Bug#389986: xserver-xorg: package configuration on fresh install fails
Package: xserver-xorg
Version: 1:7.1.0-1
Severity: grave
Justification: renders package unusable
*** Please type your report below this line ***
On a fresh install with no previous X version. I was not able to get
xserver-xorg configured upon its first installation without first
lowering the debconf priority to low.
Until I did, the .postinst script went into a loop complaining about
null not being an acceptable value (for what, it didn't say).
I added "set -x" to the .postinst sctript, below is stderr from that
run.
thanks,
stew
+ . /usr/share/debconf/confmodule
++ '[' '!' '' ']'
++ PERL_DL_NONLAZY=1
++ export PERL_DL_NONLAZY
++ '[' '' ']'
++ exec /usr/share/debconf/frontend /var/lib/dpkg/info/xserver-xorg.postinst
configure ''
+ . /usr/share/debconf/confmodule
++ '[' '!' 1 ']'
++ '[' -z '' ']'
++ exec
++ '[' '' ']'
++ exec
++ DEBCONF_REDIR=1
++ export DEBCONF_REDIR
+ THIS_PACKAGE=xserver-xorg
+ THIS_SCRIPT=postinst
+ SOURCE_VERSION=1:7.1.0-1
+ OFFICIAL_BUILD=yes
+ SHELL_LIB_INTERNAL_ERROR=86
+ SHELL_LIB_THROWN_ERROR=74
+ SHELL_LIB_USAGE_ERROR=99
+ '[' -z '' ']'
+ '[' -n '' ']'
+ '[' -z '' ']'
+ '[' -n '' ']'
+ '[' -z xserver-xorg ']'
+ '[' -z postinst ']'
++ dpkg --print-installation-architecture
+ ARCHITECTURE=i386
+ LAPTOP=
++ which laptop-detect
+ '[' -n /usr/sbin/laptop-detect ']'
+ laptop-detect
+ LAPTOP=true
+ '[' configure = reconfigure ']'
+ '[' -n '' ']'
+ RECONFIGURE=
+ '[' configure = install ']'
+ '[' configure = configure ']'
+ '[' -z '' ']'
+ FIRSTINST=yes
+ '[' -z '' ']'
+ '[' -z yes ']'
+ trap 'message; message "Received signal. Aborting xserver-xorg package
postinst script."; message; exit 1' HUP INT QUIT TERM
++ stty size
++ awk '{print $2}'
+ DEFCOLUMNS=
+ expr '' : '[[:digit:]]\+$'
+ DEFCOLUMNS=80
+ which readlink
+ '[' -e /etc/default/xorg ']'
+ '[' x = xcustom ']'
+ CONFIG_DIR=/etc/X11
+ SERVER_SYMLINK=/etc/X11/X
+ XF86CONFIG=/etc/X11/XF86Config-4
+ XORGCONFIG=/etc/X11/xorg.conf
+ CONFIG_AUX_DIR=/var/lib/x11
+ SERVER_SYMLINK_CHECKSUM=/var/lib/x11/X.md5sum
+ SERVER_SYMLINK_ROSTER=/var/lib/x11/X.roster
+ XF86CONFIG_CHECKSUM=/var/lib/x11/XF86Config-4.md5sum
+ XORGCONFIG_CHECKSUM=/var/lib/x11/xorg.conf.md5sum
+ XF86CONFIG_ROSTER=/var/lib/x11/XF86Config-4.roster
+ XORGCONFIG_ROSTER=/var/lib/x11/xorg.conf.roster
+ THIS_SERVER=/usr/bin/Xorg
+ '[' -e /var/lib/x11/.migrateconfig ']'
+ '[' -n '' ']'
+ for ROSTER in '"$SERVER_SYMLINK_ROSTER"' '"$XORGCONFIG_ROSTER"'
+ fgrep -qsx xserver-xorg /var/lib/x11/X.roster
+ for ROSTER in '"$SERVER_SYMLINK_ROSTER"' '"$XORGCONFIG_ROSTER"'
+ fgrep -qsx xserver-xorg /var/lib/x11/xorg.conf.roster
+ '[' -L /etc/X11/X ']'
++ readlink /etc/X11/X
+ '[' /usr/bin/Xorg = /usr/X11R6/bin/Xorg ']'
++ readlink /etc/X11/X
+ '[' /usr/bin/Xorg = /usr/bin/X11/Xorg ']'
++ readlink /etc/X11/X
+ '[' /usr/bin/Xorg = /bin/true ']'
+ '[' '!' -e /var/lib/x11/X.md5sum ']'
++ readlink /etc/X11/X
++ md5sum
++ cat /var/lib/x11/X.md5sum
+ '[' '5d831b0f7d5640fb6b825e56dda8e520 -' = '218470713acdfa492a70a4eacf71c276
-' ']'
++ echo /usr/X11R6/bin/Xorg
++ md5sum
++ cat /var/lib/x11/X.md5sum
+ '[' '2516693db02a93706e9018c30478ae4a -' = '218470713acdfa492a70a4eacf71c276
-' ']'
++ echo /usr/bin/X11/Xorg
++ md5sum
++ cat /var/lib/x11/X.md5sum
+ '[' '83ab85c01fb6849bc0c0827fab4ca91f -' = '218470713acdfa492a70a4eacf71c276
-' ']'
+ '[' -e /etc/X11/X ']'
+ warn 'not updating /etc/X11/X; file has been customized'
+ message 'xserver-xorg postinst warning: not updating /etc/X11/X; file has been
customized'
+ reject_nondigits ''
+ '[' -n '' ']'
+ echo 'xserver-xorg postinst warning: not updating /etc/X11/X; file has been
customized'
+ fmt -t -w 80
xserver-xorg postinst warning: not updating /etc/X11/X; file has been
customized
+ '[' -z '' ']'
++ md5sum /etc/X11/xorg.conf
++ cat /var/lib/x11/xorg.conf.md5sum
+ '[' 'd41d8cd98f00b204e9800998ecf8427e /etc/X11/xorg.conf' =
'd41d8cd98f00b204e9800998ecf8427e /etc/X11/xorg.conf' ']'
+ NEW_XORGCONFIG=/etc/X11/xorg.conf.dpkg-new
+ '[' -n '' ']'
+ xresprobeint
+ PRIORITY=medium
+ db_input medium xserver-xorg/autodetect_monitor
+ _db_cmd 'INPUT medium' xserver-xorg/autodetect_monitor
+ printf '%s\n' 'INPUT medium xserver-xorg/autodetect_monitor'
+ IFS='
'
+ read -r _db_internal_line
+ RET='30 question skipped'
+ case ${_db_internal_line%%[ ]*} in
+ return 30
+ debug_echo 'db_get xserver-xorg/autodetect_monitor'
+ '[' -n '' ']'
+ '[' '' = user ']'
+ '[' '' = '.*' ']'
+ db_go
+ _db_cmd 'GO '
+ printf '%s\n' 'GO '
+ IFS='
'
+ read -r _db_internal_line
+ RET=ok
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ db_get xserver-xorg/autodetect_monitor
+ _db_cmd 'GET xserver-xorg/autodetect_monitor'
+ printf '%s\n' 'GET xserver-xorg/autodetect_monitor'
+ IFS='
'
+ read -r _db_internal_line
+ RET=true
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ '[' true = true ']'
+ AUTODETECT_VIDEO=yes
+ '[' -n yes ']'
+ '[' -z '' ']'
+ MONITOR_IDENTIFIER=
+ RESOLUTIONS=
+ HORIZ_SYNC=
+ VERT_REFRESH=
+ for i in identifier horiz-sync vert-refresh use_sync_ranges selection-method
screen-size
+ db_reset xserver-xorg/config/monitor/identifier
+ _db_cmd 'RESET xserver-xorg/config/monitor/identifier'
+ printf '%s\n' 'RESET xserver-xorg/config/monitor/identifier'
+ IFS='
'
+ read -r _db_internal_line
+ RET=0
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ for i in identifier horiz-sync vert-refresh use_sync_ranges selection-method
screen-size
+ db_reset xserver-xorg/config/monitor/horiz-sync
+ _db_cmd 'RESET xserver-xorg/config/monitor/horiz-sync'
+ printf '%s\n' 'RESET xserver-xorg/config/monitor/horiz-sync'
+ IFS='
'
+ read -r _db_internal_line
+ RET=0
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ for i in identifier horiz-sync vert-refresh use_sync_ranges selection-method
screen-size
+ db_reset xserver-xorg/config/monitor/vert-refresh
+ _db_cmd 'RESET xserver-xorg/config/monitor/vert-refresh'
+ printf '%s\n' 'RESET xserver-xorg/config/monitor/vert-refresh'
+ IFS='
'
+ read -r _db_internal_line
+ RET=0
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ for i in identifier horiz-sync vert-refresh use_sync_ranges selection-method
screen-size
+ db_reset xserver-xorg/config/monitor/use_sync_ranges
+ _db_cmd 'RESET xserver-xorg/config/monitor/use_sync_ranges'
+ printf '%s\n' 'RESET xserver-xorg/config/monitor/use_sync_ranges'
+ IFS='
'
+ read -r _db_internal_line
+ RET=0
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ for i in identifier horiz-sync vert-refresh use_sync_ranges selection-method
screen-size
+ db_reset xserver-xorg/config/monitor/selection-method
+ _db_cmd 'RESET xserver-xorg/config/monitor/selection-method'
+ printf '%s\n' 'RESET xserver-xorg/config/monitor/selection-method'
+ IFS='
'
+ read -r _db_internal_line
+ RET=0
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ for i in identifier horiz-sync vert-refresh use_sync_ranges selection-method
screen-size
+ db_reset xserver-xorg/config/monitor/screen-size
+ _db_cmd 'RESET xserver-xorg/config/monitor/screen-size'
+ printf '%s\n' 'RESET xserver-xorg/config/monitor/screen-size'
+ IFS='
'
+ read -r _db_internal_line
+ RET=0
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ for i in modes
+ db_reset xserver-xorg/config/display/modes
+ _db_cmd 'RESET xserver-xorg/config/display/modes'
+ printf '%s\n' 'RESET xserver-xorg/config/display/modes'
+ IFS='
'
+ read -r _db_internal_line
+ RET=0
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ for i in default_depth
+ db_fget xserver-xorg/config/display/default_depth seen
+ _db_cmd 'FGET xserver-xorg/config/display/default_depth' seen
+ printf '%s\n' 'FGET xserver-xorg/config/display/default_depth seen'
+ IFS='
'
+ read -r _db_internal_line
+ RET=false
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ '[' false = false ']'
+ db_reset xserver-xorg/config/display/default_depth
+ _db_cmd 'RESET xserver-xorg/config/display/default_depth'
+ printf '%s\n' 'RESET xserver-xorg/config/display/default_depth'
+ IFS='
'
+ read -r _db_internal_line
+ RET=0
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ db_get xserver-xorg/config/device/driver
+ _db_cmd 'GET xserver-xorg/config/device/driver'
+ printf '%s\n' 'GET xserver-xorg/config/device/driver'
+ IFS='
'
+ read -r _db_internal_line
+ RET=ati
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ DEVICE_DRIVER=ati
+ db_get xserver-xorg/config/device/identifier
+ _db_cmd 'GET xserver-xorg/config/device/identifier'
+ printf '%s\n' 'GET xserver-xorg/config/device/identifier'
+ IFS='
'
+ read -r _db_internal_line
+ RET='ATI Technologies Inc M24 1P [Radeon Mobility X600]'
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ DEVICE_IDENTIFIER='ATI Technologies Inc M24 1P [Radeon Mobility X600]'
+ which xresprobe
+ set +e
++ xresprobe ati
+ PROBE_DUMP='id:
res: 1680x1050
freq:
disptype: lcd/lvds'
+ set -e
++ echo 'id:
res: 1680x1050
freq:
disptype: lcd/lvds'
++ grep '^id:'
++ sed -e 's/^id: //g' -e 's/"//g'
+ MONITOR_IDENTIFIER=
++ echo 'id:
res: 1680x1050
freq:
disptype: lcd/lvds'
++ grep '^res:'
++ sed -e 's/^res: //g'
+ RESOLUTIONS=1680x1050
++ echo 'id:
res: 1680x1050
freq:
disptype: lcd/lvds'
++ grep '^freq:'
++ sed -e 's/^freq: //g'
++ cut -d ' ' -f 1
+ HORIZ_SYNC=
++ echo 'id:
res: 1680x1050
freq:
disptype: lcd/lvds'
++ grep '^freq:'
++ sed -e 's/^freq: //g'
++ cut -d ' ' -f 2
+ VERT_REFRESH=
++ echo 'id:
res: 1680x1050
freq:
disptype: lcd/lvds'
++ grep '^disptype:'
++ sed -e 's/^disptype: //g'
+ DISPLAY_TYPE=lcd/lvds
++ echo 'id:
res: 1680x1050
freq:
disptype: lcd/lvds'
++ grep '^depth:'
++ sed -e 's/^depth: //g'
+ DISPLAY_DEPTH=
+ '[' -n '' ']'
+ '[' ati = nv ']'
+ '[' ati = savage ']'
+ '[' ati = trident ']'
+ '[' ati = via ']'
+ '[' ati = siliconmotion ']'
+ '[' ati = chips ']'
+ '[' ati = tdfx ']'
+ '[' ati = neomagic ']'
+ '[' ati = s3 ']'
+ '[' ati = ati ']'
+ '[' lcd/lvds = lcd/lvds ']'
+ '[' 'ATI Technologies Inc M24 1P [Radeon Mobility X600]' = 'ATI Technologies,
Inc. Rage Mobility M3 (AGP)' ']'
+ '[' 'ATI Technologies Inc M24 1P [Radeon Mobility X600]' = 'ATI Technologies,
Inc. Rage Mobility M4 (AGP)' ']'
+ echo 'ATI Technologies Inc M24 1P [Radeon Mobility X600]'
+ grep -q 'Rage 128'
+ '[' ati = i810 ']'
+ '[' -z '' ']'
+ db_get xserver-xorg/config/monitor/default-identifier
+ _db_cmd 'GET xserver-xorg/config/monitor/default-identifier'
+ printf '%s\n' 'GET xserver-xorg/config/monitor/default-identifier'
+ IFS='
'
+ read -r _db_internal_line
+ RET=
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ MONITOR_IDENTIFIER=
+ db_set xserver-xorg/config/monitor/identifier ''
+ _db_cmd 'SET xserver-xorg/config/monitor/identifier' ''
+ printf '%s\n' 'SET xserver-xorg/config/monitor/identifier '
+ IFS='
'
+ read -r _db_internal_line
+ RET='value set'
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ MAY_BE_NULL=
+ validate_string_db_input low xserver-xorg/config/monitor/identifier
+ '[' 2 -ne 2 ']'
+ PRIORITY=low
+ TEMPLATE=xserver-xorg/config/monitor/identifier
+ db_get xserver-xorg/config/monitor/identifier
+ _db_cmd 'GET xserver-xorg/config/monitor/identifier'
+ printf '%s\n' 'GET xserver-xorg/config/monitor/identifier'
+ IFS='
'
+ read -r _db_internal_line
+ RET=
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ SAFE=
+ set +e
+ :
+ db_input low xserver-xorg/config/monitor/identifier
+ _db_cmd 'INPUT low' xserver-xorg/config/monitor/identifier
+ printf '%s\n' 'INPUT low xserver-xorg/config/monitor/identifier'
+ IFS='
'
+ read -r _db_internal_line
+ RET='30 question skipped'
+ case ${_db_internal_line%%[ ]*} in
+ return 30
+ debug_echo 'v_s_d_i/db_input low xserver-xorg/config/monitor/identifier'
+ '[' -n '' ']'
+ '[' '' = user ']'
+ '[' '' = '.*' ']'
+ '[' 0 -eq 30 ']'
+ db_go
+ _db_cmd 'GO '
+ printf '%s\n' 'GO '
+ IFS='
'
+ read -r _db_internal_line
+ RET=ok
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ db_get xserver-xorg/config/monitor/identifier
+ _db_cmd 'GET xserver-xorg/config/monitor/identifier'
+ printf '%s\n' 'GET xserver-xorg/config/monitor/identifier'
+ IFS='
'
+ read -r _db_internal_line
+ RET=
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ '[' -n '' ']'
+ '[' -n '' ']'
+ ERROR=xserver-xorg/config/null_string_error
+ db_set xserver-xorg/config/monitor/identifier ''
+ _db_cmd 'SET xserver-xorg/config/monitor/identifier' ''
+ printf '%s\n' 'SET xserver-xorg/config/monitor/identifier '
+ IFS='
'
+ read -r _db_internal_line
+ RET='value set'
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ db_fset xserver-xorg/config/monitor/identifier seen false
+ _db_cmd 'FSET xserver-xorg/config/monitor/identifier' seen false
+ printf '%s\n' 'FSET xserver-xorg/config/monitor/identifier seen false'
+ IFS='
'
+ read -r _db_internal_line
+ RET=false
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ db_fset xserver-xorg/config/null_string_error seen false
+ _db_cmd 'FSET xserver-xorg/config/null_string_error' seen false
+ printf '%s\n' 'FSET xserver-xorg/config/null_string_error seen false'
+ IFS='
'
+ read -r _db_internal_line
+ RET=false
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ db_input critical xserver-xorg/config/null_string_error
+ _db_cmd 'INPUT critical' xserver-xorg/config/null_string_error
+ printf '%s\n' 'INPUT critical xserver-xorg/config/null_string_error'
+ IFS='
'
+ read -r _db_internal_line
+ RET='question will be asked'
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ db_go
+ _db_cmd 'GO '
+ printf '%s\n' 'GO '
+ IFS='
'
+ read -r _db_internal_line
+ RET=ok
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ :
+ db_input low xserver-xorg/config/monitor/identifier
+ _db_cmd 'INPUT low' xserver-xorg/config/monitor/identifier
+ printf '%s\n' 'INPUT low xserver-xorg/config/monitor/identifier'
+ IFS='
'
+ read -r _db_internal_line
+ RET='30 question skipped'
+ case ${_db_internal_line%%[ ]*} in
+ return 30
+ debug_echo 'v_s_d_i/db_input low xserver-xorg/config/monitor/identifier'
+ '[' -n '' ']'
+ '[' '' = user ']'
+ '[' '' = '.*' ']'
+ '[' 0 -eq 30 ']'
+ db_go
+ _db_cmd 'GO '
+ printf '%s\n' 'GO '
+ IFS='
'
+ read -r _db_internal_line
+ RET=ok
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ db_get xserver-xorg/config/monitor/identifier
+ _db_cmd 'GET xserver-xorg/config/monitor/identifier'
+ printf '%s\n' 'GET xserver-xorg/config/monitor/identifier'
+ IFS='
'
+ read -r _db_internal_line
+ RET=
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ '[' -n '' ']'
+ '[' -n '' ']'
+ ERROR=xserver-xorg/config/null_string_error
+ db_set xserver-xorg/config/monitor/identifier ''
+ _db_cmd 'SET xserver-xorg/config/monitor/identifier' ''
+ printf '%s\n' 'SET xserver-xorg/config/monitor/identifier '
+ IFS='
'
+ read -r _db_internal_line
+ RET='value set'
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ db_fset xserver-xorg/config/monitor/identifier seen false
+ _db_cmd 'FSET xserver-xorg/config/monitor/identifier' seen false
+ printf '%s\n' 'FSET xserver-xorg/config/monitor/identifier seen false'
+ IFS='
'
+ read -r _db_internal_line
+ RET=false
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ db_fset xserver-xorg/config/null_string_error seen false
+ _db_cmd 'FSET xserver-xorg/config/null_string_error' seen false
+ printf '%s\n' 'FSET xserver-xorg/config/null_string_error seen false'
+ IFS='
'
+ read -r _db_internal_line
+ RET=false
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ db_input critical xserver-xorg/config/null_string_error
+ _db_cmd 'INPUT critical' xserver-xorg/config/null_string_error
+ printf '%s\n' 'INPUT critical xserver-xorg/config/null_string_error'
+ IFS='
'
+ read -r _db_internal_line
+ RET='question will be asked'
+ case ${_db_internal_line%%[ ]*} in
+ return 0
+ db_go
+ _db_cmd 'GO '
+ printf '%s\n' 'GO '
+ IFS='
'
+ read -r _db_internal_line
++ message
++ reject_nondigits ''
++ '[' -n '' ']'
++ echo ''
++ fmt -t -w 80
++ message 'Received signal. Aborting xserver-xorg package postinst script.'
++ reject_nondigits ''
++ '[' -n '' ']'
++ echo 'Received signal. Aborting xserver-xorg package postinst script.'
++ fmt -t -w 80
Received signal. Aborting xserver-xorg package postinst script.
++ message
++ reject_nondigits ''
++ '[' -n '' ']'
++ echo ''
++ fmt -t -w 80
++ exit 1
dpkg: error processing xserver-xorg (--configure):
subprocess post-installation script killed by signal (Terminated)
dpkg: dependency problems prevent configuration of xorg:
xorg depends on xserver-xorg; however:
Package xserver-xorg is not configured yet.
dpkg: error processing xorg (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
xserver-xorg
xorg
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Versions of packages xserver-xorg depends on:
ii debconf 1.5.5 Debian configuration management sy
ii x11-common 1:7.1.0-1 X Window System (X.Org) infrastruc
ii xbase-clients 1:7.1.ds-3 miscellaneous X clients
ii xkb-data 0.8-14 X Keyboard Extension (XKB) configu
ii xserver-xorg-core 2:1.1.1-8 X.Org X server -- core server
ii xserver-xorg-input-all 1:7.1.0-1 the X.Org X server -- input driver
ii xserver-xorg-input-evde 1:1.1.2-3 X.Org X server -- evdev input driv
ii xserver-xorg-input-kbd 1:1.1.0-2 X.Org X server -- keyboard input d
ii xserver-xorg-input-mous 1:1.1.1-3 X.Org X server -- mouse input driv
ii xserver-xorg-video-all 1:7.1.0-1 the X.Org X server -- output drive
ii xserver-xorg-video-apm 1:1.1.1-3 X.Org X server -- APM display driv
ii xserver-xorg-video-ark 1:0.6.0-3 X.Org X server -- ark display driv
ii xserver-xorg-video-ati 1:6.6.2-2 X.Org X server -- ATI display driv
ii xserver-xorg-video-chip 1:1.1.1-4 X.Org X server -- Chips display dr
ii xserver-xorg-video-cirr 1:1.1.0-3 X.Org X server -- Cirrus display d
ii xserver-xorg-video-cyri 1:1.1.0-4 X.Org X server -- Cyrix display dr
ii xserver-xorg-video-dumm 1:0.2.0-3 X.Org X server -- dummy display dr
ii xserver-xorg-video-fbde 1:0.3.0-3 X.Org X server -- fbdev display dr
ii xserver-xorg-video-glin 1:1.1.1-3 X.Org X server -- Glint display dr
ii xserver-xorg-video-i128 1:1.2.0-3 X.Org X server -- i128 display dri
ii xserver-xorg-video-i740 1:1.1.0-3 X.Org X server -- i740 display dri
ii xserver-xorg-video-i810 2:1.6.5-3 X.Org X server -- Intel i8xx, i9xx
ii xserver-xorg-video-imst 1:1.1.0-3 X.Org X server -- IMSTT display dr
ii xserver-xorg-video-mga 1:1.4.1.dfsg.1-4 X.Org X server -- MGA display driv
ii xserver-xorg-video-neom 1:1.1.1-4 X.Org X server -- Neomagic display
ii xserver-xorg-video-newp 1:0.2.0-3 X.Org X server -- Newport display
ii xserver-xorg-video-nsc 1:2.8.1-3 X.Org X server -- NSC display driv
ii xserver-xorg-video-nv [ 1:1.2.0-3 X.Org X server -- NV display drive
ii xserver-xorg-video-rend 1:4.1.0.dfsg.1-4 X.Org X server -- Rendition displa
ii xserver-xorg-video-s3vi 1:1.9.1-3 X.Org X server -- S3 ViRGE display
ii xserver-xorg-video-sava 1:2.1.1-4 X.Org X server -- Savage display d
ii xserver-xorg-video-sili 1:1.4.1-4 X.Org X server -- SiliconMotion di
ii xserver-xorg-video-sis 1:0.9.1-3 X.Org X server -- SiS display driv
ii xserver-xorg-video-sisu 1:0.8.1-3 X.Org X server -- SiS USB display
ii xserver-xorg-video-tdfx 1:1.2.1-4 X.Org X server -- tdfx display dri
ii xserver-xorg-video-tga 1:1.1.0-3 X.Org X server -- TGA display driv
ii xserver-xorg-video-trid 1:1.2.1-3 X.Org X server -- Trident display
ii xserver-xorg-video-tsen 1:1.1.0-3 X.Org X server -- Tseng display dr
ii xserver-xorg-video-v4l 0.1.1-3 X.Org X server -- Video 4 Linux di
ii xserver-xorg-video-vesa 1:1.2.1-3 X.Org X server -- VESA display dri
ii xserver-xorg-video-vga 1:4.1.0-3 X.Org X server -- VGA display driv
ii xserver-xorg-video-via 1:0.2.1-4 X.Org X server -- VIA display driv
ii xserver-xorg-video-vmwa 1:10.13.0-3 X.Org X server -- VMware display d
ii xserver-xorg-video-vood 1:1.1.0-3 X.Org X server -- Voodoo display d
Versions of packages xserver-xorg recommends:
ii discover 2.1.1-1 hardware identification system
ii laptop-detect 0.12.1 attempt to detect a laptop
ii mdetect 0.5.2.1 mouse device autodetection tool
ii xresprobe 0.4.23debian1 X Resolution Probe
-- debconf information:
xserver-xorg/multiple_possible_x-drivers:
* xserver-xorg/config/monitor/use_sync_ranges: false
* xserver-xorg/config/inputdevice/mouse/port: /dev/input/mice
xserver-xorg/config/doublequote_in_string_error:
* xserver-xorg/config/monitor/screen-size: 17 inches (430 mm)
* shared/default-x-server: xserver-xorg
xserver-xorg/config/device/default-identifier:
* xserver-xorg/autodetect_monitor: true
* xserver-xorg/config/inputdevice/mouse/protocol: ImPS/2
shared/no_known_x-server:
* xserver-xorg/config/display/default_depth: 24
* xserver-xorg/config/display/modes: 1680x1050
xserver-xorg/config/device/bus_id_error:
xserver-xorg/config/monitor/vert-refresh: 50-160
* xserver-xorg/config/inputdevice/keyboard/options:
* xserver-xorg/autodetect_keyboard: false
* xserver-xorg/config/device/use_fbdev: false
* xserver-xorg/config/inputdevice/keyboard/variant:
xserver-xorg/config/nonnumeric_string_error:
* xserver-xorg/config/inputdevice/keyboard/layout: us
* xserver-xorg/config/modules: bitmap, ddc, dri, extmod, freetype, glx, int10,
type1, vbe
* xserver-xorg/config/monitor/identifier: thinkpad lcd
* xserver-xorg/config/inputdevice/mouse/emulate3buttons: false
xserver-xorg/autodetect_mouse: true
xserver-xorg/config/monitor/horiz-sync: 30-70
* xserver-xorg/config/device/video_ram:
xserver-xorg/config/monitor/range_input_error:
* xserver-xorg/config/inputdevice/keyboard/model: pc104
* xserver-xorg/config/device/driver: ati
* xserver-xorg/config/device/identifier: ATI Technologies Inc M24 1P [Radeon
Mobility X600]
* xserver-xorg/config/monitor/selection-method: Simple
* xserver-xorg/config/null_string_error:
shared/multiple_possible_x-servers:
* xserver-xorg/config/device/bus_id: PCI:1:0:0
* xserver-xorg/config/write_files_section: true
* xserver-xorg/autodetect_video_card: true
xserver-xorg/config/monitor/mode-list: 1680x1050 @ 60Hz
* xserver-xorg/config/inputdevice/keyboard/rules: xorg
xserver-xorg/config/monitor/default-identifier:
Reply to: