--- Begin Message ---
Package: xserver-xfree86
Version: 4.0.2-1
I tried the 4.0 xfree86 on my Virge graphics card. However, whenever
the content of the screen changes, there is some noise/snow on the
screen. The problem does not exist with the version 3 server. I have
attached a log of an xfree run. (This is the second submission of this
bug. My last posting was unintentionally base64 encoded.)
Best,
Oliver
Log:
XFree86 Version 4.0.2 / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 18 December 2000
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.18 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jan 10 19:17:56 2001
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "us"
(**) |-->Input Device "Generic Mouse"
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(0:15:0) S3 ViRGE/DX or /GX rev 1, Mem @ 0xe0000000/26
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.1.8
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.5.0
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) S3VIRGE: driver (version 1.5.0) for S3 ViRGE chipsets: virge, 86C325,
virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
trio 3d/2x, 86C362, 86C368
(--) Assigning device section with no busID to primary device
(--) Chipset virge dx found
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 0.1.0
(**) S3VIRGE(0): Depth 24, (--) framebuffer bpp 24
(==) S3VIRGE(0): RGB weight 888
(==) S3VIRGE(0): Default visual is TrueColor
(==) S3VIRGE(0): Using HW Cursor
(==) S3VIRGE(0): Using fb.
(II) S3VIRGE(0): initializing int10
(II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
(II) S3VIRGE(0): VESA BIOS detected
(--) S3VIRGE(0): Chipset: "virge dx"
(II) S3VIRGE(0): VESA VBE DDC supported
(II) S3VIRGE(0): Manufacturer: @@@ Model: 0 Serial#: 0
(II) S3VIRGE(0): Year: 1990 Week: 0
(II) S3VIRGE(0): EDID Version: 0.0
(II) S3VIRGE(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) S3VIRGE(0): Sync:
(II) S3VIRGE(0): Max H-Image Size [cm]: H-Size may change, V-Size may change
(II) S3VIRGE(0): Gamma: 1.00
(II) S3VIRGE(0): No DPMS capabilities specified; Monochorome/GrayScale Display
(II) S3VIRGE(0): redX: 0.000 redY: 0.000 greenX: 0.000 greenY: 0.000
(II) S3VIRGE(0): blueX: 0.000 blueY: 0.000 whiteX: 0.000 whiteY: 0.000
(II) S3VIRGE(0): Manufacturer's mask: 0
(--) S3VIRGE(0): unexpected EDID version 0 revision 0
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram: 4096k
(--) S3VIRGE(0): Detected current MCLK value of 54.886 MHz
(II) S3VIRGE(0): Generic Monitor: Using hsync range of 30.00-72.00 kHz
(II) S3VIRGE(0): Generic Monitor: Using vrefresh range of 50.00-120.00 Hz
(II) S3VIRGE(0): Clock range: 20.00 to 270.00 MHz
(WW) S3VIRGE(0): Default mode "1280x960" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "1600x1200" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1600x1200" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1600x1200" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1600x1200" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1600x1200" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1792x1344" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1792x1344" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1856x1392" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1856x1392" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1920x1440" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1920x1440" deleted (insufficient memory for mode)
(--) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024)
(**) S3VIRGE(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) S3VIRGE(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) S3VIRGE(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(++) S3VIRGE(0): DPI set to (100, 100)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 0.1.0
(==) Depth 24 pixmap format is 32 bpp
(**) S3VIRGE(0): Using FB
(II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
16 128x128 slots
4 256x256 slots
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
(**) S3VIRGE(0): DPMS enabled
(II) S3VIRGE(0): Using overlay video
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Generic Mouse: Protocol: "MouseSystems"
(**) Generic Mouse: Core Pointer
(==) Generic Mouse: Buttons: 3
(**) Generic Mouse: BaudRate: 1200
(II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE)
xinit: connection to X server lost.
waiting for X server to shut down
--- End Message ---