Bug#420840: xserver-xorg-video-intel: custom resolution set with 915resolution doesn't work anymore, Xorg falls back to 1280x1024
On Thu, Apr 26, 2007 at 20:27:01 +0200, Brice Goglin wrote:
> Tino Keitel wrote:
> > after upgrading to 2:2.0.0-1, the Xserver starts with 1280x1024.
> >
>
> Could you send the output of xrandr --verbose so that we see whether
> 1680x1050 is detected? If so 'xrandr --output LVDS --mode 1680x1050'
> might help you get your large resolution back (but you'll have to run
> this command each time you restart the server).
No, it isn't detected:
$ xrandr --verbose
Screen 0: minimum 320 x 200, current 1280 x 768, maximum 1280 x 1280
VGA disconnected (normal left inverted right)
Identifier: 0x5c
Timestamp: 793902956
Subpixel: unknown
Clones: TMDS-1
CRTCs: 0
TMDS-1 connected 1280x768+0+0 normal (normal left inverted right) 0mm x
0mm
Identifier: 0x5d
Timestamp: 793902956
Subpixel: horizontal rgb
Clones: VGA
CRTC: 0
CRTCs: 0 1
1280x800 (0x5f) 83.5MHz
h: width 1280 start 1344 end 1480 total 1680 skew 0 clock
49.7KHz
v: height 800 start 801 end 804 total 828 clock
60.0Hz
1280x768 (0x60) 80.1MHz
h: width 1280 start 1344 end 1480 total 1680 skew 0 clock
47.7KHz
v: height 768 start 769 end 772 total 795 clock
60.0Hz
1024x768 (0x61) 65.0MHz
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock
48.4KHz
v: height 768 start 771 end 777 total 806 clock
60.0Hz
800x600 (0x62) 40.0MHz
h: width 800 start 840 end 968 total 1056 skew 0 clock
37.9KHz
v: height 600 start 601 end 605 total 628 clock
60.3Hz
640x480 (0x63) 25.2MHz
h: width 640 start 656 end 752 total 800 skew 0 clock
31.5KHz
v: height 480 start 490 end 492 total 525 clock
59.9Hz
TV disconnected (normal left inverted right)
Identifier: 0x5e
Timestamp: 793902956
Subpixel: unknown
Clones:
CRTCs: 0 1
BOTTOM: 37 (0x00000000) range: (0,100)
RIGHT: 46 (0x00000000) range: (0,100)
TOP: 36 (0x00000000) range: (0,100)
LEFT: 54 (0x00000000) range: (0,100)
TV_FORMAT: ????
Regards,
Tino
Reply to: