[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#237574: marked as done (X cannot start under kernel 2.6.3)

Your message dated Tue, 13 Feb 2007 00:51:08 +0100
with message-id <45D0FD6C.6090503@ens-lyon.org>
and subject line ping timeout
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: xerver-xfree86
Version: 4.2.1-12.1
Since kernel 2.6.3 has recently become available to testing, I installed it and booted. The kernel was unable to startup gdm, and I also could not "startx". The 2.4 kernels do not appear to have this problem. The kernel log complains about errors with XFree86, so that is why I am submitting it under this package. 

Computer: Thinkpad 560X
CPU: Pentium 230MHz
Mem: 64MB

kernel package: kernel-image-2.6.3-1-386
gdm version: 2.4.1.7-1

The XFree86.0.log and kernel log (from dmesg) are both pasted below.

-Mason

=============start of /var/log/XFree86.0.log============
This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.2.1.1 (Debian 4.2.1-12.1 20031003005825 james@nocrew.org) / X 
Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 October 2002
       If the server is older than 6-12 months, or if your card is
       newer than the above date, look for a newer version before
       reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.21-rc1-ac1-cryptoloop i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Mar 11 22:52:04 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
       Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
       Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Spe 
edo,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
       XFree86 ANSI C Emulation: 0.1
       XFree86 Video Driver: 0.5
       XFree86 XInput driver : 0.3
       XFree86 Server Extension : 0.1
       XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.0.0
       Module class: XFree86 Font Renderer
       ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 0.1.0
       ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7100 card 0000,0000 rev 01 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7110 card 0000,0000 rev 01 class 06,80,00 hdr 80 (II) PCI: 00:01:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00 (II) PCI: 00:01:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:01:3: chip 8086,7113 card 0000,0000 rev 01 class 06,80,00 hdr 00 (II) PCI: 00:02:0: chip 104c,ac16 card 0000,0000 rev 02 class 06,07,00 hdr 82 (II) PCI: 00:02:1: chip 104c,ac16 card 0000,0000 rev 02 class 06,07,00 hdr 82 (II) PCI: 00:03:0: chip 10c8,0004 card 1014,00ba rev 00 class 03,00,00 hdr 00 
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 0.1.0
       ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
       [0] -1 0        0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
       [0] -1 0        0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
       [0] -1 0        0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(0:3:0) Neomagic NM2160 rev 0, Mem @ 0x08000000/24, 0x09200000/21, 0x0 
9000000/20
(II) Addressable bus resource ranges are
       [0] -1 0        0x00000000 - 0xffffffff (0x0) MX[B]
       [1] -1 0        0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
       [0] -1 0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
       [1] -1 0        0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
       [2] -1 0        0x000f0000 - 0x000fffff (0x10000) MX[B]
       [3] -1 0        0x000c0000 - 0x000effff (0x30000) MX[B]
       [4] -1 0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
       [5] -1 0        0x0000ffff - 0x0000ffff (0x1) IX[B]
       [6] -1 0        0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
       [0] -1 0        0x09000000 - 0x090fffff (0x100000) MX[B](B)
       [1] -1 0        0x09200000 - 0x093fffff (0x200000) MX[B](B)
       [2] -1 0        0x08000000 - 0x08ffffff (0x1000000) MX[B](B)
       [3] -1 0        0x00009000 - 0x0000901f (0x20) IX[B]
       [4] -1 0        0x0000fcf0 - 0x0000fcff (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
       [0] -1 0        0x09000000 - 0x090fffff (0x100000) MX[B](B)
       [1] -1 0        0x09200000 - 0x093fffff (0x200000) MX[B](B)
       [2] -1 0        0x08000000 - 0x08ffffff (0x1000000) MX[B](B)
       [3] -1 0        0x00009000 - 0x0000901f (0x20) IX[B]
       [4] -1 0        0x0000fcf0 - 0x0000fcff (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
       [0] -1 0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
       [1] -1 0        0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B)
       [2] -1 0        0x000f0000 - 0x000fffff (0x10000) MX[B]
       [3] -1 0        0x000c0000 - 0x000effff (0x30000) MX[B]
       [4] -1 0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
       [5] -1 0        0x0000ffff - 0x0000ffff (0x1) IX[B]
       [6] -1 0        0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
       [0] -1 0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
       [1] -1 0        0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B)
       [2] -1 0        0x000f0000 - 0x000fffff (0x10000) MX[B]
       [3] -1 0        0x000c0000 - 0x000effff (0x30000) MX[B]
       [4] -1 0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
       [5] -1 0        0x09000000 - 0x090fffff (0x100000) MX[B](B)
       [6] -1 0        0x09200000 - 0x093fffff (0x200000) MX[B](B)
       [7] -1 0        0x08000000 - 0x08ffffff (0x1000000) MX[B](B)
       [8] -1 0        0x0000ffff - 0x0000ffff (0x1) IX[B]
       [9] -1 0        0x00000000 - 0x000000ff (0x100) IX[B]
       [10] -1 0       0x00009000 - 0x0000901f (0x20) IX[B]
       [11] -1 0       0x0000fcf0 - 0x0000fcff (0x10) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:debug_xform.o": No symb 
ols found
(II) Module GLcore: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.0.0
       ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.0.0
       Module class: XFree86 Server Extension
       ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.0.0
       ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.0.0
       Module class: XFree86 Server Extension
       ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.1.10
       Module class: XFree86 Font Renderer
       ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.0.0
       ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.0.0
       ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.13.0
       Module class: XFree86 Server Extension
       ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols foun 
d
(II) Module speedo: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.0.1
       Module class: XFree86 Font Renderer
       ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.0.1
       Module class: XFree86 Font Renderer
       ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.0.0
       ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "neomagic"
(II) Loading /usr/X11R6/lib/modules/drivers/neomagic_drv.o
(II) Module neomagic: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.0.0
       Module class: XFree86 Video Driver
       ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.0.0
       Module class: XFree86 XInput Driver
       ABI class: XFree86 XInput driver, version 0.3
(II) NEOMAGIC: Driver for Neomagic chipsets: neo2070, neo2090, neo2093,
       neo2097, neo2160, neo2200, neo2230, neo2360, neo2380
(II) Primary Device is: PCI 00:03:0
(--) Assigning device section with no busID to primary device
(--) Chipset neo2160 found
(II) resource ranges after xf86ClaimFixedResources() call:
       [0] -1 0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
       [1] -1 0        0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B)
       [2] -1 0        0x000f0000 - 0x000fffff (0x10000) MX[B]
       [3] -1 0        0x000c0000 - 0x000effff (0x30000) MX[B]
       [4] -1 0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
       [5] -1 0        0x09000000 - 0x090fffff (0x100000) MX[B](B)
       [6] -1 0        0x09200000 - 0x093fffff (0x200000) MX[B](B)
       [7] -1 0        0x08000000 - 0x08ffffff (0x1000000) MX[B](B)
       [8] -1 0        0x0000ffff - 0x0000ffff (0x1) IX[B]
       [9] -1 0        0x00000000 - 0x000000ff (0x100) IX[B]
       [10] -1 0       0x00009000 - 0x0000901f (0x20) IX[B]
       [11] -1 0       0x0000fcf0 - 0x0000fcff (0x10) IX[B]
(II) resource ranges after probing:
       [0] -1 0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
       [1] -1 0        0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B)
       [2] -1 0        0x000f0000 - 0x000fffff (0x10000) MX[B]
       [3] -1 0        0x000c0000 - 0x000effff (0x30000) MX[B]
       [4] -1 0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
       [5] -1 0        0x09000000 - 0x090fffff (0x100000) MX[B](B)
       [6] -1 0        0x09200000 - 0x093fffff (0x200000) MX[B](B)
       [7] -1 0        0x08000000 - 0x08ffffff (0x1000000) MX[B](B)
       [8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
       [9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
       [10] 0 0        0x000b8000 - 0x000bffff (0x8000) MS[B]
       [11] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
       [12] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
       [13] -1 0       0x00009000 - 0x0000901f (0x20) IX[B]
       [14] -1 0       0x0000fcf0 - 0x0000fcff (0x10) IX[B]
       [15] 0 0        0x000003b0 - 0x000003bb (0xc) IS[B]
       [16] 0 0        0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 0.1.0
       ABI class: XFree86 Video Driver, version 0.5
(II) NEOMAGIC(0): Chipset is a MagicGraph 128XD (NM2160)
(II) NEOMAGIC(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x000 
0
(--) NEOMAGIC(0): Panel is a 800x600 color TFT display
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) NEOMAGIC(0): initializing int10
(II) NEOMAGIC(0): Primary V_BIOS segment is: 0xc000
(II) NEOMAGIC(0): VESA BIOS detected
(II) NEOMAGIC(0): VESA VBE Version 2.0
(II) NEOMAGIC(0): VESA VBE Total Mem: 1984 kB
(II) NEOMAGIC(0): VESA VBE OEM: MagicGraph 128XD 40K SVGA BIOS
(II) NEOMAGIC(0): VESA VBE OEM Software Rev: 1.16
(II) NEOMAGIC(0): VESA VBE OEM Vendor: NeoMagic
(II) NEOMAGIC(0): VESA VBE OEM Product: MagicGraph 128XV
(II) NEOMAGIC(0): VESA VBE OEM Product Rev: 01.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) NEOMAGIC(0): VESA VBE DDC supported
(II) NEOMAGIC(0): VESA VBE DDC Level none
(II) NEOMAGIC(0): VESA VBE DDC transfer in appr. 0 sec.
(II) NEOMAGIC(0): VESA VBE DDC read failed
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.2.0
       ABI class: XFree86 Video Driver, version 0.5
(II) NEOMAGIC(0): I2C bus "I2C bus" initialized.
(II) NEOMAGIC(0): I2C device "I2C bus:ddc2" registered.
(II) NEOMAGIC(0): I2C device "I2C bus:ddc2" removed.
(--) NEOMAGIC(0): No DDC signal
(**) NEOMAGIC(0): Depth 15, (--) framebuffer bpp 16
(==) NEOMAGIC(0): RGB weight 555
(==) NEOMAGIC(0): Default visual is TrueColor
(==) NEOMAGIC(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NEOMAGIC(0): Internal LCD only display mode
(==) NEOMAGIC(0): using linear mode
(**) NEOMAGIC(0): using PCI Burst mode
(**) NEOMAGIC(0): Option StrangeLockups set: disabling some acceleration
(--) NEOMAGIC(0): FB base address is set at 0x8000000.
(--) NEOMAGIC(0): MMIO base address is set at 0x9200000.
(--) NEOMAGIC(0): MMIO base address2 is set at 0x9000000.
(--) NEOMAGIC(0): VideoRAM: 2048 kByte
(--) NEOMAGIC(0): Max Clock: 90000 kHz
(II) NEOMAGIC(0): Generic Monitor: Using hsync range of 30.00-54.00 kHz
(II) NEOMAGIC(0): Generic Monitor: Using vrefresh range of 50.00-85.00 Hz
(II) NEOMAGIC(0): Clock range:  11.00 to  90.00 MHz
(II) NEOMAGIC(0): Removing mode (640x350) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "640x350" (unknown reason)
(II) NEOMAGIC(0): Removing mode (320x175) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "320x175" (unknown reason)
(II) NEOMAGIC(0): Removing mode (640x400) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "640x400" (unknown reason)
(II) NEOMAGIC(0): Removing mode (320x200) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "320x200" (unknown reason)
(II) NEOMAGIC(0): Removing mode (720x400) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "720x400" (unknown reason)
(II) NEOMAGIC(0): Removing mode (360x200) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "360x200" (unknown reason)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Removing mode (400x300) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "400x300" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode clock/interlace/do 
ublescan)
(II) NEOMAGIC(0): Not using default mode "512x384" (bad mode clock/interlace/dou 
blescan)
(II) NEOMAGIC(0): Removing mode (1024x768) larger than the LCD panel (800x600) 
(II) NEOMAGIC(0): Not using default mode "1024x768" (unknown reason)
(II) NEOMAGIC(0): Removing mode (512x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "512x384" (unknown reason)
(II) NEOMAGIC(0): Removing mode (1024x768) larger than the LCD panel (800x600) 
(II) NEOMAGIC(0): Not using default mode "1024x768" (unknown reason)
(II) NEOMAGIC(0): Removing mode (512x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "512x384" (unknown reason)
(II) NEOMAGIC(0): Removing mode (1024x768) larger than the LCD panel (800x600) 
(II) NEOMAGIC(0): Not using default mode "1024x768" (unknown reason)
(II) NEOMAGIC(0): Removing mode (512x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "512x384" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode clock/interlace/do 
ublescan)
(II) NEOMAGIC(0): Removing mode (512x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "512x384" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1152x864" (width requires unsupported 
line pitch)
(II) NEOMAGIC(0): Removing mode (576x432) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "576x432" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1280x960" (insufficient memory for mod 
e)
(II) NEOMAGIC(0): Not using default mode "640x480" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "1280x960" (insufficient memory for mod 
e)
(II) NEOMAGIC(0): Not using default mode "640x480" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "1280x1024" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Removing mode (640x512) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "640x512" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1280x1024" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Removing mode (640x512) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "640x512" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1280x1024" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Removing mode (640x512) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "640x512" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "800x600" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "800x600" (hsync out of range)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "800x600" (bad mode clock/interlace/dou 
blescan)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "800x600" (bad mode clock/interlace/dou 
blescan)
(II) NEOMAGIC(0): Not using default mode "1600x1200" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "800x600" (bad mode clock/interlace/dou 
blescan)
(II) NEOMAGIC(0): Not using default mode "1792x1344" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "896x672" (bad mode clock/interlace/dou 
blescan)
(II) NEOMAGIC(0): Not using default mode "1792x1344" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "896x672" (bad mode clock/interlace/dou 
blescan)
(II) NEOMAGIC(0): Not using default mode "1856x1392" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "928x696" (bad mode clock/interlace/dou 
blescan)
(II) NEOMAGIC(0): Not using default mode "1856x1392" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "928x696" (bad mode clock/interlace/dou 
blescan)
(II) NEOMAGIC(0): Not using default mode "1920x1440" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "960x720" (bad mode clock/interlace/dou 
blescan)
(II) NEOMAGIC(0): Not using default mode "1920x1440" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "960x720" (bad mode clock/interlace/dou 
blescan)
(II) NEOMAGIC(0): Removing mode (832x624) larger than the LCD panel (800x600) 
(II) NEOMAGIC(0): Not using default mode "832x624" (unknown reason)
(II) NEOMAGIC(0): Removing mode (416x312) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "416x312" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1152x768" (width requires unsupported 
line pitch)
(II) NEOMAGIC(0): Removing mode (576x384) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "576x384" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1400x1050" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Removing mode (700x525) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "700x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1400x1050" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Removing mode (700x525) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "700x525" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1600x1024" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Removing mode (800x512) that won't display properly on LCD
(II) NEOMAGIC(0): Not using default mode "800x512" (unknown reason)
(II) NEOMAGIC(0): Not using default mode "1920x1440" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "960x720" (bad mode clock/interlace/dou 
blescan)
(II) NEOMAGIC(0): Not using default mode "2048x1536" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode clock/interlace/do 
ublescan)
(II) NEOMAGIC(0): Not using default mode "2048x1536" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode clock/interlace/do 
ublescan)
(II) NEOMAGIC(0): Not using default mode "2048x1536" (insufficient memory for mo 
de)
(II) NEOMAGIC(0): Not using default mode "1024x768" (bad mode clock/interlace/do 
ublescan)
(--) NEOMAGIC(0): Virtual size is 800x600 (pitch 800)
(**) NEOMAGIC(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) NEOMAGIC(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 
+hsync +vsync
(**) NEOMAGIC(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) NEOMAGIC(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 - 
hsync -vsync
(==) NEOMAGIC(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.0.0
       ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 1.0.0
       ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
       compiled for 4.2.1.1, module version = 0.1.0
       ABI class: XFree86 Video Driver, version 0.5
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
       [0] 0 0 0x09000000 - 0x090fffff (0x100000) MX[B]
       [1] 0 0 0x09200000 - 0x093fffff (0x200000) MX[B]
       [2] 0 0 0x08000000 - 0x08ffffff (0x1000000) MX[B]
       [3] -1 0        0xffe00000 - 0xffffffff (0x200000) MX[B](B)
       [4] -1 0        0x00100000 - 0x07ffffff (0x7f00000) MX[B]E(B)
       [5] -1 0        0x000f0000 - 0x000fffff (0x10000) MX[B]
       [6] -1 0        0x000c0000 - 0x000effff (0x30000) MX[B]
       [7] -1 0        0x00000000 - 0x0009ffff (0xa0000) MX[B]
       [8] -1 0        0x09000000 - 0x090fffff (0x100000) MX[B](B)
       [9] -1 0        0x09200000 - 0x093fffff (0x200000) MX[B](B)
       [10] -1 0       0x08000000 - 0x08ffffff (0x1000000) MX[B](B)
       [11] 0 0        0x000a0000 - 0x000affff (0x10000) MS[B]
       [12] 0 0        0x000b0000 - 0x000b7fff (0x8000) MS[B]
       [13] 0 0        0x000b8000 - 0x000bffff (0x8000) MS[B]
       [14] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
       [15] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
       [16] -1 0       0x00009000 - 0x0000901f (0x20) IX[B]
       [17] -1 0       0x0000fcf0 - 0x0000fcff (0x10) IX[B]
       [18] 0 0        0x000003b0 - 0x000003bb (0xc) IS[B]
       [19] 0 0        0x000003c0 - 0x000003df (0x20) IS[B]
(WW) System lacks support for changing MTRRs
(II) NEOMAGIC(0): Stretching disabled
(II) NEOMAGIC(0): Using linear framebuffer at: 0x08000000
(--) NEOMAGIC(0): 1137152 bytes off-screen memory available
(II) NEOMAGIC(0): Using H/W Cursor.
(II) NEOMAGIC(0): Using 424 scanlines of offscreen memory
(II) NEOMAGIC(0): Using XFree86 Acceleration Architecture (XAA)
       Screen to screen bit blits
       Solid filled rectangles
       Solid Horizontal and Vertical Lines
       Offscreen Pixmaps
       Setting up tile and stipple cache:
               18 128x128 slots
(II) NEOMAGIC(0): Acceleration  Initialized
(==) NEOMAGIC(0): Backing store disabled
(==) NEOMAGIC(0): Silken mouse enabled
(**) Option "dpms"
(**) NEOMAGIC(0): DPMS enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "PS/2"
(**) Configured Mouse: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/psaux"
(EE) xf86OpenSerial: Cannot open device /dev/psaux
       No such device.
(EE) Configured Mouse: cannot open input device
(EE) PreInit failed for input device "Configured Mouse"
(II) UnloadModule: "mouse"
(**) Option "Protocol" "ImPS/2"
(**) Generic Mouse: Protocol: "ImPS/2"
(**) Option "SendCoreEvents" "true"
(**) Generic Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(EE) xf86OpenSerial: Cannot open device /dev/input/mice
       No such device.
(EE) Generic Mouse: cannot open input device
(EE) PreInit failed for input device "Generic Mouse"
(II) UnloadModule: "mouse"
(WW) No core pointer registered
Couldn't load XKB keymap, falling back to pre-XKB keymap
No core pointer

Fatal server error:
failed to initialize core devices

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.

===========end of /var/log/XFree86.0.log===============

===========start of output from dmesg================
Linux version 2.6.3-1-386 (herbert@gondolin) (gcc version 3.3.2 (Debian)) #2 Tue 
Feb 24 20:20:23 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000003fd0000 (usable)
BIOS-e820: 0000000003fd0000 - 0000000003fdf000 (ACPI data)
BIOS-e820: 0000000003fdf000 - 0000000003fe0000 (ACPI NVS)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
63MB LOWMEM available.
On node 0 totalpages: 16336
 DMA zone: 4096 pages, LIFO batch:1
 Normal zone: 12240 pages, LIFO batch:2
 HighMem zone: 0 pages, LIFO batch:1
DMI 2.0 present.
ACPI disabled because your bios is from 99 and too old
You can enable it with acpi=force
IBM machine detected. Enabling interrupts during APM calls.
IBM machine detected. Disabling SMBus accesses.
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Linux ro root=302
No local APIC present or hardware disabled
Initializing CPU#0
PID hash table entries: 256 (order 8: 2048 bytes)
Detected 231.811 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 57544k/65344k available (1314k kernel code, 7340k reserved, 657k data, 2 
04k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 456.70 BogoMIPS
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd 
Freeing initrd memory: 4296k freed
CPU:     After generic identify, caps: 008001bf 00000000 00000000 00000000
CPU:     After vendor identify, caps: 008001bf 00000000 00000000 00000000
Intel Pentium with F0 0F bug - workaround enabled.
CPU:     After all inits, caps: 008001bf 00000000 00000000 00000000
CPU: Intel Mobile Pentium MMX stepping 01
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=0
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040116
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fe700
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe724, dseg 0xf0000
pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0a: ioport range 0x15e0-0x15ef has been reserved
pnp: 00:0a: ioport range 0xef00-0xefaf has been reserved
PnPBIOS: 20 nodes reported by PnP BIOS; 20 recorded by driver
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Address space collision on region 7 of bridge 0000:00:01.3 [ef00:ef3f]
PCI: Address space collision on region 8 of bridge 0000:00:01.3 [efa0:efbf]
PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:01.0
PCI: IRQ 0 for device 0000:00:02.0 doesn't match PIRQ mask - try pci=usepirqmask 
PCI: Found IRQ 11 for device 0000:00:02.0
PCI: Sharing IRQ 11 with 0000:00:03.0
PCI: IRQ 0 for device 0000:00:02.1 doesn't match PIRQ mask - try pci=usepirqmask 
PCI: Found IRQ 11 for device 0000:00:02.1
VFS: Disk quotas dquot_6.5.1
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
pty: 256 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
pnp: Device 00:0d activated.
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET: Registered protocol family 8
NET: Registered protocol family 20
PM: Reading pmdisk image.
PM: Resume from disk failed.
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4296 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 204k freed
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:01.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
   ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio
hda: IBM-DTCA-24090, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 8007552 sectors (4099 MB) w/468KiB Cache, CHS=7944/16/63, UDMA(33)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
SCSI subsystem initialized
libata version 1.00 loaded.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 189464k swap on /dev/hda1.  Priority:-1 extents:1
EXT3 FS on hda2, internal journal
Real Time Clock Driver v1.12
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/core/usb.c: registered new driver usbkbd
drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Initializing USB Mass Storage driver...
drivers/usb/core/usb.c: registered new driver usb-storage
USB Mass Storage support registered.
drivers/usb/core/usb.c: registered new driver hiddev
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
drivers/usb/core/usb.c: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux Kernel Card Services
 options:  [pci] [cardbus] [pm]
Intel ISA PCIC probe: not found.
input: PS/2 Generic Mouse on isa0060/serio1
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). 
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). 
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). 
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). 
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). 
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). 
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). 
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). 
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
==============end of output from dmesg===============

_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar ? get it now! http://clk.atdmt.com/AVE/go/onm00200415ave/direct/01/

--- End Message ---
--- Begin Message --- 
Closing this bug since people involved (either submitter or confirmers)
either have an invalid address, or did not reply to my ping a couple
weeks ago, or don't have the hardware anymore to try to reproduce. If
anybody ever reproduces this problem, feel free to reopen.

Brice

--- End Message ---
Reply to: