--- Begin Message ---
Package: xserver-xfree86
Version: 4.1.0-14
Hello,
Excuse me for my poor english, but i'll try to be the more readable.
The problem :
I start an xsession, with X :1, i set for a user DISPLAY to :1 and i launch
with this user an xterm. Then when i switch to this new session and i type
exit in the xterm created, the server crash...
this problem appears in all version of xfree 4.1 but disappear with xfree
4.2. X driver is siliconmotion. I think the problem come from it.
I join my xf86config and the server log.
Thanks for reading this mail.
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.13 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.1.log", Time: Thu Jan 31 09:59:16 2002
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "Silicon Motion Lynx family"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc102"
(**) XKB: model: "pc102"
(**) Option "XkbLayout" "fr_FR@euro"
(**) XKB: layout: "fr_FR@euro"
(**) Option "XkbVariant" "fr_FR@euro"
(**) XKB: variant: "fr_FR@euro"
(**) Option "XkbOptions" "grp:menu_toggle,ctrl:ctrl_aa,grp_led:scroll"
(**) XKB: options: "grp:menu_toggle,ctrl:ctrl_aa,grp_led:scroll"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/share/fonts/truetype/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 8
(WW) Cannot open APM
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 03 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 104c,ac1c card 4000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 104c,ac1c card 4800,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 00:0d:0: chip 125d,1998 card 103c,000e rev 00 class 04,01,00 hdr 80
(II) PCI: 00:0d:1: chip 125d,1999 card 103c,000e rev 00 class 07,80,00 hdr 80
(II) PCI: 01:00:0: chip 126f,0710 card 103c,000e rev a3 class 03,00,00 hdr 00
(II) PCI: 06:00:0: chip 115d,0003 card 115d,0181 rev 03 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) Host-to-PCI bridge:
(II) Host-to-PCI bridge:
(II) Host-to-PCI bridge:
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x8c (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]
(II) Bus 1 prefetchable memory range:
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus 2: bridge is at (0:0:0), (-1,2,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 3: bridge is at (0:0:0), (-1,3,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 3 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 4: bridge is at (0:0:0), (-1,4,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 4 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 4 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 4 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 5: bridge is at (0:0:0), (-1,5,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 5 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 6: bridge is at (0:0:0), (-1,6,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus 6 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 6 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 6 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) Silicon Motion Inc. LynxEM rev 163, Mem @ 0xfd000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0x10c00000 - 0x10c03fff (0x4000) MX[B]
[1] -1 0 0x11000800 - 0x11000fff (0x800) MX[B]
[2] -1 0 0x11000000 - 0x110007ff (0x800) MX[B]
[3] -1 0 0xfedfe000 - 0xfedfffff (0x2000) MX[B]
[4] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[5] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[6] -1 0 0x00004800 - 0x0000487f (0x80) IX[B]
[7] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]
[8] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[9] -1 0 0x0000fce0 - 0x0000fcff (0x20) IX[B]
[10] -1 0 0x0000fcd0 - 0x0000fcdf (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0x10c00000 - 0x10c03fff (0x4000) MX[B]
[1] -1 0 0x11000800 - 0x11000fff (0x800) MX[B]
[2] -1 0 0x11000000 - 0x110007ff (0x800) MX[B]
[3] -1 0 0xfedfe000 - 0xfedfffff (0x2000) MX[B]
[4] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[5] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[6] -1 0 0x00004800 - 0x0000487f (0x80) IX[B]
[7] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]
[8] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[9] -1 0 0x0000fce0 - 0x0000fcff (0x20) IX[B]
[10] -1 0 0x0000fcd0 - 0x0000fcdf (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x10bfffff (0x10b00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x10bfffff (0x10b00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x10c00000 - 0x10c03fff (0x4000) MX[B]
[6] -1 0 0x11000800 - 0x11000fff (0x800) MX[B]
[7] -1 0 0x11000000 - 0x110007ff (0x800) MX[B]
[8] -1 0 0xfedfe000 - 0xfedfffff (0x2000) MX[B]
[9] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x00004800 - 0x0000487f (0x80) IX[B]
[14] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]
[15] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[16] -1 0 0x0000fce0 - 0x0000fcff (0x20) IX[B]
[17] -1 0 0x0000fcd0 - 0x0000fcdf (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "siliconmotion"
(II) Loading /usr/X11R6/lib/modules/drivers/siliconmotion_drv.o
(II) Module siliconmotion: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.2.2
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(II) Silicon Motion: driver (version 1.2.2) for Silicon Motion Lynx chipsets:
Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset LynxEM found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x10bfffff (0x10b00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x10c00000 - 0x10c03fff (0x4000) MX[B]
[6] -1 0 0x11000800 - 0x11000fff (0x800) MX[B]
[7] -1 0 0x11000000 - 0x110007ff (0x800) MX[B]
[8] -1 0 0xfedfe000 - 0xfedfffff (0x2000) MX[B]
[9] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x00004800 - 0x0000487f (0x80) IX[B]
[14] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]
[15] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[16] -1 0 0x0000fce0 - 0x0000fcff (0x20) IX[B]
[17] -1 0 0x0000fcd0 - 0x0000fcdf (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x10bfffff (0x10b00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x10c00000 - 0x10c03fff (0x4000) MX[B]
[6] -1 0 0x11000800 - 0x11000fff (0x800) MX[B]
[7] -1 0 0x11000000 - 0x110007ff (0x800) MX[B]
[8] -1 0 0xfedfe000 - 0xfedfffff (0x2000) MX[B]
[9] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[10] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[16] -1 0 0x00004800 - 0x0000487f (0x80) IX[B]
[17] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]
[18] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[19] -1 0 0x0000fce0 - 0x0000fcff (0x20) IX[B]
[20] -1 0 0x0000fcd0 - 0x0000fcdf (0x10) IX[B]
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(**) Silicon Motion(0): Depth 16, (--) framebuffer bpp 16
(==) Silicon Motion(0): RGB weight 565
(==) Silicon Motion(0): Default visual is TrueColor
(**) Silicon Motion(0): Option "pci_burst" "1"
(**) Silicon Motion(0): Option "fifo_aggressive"
(**) Silicon Motion(0): Option: pci_burst - PCI burst read enabled
(**) Silicon Motion(0): Option: fifo_aggressive set
(==) Silicon Motion(0): Using Hardware Cursor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) Silicon Motion(0): initializing int10
(II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000
(II) Silicon Motion(0): VESA BIOS detected
(II) Silicon Motion(0): VESA VBE Version 2.0
(II) Silicon Motion(0): VESA VBE Total Mem: 3712 kB
(II) Silicon Motion(0): VESA VBE OEM: Silicon Motion SM710 VGA BIOS
(II) Silicon Motion(0): VESA VBE OEM Software Rev: 2.0
(II) Silicon Motion(0): VESA VBE OEM Vendor: SM710
(II) Silicon Motion(0): VESA VBE OEM Product: SM710
(II) Silicon Motion(0): VESA VBE OEM Product Rev:
(--) Silicon Motion(0): Chipset: "LynxEM"
(II) Silicon Motion(0): Physical MMIO at 0xFD400000
(II) Silicon Motion(0): Logical MMIO at 0x40344000 - 0x40743FFF
(II) Silicon Motion(0): DPR=0x4034C000, VPR=0x40350000, IOBase=0x40644000
(II) Silicon Motion(0): DataPort=0x40344000 - 0x4034BFFF
(II) Silicon Motion(0): Physical frame buffer at 0xFD000000
(II) Silicon Motion(0): Logical frame buffer at 0x00000000 - 0xFFFFFFFF
(II) Silicon Motion(0): Cursor Offset: FFFFFC00 Reserved: 003AF800
(II) Silicon Motion(0): DSTN Panel Size = 800x600
SMI_PreInit vgaCRIndex=3d4, vgaIOBase=3d0, MMIOBase=40344000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.4
(II) Silicon Motion(0): I2C bus "I2C bus" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Silicon Motion(0): VESA VBE DDC read failed
(==) Silicon Motion(0): Using gamma correction (1.0, 1.0, 1.0)
(--) Silicon Motion(0): videoram: 4096kB
SMI_PreInit minClock=20000, maxClock=135000
(--) Silicon Motion(0): Detected current MCLK value of 85.909 MHz
(II) Silicon Motion(0): My Monitor: Using hsync range of 31.50-35.10 kHz
(II) Silicon Motion(0): My Monitor: Using vrefresh range of 50.00-100.00 Hz
(II) Silicon Motion(0): Clock range: 20.00 to 135.00 MHz
(II) Silicon Motion(0): Mode: 640x350 16-bpp, 85.079948Hz
(II) Silicon Motion(0): Not using default mode "640x350" (hsync out of range)
(II) Silicon Motion(0): Mode: 640x400 16-bpp, 85.079948Hz
(II) Silicon Motion(0): Not using default mode "640x400" (hsync out of range)
(II) Silicon Motion(0): Mode: 720x400 16-bpp, 85.038902Hz
(II) Silicon Motion(0): Not using default mode "720x400" (hsync out of range)
(II) Silicon Motion(0): Mode: 640x480 16-bpp, 60.000000Hz
(II) Silicon Motion(0): Mode: 640x480 16-bpp, 72.808800Hz
(II) Silicon Motion(0): Not using default mode "640x480" (hsync out of range)
(II) Silicon Motion(0): Mode: 640x480 16-bpp, 75.000000Hz
(II) Silicon Motion(0): Not using default mode "640x480" (hsync out of range)
(II) Silicon Motion(0): Mode: 640x480 16-bpp, 85.008308Hz
(II) Silicon Motion(0): Not using default mode "640x480" (hsync out of range)
(II) Silicon Motion(0): Mode: 800x600 16-bpp, 56.250000Hz
(II) Silicon Motion(0): Mode: 800x600 16-bpp, 60.316540Hz
(II) Silicon Motion(0): Not using default mode "800x600" (hsync out of range)
(II) Silicon Motion(0): Mode: 800x600 16-bpp, 72.187569Hz
(II) Silicon Motion(0): Not using default mode "800x600" (hsync out of range)
(II) Silicon Motion(0): Mode: 800x600 16-bpp, 75.000000Hz
(II) Silicon Motion(0): Not using default mode "800x600" (hsync out of range)
(II) Silicon Motion(0): Mode: 800x600 16-bpp, 85.136887Hz
(II) Silicon Motion(0): Not using default mode "800x600" (hsync out of range)
(II) Silicon Motion(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1024x768 16-bpp, 60.003841Hz
(II) Silicon Motion(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) Silicon Motion(0): Mode: 1024x768 16-bpp, 70.069359Hz
(II) Silicon Motion(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) Silicon Motion(0): Mode: 1024x768 16-bpp, 75.076218Hz
(II) Silicon Motion(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) Silicon Motion(0): Mode: 1024x768 16-bpp, 84.996689Hz
(II) Silicon Motion(0): Not using default mode "1024x768" (exceeds panel dimensions)
(II) Silicon Motion(0): Mode: 1152x864 16-bpp, 75.000000Hz
(II) Silicon Motion(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) Silicon Motion(0): Mode: 1280x960 16-bpp, 60.000000Hz
(II) Silicon Motion(0): Not using default mode "1280x960" (exceeds panel dimensions)
(II) Silicon Motion(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 1280x1024 16-bpp, 60.019741Hz
(II) Silicon Motion(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) Silicon Motion(0): Mode: 1280x1024 16-bpp, 75.024673Hz
(II) Silicon Motion(0): Not using default mode "1280x1024" (exceeds panel dimensions)
(II) Silicon Motion(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) Silicon Motion(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) Silicon Motion(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) Silicon Motion(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) Silicon Motion(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) Silicon Motion(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) Silicon Motion(0): Mode: 1400x1050 16-bpp, 59.975616Hz
(II) Silicon Motion(0): Not using default mode "1400x1050" (exceeds panel dimensions)
(II) Silicon Motion(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) Silicon Motion(0): Mode: 800x600 16-bpp, 56.250000Hz
(--) Silicon Motion(0): Virtual size is 800x600 (pitch 800)
(**) Silicon Motion(0): Default mode "800x600": 36.0 MHz (scaled from -0.2 MHz), 35.2 kHz, 56.2 Hz
(II) Silicon Motion(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(==) Silicon Motion(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x10bfffff (0x10b00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0x10c00000 - 0x10c03fff (0x4000) MX[B]
[7] -1 0 0x11000800 - 0x11000fff (0x800) MX[B]
[8] -1 0 0x11000000 - 0x110007ff (0x800) MX[B]
[9] -1 0 0xfedfe000 - 0xfedfffff (0x2000) MX[B]
[10] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B]
[11] -1 0 0xfd000000 - 0xfdffffff (0x1000000) MX[B](B)
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x00004800 - 0x0000487f (0x80) IX[B]
[18] -1 0 0x0000f400 - 0x0000f4ff (0x100) IX[B]
[19] -1 0 0x0000f800 - 0x0000f8ff (0x100) IX[B]
[20] -1 0 0x0000fce0 - 0x0000fcff (0x20) IX[B]
[21] -1 0 0x0000fcd0 - 0x0000fcdf (0x10) IX[B]
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Silicon Motion(0): Physical MMIO at 0xFD400000
(II) Silicon Motion(0): Logical MMIO at 0x40274000 - 0x40673FFF
(II) Silicon Motion(0): DPR=0x4027C000, VPR=0x40280000, IOBase=0x40574000
(II) Silicon Motion(0): DataPort=0x40274000 - 0x4027BFFF
(==) Silicon Motion(0): Write-combining range (0xfd000000,0x400000)
(II) Silicon Motion(0): Physical frame buffer at 0xFD000000
(II) Silicon Motion(0): Logical frame buffer at 0x40674000 - 0x40A73FFF
(II) Silicon Motion(0): Cursor Offset: 003FFC00 Reserved: 003AF800
(II) Silicon Motion(0): DSTN Panel Size = 800x600
(II) Silicon Motion(0): Current mode 0x57.
(II) Silicon Motion(0): Saved current video mode. Register dump:
(II) Silicon Motion(0): START register dump ------------------
MISCELLANEOUS OUTPUT
2B
SEQUENCER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 03 01 0F 03 0E 25 25 25 25 25 25 25 25 25 25 25
10| 08 00 00 00 00 0A 17 00 51 00 00 00 00 00 00 00
