[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#283259: marked as done (installation-reports: [install report] wrong mouse driver in /etc/XF86Config-4)

Your message dated Thu, 11 Jan 2007 22:09:25 +0100
with message-id <45A6A785.4000008@ens-lyon.org>
and subject line Bug#283259: installation-reports: [install report] wrong mouse driver in /etc/XF86Config-4
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: installation-reports
Severity: important

Package: installation-reports 

Debian-installer-version: 
sarge-i386-netinst.iso from d-i site (Oct 20 2004 00:32 107M)

uname -a: 
Linux garth 2.6.8-1-k7 #1 Thu Nov 11 12:47:56 EST 2004 i686 GNU/Linux

Date: (of install) Wed Oct 20 18:00 UTC 2004

Method: I booted the latest netinst image available and used a PPP 
connection for installation, via an old RTC modem (56kbps), my remote 
internet provider being 'Le Neuf' (unproxied, dynamic DNS, dynamic IP)

Machine: Custom IBM compatible PC with obsolecent, old and more recent 
hardware mixed together

Processor: AMD Athlon 1700+ (running at 1100 MHz only)

Memory: 256 MB - DDR SDRAM (PC3100 I think)

Root Device: LVM logical volume on an IDE disk.

Root Size/partition table:

  Output of pvs:
    PV         VG   Fmt  Attr PSize  PFree
    /dev/hdc1  main lvm2 a-   18,64G    0 
  Output of lvs:
    LV   VG   Attr   LSize   Origin Snap%  Move Copy% 
    home main -wi-ao  10,00G                          
    root main -wi-ao   3,14G                          
    swap main -wi-ao 512,00M                          
    usr  main -wi-ao   5,00G                          	    
  Output lvdisplay main:
    --- Logical volume ---
    LV Name                /dev/main/swap
    VG Name                main
    LV UUID                aJ1XAs-c2K2-F8tX-hCSR-h6M2-segF-FkBjub
    LV Write Access        read/write
    LV Status              available
    # open                 1
    LV Size                512,00 MB
    Current LE             128
    Segments               1
    Allocation             inherit
    Read ahead sectors     0
    Block device           254:0
     
    --- Logical volume ---
    LV Name                /dev/main/home
    VG Name                main
    LV UUID                PIPmHq-vR43-853f-40X0-u7R2-9f3e-NE0WCf
    LV Write Access        read/write
    LV Status              available
    # open                 1
    LV Size                10,00 GB
    Current LE             2560
    Segments               1
    Allocation             inherit
    Read ahead sectors     0
    Block device           254:1
     
    --- Logical volume ---
    LV Name                /dev/main/usr
    VG Name                main
    LV UUID                TwF5Ew-FT14-Axtt-4Seu-I9e0-gmYK-oyjD4T
    LV Write Access        read/write
    LV Status              available
    # open                 1
    LV Size                5,00 GB
    Current LE             1280
    Segments               1
    Allocation             inherit
    Read ahead sectors     0
    Block device           254:2
     
    --- Logical volume ---
    LV Name                /dev/main/root
    VG Name                main
    LV UUID                kHwZGB-wUE9-yQ6z-iMk2-sleO-oI86-i674V9
    LV Write Access        read/write
    LV Status              available
    # open                 1
    LV Size                3,14 GB
    Current LE             805
    Segments               1
    Allocation             inherit
    Read ahead sectors     0
    Block device           254:3

  Output of mount:
  /dev/mapper/main-root on / type ext3 (rw,errors=remount-ro)
  proc on /proc type proc (rw)
  sysfs on /sys type sysfs (rw)
  devpts on /dev/pts type devpts (rw,gid=5,mode=620)
  tmpfs on /dev/shm type tmpfs (rw)
  /dev/mapper/main-home on /home type ext3 (rw)
  /dev/mapper/main-usr on /usr type ext3 (rw)
  /dev/hda1 on /mnt/xp type ntfs (ro,noexec,iocharset=iso8859-15,gid=1001,umask=07227)
  /dev/hda2 on /mnt/data type ntfs (ro,noexec,iocharset=iso8859-15,gid=1001,umask=07227)
  usbfs on /proc/bus/usb type usbfs (rw)
  
Output of lspci and lspci -n:
# lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
0000:00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
0000:00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07)
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:00:0f.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 11)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV4 [RIVA TNT] (rev 04)
# lspci -n
0000:00:00.0 0600: 1039:0735 (rev 01)
0000:00:01.0 0604: 1039:0001
0000:00:02.0 0601: 1039:0018
0000:00:02.1 0c05: 1039:0016
0000:00:02.2 0c03: 1039:7001 (rev 07)
0000:00:02.3 0c03: 1039:7001 (rev 07)
0000:00:02.5 0101: 1039:5513 (rev d0)
0000:00:02.7 0401: 1039:7012 (rev a0)
0000:00:0b.0 0200: 10ec:8139 (rev 10)
0000:00:0f.0 0400: 109e:0350 (rev 11)
0000:01:00.0 0300: 10de:0020 (rev 04)

Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O] 
Configure network HW:   [ ] 
Config network:         [O] 
Detect CD:              [O] 
Load installer modules: [O] 
Detect hard drives:     [O] 
Partition hard drives:  [O] 
Create file systems:    [O] 
Mount partitions:       [O] 
Install base system:    [O] 
Install boot loader:    [O] 
Reboot:                 [O]

Comments/Problems:
My computer currently does not have any network adapter so that there were no 
network HW to configure, and network configuration resumed to choose a 
hostname.

xserver-xfree86 configuration selected 'IntelliMouse' protocol for my mouse 
(whithout asking me) whereas the only working protocol for it is 'ImPS/2': I
had to modify /etc/X11/XF86Config-4 by hand, so that we can't say that 
everything worked "out of the box".

That's all folks,
Lionel.

--- End Message ---
--- Begin Message --- 
Closing, as suggested by the submitter below.

Brice





Lionel VAUX wrote:
>> About 2 years ago, you reported a bug to the Debian BTS regarding a
>> wrong mouse driver in XF86Config-4 after a beta netinst of Sarge. Did
>> you reproduce the problem recently? If not, I will close the bug in the
>> next weeks.
>>     
>
> I installed etch on a new computer recently, and this bug did not 
> occur, so that's ok.
>
> Cheers,
> Lionel.
>

--- End Message ---
Reply to: