--- Begin Message ---
Package: kdm
Version: 4:3.5.5a.dfsg.1-1
Severity: important
Last night I dist-upgraded my unstable and this pulled Xorg 7.1.
Prior to that I was running Xorg 7.0. After the upgrade finished
I encountered a bizarre consequence. Upon starting the system
kdm runs fine and I login. However, after quitting, the kdm
login screen does not appear and I am dumped to a console. If I
stop kdm and start it again, the login screen appears and I
can login fine but after exiting again the same thing happens.
Every time I logout, kdm cannot restart.
Here is the tail of kdm.log that has relevant information
(==) Using config file: "/etc/X11/xorg.conf"
[10e] 320 x 200, 70Hz
[133] 320 x 240, 85Hz, 75Hz, 72Hz, 60Hz
[143] 400 x 300, 85Hz, 75Hz, 72Hz, 60Hz
[153] 512 x 384, 85Hz, 75Hz, 70Hz, 60Hz
[11d] 640 x 400, 85Hz, 70Hz
[111] 640 x 480, 160Hz, 85Hz, 75Hz, 72Hz, 60Hz
[173] 720 x 480, 60Hz
[114] 800 x 600, 160Hz, 85Hz, 75Hz, 72Hz, 60Hz
[117] 1024 x 768, 130Hz, 85Hz, 75Hz, 70Hz, 60Hz
[163] 1152 x 864, 75Hz
[11a] 1280 x 1024, 100Hz, 85Hz, 75Hz, 60Hz
[122] 1600 x 1200, 85Hz, 75Hz, 60Hz
[138] 1920 x 1440, 60Hz
xkb_keycodes { include "xfree86+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+us" };
xkb_geometry { include "pc(pc104)" };
QImage::convertDepth: Image is a null image
QImage::smoothScale: Image is a null image
Link points to "/var/tmp/kdecache-root"
FreeFontPath: FPE "unix/:7100" refcount is 2, should be 1; fixing.
(EE) SAVAGE(0): [drm] DRIScreenInit failed. Disabling DRI.
(EE) SAVAGE(0): DRI isn't enabled
(EE) AIGLX: Screen 0 is not DRI capable
xkb_keycodes { include "xfree86+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+us" };
xkb_geometry { include "pc(pc104)" };
Backtrace:
0: /usr/X11R6/bin/X(xf86SigHandler+0x84) [0x80c4354]
1: [0xffffe420]
2: /usr/lib/xorg/modules/drivers/savage_drv.so [0xb7c04afd]
3: /usr/lib/xorg/modules/libramdac.so(xf86SetCursor+0x10b) [0xafa366db]
4: /usr/lib/xorg/modules/libramdac.so [0xafa35d43]
5: /usr/X11R6/bin/X(miPointerUpdate+0x167) [0x8112be7]
6: /usr/X11R6/bin/X [0x8112cf9]
7: /usr/X11R6/bin/X [0x812921e]
8: /usr/X11R6/bin/X [0x814e953]
9: /usr/X11R6/bin/X(DefineInitialRootWindow+0x11e) [0x808f80e]
10: /usr/X11R6/bin/X(main+0x455) [0x806e665]
11: /lib/tls/libc.so.6(__libc_start_main+0xc8) [0xb7d94ea8]
12: /usr/X11R6/bin/X(FontFileCompleteXLFD+0xa9) [0x806d9d1]
Fatal server error:
Caught signal 11. Server aborting
*******************************************************************
However, DRI is enabled even though kdm seems to claim it is not. I can tell
this both from glxinfo and looking at Xorg.0.log.
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method,
GLX_SGIS_multisample, GLX_SGIX_fbconfig
OpenGL vendor string: S3 Graphics Inc.
OpenGL renderer string: Mesa DRI Savage4 20050829 AGP 1x
OpenGL version string: 1.2 Mesa 6.5.1
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
GL_ARB_texture_compression, GL_ARB_texture_env_add,
GL_ARB_texture_mirrored_repeat, GL_ARB_transpose_matrix,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_histogram, GL_EXT_packed_pixels,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_stencil_wrap, GL_EXT_subtexture,
GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_compression_s3tc,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_vertex_array,
GL_APPLE_packed_pixels, GL_IBM_rasterpos_clip,
GL_IBM_texture_mirrored_repeat, GL_MESA_window_pos,
GL_NV_light_max_exponent, GL_NV_texgen_reflection, GL_OES_read_format,
GL_SGI_color_matrix, GL_SGI_color_table, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_S3_s3tc
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
****************************************************************
And Xorg.0.log (which I edited for brevity. I could send the entire
file if necessary.
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux ta-koro 2.6.15.1.02222006 #1 PREEMPT Wed Feb
22 21:33:24 EST 2006 i686
Build Date: 07 July 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 16 21:10:16 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Samsung 930b"
(**) | |-->Device "S3 Inc. Savage 4"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.1.1, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "savage"
(II) Loading /usr/lib/xorg/modules/drivers/savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 2.1.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) SAVAGE: driver (version 2.1.2) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is: PCI 01:00:0
(--) Chipset Savage4 found
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(**) SAVAGE(0): Depth 16, (--) framebuffer bpp 16
(==) SAVAGE(0): RGB weight 565
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0x0000
(==) SAVAGE(0): Using XAA acceleration architecture
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules/libvbe.so
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 2.0
(II) SAVAGE(0): VESA VBE Total Mem: 8192 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Savage4
(II) SAVAGE(0): VESA VBE OEM Software Rev: 1.1
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: Savage4
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev B
(--) SAVAGE(0): Chip: id 8a22, "Savage4"
(--) SAVAGE(0): Engine: "Savage4"
(--) SAVAGE(0): AGP card detected
(==) SAVAGE(0): Using AGP DMA
(==) SAVAGE(0): Will try command and vertex DMA mode
(==) SAVAGE(0): Using AGP 1x mode
(==) SAVAGE(0): Using 16 MB AGP aperture
(==) SAVAGE(0): Write-combining range (0xc0000000,0x8000000)
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram: 8192k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" removed.
(II) SAVAGE(0): Manufacturer: SAM Model: 193 Serial#: 1112092985
(II) SAVAGE(0): Year: 2005 Week: 28
(II) SAVAGE(0): EDID Version: 1.3
(II) SAVAGE(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) SAVAGE(0): Sync: Separate Composite SyncOnGreen
(II) SAVAGE(0): Max H-Image Size [cm]: horiz.: 38 vert.: 30
(II) SAVAGE(0): Gamma: 2.20
(II) SAVAGE(0): DPMS capabilities: Off; RGB/Color Display
(II) SAVAGE(0): First detailed timing is preferred mode
(II) SAVAGE(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
(II) SAVAGE(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) SAVAGE(0): Supported VESA Video Modes:
(II) SAVAGE(0): 720x400@70Hz
(II) SAVAGE(0): 640x480@60Hz
(II) SAVAGE(0): 640x480@67Hz
(II) SAVAGE(0): 640x480@72Hz
(II) SAVAGE(0): 640x480@75Hz
(II) SAVAGE(0): 800x600@56Hz
(II) SAVAGE(0): 800x600@60Hz
(II) SAVAGE(0): 800x600@72Hz
(II) SAVAGE(0): 800x600@75Hz
(II) SAVAGE(0): 832x624@75Hz
(II) SAVAGE(0): 1024x768@60Hz
(II) SAVAGE(0): 1024x768@70Hz
(II) SAVAGE(0): 1024x768@75Hz
(II) SAVAGE(0): 1280x1024@75Hz
(II) SAVAGE(0): 1152x870@75Hz
(II) SAVAGE(0): Manufacturer's mask: 0
(II) SAVAGE(0): Supported Future Video Modes:
(II) SAVAGE(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) SAVAGE(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) SAVAGE(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) SAVAGE(0): Supported additional Video Mode:
(II) SAVAGE(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) SAVAGE(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) SAVAGE(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) SAVAGE(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz,
PixClock max 140 MHz
(II) SAVAGE(0): Monitor name: SyncMaster
(II) SAVAGE(0): Serial No: HMEY709193
(--) SAVAGE(0): Detected current MCLK value of 125.284 MHz
(--) SAVAGE(0): Found 13 modes at this depth:
[10e] 320 x 200, 70Hz
[133] 320 x 240, 85Hz, 75Hz, 72Hz, 60Hz
[143] 400 x 300, 85Hz, 75Hz, 72Hz, 60Hz
[153] 512 x 384, 85Hz, 75Hz, 70Hz, 60Hz
[11d] 640 x 400, 85Hz, 70Hz
[111] 640 x 480, 160Hz, 85Hz, 75Hz, 72Hz, 60Hz
[173] 720 x 480, 60Hz
[114] 800 x 600, 160Hz, 85Hz, 75Hz, 72Hz, 60Hz
[117] 1024 x 768, 130Hz, 85Hz, 75Hz, 70Hz, 60Hz
[163] 1152 x 864, 75Hz
[11a] 1280 x 1024, 100Hz, 85Hz, 75Hz, 60Hz
[122] 1600 x 1200, 85Hz, 75Hz, 60Hz
[138] 1920 x 1440, 60Hz
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.2.0
ABI class: X.Org Video Driver, version 1.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.0
(II) do I need RAC? No, I don't.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 2.0
(II) SAVAGE(0): VESA VBE Total Mem: 8192 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. Savage4
(II) SAVAGE(0): VESA VBE OEM Software Rev: 1.1
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: Savage4
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev B
(II) SAVAGE(0): 7812 kB of Videoram needed for 3D; 8192 kB of Videoram
available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) SAVAGE(0): [drm] DRM interface version 1.2
(II) SAVAGE(0): [drm] created "savage" driver at busid "pci:0000:01:00.0"
(II) SAVAGE(0): [drm] added 8192 byte SAREA at 0xf907f000
(II) SAVAGE(0): [drm] mapped SAREA 0xf907f000 to 0xb7f18000
(II) SAVAGE(0): [drm] framebuffer handle = 0xc0000000
(II) SAVAGE(0): [drm] added 1 reserved context for kernel
(II) SAVAGE(0): [agp] Mode 0x1f000201 [AGP 0x1039/0x0735; Card 0x5333/0x8a22]
(II) SAVAGE(0): [agp] 16384 kB allocated with handle 0x00000001
(II) SAVAGE(0): [agp] command DMA handle = 0xd0000000
(II) SAVAGE(0): [agp] agpTextures handle = 0xd0100000
(II) SAVAGE(0): [drm] aperture handle = 0xc2000000
(II) SAVAGE(0): [drm] Enabling ShadowStatus for DRI.
(II) SAVAGE(0): [drm] Status handle = 0x3636d000
(II) SAVAGE(0): [drm] Status page mapped at 0xaf9be000
(II) SAVAGE(0): [dri] visual configs initialized
(**) SAVAGE(0): DRI is enabled
(--) SAVAGE(0): Chose mode 11a at 60Hz.
(II) SAVAGE(0): virtualX:1280,virtualY:1024
(II) SAVAGE(0): bpp:16,tiledwidthBytes:2560,tiledBufferSize:2621440
(II) SAVAGE(0): bpp:16,widthBytes:2560,BufferSize:2621440
(II) SAVAGE(0): videoRambytes:0x00800000
(II) SAVAGE(0): textureSize:0xffe5f000
(II) SAVAGE(0): textureSize:0x00000000
(II) SAVAGE(0): textureOffset:0x007df000
(II) SAVAGE(0): depthOffset:0x0055f000,depthPitch:2560
(II) SAVAGE(0): backOffset:0x002df000,backPitch:2560
(II) SAVAGE(0): Reserved back buffer at offset 0x2df000
(II) SAVAGE(0): Reserved depth buffer at offset 0x55f000
(II) SAVAGE(0): Reserved 0 kb for textures at offset 0x7df000
(II) SAVAGE(0): Using 151 lines for offscreen memory.
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
10 128x128 slots
(==) SAVAGE(0): Backing store disabled
(**) Option "dpms"
(II) SAVAGE(0): Direct rendering enabled
(WW) SAVAGE(0): Option "UseFBDev" is not used
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x22
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(II) AIGLX: Loaded and initialized /usr/lib/dri/savage_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Generic Keyboard: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Generic Keyboard: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
xkb_keycodes { include "xfree86+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compatibility { include "complete" };
xkb_symbols { include "pc(pc105)+us" };
xkb_geometry { include "pc(pc104)" };
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from
list!
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) AIGLX: Resuming AIGLX clients after VT switch
(--) SAVAGE(0): Chose mode 11a at 60Hz.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) AIGLX: Resuming AIGLX clients after VT switch
(--) SAVAGE(0): Chose mode 11a at 60Hz.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) AIGLX: Resuming AIGLX clients after VT switch
(--) SAVAGE(0): Chose mode 11a at 60Hz.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) AIGLX: Resuming AIGLX clients after VT switch
(--) SAVAGE(0): Chose mode 11a at 60Hz.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) AIGLX: Resuming AIGLX clients after VT switch
(--) SAVAGE(0): Chose mode 11a at 60Hz.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) AIGLX: Resuming AIGLX clients after VT switch
(--) SAVAGE(0): Chose mode 11a at 60Hz.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) AIGLX: Resuming AIGLX clients after VT switch
(--) SAVAGE(0): Chose mode 11a at 60Hz.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) AIGLX: Resuming AIGLX clients after VT switch
(--) SAVAGE(0): Chose mode 11a at 60Hz.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) AIGLX: Resuming AIGLX clients after VT switch
(--) SAVAGE(0): Chose mode 11a at 60Hz.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) AIGLX: Resuming AIGLX clients after VT switch
(--) SAVAGE(0): Chose mode 11a at 60Hz.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Open APM successful
(II) AIGLX: Resuming AIGLX clients after VT switch
(--) SAVAGE(0): Chose mode 11a at 60Hz.
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch
*********************************************************************************
I hope this is not too long and can be understood.
I can add that I have worked around it in the meantime by
changing to gdm. Both it and xdm start properly and restart when logging
out of my KDE session. It turns out only kdm (which is the desktop
manager I happen to have always used ) is the only one with the problem.
Any ideas that anyone has would be greatly appreciated.
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15.1.02222006
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Versions of packages kdm depends on:
ii debconf [debconf-2.0] 1.5.8 Debian configuration management
sy
ii kdebase-bin 4:3.5.5a.dfsg.1-1 core binaries for the KDE base
mod
ii kdebase-data 4:3.5.5a.dfsg.1-1 shared data files for the KDE
base
ii kdelibs4c2a 4:3.5.5a.dfsg.1-3 core libraries and binaries for
al
ii libc6 2.3.6.ds1-8 GNU C Library: Shared libraries
ii libgcc1 1:4.1.1-19 GCC support library
ii libpam-runtime 0.79-4 Runtime support for the PAM
librar
ii libpam0g 0.79-4 Pluggable Authentication Modules
l
ii libqt3-mt 3:3.3.7-1 Qt GUI Library (Threaded runtime
v
ii libstdc++6 4.1.1-19 The GNU Standard C++ Library v3
ii libx11-6 2:1.0.3-2 X11 client-side library
ii libxau6 1:1.0.1-2 X11 authorisation library
ii libxdmcp6 1:1.0.1-2 X11 Display Manager Control
Protoc
ii libxtst6 1:1.0.1-5 X11 Testing -- Resource extension
ii xbase-clients 1:7.1.ds-3 miscellaneous X clients
Versions of packages kdm recommends:
ii logrotate 3.7.1-3 Log rotation utility
-- debconf information:
kdm/stop_running_server_with_children: false
* shared/default-x-display-manager: gdm
kdm/daemon_name: /usr/bin/kdm
--
George Lengel
"Kohli head. You could have been lava bones"
--- End Message ---