xorg-docs: Changes to 'debian-unstable'
.gitignore | 10
ChangeLog | 1170 ++++++-
MAINTAINERS | 89
Makefile.am | 3
Makefile.in | 850 +++++
aclocal.m4 | 1058 ++++++
config.guess | 32
config.sub | 16
configure | 3923 +++++++++++++++++++++++
configure.ac | 13
debian/changelog | 21
debian/control | 7
debian/patches/01_specs_docs_fixes.diff | 97
debian/patches/series | 1
debian/rules | 5
debian/watch | 2
debian/xorg-docs.install | 86
debian/xspecs.install | 28
hardcopy/BDF/Makefile.in | 355 ++
hardcopy/CTEXT/Makefile.in | 355 ++
hardcopy/FSProtocol/Makefile.in | 355 ++
hardcopy/ICCCM/Makefile.in | 355 ++
hardcopy/ICE/Makefile.in | 355 ++
hardcopy/Makefile.in | 481 ++
hardcopy/RX/Makefile.in | 355 ++
hardcopy/SM/Makefile.in | 355 ++
hardcopy/X11/Makefile.in | 355 ++
hardcopy/XDMCP/Makefile.in | 355 ++
hardcopy/XIM/Makefile.in | 355 ++
hardcopy/XKB/Makefile.in | 355 ++
hardcopy/XLFD/Makefile.in | 355 ++
hardcopy/XPRINT/Makefile.in | 359 ++
hardcopy/XProtocol/Makefile.in | 355 ++
hardcopy/Xaw/Makefile.in | 355 ++
hardcopy/Xext/Makefile.in | 380 ++
hardcopy/Xi/Makefile.in | 355 ++
hardcopy/Xmu/Makefile.in | 355 ++
hardcopy/Xserver/Makefile.in | 357 ++
hardcopy/Xt/Makefile.in | 355 ++
hardcopy/Xv/Makefile.in | 355 ++
hardcopy/i18n/Makefile.in | 355 ++
hardcopy/man/Makefile.in | 355 ++
hardcopy/rstart/Makefile.in | 355 ++
hardcopy/saver/Makefile.in | 355 ++
hardcopy/xfs/Makefile.in | 355 ++
hardcopy/xtrans/Makefile.in | 355 ++
install-sh | 323 +
man/Makefile.in | 478 ++
man/general/Makefile.in | 383 ++
missing | 360 ++
sgml/Darwin.sgml | 396 --
sgml/LynxOS.sgml | 688 ----
sgml/Makefile.am | 45
sgml/Makefile.in | 574 +++
sgml/NetBSD.sgml | 817 ----
sgml/OS2Notes.sgml | 454 --
sgml/OpenBSD.sgml | 479 --
sgml/RELNOTES.sgml | 718 ++--
sgml/SCO.sgml | 278 -
sgml/Solaris.sgml | 372 --
sgml/Versions.sgml | 12
sgml/XACE-Spec.sgml | 506 ---
sgml/XKB-Config.sgml | 365 --
sgml/XKB-Enhancing.sgml | 881 -----
sgml/core/Makefile.am | 4
sgml/core/Makefile.in | 388 ++
sgml/core/Xserver-spec.sgml | 5337 ++++++++++++++++++++++++++++++++
sgml/ddx/Makefile.am | 4
sgml/ddx/Makefile.in | 388 ++
sgml/dps.sgml | 379 --
sgml/fonts.sgml | 2070 ------------
sgml/fonts/Makefile.am | 4
sgml/fonts/Makefile.in | 388 ++
sgml/fonts/fonts.sgml | 2070 ++++++++++++
sgml/graphics/Makefile.am | 4
sgml/graphics/Makefile.in | 388 ++
sgml/graphics/dps.sgml | 379 ++
sgml/input/Makefile.am | 4
sgml/input/Makefile.in | 388 ++
sgml/input/XKB-Config.sgml | 365 ++
sgml/input/XKB-Enhancing.sgml | 898 +++++
sgml/output/Makefile.am | 4
sgml/output/Makefile.in | 388 ++
sgml/platforms/Darwin.sgml | 396 ++
sgml/platforms/LynxOS.sgml | 688 ++++
sgml/platforms/Makefile.am | 4
sgml/platforms/Makefile.in | 388 ++
sgml/platforms/NetBSD.sgml | 817 ++++
sgml/platforms/OS2Notes.sgml | 454 ++
sgml/platforms/OpenBSD.sgml | 479 ++
sgml/platforms/SCO.sgml | 278 +
sgml/platforms/Solaris.sgml | 390 ++
sgml/registry/Makefile.am | 4
sgml/registry/Makefile.in | 388 ++
sgml/security/Makefile.am | 4
sgml/security/Makefile.in | 388 ++
sgml/security/XACE-Spec.sgml | 506 +++
sgmlrules.in | 63
specs/Composite/protocol | 281 -
specs/Damage/protocol | 190 -
specs/Fixes/protocol | 494 --
specs/Randr/protocol.txt | 519 ---
specs/Render/protocol | 1256 -------
specs/X11/CH13 | 2
specs/Xext/security.tex | 4
specs/Xserver/ddx.tbl.ms | 5283 -------------------------------
specs/Xt/CH01 | 6
specs/Xt/CH13 | 2
108 files changed, 36317 insertions(+), 16454 deletions(-)
New commits:
commit 27433fd09adf4ea558f697b5910eebef5d09881e
Author: Julien Cristau <jcristau@debian.org>
Date: Thu May 31 22:20:55 2007 +0200
Prepare changelog for upload.
diff --git a/debian/changelog b/debian/changelog
index 9443533..259c99b 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,12 +1,13 @@
-xorg-docs (1:1.4-2) UNRELEASED; urgency=low
+xorg-docs (1:1.4-2) unstable; urgency=low
* Fix the name of the XS-Vcs-Browser field.
* xorg-docs Conflicts/Replaces xprt-xprintorg from sarge (closes: #425461).
* Add debian/watch.
* Update to git HEAD, drop patch 01_specs_docs_fixes.diff applied upstream.
* Install the upstream changelog.
+ * Upload to unstable.
- -- Julien Cristau <jcristau@debian.org> Thu, 31 May 2007 21:58:48 +0200
+ -- Julien Cristau <jcristau@debian.org> Thu, 31 May 2007 22:18:53 +0200
xorg-docs (1:1.4-1) experimental; urgency=low
commit 4a712b4d9cad4c6826ea7160716c0230a673aad4
Author: Julien Cristau <jcristau@debian.org>
Date: Thu May 31 22:08:22 2007 +0200
Delete .gitignore.
diff --git a/.gitignore b/.gitignore
deleted file mode 100644
index f07bb69..0000000
--- a/.gitignore
+++ /dev/null
@@ -1,12 +0,0 @@
-Makefile
-Makefile.in
-aclocal.m4
-autom4te.cache
-config.guess
-config.log
-config.status
-config.sub
-configure
-install-sh
-missing
-*~
commit 5006399dfe039641e0082e5443caec529c0e2245
Author: Julien Cristau <jcristau@debian.org>
Date: Thu May 31 22:08:09 2007 +0200
autoreconf
diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..df0fd1e
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,850 @@
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Copyright 2005 Red Hat, Inc.
+#
+# Permission to use, copy, modify, distribute, and sell this software
+# and its documentation for any purpose is hereby granted without fee,
+# provided that the above copyright notice appear in all copies and
+# that both that copyright notice and this permission notice appear in
+# supporting documentation, and that the name of Red Hat not be used in
+# advertising or publicity pertaining to distribution of the software
+# without specific, written prior permission. Red Hat makes no
+# representations about the suitability of this software for any
+# purpose. It is provided "as is" without express or implied warranty.
+#
+# RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
+# NO EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
+# OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+# OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE
+# USE OR PERFORMANCE OF THIS SOFTWARE.
+#
+# Process this file with autoconf to create configure.
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+DIST_COMMON = README $(am__configure_deps) $(dist_x11doc_DATA) \
+ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(top_srcdir)/configure ChangeLog config.guess config.sub \
+ install-sh missing
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno configure.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(x11docdir)"
+dist_x11docDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(dist_x11doc_DATA)
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
+ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
+AMTAR = @AMTAR@
+APP_MAN_DIR = @APP_MAN_DIR@
+APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_HTMLDOC_FALSE = @BUILD_HTMLDOC_FALSE@
+BUILD_HTMLDOC_TRUE = @BUILD_HTMLDOC_TRUE@
+BUILD_PDFDOC_FALSE = @BUILD_PDFDOC_FALSE@
+BUILD_PDFDOC_TRUE = @BUILD_PDFDOC_TRUE@
+BUILD_PSDOC_FALSE = @BUILD_PSDOC_FALSE@
+BUILD_PSDOC_TRUE = @BUILD_PSDOC_TRUE@
+BUILD_TXTDOC_FALSE = @BUILD_TXTDOC_FALSE@
+BUILD_TXTDOC_TRUE = @BUILD_TXTDOC_TRUE@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DOCBOOKHTML = @DOCBOOKHTML@
+DOCBOOKPDF = @DOCBOOKPDF@
+DOCBOOKPS = @DOCBOOKPS@
+DOCBOOKTXT = @DOCBOOKTXT@
+DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
+DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+FILE_MAN_DIR = @FILE_MAN_DIR@
+FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+HARDCOPYDIR = @HARDCOPYDIR@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIB_MAN_DIR = @LIB_MAN_DIR@
+LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MAKE_HTML = @MAKE_HTML@
+MAKE_PDF = @MAKE_PDF@
+MAKE_PS = @MAKE_PS@
+MAKE_TEXT = @MAKE_TEXT@
+MISC_MAN_DIR = @MISC_MAN_DIR@
+MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+X11DOCDIR = @X11DOCDIR@
+am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = hardcopy man sgml
+x11docdir = @X11DOCDIR@
+dist_x11doc_DATA = MAINTAINERS
+EXTRA_DIST = \
+ MAINTAINERS \
+ misc/xlogo.epsi \
+ registry \
+ specs/BDF/bdf.ms \
+ specs/BDF/fig1.ps \
+ specs/BDF/fig2.ps \
+ specs/CTEXT/ctext.tbl.ms \
+ specs/FSProtocol/protocol.ms \
+ specs/GL/libGL.txt \
+ specs/i18n/Framework.ms \
+ specs/i18n/LocaleDB.ms \
+ specs/i18n/Trans.ms \
+ specs/ICCCM/icccm.ms \
+ specs/ICCCM/indexmacros.t \
+ specs/ICE/ICElib.ms \
+ specs/ICE/ice.ms \
+ specs/PM/PM_spec \
+ specs/Render/library \
+ specs/rstart/fix.awk \
+ specs/rstart/fix.nawk \
+ specs/rstart/fix.sed \
+ specs/rstart/rstartd.txt \
+ specs/rstart/rstart.ms \
+ specs/rstart/tmac.rfc \
+ specs/RX/RX.mif \
+ specs/saver/saver.ms \
+ specs/SIAddresses/hostname.txt \
+ specs/SIAddresses/IPv6.txt \
+ specs/SIAddresses/localuser.txt \
+ specs/SIAddresses/README \
+ specs/SM/SMlib.ms \
+ specs/SM/xsmp.ms \
+ specs/specindex.html \
+ specs/X11/abstract.t \
+ specs/X11/AppA \
+ specs/X11/AppB \
+ specs/X11/AppC \
+ specs/X11/AppD \
+ specs/X11/CH01 \
+ specs/X11/CH02 \
+ specs/X11/CH03 \
+ specs/X11/CH04 \
+ specs/X11/CH05 \
+ specs/X11/CH06 \
+ specs/X11/CH07 \
+ specs/X11/CH08 \
+ specs/X11/CH09 \
+ specs/X11/CH10 \
+ specs/X11/CH11 \
+ specs/X11/CH12 \
+ specs/X11/CH13 \
+ specs/X11/CH14 \
+ specs/X11/CH15 \
+ specs/X11/CH16 \
+ specs/X11/credits.t \
+ specs/X11/glossary \
+ specs/X11/indexmacros.t \
+ specs/X11/postproc \
+ specs/Xaw/AsciiSink \
+ specs/Xaw/AsciiSource \
+ specs/Xaw/AsciiText \
+ specs/Xaw/block.awk \
+ specs/Xaw/Box \
+ specs/Xaw/CH1 \
+ specs/Xaw/CH2 \
+ specs/Xaw/CH3.intro \
+ specs/Xaw/CH4.intro \
+ specs/Xaw/CH5.intro \
+ specs/Xaw/CH6.intro \
+ specs/Xaw/CH7.intro \
+ specs/Xaw/Command \
+ specs/Xaw/Dialog \
+ specs/Xaw/fixindex.awk \
+ specs/Xaw/Form \
+ specs/Xaw/Grip \
+ specs/Xaw/Label \
+ specs/Xaw/List \
+ specs/Xaw/MenuButton \
+ specs/Xaw/Paned \
+ specs/Xaw/Panner \
+ specs/Xaw/Porthole \
+ specs/Xaw/Repeater \
+ specs/Xaw/Scrollbar \
+ specs/Xaw/Simple \
+ specs/Xaw/SimpleMenu \
+ specs/Xaw/Sme \
+ specs/Xaw/SmeBSB \
+ specs/Xaw/SmeLine \
+ specs/Xaw/strings.mit \
+ specs/Xaw/strings.xaw \
+ specs/Xaw/StripChart \
+ specs/Xaw/Template \
+ specs/Xaw/Text \
+ specs/Xaw/TextActions \
+ specs/Xaw/TextCustom \
+ specs/Xaw/TextFuncs \
+ specs/Xaw/TextSink \
+ specs/Xaw/TextSource \
+ specs/Xaw/Toggle \
+ specs/Xaw/TPage_Credits \
+ specs/Xaw/Tree \
+ specs/Xaw/Viewport \
+ specs/Xaw/widg.idxmac.t \
+ specs/Xaw/Xtk.widgets \
+ specs/Xaw/Xtk.widg.front \
+ specs/XDMCP/xdmcp.ms \
+ specs/Xext/AppGroup.mif \
+ specs/Xext/bigreq.ms \
+ specs/Xext/buffer.ms \
+ specs/Xext/dbelib.tex \
+ specs/Xext/dbe.tex \
+ specs/Xext/DPMSLib.ms \
+ specs/Xext/DPMS.ms \
+ specs/Xext/evi.ms \
+ specs/Xext/lbxalg.mif \
+ specs/Xext/lbx.book \
+ specs/Xext/lbx.mif \
+ specs/Xext/mit-shm.ms \
+ specs/Xext/recordlib.ms \
+ specs/Xext/record.ms \
+ specs/Xext/security.tex \
+ specs/Xext/shapelib.ms \
+ specs/Xext/shape.ms \
+ specs/Xext/synclib.tex \
+ specs/Xext/sync.tex \
+ specs/Xext/tog-cup.ms \
+ specs/Xext/xc-misc.ms \
+ specs/Xext/xtest1.info \
+ specs/Xext/xtest1.mm \
+ specs/Xext/xtestlib.ms \
+ specs/Xext/xtest.ms \
+ specs/xfs/design.ms \
+ specs/xfs/FSlib.doc \
+ specs/Xi/encoding.ms \
+ specs/Xi/library.ms \
+ specs/XIM/xim.ms \
+ specs/Xi/porting.ms \
+ specs/Xi/protocol.ms \
+ specs/XKB/Proto/dflttrns.fm5 \
+ specs/XKB/Proto/encoding.fm5 \
+ specs/XKB/Proto/keysyms.fm5 \
+ specs/XKB/Proto/protocol.fm5 \
+ specs/XKB/Proto/prototoc.doc \
+ specs/XKB/Proto/title.fm5 \
+ specs/XKB/Proto/types.fm5 \
+ specs/XKB/Proto/XKBproto.book \
+ specs/XKB/XKBlib/allchaps.fm5 \
+ specs/XKB/XKBlib/allchaps.ix \
+ specs/XKB/XKBlib/allchaps.lof \
+ specs/XKB/XKBlib/allchaps.lot \
+ specs/XKB/XKBlib/allchaps.ps \
+ specs/XKB/XKBlib/allchaps.toc \
+ specs/XKB/XKBlib/fonts.fm5 \
+ specs/XKB/XKBlib/title.fm5 \
+ specs/XKB/XKBlib/XKBlib.book \
+ specs/XLFD/xlfd.tbl.ms \
+ specs/Xmu/Xmu.ms \
+ specs/XPRINT/xp_library.book \
+ specs/XPRINT/xp_library_cov.mif \
+ specs/XPRINT/xp_libraryIX.doc \
+ specs/XPRINT/xp_library.mif \
+ specs/XPRINT/xp_libraryTOC.doc \
+ specs/XPRINT/xp_proto.book \
+ specs/XPRINT/xp_proto_cov.mif \
+ specs/XPRINT/xp_protoIX.doc \
+ specs/XPRINT/xp_proto.mif \
+ specs/XPRINT/xp_protoTOC.doc \
+ specs/XProtocol/glossary \
+ specs/XProtocol/indexmacros.t \
+ specs/XProtocol/postproc \
+ specs/XProtocol/X11.encoding \
+ specs/XProtocol/X11.keysyms \
+ specs/XProtocol/X11.protocol \
+ specs/Xserver/analysis.tex \
+ specs/Xserver/appgroup.ms \
+ specs/Xserver/fontlib.ms \
+ specs/Xserver/secint.tex \
+ specs/Xserver/Xprt.book \
+ specs/Xserver/Xprt_cov.mif \
+ specs/Xserver/XprtIX.doc \
+ specs/Xserver/Xprt.mif \
+ specs/Xserver/XprtTOC.doc \
+ specs/Xt/appA \
+ specs/Xt/appB \
+ specs/Xt/appC \
+ specs/Xt/appD \
+ specs/Xt/appE \
+ specs/Xt/appF \
+ specs/Xt/CH01 \
+ specs/Xt/CH02 \
+ specs/Xt/CH03 \
+ specs/Xt/CH04 \
+ specs/Xt/CH05 \
+ specs/Xt/CH06 \
+ specs/Xt/CH07 \
+ specs/Xt/CH08 \
+ specs/Xt/CH09 \
+ specs/Xt/CH10 \
+ specs/Xt/CH11 \
+ specs/Xt/CH12 \
+ specs/Xt/CH13 \
+ specs/Xt/intr.idxmac.t \
+ specs/Xt/postproc \
+ specs/xtrans/Xtrans.mm \
+ specs/Xt/strings.mit \
+ specs/Xt/Xtk.intr.front \
+ specs/XvMC/XvMC_API.txt \
+ specs/Xv/xv-protocol-v2.txt \
+ util/block.awk \
+ util/fixindex.awk \
+ util/indexmacros.t \
+ util/macros.t
+
+all: all-recursive
+
+.SUFFIXES:
+am--refresh:
+ @:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
+ cd $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+uninstall-info-am:
+install-dist_x11docDATA: $(dist_x11doc_DATA)
+ @$(NORMAL_INSTALL)
+ test -z "$(x11docdir)" || $(mkdir_p) "$(DESTDIR)$(x11docdir)"
+ @list='$(dist_x11doc_DATA)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=$(am__strip_dir) \
+ echo " $(dist_x11docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(x11docdir)/$$f'"; \
+ $(dist_x11docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(x11docdir)/$$f"; \
+ done
+
+uninstall-dist_x11docDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(dist_x11doc_DATA)'; for p in $$list; do \
+ f=$(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(x11docdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(x11docdir)/$$f"; \
+ done
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ mkdir $(distdir)
+ $(mkdir_p) $(distdir)/misc $(distdir)/specs $(distdir)/specs/BDF $(distdir)/specs/CTEXT $(distdir)/specs/FSProtocol $(distdir)/specs/GL $(distdir)/specs/ICCCM $(distdir)/specs/ICE $(distdir)/specs/PM $(distdir)/specs/RX $(distdir)/specs/Render $(distdir)/specs/SIAddresses $(distdir)/specs/SM $(distdir)/specs/X11 $(distdir)/specs/XDMCP $(distdir)/specs/XIM $(distdir)/specs/XKB/Proto $(distdir)/specs/XKB/XKBlib $(distdir)/specs/XLFD $(distdir)/specs/XPRINT $(distdir)/specs/XProtocol $(distdir)/specs/Xaw $(distdir)/specs/Xext $(distdir)/specs/Xi $(distdir)/specs/Xmu $(distdir)/specs/Xserver $(distdir)/specs/Xt $(distdir)/specs/Xv $(distdir)/specs/XvMC $(distdir)/specs/i18n $(distdir)/specs/rstart $(distdir)/specs/saver $(distdir)/specs/xfs $(distdir)/specs/xtrans $(distdir)/util
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r $(distdir)
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+dist-tarZ: distdir
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__remove_distdir)
+
+dist-shar: distdir
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && cd $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ $(am__remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+distuninstallcheck:
+ @cd $(distuninstallcheck_dir) \
+ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+ for dir in "$(DESTDIR)$(x11docdir)"; do \
+ test -z "$$dir" || $(mkdir_p) "$$dir"; \
+ done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-dist_x11docDATA
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
Reply to: