--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: xserver-xorg: Typo in the xorg.conf file.
- From: "Dr. Oliver Schurr" <oschurr@yahoo.com>
- Date: Fri, 09 Sep 2005 20:28:58 +0200
- Message-id: <E1EDncq-00020K-00@master.debian.org>
Package: xserver-xorg
Version: 6.8.2.dfsg.1-6
Severity: normal
In the Devices it says "Keyboard" and it should be "keyboard". Therefore
X will not load.
-- Package-specific info:
Contents of /var/lib/xfree86/X.roster:
xserver-xfree86
xserver-xorg
/etc/X11/X target unchanged from checksum in /var/lib/xfree86/X.md5sum.
X server symlink status:
lrwxrwxrwx 1 root root 17 2005-09-08 18:54 /etc/X11/X -> /usr/bin/X11/Xorg
-rwxr-xr-x 1 root root 1833304 2005-08-31 18:03 /usr/bin/X11/Xorg
Contents of /var/lib/xfree86/xorg.conf.roster:
xserver-xorg
VGA-compatible devices on PCI bus:
0000:00:08.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W [Millennium II]
/var/lib/xfree86/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 14488 2005-09-08 19:15 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
# Load "glx"
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "Device" "/dev/psaux"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "LCD"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31-80
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 60-75
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xf86config:
Section "Device"
Identifier "Videocard"
Driver "mga"
#VideoRam 4096
VideoRam 4096
# Insert Clocks lines here if appropriate
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "Videocard"
Monitor "LCD"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "1280x1024" "640x480" "800x600" "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "640x480" "800x600" "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "640x480" "800x600" "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Xorg X server log files on system:
-rw-r--r-- 1 root root 36233 2005-09-08 19:05 /var/log/Xorg.8.log
-rw-r--r-- 1 root root 32471 2005-09-09 19:45 /var/log/Xorg.0.log
-rw-r--r-- 1 root root 32719 2005-09-09 20:06 /var/log/Xorg.1.log
Contents of most recent Xorg X server log file
/var/log/Xorg.1.log:
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/oliver2:1
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X Window System Version 6.8.2 (Debian 6.8.2.dfsg.1-6 20050831134411 @squee)
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.12-1-686 i686 [ELF]
Current Operating System: Linux oliver2 2.4.31 #2 Sam Jun 4 13:39:48 CEST 2005 i686
Build Date: 31 August 2005
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.31 (root@oliver2) (gcc-Version 3.3.5 (Debian 1:3.3.5-13)) #2 Sam Jun 4 13:39:48 CEST 2005
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Fri Sep 9 19:51:06 2005
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "LCD"
(**) | |-->Device "Videocard"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(II) Open APM successful
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) using VT number 8
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0391 card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8391 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 1106,0000 rev 22 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 0000,0000 rev 30 class 06,00,00 hdr 00
(II) PCI: 00:07:5: chip 1106,3058 card 15dd,7609 rev 20 class 04,01,00 hdr 00
(II) PCI: 00:08:0: chip 102b,051b card 102b,0100 rev 00 class 03,00,00 hdr 00
(II) PCI: 00:0b:0: chip 10ec,8139 card 1113,ec01 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:7:4), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:8:0) Matrox Graphics, Inc. MGA 2164W [Millennium II] rev 0, Mem @ 0xd4000000/24, 0xd5000000/14, 0xd6000000/23
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd3ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xd8000000 - 0xd80000ff (0x100) MX[B]
[1] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[2] -1 0 0xd6000000 - 0xd67fffff (0x800000) MX[B](B)
[3] -1 0 0xd5000000 - 0xd5003fff (0x4000) MX[B](B)
[4] -1 0 0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
[5] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[6] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[7] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[8] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[11] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd8000000 - 0xd80000ff (0x100) MX[B]
[1] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[2] -1 0 0xd6000000 - 0xd67fffff (0x800000) MX[B](B)
[3] -1 0 0xd5000000 - 0xd5003fff (0x4000) MX[B](B)
[4] -1 0 0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
[5] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[6] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[7] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[8] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[11] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd8000000 - 0xd80000ff (0x100) MX[B]
[6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[7] -1 0 0xd6000000 - 0xd67fffff (0x800000) MX[B](B)
[8] -1 0 0xd5000000 - 0xd5003fff (0x4000) MX[B](B)
[9] -1 0 0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[13] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[14] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[18] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 6.8.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "mga"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.1.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) LoadModule: "keyboard"
(II) Loading /usr/X11R6/lib/modules/input/keyboard_drv.o
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
mgag550
(II) Primary Device is: PCI 00:08:0
(--) Assigning device section with no busID to primary device
(--) Chipset mga2164w found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd8000000 - 0xd80000ff (0x100) MX[B]
[6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[7] -1 0 0xd6000000 - 0xd67fffff (0x800000) MX[B](B)
[8] -1 0 0xd5000000 - 0xd5003fff (0x4000) MX[B](B)
[9] -1 0 0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[13] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[14] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[15] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[16] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[17] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[18] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd8000000 - 0xd80000ff (0x100) MX[B]
[6] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[7] -1 0 0xd6000000 - 0xd67fffff (0x800000) MX[B](B)
[8] -1 0 0xd5000000 - 0xd5003fff (0x4000) MX[B](B)
[9] -1 0 0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[16] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[17] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[18] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[19] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[20] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[21] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
[22] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(--) MGA(0): Chipset: "mga2164w"
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xD4000000
(--) MGA(0): MMIO registers at 0xD5000000
(--) MGA(0): Pseudo-DMA transfer window at 0xD6000000
(==) MGA(0): BIOS at 0xC0000
(--) MGA(0): Video BIOS info block at offset 0x07DC0
(--) MGA(0): Found and verified enhanced Video BIOS info block
(II) MGA(0): MGABios.RamdacType = 0x0
(**) MGA(0): VideoRAM: 4096 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(==) MGA(0): Write-combining range (0xd4000000,0x400000)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: 0x83cf580
(II) MGA(0): Manufacturer: AY_ Model: 2fd Serial#: 588
(II) MGA(0): Year: 2002 Week: 49
(II) MGA(0): EDID Version: 1.0
(II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) MGA(0): Sync: Separate
(II) MGA(0): Max H-Image Size [cm]: horiz.: 33 vert.: 27
(II) MGA(0): Gamma: 2.50
(II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) MGA(0): redX: 0.625 redY: 0.340 greenX: 0.279 greenY: 0.595
(II) MGA(0): blueX: 0.154 blueY: 0.069 whiteX: 0.312 whiteY: 0.328
(II) MGA(0): Supported VESA Video Modes:
(II) MGA(0): 720x400@70Hz
(II) MGA(0): 640x480@60Hz
(II) MGA(0): 640x480@72Hz
(II) MGA(0): 640x480@75Hz
(II) MGA(0): 800x600@56Hz
(II) MGA(0): 800x600@60Hz
(II) MGA(0): 800x600@72Hz
(II) MGA(0): 800x600@75Hz
(II) MGA(0): 1024x768@60Hz
(II) MGA(0): 1024x768@70Hz
(II) MGA(0): 1024x768@75Hz
(II) MGA(0): 1280x1024@75Hz
(II) MGA(0): Manufacturer's mask: 0
(II) MGA(0): Supported Future Video Modes:
(II) MGA(0): #0: hsize: 640 vsize 480 refresh: 60 vid: 16433
(II) MGA(0): #1: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) MGA(0): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) MGA(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) MGA(0): Supported additional Video Mode:
(II) MGA(0): clock: 25.2 MHz Image Size: 33 x 27 mm
(II) MGA(0): h_active: 640 h_sync: 648 h_sync_end 744 h_blank_end 784 h_border: 0
(II) MGA(0): v_active: 480 v_sync: 482 v_sync_end 484 v_blanking: 509 v_border: 0
(II) MGA(0): Supported additional Video Mode:
(II) MGA(0): clock: 40.0 MHz Image Size: 33 x 27 mm
(II) MGA(0): h_active: 800 h_sync: 840 h_sync_end 968 h_blank_end 1056 h_border: 0
(II) MGA(0): v_active: 600 v_sync: 601 v_sync_end 605 v_blanking: 628 v_border: 0
(II) MGA(0): Supported additional Video Mode:
(II) MGA(0): clock: 65.0 MHz Image Size: 33 x 27 mm
(II) MGA(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) MGA(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
(II) MGA(0): Supported additional Video Mode:
(II) MGA(0): clock: 108.0 MHz Image Size: 33 x 27 mm
(II) MGA(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) MGA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) MGA(0): end of I2C Monitor info
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 17 MHz
(--) MGA(0): Max pixel clock is 250 MHz
(--) MGA(0): MCLK used is 66.0 MHz
(WW) MGA(0): config file hsync range 31-80kHz not within DDC hsync ranges.
(WW) MGA(0): config file vrefresh range 60-75Hz not within DDC vrefresh ranges.
(II) MGA(0): LCD: Using hsync range of 31.00-80.00 kHz
(II) MGA(0): LCD: Using vrefresh range of 60.00-75.00 Hz
(II) MGA(0): Clock range: 17.75 to 250.00 MHz
(II) MGA(0): Not using default mode "640x350" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "640x400" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "720x400" (vrefresh out of range)
(II) MGA(0): Not using default mode "360x200" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) MGA(0): Not using default mode "640x480" (vrefresh out of range)
(II) MGA(0): Not using default mode "320x240" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
(II) MGA(0): Not using default mode "800x600" (vrefresh out of range)
(II) MGA(0): Not using default mode "400x300" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "512x384" (vrefresh out of range)
(II) MGA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "512x384" (vrefresh out of range)
(II) MGA(0): Not using default mode "1280x960" (hsync out of range)
(II) MGA(0): Not using default mode "640x480" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "640x512" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "800x600" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) MGA(0): Not using default mode "896x672" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) MGA(0): Not using default mode "928x696" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "1152x768" (vrefresh out of range)
(II) MGA(0): Not using default mode "576x384" (vrefresh out of range)
(II) MGA(0): Not using default mode "1152x864" (vrefresh out of range)
(II) MGA(0): Not using default mode "576x432" (vrefresh out of range)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "700x525" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1920x1200" (insufficient memory for mode)
(II) MGA(0): Not using default mode "960x600" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) MGA(0): Not using default mode "960x720" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (width too large for virtual size)
(II) MGA(0): Not using default mode "1680x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "1400x1050" (width too large for virtual size)
(II) MGA(0): Not using default mode "1440x900" (width too large for virtual size)
(--) MGA(0): Virtual size is 1280x1024 (pitch 1280)
(**) MGA(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) MGA(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) MGA(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) MGA(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) MGA(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) MGA(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) MGA(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) MGA(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
(**) MGA(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
(**) MGA(0): Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828
(**) MGA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) MGA(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
(**) MGA(0): Default mode "1280x768": 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) MGA(0): Modeline "1280x768" 80.14 1280 1344 1480 1680 768 769 772 795
(**) MGA(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) MGA(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) MGA(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) MGA(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) MGA(0): Default mode "960x600": 96.6 MHz, 74.5 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "960x600" 96.58 960 1024 1128 1296 600 600 602 621 doublescan
(**) MGA(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) MGA(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) MGA(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) MGA(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) MGA(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) MGA(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) MGA(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync
(**) MGA(0): Default mode "840x525": 73.6 MHz, 65.2 kHz, 60.1 Hz (D)
(II) MGA(0): Modeline "840x525" 73.57 840 892 984 1128 525 525 527 543 doublescan
(**) MGA(0): Default mode "700x525": 75.5 MHz, 77.0 kHz, 70.0 Hz (D)
(II) MGA(0): Modeline "700x525" 75.50 700 732 828 980 525 525 527 550 doublescan +hsync +vsync
(**) MGA(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync
(**) MGA(0): Default mode "720x450": 54.4 MHz, 56.9 kHz, 60.2 Hz (D)
(II) MGA(0): Modeline "720x450" 54.42 720 736 940 956 450 459 463 473 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) MGA(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) MGA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) MGA(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(**) MGA(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x400": 41.7 MHz, 49.7 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "640x400" 41.73 640 672 740 840 400 400 402 414 doublescan
(**) MGA(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
(II) MGA(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync
(**) MGA(0): Default mode "640x384": 40.1 MHz, 47.7 kHz, 60.1 Hz (D)
(II) MGA(0): Modeline "640x384" 40.07 640 672 740 840 384 384 386 397 doublescan
(**) MGA(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) MGA(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(**) MGA(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) MGA(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
(**) MGA(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) MGA(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) MGA(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) MGA(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) MGA(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) MGA(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) MGA(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) MGA(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) MGA(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) MGA(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(--) MGA(0): Display dimensions: (330, 270) mm
(--) MGA(0): DPI set to (98, 96)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
Skipping "/usr/X11R6/lib/modules/libfb.a:fbmmx.o": No symbols found
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.7
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd6000000 - 0xd67fffff (0x800000) MX[B]
[1] 0 0 0xd5000000 - 0xd5003fff (0x4000) MX[B]
[2] 0 0 0xd4000000 - 0xd4ffffff (0x1000000) MX[B]
[3] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xd8000000 - 0xd80000ff (0x100) MX[B]
[9] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[10] -1 0 0xd6000000 - 0xd67fffff (0x800000) MX[B](B)
[11] -1 0 0xd5000000 - 0xd5003fff (0x4000) MX[B](B)
[12] -1 0 0xd4000000 - 0xd4ffffff (0x1000000) MX[B](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[19] -1 0 0x0000e400 - 0x0000e403 (0x4) IX[B]
[20] -1 0 0x0000e000 - 0x0000e003 (0x4) IX[B]
[21] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
[22] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[23] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[24] -1 0 0x0000d000 - 0x0000d00f (0x10) IX[B]
[25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[26] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) MGA(0): Write-combining range (0xd4000000,0x400000)
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(--) MGA(0): 64 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(EE) MGA(0): Static buffer allocation failed, not initializing the DRI
(EE) MGA(0): Need at least 7680 kB video memory at this resolution, bit depth
(II) MGA(0): Using 614 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Driver provided FillCacheBltRects replacement
Setting up tile and stipple cache:
20 128x128 slots
5 256x256 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(--) MGA(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Device: "/dev/psaux"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Buttons" "5"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "XkbRules" "xfree86"
(**) Keyboard1: XkbRules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
(II) 3rd Button detected: disabling emulate3Button
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.4.31
Locale: LANG=de_AT@euro, LC_CTYPE=de_AT@euro (charmap=ISO-8859-15)
Versions of packages xserver-xorg depends on:
ii debconf [debconf-2.0] 1.4.58 Debian configuration management sy
ii libc6 2.3.5-6 GNU C Library: Shared libraries an
ii libgcc1 1:4.0.1-2 GCC support library
ii libxau6 6.8.2.dfsg.1-6 X Authentication library
ii libxdmcp6 6.8.2.dfsg.1-6 X Display Manager Control Protocol
ii xserver-common 6.8.2.dfsg.1-6 files and utilities common to all
ii zlib1g 1:1.2.2-4 compression library - runtime
Versions of packages xserver-xorg recommends:
pn discover1 <none> (no description available)
ii laptop-detect 0.12.1 attempt to detect a laptop
pn mdetect <none> (no description available)
ii xlibs 6.8.2.dfsg.1-6 X Window System client libraries m
pn xresprobe <none> (no description available)
-- debconf information:
* xserver-xorg/multiple_possible_x-drivers:
xserver-xorg/config/monitor/use_sync_ranges: true
* xserver-xorg/config/inputdevice/mouse/port: /dev/psaux
* xserver-xorg/config/monitor/lcd: true
* xserver-xorg/config/doublequote_in_string_error:
* xserver-xorg/config/monitor/screen-size: 17 inches (430 mm)
* shared/default-x-server: xserver-xorg
* xserver-xorg/autodetect_monitor: true
* xserver-xorg/config/inputdevice/mouse/protocol: ImPS/2
* shared/no_known_x-server:
* xserver-xorg/config/display/default_depth: 16
* xserver-xorg/config/display/modes: 1024x768, 800x600, 640x480
* xserver-xorg/config/device/bus_id_error:
* xserver-xorg/config/inputdevice/keyboard/internal:
* xserver-xorg/config/monitor/vert-refresh: 43-72
* xserver-xorg/config/inputdevice/keyboard/options: nodeadkeys
* xserver-xorg/config/inputdevice/mouse/zaxismapping: true
* xserver-xorg/config/device/use_fbdev: false
* xserver-xorg/config/inputdevice/keyboard/variant:
* xserver-xorg/config/nonnumeric_string_error:
* xserver-xorg/config/inputdevice/keyboard/layout: us
* xserver-xorg/config/modules: GLcore, bitmap, dbe, ddc, dri, extmod, freetype, glx, int10, record, speedo, type1, vbe
* xserver-xorg/config/monitor/identifier: Generic Monitor
* xserver-xorg/config/inputdevice/mouse/emulate3buttons: true
* xserver-xorg/autodetect_mouse: true
* xserver-xorg/config/monitor/horiz-sync: 30-57
* xserver-xorg/config/device/video_ram:
* xserver-xorg/config/monitor/range_input_error:
* xserver-xorg/config/write_dri_section: true
* xserver-xorg/config/inputdevice/keyboard/model: pc104
* xserver-xorg/config/device/driver: mga
* xserver-xorg/config/device/identifier: Generic Video Card
* xserver-xorg/config/monitor/selection-method: Medium
* xserver-xorg/config/null_string_error:
* shared/multiple_possible_x-servers:
* xserver-xorg/config/device/bus_id:
* xserver-xorg/config/write_files_section: true
* xserver-xorg/autodetect_video_card: true
* xserver-xorg/config/monitor/mode-list: 1024x768 @ 70Hz
* xserver-xorg/config/inputdevice/keyboard/rules: xorg
--- End Message ---