20| 84 80 30 00 01 00 00 00 00 00 00 00 00 00 00 00
30| 25 41 98 01 C0 25 25 25 25 25 25 25 00 00 81 2C
40| 00 AA 00 00 40 38 00 5F 40 1C A1 40 00 25 25 25
50| 02 24 D9 C7 CC 31 2C 2D 04 57 19 25 25 00 00 25
60| 01 00 7A 1A 1A 00 00 00 50 04 0C 02 1C 85 0E 04
70| 87 81 0E 35 05 20 25 25 25 25 25 25 25 25 25 25
80| FF 00 00 18 00 00 00 25 52 01 D8 00 00 FF 25 25
90| 00 00 00 00 25 25 25 25 25 25 25 25 25 25 25 25
A0| 00 00 00 80 00 ED ED ED 00 00 00 00 00 00 00 00
CRT CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 7F 63 63 00 69 19 72 F0 00 60 00 00 00 00 00 00
10| 58 0C 57 64 40 57 00 E3 FF 00 00 00 00 00 00 00
30| 00 00 00 00 00 88 02 20 00 00 20 40 00 00 48 80
40| 7F 63 00 69 19 72 58 00 59 0D E0 20 63 57 00 00
90| 56 4A 5E 55 86 9D 8E AA 8A A3 DF 33 00 00 1B 00
A0| 00 00 00 00 00 00 00 00 00 00 00 00 00 00
GRAPHICS CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 00 00 00 00 00 40 05 0F FF
ATTRIBUTE 0CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
10| 41 00 0F 00 00
DPR x0 x4 x8 xC
00| C180C358 F2F5F1AB F00EC062 000000CC
10| F406F000 FF0029A7 FF00C618 80C0F000
20| FF000000 FF000000 FF000000 F001C000
30| F083F040 FFFFFFFF FFFFFFFF F000F104
40| FFF00080 FFF02402
VPR x0 x4 x8 xC
00| 00020000 0000083E 00000000 00000000
10| 00CA00C8 00020040 03C70002 00040080
20| 00020000 00000000 01410040 00010422
30| 00005000 00010000 00000000 00000000
40| 00000000 00000000 00000000 00000000
50| 00000000 01026543 00000542 00EDEDED
60| 000001B4
CPR x0 x4 x8 xC
00| 00000000 00080004 00010480 00004084
10| 00000000 00000000 00000006
(II) Silicon Motion(0): END register dump --------------------
(II) Silicon Motion(0): Setting mode 0x57
(II) Silicon Motion(0): Done restoring mode. Register dump:
(II) Silicon Motion(0): START register dump ------------------
MISCELLANEOUS OUTPUT
2B
SEQUENCER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 01 01 0F 03 0E 25 25 25 25 25 25 25 25 25 25 25
10| 08 00 00 00 00 0A 17 00 51 00 00 00 00 00 00 00
20| 84 80 30 00 01 00 00 00 00 00 00 00 00 00 00 00
30| 25 41 98 01 C0 25 25 25 25 25 25 25 00 00 81 2C
40| 00 AA 00 00 40 38 00 5F 40 1C A1 40 00 25 25 25
50| 02 24 D9 C7 CC 31 2C 2D 04 57 19 25 25 00 00 25
60| 01 00 7A 1A 1A 00 00 00 50 04 0C 02 1C 85 0E 04
70| 87 81 0E 35 05 20 25 25 25 25 25 25 25 25 25 25
80| FF 00 00 18 00 00 00 25 52 01 D8 00 00 FF 25 25
90| 00 00 00 00 25 25 25 25 25 25 25 25 25 25 25 25
A0| 00 00 00 80 00 ED ED ED 00 00 00 00 00 00 00 00
CRT CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 7F 63 63 00 69 19 72 F0 00 60 00 00 00 00 00 00
10| 58 0C 57 64 40 57 00 E3 FF 00 00 00 00 00 00 00
30| 00 00 00 00 00 88 02 20 00 00 20 40 00 00 48 80
40| 7F 63 00 69 19 72 58 00 59 0D E0 20 63 57 00 00
90| 56 4A 5E 55 86 9D 8E AA 8A A3 DF 33 00 00 1B 00
A0| 00 00 00 00 00 00 00 00 00 00 00 00 00 00
GRAPHICS CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 00 00 00 00 00 40 05 0F FF
ATTRIBUTE 0CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
10| 41 00 0F 00 00
DPR x0 x4 x8 xC
00| C180C358 F2F5F1AB F00EC062 000000CC
10| F320F320 FF0029A7 FF00C618 80D4F000
20| FF000000 FFFFFFFF FFFFFFFF F000C000
30| F000F000 FFFFFFFF FFFFFFFF F320F320
40| FFF00000 FFF00000
VPR x0 x4 x8 xC
00| 00020000 0000083E 00000000 00000000
10| 00CA00C8 00020040 03C70002 00040080
20| 00020000 00000000 01410040 00010422
30| 00005000 00010000 00000000 00000000
40| 00000000 00000000 00000000 00000000
50| 00000000 01026543 00000542 00EDEDED
60| 00000162
CPR x0 x4 x8 xC
00| 00000000 00080004 00010480 00004084
10| 00000000 00000000 00000006
(II) Silicon Motion(0): END register dump --------------------
(II) Silicon Motion(0): FrameBuffer Box: 0,0 - 800,1054
(II) Silicon Motion(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
18 128x128 slots
32 8x8 color pattern slots
SMI_DGAInit 800x600 @ 16 bpp
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "PS/2"
(**) Mouse1: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Mouse1: Buttons: 3
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
(II) Silicon Motion(0): Setting mode 0x57
(II) Silicon Motion(0): Done restoring mode. Register dump:
(II) Silicon Motion(0): START register dump ------------------
MISCELLANEOUS OUTPUT
2B
SEQUENCER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 01 01 0F 03 0E 25 25 25 25 25 25 25 25 25 25 25
10| 08 00 00 00 00 0A 17 00 51 00 01 00 00 00 00 00
20| 84 80 30 00 01 00 00 00 00 00 00 00 00 00 00 00
30| 25 41 98 01 C0 25 25 25 25 25 25 25 00 00 81 2C
40| 00 AA 00 00 40 38 00 5F 40 1C A1 40 00 25 25 25
50| 02 24 D9 C7 CC 31 2C 2D 04 57 19 25 25 00 00 25
60| 01 00 7A 1A 1A 00 00 00 50 04 0C 02 1C 85 0E 04
70| 87 81 0E 35 05 20 25 25 25 25 25 25 25 25 25 25
80| FF 00 00 18 00 00 00 25 89 01 25 01 00 FF 25 25
90| 00 00 00 00 25 25 25 25 25 25 25 25 25 25 25 25
A0| 00 00 00 80 00 ED ED ED 00 00 00 00 00 00 00 00
CRT CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 7F 63 63 00 69 19 72 F0 00 60 00 00 00 00 00 00
10| 58 0C 57 64 40 57 00 E3 FF 00 00 00 00 00 00 00
30| 00 00 00 00 00 88 02 20 00 00 20 40 00 00 48 80
40| 7F 63 00 69 19 72 58 00 59 0D E0 20 63 57 00 00
90| 56 4A 5E 55 86 9D 8E AA 8A A3 DF 33 00 00 1B 00
A0| 00 00 00 00 00 00 00 00 00 00 00 00 00 00
GRAPHICS CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 00 00 00 00 00 40 05 0F FF
ATTRIBUTE 0CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
10| 41 00 0F 00 00
DPR x0 x4 x8 xC
00| C180C358 F000F000 F320C258 000000F0
10| F406F000 FF000000 FF00FFFF 80C0F000
20| FF000000 FF000000 FF000000 F001C000
30| F083F040 77DDBBEE 77DDBBEE F000F104
40| FFF00080 FFF02402
VPR x0 x4 x8 xC
00| 00020000 0000083E 00000000 00000000
10| 00CA00C8 00020040 03C70002 00040080
20| 00020000 00000000 01410040 00010422
30| 00005000 00010000 00000000 00000000
40| 00000000 00000000 00000000 00000000
50| 00000000 01026543 00000542 00EDEDED
60| 00000165
CPR x0 x4 x8 xC
00| 00000000 00080004 00010480 00004084
10| 00000000 00000000 00000006
(II) Silicon Motion(0): END register dump --------------------
(WW) Cannot open APM
(II) Silicon Motion(0): Physical MMIO at 0xFD400000
(II) Silicon Motion(0): Logical MMIO at 0x40274000 - 0x40673FFF
(II) Silicon Motion(0): DPR=0x4027C000, VPR=0x40280000, IOBase=0x40574000
(II) Silicon Motion(0): DataPort=0x40274000 - 0x4027BFFF
(II) Silicon Motion(0): Physical frame buffer at 0xFD000000
(II) Silicon Motion(0): Logical frame buffer at 0x40674000 - 0x40A73FFF
(II) Silicon Motion(0): Cursor Offset: 003FFC00 Reserved: 003AF800
(II) Silicon Motion(0): DSTN Panel Size = 800x600
(II) Silicon Motion(0): Current mode 0x57.
(II) Silicon Motion(0): Saved current video mode. Register dump:
(II) Silicon Motion(0): START register dump ------------------
MISCELLANEOUS OUTPUT
2B
SEQUENCER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 03 01 0F 03 0E 25 25 25 25 25 25 25 25 25 25 25
10| 08 00 00 00 00 0A 17 00 51 00 00 00 00 00 00 00
20| 84 80 30 00 01 00 00 00 00 00 00 00 00 00 00 00
30| 25 41 98 01 C0 25 25 25 25 25 25 25 00 00 81 2C
40| 00 AA 00 00 40 38 00 5F 40 1C A1 40 00 25 25 25
50| 02 24 D9 C7 CC 31 2C 2D 04 57 19 25 25 00 00 25
60| 01 00 7A 1A 1A 00 00 00 50 04 0C 02 1C 85 0E 04
70| 87 81 0E 35 05 20 25 25 25 25 25 25 25 25 25 25
80| FF 00 00 18 00 00 00 25 D3 00 94 01 00 FF 25 25
90| 00 00 00 00 25 25 25 25 25 25 25 25 25 25 25 25
A0| 00 00 00 80 00 ED ED ED 00 00 00 00 00 00 00 00
CRT CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 7F 63 63 00 69 19 72 F0 00 60 00 00 00 00 00 00
10| 58 0C 57 64 40 57 00 E3 FF 00 00 00 00 00 00 00
30| 00 00 00 00 00 88 02 20 00 00 20 40 00 00 48 80
40| 7F 63 00 69 19 72 58 00 59 0D E0 20 63 57 00 00
90| 56 4A 5E 55 86 9D 8E AA 8A A3 DF 33 00 00 1B 00
A0| 00 00 00 00 00 00 00 00 00 00 00 00 00 00
GRAPHICS CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 00 00 00 00 00 40 05 0F FF
ATTRIBUTE 0CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
10| 41 00 0F 00 00
DPR x0 x4 x8 xC
00| C280C376 F23FF00B F018C018 000000F0
10| F406F000 FF000000 FF00FFFF 80C0F000
20| FF000000 FF000000 FF000000 F001C000
30| F083F040 FFFFFFFF FFFFFFFF F000F104
40| FFF00080 FFF02402
VPR x0 x4 x8 xC
00| 00020000 0000083E 00000000 00000000
10| 00CA00C8 00020040 03C70002 00040080
20| 00020000 00000000 01410040 00010422
30| 00005000 00010000 00000000 00000000
40| 00000000 00000000 00000000 00000000
50| 00000000 01026543 00000542 00EDEDED
60| 00000110
CPR x0 x4 x8 xC
00| 00000000 00080004 00010480 00004084
10| 00000000 00000000 00000006
(II) Silicon Motion(0): END register dump --------------------
(II) Silicon Motion(0): Setting mode 0x57
(II) Silicon Motion(0): Done restoring mode. Register dump:
(II) Silicon Motion(0): START register dump ------------------
MISCELLANEOUS OUTPUT
2B
SEQUENCER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 01 01 0F 03 0E 25 25 25 25 25 25 25 25 25 25 25
10| 08 00 00 00 00 0A 17 00 51 00 00 00 00 00 00 00
20| 84 80 30 00 01 00 00 00 00 00 00 00 00 00 00 00
30| 25 41 98 01 C0 25 25 25 25 25 25 25 00 00 81 2C
40| 00 AA 00 00 40 38 00 5F 40 1C A1 40 00 25 25 25
50| 02 24 D9 C7 CC 31 2C 2D 04 57 19 25 25 00 00 25
60| 01 00 7A 1A 1A 00 00 00 50 04 0C 02 1C 85 0E 04
70| 87 81 0E 35 05 20 25 25 25 25 25 25 25 25 25 25
80| FF 00 00 18 00 00 00 25 D3 00 94 01 00 FF 25 25
90| 00 00 00 00 25 25 25 25 25 25 25 25 25 25 25 25
A0| 00 00 00 80 00 ED ED ED 00 00 00 00 00 00 00 00
CRT CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 7F 63 63 00 69 19 72 F0 00 60 00 00 00 00 00 00
10| 58 0C 57 64 40 57 00 E3 FF 00 00 00 00 00 00 00
30| 00 00 00 00 00 88 02 20 00 00 20 40 00 00 48 80
40| 7F 63 00 69 19 72 58 00 59 0D E0 20 63 57 00 00
90| 56 4A 5E 55 86 9D 8E AA 8A A3 DF 33 00 00 1B 00
A0| 00 00 00 00 00 00 00 00 00 00 00 00 00 00
GRAPHICS CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 00 00 00 00 00 40 05 0F FF
ATTRIBUTE 0CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
10| 41 00 0F 00 00
DPR x0 x4 x8 xC
00| C280C376 F23FF00B F018C018 000000F0
10| F320F320 FF000000 FF00FFFF 80D4F000
20| FF000000 FFFFFFFF FFFFFFFF F000C000
30| F000F000 FFFFFFFF FFFFFFFF F320F320
40| FFF00000 FFF00000
VPR x0 x4 x8 xC
00| 00020000 0000083E 00000000 00000000
10| 00CA00C8 00020040 03C70002 00040080
20| 00020000 00000000 01410040 00010422
30| 00005000 00010000 00000000 00000000
40| 00000000 00000000 00000000 00000000
50| 00000000 01026543 00000542 00EDEDED
60| 0000002B
CPR x0 x4 x8 xC
00| 00000000 00080004 00010480 00004084
10| 00000000 00000000 00000006
(II) Silicon Motion(0): END register dump --------------------
(II) Silicon Motion(0): Setting mode 0x57
(II) Silicon Motion(0): Done restoring mode. Register dump:
(II) Silicon Motion(0): START register dump ------------------
MISCELLANEOUS OUTPUT
2B
SEQUENCER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 01 01 0F 03 0E 25 25 25 25 25 25 25 25 25 25 25
10| 08 00 00 00 00 0A 17 00 51 00 01 00 00 00 00 00
20| 84 80 30 00 01 00 00 00 00 00 00 00 00 00 00 00
30| 25 41 98 01 C0 25 25 25 25 25 25 25 00 00 81 2C
40| 00 AA 00 00 40 38 00 5F 40 1C A1 40 00 25 25 25
50| 02 24 D9 C7 CC 31 2C 2D 04 57 19 25 25 00 00 25
60| 01 00 7A 1A 1A 00 00 00 50 04 0C 02 1C 85 0E 04
70| 87 81 0E 35 05 20 25 25 25 25 25 25 25 25 25 25
80| FF 00 00 18 00 00 00 25 89 01 25 01 00 FF 25 25
90| 00 00 00 00 25 25 25 25 25 25 25 25 25 25 25 25
A0| 00 00 00 80 00 ED ED ED 00 00 00 00 00 00 00 00
CRT CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 7F 63 63 00 69 19 72 F0 00 60 00 00 00 00 00 00
10| 58 0C 57 64 40 57 00 E3 FF 00 00 00 00 00 00 00
30| 00 00 00 00 00 88 02 20 00 00 20 40 00 00 48 80
40| 7F 63 00 69 19 72 58 00 59 0D E0 20 63 57 00 00
90| 56 4A 5E 55 86 9D 8E AA 8A A3 DF 33 00 00 1B 00
A0| 00 00 00 00 00 00 00 00 00 00 00 00 00 00
GRAPHICS CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 00 00 00 00 00 40 05 0F FF
ATTRIBUTE 0CONTROLLER
x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF
00| 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
10| 41 00 0F 00 00
DPR x0 x4 x8 xC
00| C000C000 F000F000 F1E6C13E 000000F0
10| F406F000 FF000000 FF00FFFF 80C0F000
20| FF000000 FF000000 FF000000 F001C000
30| F083F040 77DDBBEE 77DDBBEE F000F104
40| FFF00080 FFF02402
VPR x0 x4 x8 xC
00| 00020000 0000083E 00000000 00000000
10| 00CA00C8 00020040 03C70002 00040080
20| 00020000 00000000 01410040 00010422
30| 00005000 00010000 00000000 00000000
40| 00000000 00000000 00000000 00000000
50| 00000000 01026543 00000542 00EDEDED
60| 0000015D
CPR x0 x4 x8 xC
00| 00000000 00080004 00010480 00004084
10| 00000000 00000000 00000006
(II) Silicon Motion(0): END register dump --------------------
(II) Silicon Motion(0): I2C bus "I2C bus" removed.
(WW) Cannot open APM
(II) Silicon Motion(0): Physical MMIO at 0xFD400000
(II) Silicon Motion(0): Logical MMIO at 0x401A4000 - 0x405A3FFF
(II) Silicon Motion(0): DPR=0x401AC000, VPR=0x401B0000, IOBase=0x404A4000
(II) Silicon Motion(0): DataPort=0x401A4000 - 0x401ABFFF
(==) Silicon Motion(0): Write-combining range (0xfd000000,0x400000)
(II) Silicon Motion(0): Physical frame buffer at 0xFD000000
(II) Silicon Motion(0): Logical frame buffer at 0x405A4000 - 0x409A3FFF
(II) Silicon Motion(0): Cursor Offset: 003FFC00 Reserved: 003AF800
(II) Silicon Motion(0): DSTN Panel Size = 800x600
(EE) Cannot shmat() low memory
Fatal server error:
Caught signal 11. Server aborting
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.1.log".
Please report problems to submit@bugs.debian.org.
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/share/fonts/truetype/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc102"
Option "XkbLayout" "fr_FR@euro"
Option "XkbVariant" "fr_FR@euro"
Option "XkbOptions" "grp:menu_toggle,ctrl:ctrl_aa,grp_led:scroll"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31.5 - 35.1
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-100
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "Silicon Motion Lynx family"
Driver "siliconmotion"
Option "fifo_aggressive"
Option "pci_burst" "1"
# Option "pci_retry" "1"
#VideoRam 4096
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "Silicon Motion Lynx family"
Monitor "My Monitor"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "800x600"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
--- End Message ---