X Strike Force X.Org X11 SVN commit: r4062 - in trunk/driver/xserver-xorg-video-s3: . debian debian/patches src
Author: dnusinow
Date: 2006-11-25 14:06:50 -0500 (Sat, 25 Nov 2006)
New Revision: 4062
Modified:
trunk/driver/xserver-xorg-video-s3/Makefile.in
trunk/driver/xserver-xorg-video-s3/aclocal.m4
trunk/driver/xserver-xorg-video-s3/config.h.in
trunk/driver/xserver-xorg-video-s3/configure
trunk/driver/xserver-xorg-video-s3/debian/changelog
trunk/driver/xserver-xorg-video-s3/debian/patches/01_enable_new_mmio.diff
trunk/driver/xserver-xorg-video-s3/src/Makefile.in
Log:
* Replace old 01_enable_new_mmio.diff with new patch that doesn't break old
chips that don't have the new mmio scheme. Thanks Eugene Konev for
pointing out the problem and Evgeny M. Zubok for writing the patch.
Closes: #377386
Modified: trunk/driver/xserver-xorg-video-s3/Makefile.in
===================================================================
--- trunk/driver/xserver-xorg-video-s3/Makefile.in 2006-11-25 18:08:59 UTC (rev 4061)
+++ trunk/driver/xserver-xorg-video-s3/Makefile.in 2006-11-25 19:06:50 UTC (rev 4062)
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -33,15 +33,11 @@
# ADAM JACKSON BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -55,17 +51,17 @@
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
+subdir = .
DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.h.in \
$(top_srcdir)/configure COPYING ChangeLog config.guess \
config.sub depcomp install-sh ltmain.sh missing mkinstalldirs
-subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
+ configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
@@ -73,10 +69,13 @@
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
- install-exec-recursive install-info-recursive \
- install-recursive installcheck-recursive installdirs-recursive \
- pdf-recursive ps-recursive uninstall-info-recursive \
- uninstall-recursive
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
@@ -94,8 +93,6 @@
ACLOCAL = @ACLOCAL@
ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
APP_MAN_DIR = @APP_MAN_DIR@
APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
@@ -130,6 +127,7 @@
FILE_MAN_DIR = @FILE_MAN_DIR@
FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
GREP = @GREP@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -143,11 +141,10 @@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MISC_MAN_DIR = @MISC_MAN_DIR@
MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
+MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
@@ -164,13 +161,13 @@
VERSION = @VERSION@
XORG_CFLAGS = @XORG_CFLAGS@
XORG_LIBS = @XORG_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -182,6 +179,7 @@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
+builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
@@ -210,8 +208,11 @@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = foreign
SUBDIRS = src
all: config.h
@@ -255,7 +256,7 @@
config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
- $(MAKE) stamp-h1; \
+ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@@ -277,7 +278,6 @@
distclean-libtool:
-rm -f libtool
-uninstall-info-am:
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
@@ -310,8 +310,7 @@
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
+$(RECURSIVE_CLEAN_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
@@ -413,23 +412,22 @@
distdir: $(DISTFILES)
$(am__remove_distdir)
- mkdir $(distdir)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
+ test -d $(distdir) || mkdir $(distdir)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
@@ -443,7 +441,7 @@
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
- || $(mkdir_p) "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
@@ -451,6 +449,8 @@
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
distdir) \
|| exit 1; \
fi; \
@@ -458,7 +458,7 @@
-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
- ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r $(distdir)
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
@@ -533,7 +533,7 @@
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
- sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@cd $(distuninstallcheck_dir) \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
@@ -603,12 +603,20 @@
install-data-am:
+install-dvi: install-dvi-recursive
+
install-exec-am:
+install-html: install-html-recursive
+
install-info: install-info-recursive
install-man:
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
installcheck-am:
maintainer-clean: maintainer-clean-recursive
@@ -629,24 +637,26 @@
ps-am:
-uninstall-am: uninstall-info-am
+uninstall-am:
-uninstall-info: uninstall-info-recursive
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+ install-strip
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
- check-am clean clean-generic clean-libtool clean-recursive \
- ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
- dist-shar dist-tarZ dist-zip distcheck distclean \
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am am--refresh check check-am clean clean-generic \
+ clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
+ dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \
distclean-generic distclean-hdr distclean-libtool \
- distclean-recursive distclean-tags distcleancheck distdir \
- distuninstallcheck dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
- install-strip installcheck installcheck-am installdirs \
- installdirs-am maintainer-clean maintainer-clean-generic \
- maintainer-clean-recursive mostlyclean mostlyclean-generic \
- mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
- tags tags-recursive uninstall uninstall-am uninstall-info-am
+ distclean-tags distcleancheck distdir distuninstallcheck dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs installdirs-am \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-recursive uninstall uninstall-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
Modified: trunk/driver/xserver-xorg-video-s3/aclocal.m4
===================================================================
--- trunk/driver/xserver-xorg-video-s3/aclocal.m4 2006-11-25 18:08:59 UTC (rev 4061)
+++ trunk/driver/xserver-xorg-video-s3/aclocal.m4 2006-11-25 19:06:50 UTC (rev 4062)
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+# generated automatically by aclocal 1.10 -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005 Free Software Foundation, Inc.
+# 2005, 2006 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -11,6 +11,11 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
+m4_if(m4_PACKAGE_VERSION, [2.60a],,
+[m4_fatal([this file was generated for autoconf 2.60a.
+You have another version of autoconf. If you want to use that,
+you should regenerate the build system entirely.], [63])])
+
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL
@@ -6731,18 +6736,17 @@
# Whether or not the necessary tools and files are found can be checked
# with the AM_CONDITIONAL "BUILD_LINUXDOC"
AC_DEFUN([XORG_CHECK_LINUXDOC],[
-AC_CHECK_FILE(
- [$prefix/share/X11/sgml/defs.ent],
- [DEFS_ENT_PATH=$prefix/share/X11/sgml],
- [DEFS_ENT_PATH=]
-)
+XORG_SGML_PATH=$prefix/share/sgml
+HAVE_DEFS_ENT=
+AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+
AC_PATH_PROG(LINUXDOC, linuxdoc)
AC_PATH_PROG(PS2PDF, ps2pdf)
AC_MSG_CHECKING([Whether to build documentation])
-if test x$DEFS_ENT_PATH != x && test x$LINUXDOC != x ; then
+if test x$HAVE_DEFS_ENT != x && test x$LINUXDOC != x ; then
BUILDDOC=yes
else
BUILDDOC=no
@@ -6754,7 +6758,7 @@
AC_MSG_CHECKING([Whether to build pdf documentation])
-if test x$PS2PDF != x ; then
+if test x$PS2PDF != x && test x$BUILD_PDFDOC != xno; then
BUILDPDFDOC=yes
else
BUILDPDFDOC=no
@@ -6764,10 +6768,10 @@
AC_MSG_RESULT([$BUILDPDFDOC])
-MAKE_TEXT="SGML_SEARCH_PATH=$DEFS_ENT_PATH GROFF_NO_SGR=y $LINUXDOC -B txt"
-MAKE_PS="SGML_SEARCH_PATH=$DEFS_ENT_PATH $LINUXDOC -B latex --papersize=letter --output=ps"
+MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH GROFF_NO_SGR=y $LINUXDOC -B txt"
+MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B latex --papersize=letter --output=ps"
MAKE_PDF="$PS2PDF"
-MAKE_HTML="SGML_SEARCH_PATH=$DEFS_ENT_PATH $LINUXDOC -B html --split=0"
+MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $LINUXDOC -B html --split=0"
AC_SUBST(MAKE_TEXT)
AC_SUBST(MAKE_PS)
@@ -6775,6 +6779,72 @@
AC_SUBST(MAKE_HTML)
]) # XORG_CHECK_LINUXDOC
+# XORG_CHECK_DOCBOOK
+# -------------------
+# Minimum version: 1.0.0
+#
+# Checks for the ability to build output formats from SGML DocBook source.
+# For XXX in {TXT, PDF, PS, HTML}, the AM_CONDITIONAL "BUILD_XXXDOC"
+# indicates whether the necessary tools and files are found and, if set,
+# $(MAKE_XXX) blah.sgml will produce blah.xxx.
+AC_DEFUN([XORG_CHECK_DOCBOOK],[
+XORG_SGML_PATH=$prefix/share/sgml
+HAVE_DEFS_ENT=
+BUILDTXTDOC=no
+BUILDPDFDOC=no
+BUILDPSDOC=no
+BUILDHTMLDOC=no
+
+AC_CHECK_FILE([$XORG_SGML_PATH/X11/defs.ent], [HAVE_DEFS_ENT=yes])
+
+AC_PATH_PROG(DOCBOOKPS, docbook2ps)
+AC_PATH_PROG(DOCBOOKPDF, docbook2pdf)
+AC_PATH_PROG(DOCBOOKHTML, docbook2html)
+AC_PATH_PROG(DOCBOOKTXT, docbook2txt)
+
+AC_MSG_CHECKING([Whether to build text documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKTXT != x &&
+ test x$BUILD_TXTDOC != xno; then
+ BUILDTXTDOC=yes
+fi
+AM_CONDITIONAL(BUILD_TXTDOC, [test x$BUILDTXTDOC = xyes])
+AC_MSG_RESULT([$BUILDTXTDOC])
+
+AC_MSG_CHECKING([Whether to build PDF documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPDF != x &&
+ test x$BUILD_PDFDOC != xno; then
+ BUILDPDFDOC=yes
+fi
+AM_CONDITIONAL(BUILD_PDFDOC, [test x$BUILDPDFDOC = xyes])
+AC_MSG_RESULT([$BUILDPDFDOC])
+
+AC_MSG_CHECKING([Whether to build PostScript documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKPS != x &&
+ test x$BUILD_PSDOC != xno; then
+ BUILDPSDOC=yes
+fi
+AM_CONDITIONAL(BUILD_PSDOC, [test x$BUILDPSDOC = xyes])
+AC_MSG_RESULT([$BUILDPSDOC])
+
+AC_MSG_CHECKING([Whether to build HTML documentation])
+if test x$HAVE_DEFS_ENT != x && test x$DOCBOOKHTML != x &&
+ test x$BUILD_HTMLDOC != xno; then
+ BUILDHTMLDOC=yes
+fi
+AM_CONDITIONAL(BUILD_HTMLDOC, [test x$BUILDHTMLDOC = xyes])
+AC_MSG_RESULT([$BUILDHTMLDOC])
+
+MAKE_TEXT="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKTXT"
+MAKE_PS="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPS"
+MAKE_PDF="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKPDF"
+MAKE_HTML="SGML_SEARCH_PATH=$XORG_SGML_PATH $DOCBOOKHTML"
+
+AC_SUBST(MAKE_TEXT)
+AC_SUBST(MAKE_PS)
+AC_SUBST(MAKE_PDF)
+AC_SUBST(MAKE_HTML)
+]) # XORG_CHECK_DOCBOOK
+
# XORG_CHECK_MALLOC_ZERO
# ----------------------
# Minimum version: 1.0.0
@@ -6988,7 +7058,7 @@
fi
])
-# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -6998,14 +7068,29 @@
# ----------------------------
# Automake X.Y traces this macro to ensure aclocal.m4 has been
# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.10'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.10], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
# AM_SET_CURRENT_AUTOMAKE_VERSION
# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
- [AM_AUTOMAKE_VERSION([1.9.6])])
+[AM_AUTOMAKE_VERSION([1.10])dnl
+_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
@@ -7062,14 +7147,14 @@
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 7
+# serial 8
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
@@ -7078,8 +7163,10 @@
[AC_PREREQ(2.52)dnl
ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])
-AC_SUBST([$1_FALSE])
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
if $2; then
$1_TRUE=
$1_FALSE='#'
@@ -7093,15 +7180,14 @@
Usually this means the macro was only invoked conditionally.]])
fi])])
-
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 8
+# serial 9
# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
@@ -7129,6 +7215,7 @@
ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
[$1], CXX, [depcc="$CXX" am_compiler_list=],
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
[$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
[depcc="$$1" am_compiler_list=])
@@ -7194,6 +7281,7 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -7246,7 +7334,8 @@
AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
])
# Generate code to set up dependency tracking. -*- Autoconf -*-
@@ -7271,8 +7360,9 @@
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
dirpart=`AS_DIRNAME("$mf")`
else
continue
@@ -7331,8 +7421,8 @@
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -7355,16 +7445,20 @@
# arguments mandatory, and then we can depend on a new Autoconf
# release and drop the old call support.
AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
+[AC_PREREQ([2.60])dnl
dnl Autoconf wants to disallow AM_ names. We explicitly allow
dnl the ones we care about.
m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
fi
# test whether we have cygpath
@@ -7384,6 +7478,9 @@
AC_SUBST([PACKAGE], [$1])dnl
AC_SUBST([VERSION], [$2])],
[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
@@ -7419,6 +7516,10 @@
[_AM_DEPENDENCIES(CXX)],
[define([AC_PROG_CXX],
defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
])
])
@@ -7454,7 +7555,7 @@
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
AC_SUBST(install_sh)])
# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
@@ -7561,14 +7662,14 @@
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-# serial 4
+# serial 5
# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
@@ -7584,6 +7685,7 @@
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
@@ -7594,7 +7696,7 @@
fi
])
-# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -7602,60 +7704,23 @@
# AM_PROG_MKDIR_P
# ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-#
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake. There are at least two reasons why we must not
-# use `-m 0755':
-# - it causes special bits like SGID to be ignored,
-# - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out. Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
+# Check for `mkdir -p'.
AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
-else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
- else
- mkdir_p='$(install_sh) -d'
- fi
-fi
-AC_SUBST([mkdir_p])])
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
# Helper functions for option handling. -*- Autoconf -*-
@@ -7767,9 +7832,21 @@
if test "$cross_compiling" != no; then
AC_CHECK_TOOL([STRIP], [strip], :)
fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
+# Copyright (C) 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
# Check how to create a tarball. -*- Autoconf -*-
# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
Modified: trunk/driver/xserver-xorg-video-s3/config.h.in
===================================================================
--- trunk/driver/xserver-xorg-video-s3/config.h.in 2006-11-25 18:08:59 UTC (rev 4061)
+++ trunk/driver/xserver-xorg-video-s3/config.h.in 2006-11-25 19:06:50 UTC (rev 4062)
@@ -50,9 +50,6 @@
/* Define to the version of this package. */
#undef PACKAGE_VERSION
-/* Enable support for the new MMIO */
-#undef S3_NEWMMIO
-
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
Modified: trunk/driver/xserver-xorg-video-s3/configure
===================================================================
--- trunk/driver/xserver-xorg-video-s3/configure 2006-11-25 18:08:59 UTC (rev 4061)
+++ trunk/driver/xserver-xorg-video-s3/configure 2006-11-25 19:06:50 UTC (rev 4062)
@@ -794,6 +794,7 @@
INSTALL_PROGRAM
INSTALL_SCRIPT
INSTALL_DATA
+am__isrc
CYGPATH_W
PACKAGE
VERSION
@@ -1980,7 +1981,8 @@
-am__api_version="1.9"
+am__api_version='1.10'
+
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
@@ -2132,39 +2134,54 @@
echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
fi
-if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
- # We used to keeping the `.' as first argument, in order to
- # allow $(mkdir_p) to be used without argument. As in
- # $(mkdir_p) $(somedir)
- # where $(somedir) is conditionally defined. However this is wrong
- # for two reasons:
- # 1. if the package is installed by a user who cannot write `.'
- # make install will fail,
- # 2. the above comment should most certainly read
- # $(mkdir_p) $(DESTDIR)$(somedir)
- # so it does not work when $(somedir) is undefined and
- # $(DESTDIR) is not.
- # To support the latter case, we have to write
- # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
- # so the `.' trick is pointless.
- mkdir_p='mkdir -p --'
+{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; }
+if test -z "$MKDIR_P"; then
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
else
- # On NextStep and OpenStep, the `mkdir' command does not
- # recognize any option. It will interpret all options as
- # directories to create, and then abort because `.' already
- # exists.
- for d in ./-p ./--version;
- do
- test -d $d && rmdir $d
- done
- # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
- if test -f "$ac_aux_dir/mkinstalldirs"; then
- mkdir_p='$(mkinstalldirs)'
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+done
+IFS=$as_save_IFS
+
+fi
+
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
else
- mkdir_p='$(install_sh) -d'
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ test -d ./--version && rmdir ./--version
+ MKDIR_P="$ac_install_sh -d"
fi
fi
+{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+echo "${ECHO_T}$MKDIR_P" >&6; }
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
@@ -2246,12 +2263,16 @@
fi
rmdir .tst 2>/dev/null
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
- { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
{ (exit 1); exit 1; }; }
+ fi
fi
# test whether we have cygpath
@@ -2294,7 +2315,7 @@
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'. However `strip' might not be the right
@@ -2398,7 +2419,7 @@
fi
fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
@@ -2424,9 +2445,7 @@
{ echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
-
-
-if test $USE_MAINTAINER_MODE = yes; then
+ if test $USE_MAINTAINER_MODE = yes; then
MAINTAINER_MODE_TRUE=
MAINTAINER_MODE_FALSE='#'
else
@@ -2648,9 +2667,7 @@
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
+ if test "x$enable_dependency_tracking" != xno; then
AMDEP_TRUE=
AMDEP_FALSE='#'
else
@@ -2659,7 +2676,6 @@
fi
-
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -3731,6 +3747,7 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -3760,9 +3777,7 @@
echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-if
+ if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
am__fastdepCC_TRUE=
@@ -4414,7 +4429,7 @@
;;
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 4417 "configure"' > conftest.$ac_ext
+ echo '#line 4432 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
@@ -5813,6 +5828,7 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -5842,9 +5858,7 @@
echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
-
-
-if
+ if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
am__fastdepCXX_TRUE=
@@ -7378,11 +7392,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7381: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7395: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:7385: \$? = $ac_status" >&5
+ echo "$as_me:7399: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -7646,11 +7660,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7649: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7663: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:7653: \$? = $ac_status" >&5
+ echo "$as_me:7667: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -7750,11 +7764,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:7753: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:7767: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:7757: \$? = $ac_status" >&5
+ echo "$as_me:7771: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -10191,7 +10205,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 10194 "configure"
+#line 10208 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -10291,7 +10305,7 @@
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
-#line 10294 "configure"
+#line 10308 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -12659,11 +12673,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:12662: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:12676: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:12666: \$? = $ac_status" >&5
+ echo "$as_me:12680: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -12763,11 +12777,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:12766: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:12780: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:12770: \$? = $ac_status" >&5
+ echo "$as_me:12784: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -14324,11 +14338,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14327: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:14341: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:14331: \$? = $ac_status" >&5
+ echo "$as_me:14345: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -14428,11 +14442,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:14431: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:14445: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:14435: \$? = $ac_status" >&5
+ echo "$as_me:14449: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -16647,11 +16661,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16650: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16664: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:16654: \$? = $ac_status" >&5
+ echo "$as_me:16668: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -16915,11 +16929,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:16918: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:16932: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
- echo "$as_me:16922: \$? = $ac_status" >&5
+ echo "$as_me:16936: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings other than the usual output.
@@ -17019,11 +17033,11 @@
-e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:17022: $lt_compile\"" >&5)
+ (eval echo "\"\$as_me:17036: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
- echo "$as_me:17026: \$? = $ac_status" >&5
+ echo "$as_me:17040: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
@@ -20530,6 +20544,7 @@
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
@@ -20559,9 +20574,7 @@
echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
-
-
-if
+ if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
am__fastdepCC_TRUE=
@@ -21317,14 +21330,8 @@
-cat >>confdefs.h <<\_ACEOF
-#define S3_NEWMMIO 1
-_ACEOF
-
-
-
DRIVER_NAME=s3
@@ -21900,6 +21907,7 @@
ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
@@ -22108,6 +22116,7 @@
INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
INSTALL_DATA!$INSTALL_DATA$ac_delim
+am__isrc!$am__isrc$ac_delim
CYGPATH_W!$CYGPATH_W$ac_delim
PACKAGE!$PACKAGE$ac_delim
VERSION!$VERSION$ac_delim
@@ -22164,7 +22173,6 @@
CXXFLAGS!$CXXFLAGS$ac_delim
ac_ct_CXX!$ac_ct_CXX$ac_delim
CXXDEPMODE!$CXXDEPMODE$ac_delim
-am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
_ACEOF
if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
@@ -22206,6 +22214,7 @@
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
cat >conf$$subs.sed <<_ACEOF
+am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
CXXCPP!$CXXCPP$ac_delim
F77!$F77$ac_delim
@@ -22233,7 +22242,7 @@
LTLIBOBJS!$LTLIBOBJS$ac_delim
_ACEOF
- if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 25; then
+ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 26; then
break
elif $ac_last_try; then
{ { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
@@ -22460,6 +22469,11 @@
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
@@ -22513,6 +22527,7 @@
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
@@ -22677,8 +22692,9 @@
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
- # So let's grep whole file.
- if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$mf" : 'X\(//\)[^/]' \| \
Modified: trunk/driver/xserver-xorg-video-s3/debian/changelog
===================================================================
--- trunk/driver/xserver-xorg-video-s3/debian/changelog 2006-11-25 18:08:59 UTC (rev 4061)
+++ trunk/driver/xserver-xorg-video-s3/debian/changelog 2006-11-25 19:06:50 UTC (rev 4062)
@@ -1,12 +1,19 @@
xserver-xorg-video-s3 (1:0.4.1-5) UNRELEASED; urgency=low
+ [ Julien Cristau ]
* Add link to xserver-xorg-core bug script, so that bugreports contain
the user's config and log files.
* Bump dependency on xserver-xorg-core to >= 2:1.1.1-11, as previous
versions don't have the bug script.
- -- Julien Cristau <julien.cristau@ens-lyon.org> Tue, 7 Nov 2006 07:30:43 +0100
+ [ David Nusinow ]
+ * Replace old 01_enable_new_mmio.diff with new patch that doesn't break old
+ chips that don't have the new mmio scheme. Thanks Eugene Konev for
+ pointing out the problem and Evgeny M. Zubok for writing the patch.
+ Closes: #377386
+ -- David Nusinow <dnusinow@debian.org> Sat, 25 Nov 2006 13:59:27 -0500
+
xserver-xorg-video-s3 (1:0.4.1-4) unstable; urgency=low
[ Drew Parsons ]
Modified: trunk/driver/xserver-xorg-video-s3/debian/patches/01_enable_new_mmio.diff
===================================================================
--- trunk/driver/xserver-xorg-video-s3/debian/patches/01_enable_new_mmio.diff 2006-11-25 18:08:59 UTC (rev 4061)
+++ trunk/driver/xserver-xorg-video-s3/debian/patches/01_enable_new_mmio.diff 2006-11-25 19:06:50 UTC (rev 4062)
@@ -1,13 +1,23 @@
-Index: xserver-xorg-video-s3/configure.ac
-===================================================================
---- xserver-xorg-video-s3.orig/configure.ac 2006-10-07 21:53:23.000000000 -0400
-+++ xserver-xorg-video-s3/configure.ac 2006-10-07 21:53:46.000000000 -0400
-@@ -62,6 +62,8 @@
- # Checks for header files.
- AC_HEADER_STDC
+--- orig/src/Makefile.am 2006-11-24 22:49:28.000000000 +0000
++++ new/src/Makefile.am 2006-11-24 22:51:19.000000000 +0000
+@@ -30,7 +30,6 @@
-+AC_DEFINE(S3_NEWMMIO, 1, [Enable support for the new MMIO])
+ s3_drv_la_SOURCES = \
+ newmmio.h \
+- s3_accel.c \
+ s3_bios.c \
+ s3_cursor.c \
+ s3_dga.c \
+@@ -41,3 +40,12 @@
+ s3_Ti.c \
+ s3_Trio64DAC.c \
+ s3_video.c
+
- AC_SUBST([XORG_CFLAGS])
- AC_SUBST([moduledir])
-
++noinst_LTLIBRARIES = libs3_accel_newmmio.la libs3_accel_pio.la
++s3_drv_la_LIBADD = libs3_accel_newmmio.la libs3_accel_pio.la
++
++libs3_accel_newmmio_la_SOURCES = s3_accel.c
++libs3_accel_newmmio_la_CFLAGS = $(AM_CFLAGS) -DS3_NEWMMIO=1
++
++libs3_accel_pio_la_SOURCES = s3_accel.c
++libs3_accel_pio_la_CFLAGS = $(AM_CFLAGS)
Modified: trunk/driver/xserver-xorg-video-s3/src/Makefile.in
===================================================================
--- trunk/driver/xserver-xorg-video-s3/src/Makefile.in 2006-11-25 18:08:59 UTC (rev 4061)
+++ trunk/driver/xserver-xorg-video-s3/src/Makefile.in 2006-11-25 19:06:50 UTC (rev 4062)
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
@@ -34,15 +34,11 @@
# IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
# CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
@@ -73,32 +69,51 @@
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(s3_drv_ladir)"
s3_drv_laLTLIBRARIES_INSTALL = $(INSTALL)
-LTLIBRARIES = $(s3_drv_la_LTLIBRARIES)
-s3_drv_la_LIBADD =
-am_s3_drv_la_OBJECTS = s3_accel.lo s3_bios.lo s3_cursor.lo s3_dga.lo \
- s3_driver.lo s3_IBMRGB.lo s3_Ti.lo s3_Trio64DAC.lo s3_video.lo
+LTLIBRARIES = $(noinst_LTLIBRARIES) $(s3_drv_la_LTLIBRARIES)
+libs3_accel_newmmio_la_LIBADD =
+am_libs3_accel_newmmio_la_OBJECTS = \
+ libs3_accel_newmmio_la-s3_accel.lo
+libs3_accel_newmmio_la_OBJECTS = $(am_libs3_accel_newmmio_la_OBJECTS)
+libs3_accel_newmmio_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+ $(libs3_accel_newmmio_la_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+libs3_accel_pio_la_LIBADD =
+am_libs3_accel_pio_la_OBJECTS = libs3_accel_pio_la-s3_accel.lo
+libs3_accel_pio_la_OBJECTS = $(am_libs3_accel_pio_la_OBJECTS)
+libs3_accel_pio_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) \
+ $(libs3_accel_pio_la_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+s3_drv_la_DEPENDENCIES = libs3_accel_newmmio.la libs3_accel_pio.la
+am_s3_drv_la_OBJECTS = s3_bios.lo s3_cursor.lo s3_dga.lo s3_driver.lo \
+ s3_IBMRGB.lo s3_Ti.lo s3_Trio64DAC.lo s3_video.lo
s3_drv_la_OBJECTS = $(am_s3_drv_la_OBJECTS)
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+s3_drv_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(s3_drv_la_LDFLAGS) $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I. -I$(top_builddir)@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
- $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(s3_drv_la_SOURCES)
-DIST_SOURCES = $(s3_drv_la_SOURCES)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(libs3_accel_newmmio_la_SOURCES) \
+ $(libs3_accel_pio_la_SOURCES) $(s3_drv_la_SOURCES)
+DIST_SOURCES = $(libs3_accel_newmmio_la_SOURCES) \
+ $(libs3_accel_pio_la_SOURCES) $(s3_drv_la_SOURCES)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
APP_MAN_DIR = @APP_MAN_DIR@
APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
@@ -133,6 +148,7 @@
FILE_MAN_DIR = @FILE_MAN_DIR@
FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
GREP = @GREP@
+INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -146,11 +162,10 @@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MISC_MAN_DIR = @MISC_MAN_DIR@
MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
+MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
@@ -167,13 +182,13 @@
VERSION = @VERSION@
XORG_CFLAGS = @XORG_CFLAGS@
XORG_LIBS = @XORG_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
@@ -185,6 +200,7 @@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
+builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
@@ -213,8 +229,11 @@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
# this is obnoxious:
# -module lets us name the module exactly how we want
@@ -227,7 +246,6 @@
s3_drv_ladir = @moduledir@/drivers
s3_drv_la_SOURCES = \
newmmio.h \
- s3_accel.c \
s3_bios.c \
s3_cursor.c \
s3_dga.c \
@@ -239,6 +257,12 @@
s3_Trio64DAC.c \
s3_video.c
+noinst_LTLIBRARIES = libs3_accel_newmmio.la libs3_accel_pio.la
+s3_drv_la_LIBADD = libs3_accel_newmmio.la libs3_accel_pio.la
+libs3_accel_newmmio_la_SOURCES = s3_accel.c
+libs3_accel_newmmio_la_CFLAGS = $(AM_CFLAGS) -DS3_NEWMMIO=1
+libs3_accel_pio_la_SOURCES = s3_accel.c
+libs3_accel_pio_la_CFLAGS = $(AM_CFLAGS)
all: all-am
.SUFFIXES:
@@ -272,9 +296,18 @@
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+clean-noinstLTLIBRARIES:
+ -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+ @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
+ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+ test "$$dir" != "$$p" || dir=.; \
+ echo "rm -f \"$${dir}/so_locations\""; \
+ rm -f "$${dir}/so_locations"; \
+ done
install-s3_drv_laLTLIBRARIES: $(s3_drv_la_LTLIBRARIES)
@$(NORMAL_INSTALL)
- test -z "$(s3_drv_ladir)" || $(mkdir_p) "$(DESTDIR)$(s3_drv_ladir)"
+ test -z "$(s3_drv_ladir)" || $(MKDIR_P) "$(DESTDIR)$(s3_drv_ladir)"
@list='$(s3_drv_la_LTLIBRARIES)'; for p in $$list; do \
if test -f $$p; then \
f=$(am__strip_dir) \
@@ -285,7 +318,7 @@
uninstall-s3_drv_laLTLIBRARIES:
@$(NORMAL_UNINSTALL)
- @set -x; list='$(s3_drv_la_LTLIBRARIES)'; for p in $$list; do \
+ @list='$(s3_drv_la_LTLIBRARIES)'; for p in $$list; do \
p=$(am__strip_dir) \
echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(s3_drv_ladir)/$$p'"; \
$(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(s3_drv_ladir)/$$p"; \
@@ -299,8 +332,12 @@
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
+libs3_accel_newmmio.la: $(libs3_accel_newmmio_la_OBJECTS) $(libs3_accel_newmmio_la_DEPENDENCIES)
+ $(libs3_accel_newmmio_la_LINK) $(libs3_accel_newmmio_la_OBJECTS) $(libs3_accel_newmmio_la_LIBADD) $(LIBS)
+libs3_accel_pio.la: $(libs3_accel_pio_la_OBJECTS) $(libs3_accel_pio_la_DEPENDENCIES)
+ $(libs3_accel_pio_la_LINK) $(libs3_accel_pio_la_OBJECTS) $(libs3_accel_pio_la_LIBADD) $(LIBS)
s3_drv.la: $(s3_drv_la_OBJECTS) $(s3_drv_la_DEPENDENCIES)
- $(LINK) -rpath $(s3_drv_ladir) $(s3_drv_la_LDFLAGS) $(s3_drv_la_OBJECTS) $(s3_drv_la_LIBADD) $(LIBS)
+ $(s3_drv_la_LINK) -rpath $(s3_drv_ladir) $(s3_drv_la_OBJECTS) $(s3_drv_la_LIBADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
@@ -308,10 +345,11 @@
distclean-compile:
-rm -f *.tab.c
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libs3_accel_newmmio_la-s3_accel.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libs3_accel_pio_la-s3_accel.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/s3_IBMRGB.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/s3_Ti.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/s3_Trio64DAC.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/s3_accel.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/s3_bios.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/s3_cursor.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/s3_dga.Plo@am__quote@
@@ -319,36 +357,46 @@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/s3_video.Plo@am__quote@
.c.o:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
.c.obj:
-@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
-@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
-@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
+@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+libs3_accel_newmmio_la-s3_accel.lo: s3_accel.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libs3_accel_newmmio_la_CFLAGS) $(CFLAGS) -MT libs3_accel_newmmio_la-s3_accel.lo -MD -MP -MF $(DEPDIR)/libs3_accel_newmmio_la-s3_accel.Tpo -c -o libs3_accel_newmmio_la-s3_accel.lo `test -f 's3_accel.c' || echo '$(srcdir)/'`s3_accel.c
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libs3_accel_newmmio_la-s3_accel.Tpo $(DEPDIR)/libs3_accel_newmmio_la-s3_accel.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='s3_accel.c' object='libs3_accel_newmmio_la-s3_accel.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libs3_accel_newmmio_la_CFLAGS) $(CFLAGS) -c -o libs3_accel_newmmio_la-s3_accel.lo `test -f 's3_accel.c' || echo '$(srcdir)/'`s3_accel.c
+
+libs3_accel_pio_la-s3_accel.lo: s3_accel.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libs3_accel_pio_la_CFLAGS) $(CFLAGS) -MT libs3_accel_pio_la-s3_accel.lo -MD -MP -MF $(DEPDIR)/libs3_accel_pio_la-s3_accel.Tpo -c -o libs3_accel_pio_la-s3_accel.lo `test -f 's3_accel.c' || echo '$(srcdir)/'`s3_accel.c
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libs3_accel_pio_la-s3_accel.Tpo $(DEPDIR)/libs3_accel_pio_la-s3_accel.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='s3_accel.c' object='libs3_accel_pio_la-s3_accel.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libs3_accel_pio_la_CFLAGS) $(CFLAGS) -c -o libs3_accel_pio_la-s3_accel.lo `test -f 's3_accel.c' || echo '$(srcdir)/'`s3_accel.c
+
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
-distclean-libtool:
- -rm -f libtool
-uninstall-info-am:
-
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
@@ -398,22 +446,21 @@
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
- list='$(DISTFILES)'; for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
- esac; \
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- dir="/$$dir"; \
- $(mkdir_p) "$(distdir)$$dir"; \
- else \
- dir=''; \
- fi; \
if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
@@ -429,7 +476,7 @@
all-am: Makefile $(LTLIBRARIES)
installdirs:
for dir in "$(DESTDIR)$(s3_drv_ladir)"; do \
- test -z "$$dir" || $(mkdir_p) "$$dir"; \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
@@ -457,14 +504,14 @@
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
-clean-am: clean-generic clean-libtool clean-s3_drv_laLTLIBRARIES \
- mostlyclean-am
+clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
+ clean-s3_drv_laLTLIBRARIES mostlyclean-am
distclean: distclean-am
-rm -rf ./$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
- distclean-libtool distclean-tags
+ distclean-tags
dvi: dvi-am
@@ -478,12 +525,20 @@
install-data-am: install-s3_drv_laLTLIBRARIES
+install-dvi: install-dvi-am
+
install-exec-am:
+install-html: install-html-am
+
install-info: install-info-am
install-man:
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
installcheck-am:
maintainer-clean: maintainer-clean-am
@@ -504,20 +559,24 @@
ps-am:
-uninstall-am: uninstall-info-am uninstall-s3_drv_laLTLIBRARIES
+uninstall-am: uninstall-s3_drv_laLTLIBRARIES
+.MAKE: install-am install-strip
+
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-s3_drv_laLTLIBRARIES ctags distclean \
- distclean-compile distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am html html-am info info-am \
- install install-am install-data install-data-am install-exec \
- install-exec-am install-info install-info-am install-man \
+ clean-libtool clean-noinstLTLIBRARIES \
+ clean-s3_drv_laLTLIBRARIES ctags distclean distclean-compile \
+ distclean-generic distclean-libtool distclean-tags distdir dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am \
install-s3_drv_laLTLIBRARIES install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags uninstall uninstall-am uninstall-info-am \
- uninstall-s3_drv_laLTLIBRARIES
+ tags uninstall uninstall-am uninstall-s3_drv_laLTLIBRARIES
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
Reply to: