Bug#388453: fails to handle interrupt
On Wed, 2006-09-20 at 15:44 +0200, Vincent Zweije wrote:
> Package: xserver-xorg-video-via
> Version: 1:0.1.33.2-3
> Severity: minor
>
> When starting the X server, the kernel spits out the following message:
>
> Sep 20 10:02:59 arrow kernel: [drm] Initialized drm 1.0.1 20051102
> Sep 20 10:02:59 arrow kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
> Sep 20 10:02:59 arrow kernel: [drm] Initialized via 2.7.4 20051116 on minor 0
> Sep 20 10:02:59 arrow kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
> Sep 20 10:02:59 arrow kernel: agpgart: Xorg tried to set rate=x12. Setting to AGP3 x8 mode.
> Sep 20 10:02:59 arrow kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
> Sep 20 10:02:59 arrow kernel: agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
> Sep 20 10:03:00 arrow kernel: irq 201: nobody cared (try booting with the "irqpoll" option)
> Sep 20 10:03:00 arrow kernel: [<b012f12f>] __report_bad_irq+0x2b/0x69
> Sep 20 10:03:00 arrow kernel: [<b012f2e3>] note_interrupt+0x176/0x1a7
> Sep 20 10:03:00 arrow kernel: [<b012ed4b>] handle_IRQ_event+0x20/0x4c
> Sep 20 10:03:00 arrow kernel: [<b012eddc>] __do_IRQ+0x65/0x91
> Sep 20 10:03:00 arrow kernel: [<b0104a1b>] do_IRQ+0x1d/0x2a
> Sep 20 10:03:00 arrow kernel: [<b010335a>] common_interrupt+0x1a/0x20
> Sep 20 10:03:00 arrow kernel: [<b01019b1>] default_idle+0x2b/0x53
> Sep 20 10:03:00 arrow kernel: [<b0101a18>] cpu_idle+0x3f/0x57
> Sep 20 10:03:00 arrow kernel: [<b02e842d>] start_kernel+0x291/0x293
> Sep 20 10:03:00 arrow kernel: handlers:
> Sep 20 10:03:00 arrow kernel: [<ccbeb3b7>] (via_driver_irq_handler+0x0/0x148 [via])
> Sep 20 10:03:00 arrow kernel: Disabling IRQ #201
This is more likely a bug in the via kernel module than the X driver, so
you should probably reassign this bug to your kernel package.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
Reply to: