Bug#374986: tested patch, still crashes
Tried with radeon-force-some-clocks.diff, twice. One of the times I got much
further (I could actualy play the game, rather than only reach the menus), but
it also crashed after a very short time (1/2 minutes). The second time it just
crashed in the menus as usual.
The X server log is also different. No loop this time. I grabbed a copy of
Xorg.log before running the game (xmoto), so that I could diff it against the
complete log after rebooting the system. The following lines were printed after
xmoto started:
+(**) RADEON(0): RADEONDisplayPowerManagementSet(0,0x0)
+(**) RADEON(0): EngineRestore (32/32)
+(**) RADEON(0): RADEONSwitchMode() !n(**) RADEON(0): RADEONModeInit()
+800x600 56.30 800 832 896 1048 600 601 604 631 (24,32) +H +V
+800x600 56.30 800 832 896 1048 600 601 604 631 (24,32) +H +V
+(**) RADEON(0): Pitch = 8388736 bytes (virtualX = 1024, displayWidth = 1024)
+(**) RADEON(0): dc=5630, of=22520, fd=100, pd=4
+(**) RADEON(0): RADEONInit returns 0x6fe0b0
+(**) RADEON(0): RADEONRestoreMode()
+(**) RADEON(0): RADEONRestoreMode(0x6fe0b0)
+(**) RADEON(0): RADEONRestoreMemMapRegisters() :
+(**) RADEON(0): MC_FB_LOCATION : 0xd7ffd000
+(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
+(**) RADEON(0): Updating display base addresses...
+(**) RADEON(0): Memory map updated.
+(**) RADEON(0): Programming CRTC1, offset: 0x00000000
+(**) RADEON(0): Wrote: 0x0000000c 0x00020064 0x00000000 (0x0000a700)
+(**) RADEON(0): Wrote: rd=12, fd=100, pd=2
+(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 20157c7c
+(**) RADEON(0): EngineRestore (32/32)
This time I also saved stdout/stderr output from xmoto itself:
Unknown device ID 5B60, please report. Assuming plain R300.
libGL warning: 3D driver claims to not support visual 0x23
libGL warning: 3D driver claims to not support visual 0x24
libGL warning: 3D driver claims to not support visual 0x25
libGL warning: 3D driver claims to not support visual 0x26
libGL warning: 3D driver claims to not support visual 0x27
libGL warning: 3D driver claims to not support visual 0x28
libGL warning: 3D driver claims to not support visual 0x29
libGL warning: 3D driver claims to not support visual 0x2a
libGL warning: 3D driver claims to not support visual 0x2b
libGL warning: 3D driver claims to not support visual 0x2c
libGL warning: 3D driver claims to not support visual 0x2d
libGL warning: 3D driver claims to not support visual 0x2e
libGL warning: 3D driver claims to not support visual 0x2f
libGL warning: 3D driver claims to not support visual 0x30
libGL warning: 3D driver claims to not support visual 0x31
libGL warning: 3D driver claims to not support visual 0x32
*********************************WARN_ONCE*********************************
File r300_state.c function r300Enable line 456
TODO - double side stencil !
***************************************************************************
No ctx->FragmentProgram._Current!!
radeonWaitIrq: drmRadeonIrqWait: -16
Sidenote: My card is a Radeon X300 SE. Where should I report that ID 5b60 for
addition ? I couldn't find this string in the ati driver.
--
Robert Millan
My spam trap is <honeypot@aybabtu.com>. Note: this address is only intended for
spam harvesters. Writing to it will get you added to my black list.
Reply to: