[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#389594: marked as done (xserver-xorg: wrong sync range selected)



Your message dated Thu, 24 May 2007 23:27:31 +0200
with message-id <46560343.1000108@ens-lyon.org>
and subject line Bug#389594: xserver-xorg: wrong sync range selected
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---
Package: xserver-xorg
Version: 1:7.1.0-1
Severity: normal


I' have a Matrox G400 video card:

01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400/G450 (rev 04)
(prog-if 00 [VGA])
        Subsystem: Matrox Graphics, Inc. Millennium G400 16Mb SDRAM
        Flags: bus master, medium devsel, latency 64, IRQ 193
        Memory at f6000000 (32-bit, prefetchable) [size=32M]
        Memory at f4000000 (32-bit, non-prefetchable) [size=16K]
        Memory at f3800000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at f5ff0000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 2
        Capabilities: [f0] AGP version 2.0

On statrtup the only video mode with correct timings is 1152x864 @ 75Hz.
Selecting other modes will generate incorrect timing, different from
the specified one with a vertical refresh way higher than the normal.
For instance 640 x 480 @ 85Hz has a vertical refresh of 127 Hz: seems that
the dot clock is set to the maximum allowable.
Inserting custom modeline in xorg.conf doesn't work,

OpenGL stopped working, but I'm not sure is is related to the bug or
is because I've rebuilt xorg.conf from scratch with dpkg-reconfigure.
I had to use a configuration like this in the Device section to make
OpenGL work:

        Option          "OldDmaInit"  "true"
        Option          "AGPMode"     "4"
        Option          "NoHal"       "true"


Also the ctrl-alt-grey+ / ctrl-alt-grey- stopped working, but using
the change menu from kde works with still wrong timings.

-- System Information:
Debian Release: testing/unstable
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-1-686
Locale: LANG=C, LC_CTYPE=it_IT (charmap=ISO-8859-1)

Versions of packages xserver-xorg depends on:
ii  debconf                 1.5.5            Debian configuration management sy
ii  x11-common              1:7.1.0-1        X Window System (X.Org) infrastruc
ii  xbase-clients           1:7.1.ds-3       miscellaneous X clients
ii  xkb-data                0.8-13           X Keyboard Extension (XKB) configu
ii  xserver-xorg-core       2:1.1.1-7        X.Org X server -- core server
ii  xserver-xorg-input-all  1:7.1.0-1        the X.Org X server -- input driver
ii  xserver-xorg-input-evde 1:1.1.2-3        X.Org X server -- evdev input driv
ii  xserver-xorg-input-kbd  1:1.1.0-2        X.Org X server -- keyboard input d
ii  xserver-xorg-input-mous 1:1.1.1-3        X.Org X server -- mouse input driv
ii  xserver-xorg-video-all  1:7.1.0-1        the X.Org X server -- output drive
ii  xserver-xorg-video-apm  1:1.1.1-3        X.Org X server -- APM display driv
ii  xserver-xorg-video-ark  1:0.6.0-3        X.Org X server -- ark display driv
ii  xserver-xorg-video-ati  1:6.6.2-2        X.Org X server -- ATI display driv
ii  xserver-xorg-video-chip 1:1.1.1-4        X.Org X server -- Chips display dr
ii  xserver-xorg-video-cirr 1:1.1.0-3        X.Org X server -- Cirrus display d
ii  xserver-xorg-video-cyri 1:1.1.0-4        X.Org X server -- Cyrix display dr
ii  xserver-xorg-video-dumm 1:0.2.0-3        X.Org X server -- dummy display dr
ii  xserver-xorg-video-fbde 1:0.3.0-3        X.Org X server -- fbdev display dr
ii  xserver-xorg-video-glin 1:1.1.1-3        X.Org X server -- Glint display dr
ii  xserver-xorg-video-i128 1:1.2.0-3        X.Org X server -- i128 display dri
ii  xserver-xorg-video-i740 1:1.1.0-3        X.Org X server -- i740 display dri
ii  xserver-xorg-video-i810 2:1.6.5-3        X.Org X server -- Intel i8xx, i9xx
ii  xserver-xorg-video-imst 1:1.1.0-3        X.Org X server -- IMSTT display dr
ii  xserver-xorg-video-mga  1:1.4.1.dfsg.1-4 X.Org X server -- MGA display driv
ii  xserver-xorg-video-neom 1:1.1.1-4        X.Org X server -- Neomagic display
ii  xserver-xorg-video-newp 1:0.2.0-3        X.Org X server -- Newport display
ii  xserver-xorg-video-nsc  1:2.8.1-3        X.Org X server -- NSC display driv
ii  xserver-xorg-video-nv [ 1:1.2.0-3        X.Org X server -- NV display drive
ii  xserver-xorg-video-rend 1:4.1.0.dfsg.1-4 X.Org X server -- Rendition displa
ii  xserver-xorg-video-s3vi 1:1.9.1-3        X.Org X server -- S3 ViRGE display
ii  xserver-xorg-video-sava 1:2.1.1-4        X.Org X server -- Savage display d
ii  xserver-xorg-video-sili 1:1.4.1-4        X.Org X server -- SiliconMotion di
ii  xserver-xorg-video-sis  1:0.9.1-3        X.Org X server -- SiS display driv
ii  xserver-xorg-video-sisu 1:0.8.1-3        X.Org X server -- SiS USB display
ii  xserver-xorg-video-tdfx 1:1.2.1-4        X.Org X server -- tdfx display dri
ii  xserver-xorg-video-tga  1:1.1.0-3        X.Org X server -- TGA display driv
ii  xserver-xorg-video-trid 1:1.2.1-3        X.Org X server -- Trident display
ii  xserver-xorg-video-tsen 1:1.1.0-3        X.Org X server -- Tseng display dr
ii  xserver-xorg-video-v4l  0.1.1-3          X.Org X server -- Video 4 Linux di
ii  xserver-xorg-video-vesa 1:1.2.1-3        X.Org X server -- VESA display dri
ii  xserver-xorg-video-vga  1:4.1.0-3        X.Org X server -- VGA display driv
ii  xserver-xorg-video-via  1:0.2.1-4        X.Org X server -- VIA display driv
ii  xserver-xorg-video-vmwa 1:10.13.0-3      X.Org X server -- VMware display d
ii  xserver-xorg-video-vood 1:1.1.0-3        X.Org X server -- Voodoo display d

Versions of packages xserver-xorg recommends:
ii  discover                   2.1.1-1       hardware identification system
ii  laptop-detect              0.12.1        attempt to detect a laptop
ii  mdetect                    0.5.2.1       mouse device autodetection tool
ii  xresprobe                  0.4.23debian1 X Resolution Probe

-- debconf information:
* xserver-xorg/multiple_possible_x-drivers:
* xserver-xorg/config/monitor/use_sync_ranges: true
* xserver-xorg/config/inputdevice/mouse/port: /dev/input/mice
* xserver-xorg/config/monitor/lcd: false
  xserver-xorg/config/device/default-identifier:
* xserver-xorg/autodetect_monitor: true
* xserver-xorg/config/display/default_depth: 24
* xserver-xorg/config/display/modes: 1152x864
* xserver-xorg/config/inputdevice/keyboard/internal:
* xserver-xorg/config/inputdevice/keyboard/options: compose:rctrl
* xserver-xorg/config/device/use_fbdev: false
* xserver-xorg/config/inputdevice/keyboard/variant:
* xserver-xorg/config/nonnumeric_string_error:
* xserver-xorg/config/inputdevice/keyboard/layout: us
* xserver-xorg/config/monitor/identifier: PHILIPS 107T
* xserver-xorg/config/inputdevice/mouse/emulate3buttons: false
* xserver-xorg/autodetect_mouse: false
* xserver-xorg/config/monitor/horiz-sync: 30-71
* xserver-xorg/config/monitor/range_input_error:
* xserver-xorg/config/write_dri_section: true
* xserver-xorg/config/inputdevice/keyboard/model: pc101
* xserver-xorg/config/device/driver: mga
* xserver-xorg/config/monitor/selection-method: Advanced
* xserver-xorg/config/write_files_section: true
* xserver-xorg/config/monitor/mode-list: 1152x864 @ 75Hz
* xserver-xorg/config/doublequote_in_string_error:
  xserver-xorg/config/monitor/screen-size: 17 inches (430 mm)
* shared/default-x-server: xserver-xorg
* xserver-xorg/config/inputdevice/mouse/protocol: ImPS/2
* shared/no_known_x-server:
* xserver-xorg/config/device/bus_id_error:
* xserver-xorg/config/monitor/vert-refresh: 50-160
* xserver-xorg/autodetect_keyboard: false
  xserver-xorg/config/fontpath/fontserver:
* xserver-xorg/config/modules: bitmap, dbe, ddc, dri, extmod, freetype, glx, int10, record, type1, v4l, vbe
* xserver-xorg/config/device/video_ram:
* xserver-xorg/config/device/identifier: Matrox Graphics, Inc. MGA G400/G450
* xserver-xorg/config/null_string_error:
* shared/multiple_possible_x-servers:
* xserver-xorg/config/device/bus_id: PCI:1:0:0
* xserver-xorg/autodetect_video_card: true
* xserver-xorg/config/inputdevice/keyboard/rules: xorg
  xserver-xorg/config/monitor/default-identifier:
*** HEADER EXTRACTED /var/spool/postfix/deferred/D/D5CF433E6B ***
*** MESSAGE FILE END /var/spool/postfix/deferred/D/D5CF433E6B ***



--- End Message ---
--- Begin Message ---
reassign 389594 xserver-xorg-video-mga
fixed 389594 1:1.4.4.dfsg.1-1
thank you


Closing as suggested earlier.

Brice


--- End Message ---

Reply to: