B](B) [4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [5] -1 0 0xfea80000 - 0xfeafffff (0x80000) MX[B](B) [6] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [7] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [8] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B] [9] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[B] [10] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B] [11] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[B] [12] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[B] [13] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [14] -1 0 0x000008f8 - 0x000008f8 (0x1) IX[B] [15] -1 0 0x000008f0 - 0x000008f0 (0x1) IX[B] [16] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[B] [17] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] [18] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[B] [19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [20] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[B] [1] -1 0 0xfea37c00 - 0xfea37fff (0x400) MX[B] [2] -1 0 0xfea38000 - 0xfea3bfff (0x4000) MX[B] [3] -1 0 0xfea40000 - 0xfea7ffff (0x40000) MX[B](B) [4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [5] -1 0 0xfea80000 - 0xfeafffff (0x80000) MX[B](B) [6] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [7] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [8] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B] [9] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[B] [10] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B] [11] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[B] [12] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[B] [13] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [14] -1 0 0x000008f8 - 0x000008f8 (0x1) IX[B] [15] -1 0 0x000008f0 - 0x000008f0 (0x1) IX[B] [16] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[B] [17] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] [18] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[B] [19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [20] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[B] [5] -1 0 0xfea37c00 - 0xfea37fff (0x400) MX[B] [6] -1 0 0xfea38000 - 0xfea3bfff (0x4000) MX[B] [7] -1 0 0xfea40000 - 0xfea7ffff (0x40000) MX[B](B) [8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [9] -1 0 0xfea80000 - 0xfeafffff (0x80000) MX[B](B) [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [13] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [14] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B] [15] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[B] [16] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B] [17] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[B] [18] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[B] [19] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [20] -1 0 0x000008f8 - 0x000008f8 (0x1) IX[B] [21] -1 0 0x000008f0 - 0x000008f0 (0x1) IX[B] [22] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[B] [23] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] [24] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[B] [25] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [26] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B](B) (II) LoadModule: "dbe" (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "ddc"(II) Module already built-in (II) LoadModule: "dri" (II) Loading /usr/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "extmod" (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "freetype" (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.3.0, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "int10" (II) Loading /usr/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.2 (II) LoadModule: "record" (II) Loading /usr/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "vbe" (II) Loading /usr/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.1.0 ABI class: X.Org Video Driver, version 1.2 (II) LoadModule: "type1" (II) Loading /usr/lib/xorg/modules//fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "intel" (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.3.0, module version = 2.0.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 1.2 (II) LoadModule: "kbd" (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ, 965GM (II) Primary Device is: PCI 00:02:0 (--) Chipset 945G found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[B] [5] -1 0 0xfea37c00 - 0xfea37fff (0x400) MX[B] [6] -1 0 0xfea38000 - 0xfea3bfff (0x4000) MX[B] [7] -1 0 0xfea40000 - 0xfea7ffff (0x40000) MX[B](B) [8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [9] -1 0 0xfea80000 - 0xfeafffff (0x80000) MX[B](B) [10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [13] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [14] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B] [15] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[B] [16] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B] [17] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[B] [18] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[B] [19] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [20] -1 0 0x000008f8 - 0x000008f8 (0x1) IX[B] [21] -1 0 0x000008f0 - 0x000008f0 (0x1) IX[B] [22] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[B] [23] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] [24] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[B] [25] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [26] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[B] [5] -1 0 0xfea37c00 - 0xfea37fff (0x400) MX[B] [6] -1 0 0xfea38000 - 0xfea3bfff (0x4000) MX[B] [7] -1 0 0xfea40000 - 0xfea7ffff (0x40000) MX[B](B) [8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [9] -1 0 0xfea80000 - 0xfeafffff (0x80000) MX[B](B) [10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [16] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [17] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B] [18] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[B] [19] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B] [20] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[B] [21] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[B] [22] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [23] -1 0 0x000008f8 - 0x000008f8 (0x1) IX[B] [24] -1 0 0x000008f0 - 0x000008f0 (0x1) IX[B] [25] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[B] [26] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] [27] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[B] [28] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [29] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B](B) [30] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [31] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/lib/xorg/modules//libint10.so (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Reloading /usr/lib/xorg/modules//libvbe.so (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.3.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.2 (**) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 945G (--) intel(0): Chipset: "945G" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xFEA80000 (II) intel(0): 2 display pipes available. (==) intel(0): Using XAA for acceleration (--) intel(0): Will try to allocate texture pool for old Mesa 3D driver. (II) intel(0): Will try to reserve 32768 kiB of AGP aperture space for the DRM memory manager. (II) Loading sub module "ddc" (II) LoadModule: "ddc"(II) Module already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c"(II) Module already built-in (II) intel(0): Output VGA using monitor section Standardbildschirm (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): No SDVO device found on SDVOB (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Output VGA connected (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): EDID for output VGA (II) intel(0): Manufacturer: EIZ Model: 1004 Serial#: 3059314760 (II) intel(0): Year: 1998 Week: 17 (II) intel(0): EDID Version: 1.1 (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) intel(0): Sync: Separate Composite SyncOnGreen (II) intel(0): Max H-Image Size [cm]: horiz.: 31 vert.: 23 (II) intel(0): Gamma: 1.80 (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) intel(0): redX: 0.625 redY: 0.340 greenX: 0.285 greenY: 0.600 (II) intel(0): blueX: 0.150 blueY: 0.065 whiteX: 0.283 whiteY: 0.298 (II) intel(0): Supported VESA Video Modes: (II) intel(0): 720x400@70Hz (II) intel(0): 720x400@88Hz (II) intel(0): 640x480@60Hz (II) intel(0): 640x480@67Hz (II) intel(0): 640x480@72Hz (II) intel(0): 640x480@75Hz (II) intel(0): 800x600@56Hz (II) intel(0): 800x600@60Hz (II) intel(0): 800x600@72Hz (II) intel(0): 800x600@75Hz (II) intel(0): 832x624@75Hz (II) intel(0): 1024x768@87Hz (interlaced) (II) intel(0): 1024x768@60Hz (II) intel(0): 1024x768@70Hz (II) intel(0): 1024x768@75Hz (II) intel(0): 1280x1024@75Hz (II) intel(0): 1152x870@75Hz (II) intel(0): Manufacturer's mask: 0 (II) intel(0): Supported Future Video Modes: (II) intel(0): #0: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) intel(0): #1: hsize: 1024 vsize 768 refresh: 100 vid: 26721 (II) intel(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 85 vid: 22897 (II) intel(0): #4: hsize: 1600 vsize 1200 refresh: 65 vid: 17833 (II) intel(0): #5: hsize: 1920 vsize 1080 refresh: 72 vid: 52433 (II) intel(0): Serial No: B6597048 (II) intel(0): Ranges: V min: 50 V max: 160 Hz, H min: 27 H max: 86 kHz, PixClock max 220 MHz (II) intel(0): Monitor name: EIZO FlexScan (II) intel(0): Monitor name: F56 (II) intel(0): EDID (in hex): (II) intel(0): 00ffffffffffff00153a0410487059b6 (II) intel(0): 110801010e1f1750e802b9a057499926 (II) intel(0): 10484cffff8061596168714f7159a945 (II) intel(0): d1cc01010101000000ff004236353937 (II) intel(0): 3034380a20202020000000fd0032a01b (II) intel(0): 5616000a202020202020000000fc0045 (II) intel(0): 495a4f20466c65785363616e000000fc (II) intel(0): 00204635360a2020202020202020002d (II) intel(0): Using hsync ranges from config file (II) intel(0): Using vrefresh ranges from config file (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (II) intel(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (II) intel(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (II) intel(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (II) intel(0): Modeline "640x480" 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (II) intel(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (II) intel(0): Modeline "720x400" 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (II) intel(0): Modeline "720x400" 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (II) intel(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (II) intel(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (II) intel(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (II) intel(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (II) intel(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (II) intel(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (II) intel(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (II) intel(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (II) intel(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (II) intel(0): Modeline "1024x768" 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (II) intel(0): Modeline "1024x768" 112.25 1024 1096 1200 1376 768 771 775 816 -hsync +vsync (II) intel(0): Modeline "1152x864" 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (II) intel(0): Modeline "1152x864" 119.75 1152 1232 1352 1552 864 867 871 910 -hsync +vsync (II) intel(0): Modeline "1600x1200" 175.00 1600 1712 1880 2160 1200 1203 1207 1248 -hsync +vsync (II) intel(0): Modeline "1920x1080" 210.25 1920 2056 2256 2592 1080 1083 1088 1128 -hsync +vsync (II) intel(0): EDID vendor "EIZ", prod id 4100 (II) intel(0): Not using default mode "640x350" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "720x400" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "832x624" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1152x768" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1440x900" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1600x1024" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1680x1050" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) intel(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) intel(0): Printing probed modes for output VGA (II) intel(0): Modeline "1920x1080"x71.9 210.25 1920 2056 2256 2592 1080 1083 1088 1128 -hsync +vsync (81.1 kHz) (II) intel(0): Modeline "1600x1200"x64.9 175.00 1600 1712 1880 2160 1200 1203 1207 1248 -hsync +vsync (81.0 kHz) (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) intel(0): Modeline "1152x864"x84.8 119.75 1152 1232 1352 1552 864 867 871 910 -hsync +vsync (77.2 kHz) (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) intel(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz) (II) intel(0): Modeline "1024x768"x100.0 112.25 1024 1096 1200 1376 768 771 775 816 -hsync +vsync (81.6 kHz) (II) intel(0): Modeline "1024x768"x84.9 94.50 1024 1096 1200 1376 768 771 775 809 -hsync +vsync (68.7 kHz) (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz) (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "1024x768"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz) (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Modeline "720x400"x87.8 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz) (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) intel(0): Output VGA connected (II) intel(0): Output VGA using initial mode 1152x864 (II) intel(0): detected 256 kB GTT. (II) intel(0): detected 7932 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (++) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/lib/xorg/modules//libxaa.so (II) Module xaa: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.2.0 ABI class: X.Org Video Driver, version 1.2 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac"(II) Module already built-in (II) intel(0): Comparing regs from server start up to After PreInit (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xfea40000 - 0xfea7ffff (0x40000) MS[B] [1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MS[B] [2] 0 0 0xfea80000 - 0xfeafffff (0x80000) MS[B] [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xfebff000 - 0xfebfffff (0x1000) MX[B] [8] -1 0 0xfea37c00 - 0xfea37fff (0x400) MX[B] [9] -1 0 0xfea38000 - 0xfea3bfff (0x4000) MX[B] [10] -1 0 0xfea40000 - 0xfea7ffff (0x40000) MX[B](B) [11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [12] -1 0 0xfea80000 - 0xfeafffff (0x80000) MX[B](B) [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [16] 0 0 0x0000dc00 - 0x0000dc07 (0x8) IS[B] [17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [18] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [19] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [20] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [21] -1 0 0x0000c800 - 0x0000c80f (0x10) IX[B] [22] -1 0 0x0000c880 - 0x0000c883 (0x4) IX[B] [23] -1 0 0x0000cc00 - 0x0000cc07 (0x8) IX[B] [24] -1 0 0x0000d000 - 0x0000d003 (0x4) IX[B] [25] -1 0 0x0000d080 - 0x0000d087 (0x8) IX[B] [26] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B] [27] -1 0 0x000008f8 - 0x000008f8 (0x1) IX[B] [28] -1 0 0x000008f0 - 0x000008f0 (0x1) IX[B] [29] -1 0 0x0000d880 - 0x0000d89f (0x20) IX[B] [30] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B] [31] -1 0 0x0000d480 - 0x0000d49f (0x20) IX[B] [32] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] [33] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B](B) [34] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [35] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (WW) xf86AcquireGART: AGPIOC_ACQUIRE failed (Invalid argument) (EE) GARTInit: AGPIOC_INFO failed (Invalid argument) (WW) intel(0): /dev/agpgart is either not available, or no memory is available for allocation. Using pre-allocated memory only. (==) intel(0): VideoRam: 7932 KB (II) intel(0): Attempting memory allocation with tiled buffers and large DRI memory manager reservation: (WW) intel(0): Disabling HW cursor because the cursor memory allocation failed. (WW) intel(0): Failed to allocate Overlay register space. (II) intel(0): Allocating 6780 scanlines for pixmap cache (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (II) intel(0): Attempting memory allocation with tiled buffers and small DRI memory manager reservation: (WW) intel(0): Failed to allocate Overlay register space. (II) intel(0): Allocating 6780 scanlines for pixmap cache (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (II) intel(0): Attempting memory allocation with untiled buffers and large DRI memory manager reservation: (WW) intel(0): Failed to allocate Overlay register space. (II) intel(0): Allocating 6848 scanlines for pixmap cache (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (II) intel(0): Attempting memory allocation with untiled buffers and small DRI memory manager reservation: (WW) intel(0): Failed to allocate Overlay register space. (II) intel(0): Allocating 6848 scanlines for pixmap cache (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (WW) intel(0): Not enough video memory. Disabling DRI. (WW) intel(0): Failed to allocate Overlay register space. (II) intel(0): Allocating 6848 scanlines for pixmap cache (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (EE) intel(0): Couldn't allocate video memory Fatal server error: AddScreen/ScreenInit failed for driver 0
Bootdata ok (command line is root=/dev/mapper/Root ro resume=/dev/mapper/Swap0 ) Linux version 2.6.18-4-amd64 (Debian 2.6.18.dfsg.1-12etch2) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Thu May 10 01:01:58 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f7b0000 (usable) BIOS-e820: 000000003f7b0000 - 000000003f7c0000 (ACPI data) BIOS-e820: 000000003f7c0000 - 000000003f7f0000 (ACPI NVS) BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved) DMI present. ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000f8c50 ACPI: RSDT (v001 A M I OEMRSDT 0x09000612 MSFT 0x00000097) @ 0x000000003f7b0000 ACPI: FADT (v002 A M I OEMFACP 0x09000612 MSFT 0x00000097) @ 0x000000003f7b0200 ACPI: MADT (v001 A M I OEMAPIC 0x09000612 MSFT 0x00000097) @ 0x000000003f7b0390 ACPI: MCFG (v001 A M I OEMMCFG 0x09000612 MSFT 0x00000097) @ 0x000000003f7b0400 ACPI: OEMB (v001 A M I AMI_OEM 0x09000612 MSFT 0x00000097) @ 0x000000003f7c0040 ACPI: DSDT (v001 C94GD C94GD112 0x00000112 INTL 0x02002026) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-000000003f7b0000 Bootmem setup node 0 0000000000000000-000000003f7b0000 On node 0 totalpages: 255479 DMA zone: 3057 pages, LIFO batch:0 DMA32 zone: 252422 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3f800000:bf500000) SMP: Allowing 4 CPUs, 2 hotplug CPUs Built 1 zonelists. Total pages: 255479 Kernel command line: root=/dev/mapper/Root ro resume=/dev/mapper/Swap0 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2792.369 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... Memory: 1014520k/1040064k available (1930k kernel code, 25156k reserved, 868k data, 176k init) Calibrating delay using timer specific routine.. 5589.80 BogoMIPS (lpj=11179600) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code ACPI: Core revision 20060707 Using local APIC timer interrupts. result 12465840 Detected 12.465 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 5584.87 BogoMIPS (lpj=11169743) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM1) Intel(R) Pentium(R) D CPU 2.80GHz stepping 04 Brought up 2 CPUs testing NMI watchdog ... OK. migration_cost=1155 checking if image is initramfs... it is Freeing initrd memory: 5633k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: ACPI device : hid PNP0A08 pnp: ACPI device : hid PNP0C01 pnp: ACPI device : hid PNP0200 pnp: ACPI device : hid PNP0B00 pnp: ACPI device : hid PNP0800 pnp: ACPI device : hid PNP0C04 pnp: ACPI device : hid PNP0510 pnp: ACPI device : hid PNP0700 pnp: ACPI device : hid PNP0401 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid INT0800 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0303 pnp: ACPI device : hid PNP0F03 pnp: ACPI device : hid PNP0501 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C02 pnp: ACPI device : hid PNP0C01 pnp: PnP ACPI: found 19 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI-GART: No AMD northbridge found. pnp: the driver 'system' has been registered pnp: match found with the PnP device '00:01' and the driver 'system' pnp: match found with the PnP device '00:09' and the driver 'system' pnp: match found with the PnP device '00:0b' and the driver 'system' pnp: match found with the PnP device '00:0c' and the driver 'system' pnp: match found with the PnP device '00:10' and the driver 'system' pnp: 00:10: ioport range 0x290-0x29f has been reserved pnp: match found with the PnP device '00:11' and the driver 'system' pnp: match found with the PnP device '00:12' and the driver 'system' PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: fdf00000-fdffffff PCI: Bridge: 0000:00:1c.1 IO window: e000-efff MEM window: feb00000-febfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1184785454.360:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A pnp: the driver 'serial' has been registered pnp: match found with the PnP device '00:0f' and the driver 'serial' 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize pnp: the driver 'i8042 kbd' has been registered pnp: match found with the PnP device '00:0d' and the driver 'i8042 kbd' pnp: the driver 'i8042 aux' has been registered pnp: match found with the PnP device '00:0e' and the driver 'i8042 aux' PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 176k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU1PM] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ AMI] OemTableId [ CPU2PM] [20060707] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x4 USB Universal Host Controller Interface driver v3.0 GSI 18 sharing vector 0xD1 and IRQ 18 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 209, io base 0x0000d400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem initialized libata version 2.00 loaded. GSI 19 sharing vector 0xD9 and IRQ 19 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 217, io base 0x0000d480 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected GSI 20 sharing vector 0xE1 and IRQ 20 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 225, io base 0x0000d800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000d880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 225 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA Probing IDE interface ide0... hda: TSSTcorpDVD-ROM SH-D162C, ATAPI CD/DVD-ROM drive hdb: Optiarc DVD RW AD-7173A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 17 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:01:00.0 to 64 eth0: RTL8168b/8111b at 0xffffc2000001c000, 00:13:8f:e8:ad:44, IRQ 177 ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xD080 ctl 0xD002 bmdma 0xC800 irq 217 ata2: SATA max UDMA/133 cmd 0xCC00 ctl 0xC882 bmdma 0xC808 irq 217 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : ata_piix ATA: abnormal status 0x7F on port 0xCC07 Vendor: ATA Model: WDC WD2500JS-00M Rev: 02.0 Type: Direct-Access ANSI SCSI revision: 05 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 209, io mem 0xfea37c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda:<6>hda: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66) sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: Attached scsi disk sda Probing IDE interface ide1... device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: PC Speaker as /class/input/input1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 irda_init() NET: Registered protocol family 23 pnp: the driver 'parport_pc' has been registered pnp: match found with the PnP device '00:08' and the driver 'parport_pc' parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] agpgart: Detected an Intel 945G Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 intel_rng: FWH not detected ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 217 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1b.0 to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2 EXT3 FS on dm-3, internal journal fuse init (API version 7.7) Adding 2096628k swap on /dev/mapper/Swap0. Priority:-1 extents:1 across:2096628k Adding 2097144k swap on /dev/mapper/Swap1. Priority:-2 extents:1 across:2097144k r8169: eth0: link up r8169: eth0: link up vbetool: vm86 mode not supported on 64 bit kernel ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 ioctl32(Xorg:3360): Unknown cmd fd(7) cmd(00004101){00} arg(00000000) on /dev/agpgart ioctl32(Xorg:3360): Unknown cmd fd(7) cmd(80044100){00} arg(ffb2a9c0) on /dev/agpgart eth0: no IPv6 routers present ioctl32(Xorg:3518): Unknown cmd fd(7) cmd(00004101){00} arg(00000000) on /dev/agpgart ioctl32(Xorg:3518): Unknown cmd fd(7) cmd(80044100){00} arg(ff86c250) on /dev/agpgart ioctl32(Xorg:3528): Unknown cmd fd(7) cmd(00004101){00} arg(00000000) on /dev/agpgart ioctl32(Xorg:3528): Unknown cmd fd(7) cmd(80044100){00} arg(ff9b6390) on /dev/agpgart
Attachment:
signature.asc
Description: Digital signature