[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#78601: marked as done (xserver-xfree86: [s3virge] XAA text rendering and VT corruption problems on S3 ViRGE/MX+MV rev 3)



Your message dated Sat, 10 Jun 2006 20:31:10 -0400
with message-id <20060611003110.GA14585@doctormoo.dyndns.org>
and subject line Submitter doesn't have hardware to reproduce, closing
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)

--- Begin Message ---
Package: xserver-xfree86
Version: 4.0.1-9
Severity: normal

This bug occurs since the start of the debian XFree4 packages, I reported it
to debian-x once, but had no time for a detailed bug report until now.

Starting X and working with X-Programms works just fine and is quite fast.

But opening a x-terminal-emulator like xterm or Eterm or konsole I get lot
of painting errors. The printed text is not readable most of it only arrives
the as pixel mash. It looks like someone took a spoon and had some work on
parts of the terminal-emulator.

Switching to a tty sometimes renders them to something like a graphics mode
with a refresh rate your monitor can't stand. There are vertical lines every
few millimeters and overall everytihng is crap so I have to reboot to get a
working screen again.

Pressing Ctrl-l in ncurses programms sometimes makes part of the text normal.
There is no possibility to use my favorit programms like mutt and tin, so I
switched back to Xfree 3.3.6, but test most XFree4 packages which arrive.

Working with "NoAccel" or in 8-bit colour mode works.

If I can provide further information I will happily do that.

Thanks a lot in advance.



lspci -v
--------

01:01.0 VGA compatible controller: S3 Inc. ViRGE/MX+MV (rev 03) (prog-if 00 [VGA])
        Subsystem: CLEVO/KAPOK Computer: Unknown device 5102
        Flags: bus master, medium devsel, latency 0
        Memory at 40000000 (32-bit, non-prefetchable)
        Expansion ROM at ffff0000 [disabled]
        Capabilities: [dc] Power Management version 1


/etc/X11/XF86Config-4
---------------------

Section "Files"
#	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/75dpi"
	FontPath	"/usr/lib/X11/fonts/100dpi"
EndSection

Section "ServerFlags"
EndSection

Section "Module"
	Load	"ddc"
	Load	"GLcore"
	Load	"dbe"
	Load	"dri"
	Load	"extmod"
	Load	"glx"
#	Load	"pex5"
	Load	"record"
	Load	"xie"
	Load	"bitmap"
	Load	"freetype"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"
	Load	"int10"
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
        SubSection	"extmod"
	        Option	"omit xfree86-dga"
        EndSubSection
EndSection



Section "InputDevice"

    Identifier	"Generic Keyboard"
    Driver	"keyboard"
    Option	"CoreKeyboard"
#    Option	"AutoRepeat"	"500 5"
#    Option	"Xleds"	"1 2 3"
#    Option	"XkbDisable"
    Option	"XkbModel"	"pc102"
    Option	"XkbLayout"	"de"
    Option	"XkbVariant"	"nodeadkeys"
EndSection



Section "InputDevice"
	Identifier	"Generic Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Protocol"		"PS/2"
	Option		"Device"		"/dev/gpmdata"
EndSection


Section "Device"
	Identifier	"Generic Graphics Device"
	Chipset		"virge mx+"
	Driver 		"s3virge"
	Option		"HWCursor"	"on"
	Option		"ShadowFB"	"off"
#	Option		"slow_dram"	"off"
	Option		"UseFB"		"on"
#	Option		"NoAccel"
EndSection



Section "Monitor"
	Identifier	"Generic Monitor"
	HorizSync	28-38
	VertRefresh	43-72
#	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"Generic Graphics Device"
	Monitor		"Generic Monitor"
	DefaultDepth	16
	SubSection "Display"
		Depth		1
		Modes		"800x600" 
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"800x600" 
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"800x600" 
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"800x600" 
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"800x600" 
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"800x600" 
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Generic Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

# end of XF86Config


	
/var/log/XFree86.0.log
----------------------

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.0.1g / X Window System
(protocol Version 11, revision 0, vendor release 6400)
Release Date: 29 November 2000
	If the server is older than 6-12 months, or if your card is
	newer than the above date, look for a newer version before
	reporting problems.  (See http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.18pre15 i686 [ELF] 
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Dec  2 18:34:30 2000
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Generic Graphics Device"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbModel" "pc102"
(**) XKB: model: "pc102"
(**) Option "XkbLayout" "de"
(**) XKB: layout: "de"
(**) Option "XkbVariant" "nodeadkeys"
(**) XKB: variant: "nodeadkeys"
(**) |-->Input Device "Generic Mouse"
(**) FontPath set to "/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/75dpi,/usr/lib/X11/fonts/100dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.1
	XFree86 Video Driver: 0.3
	XFree86 XInput driver : 0.1
	XFree86 Server Extension : 0.1
	XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.3
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000800c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 104c,ac1c card 0000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 104c,ac1c card 0000,0000 rev 01 class 06,07,00 hdr 82
(II) PCI: 00:10:0: chip 125d,1969 card 125d,8898 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:01:0: chip 5333,8c03 card 1558,5102 rev 03 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.3
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:0:0), (-1,-1,0), BCTRL: 0x00 (VGA_EN is cleared)
(II) Bus -1 I/O range:
	[0] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x88 (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0x40000000 - 0x470fffff (0x7100000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0x48000000 - 0x4f0fffff (0x7100000) MX[B]
(--) PCI:*(1:1:0) S3 ViRGE/MX+MV rev 3, Mem @ 0x40000000/26
(II) Addressable bus resource ranges are
	[0] -1	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0x00000000 - 0x000001ff (0x200) IX[B]E
(II) Active PCI resource ranges:
	[0] -1	0xa0000000 - 0xbfffffff (0x20000000) MX[B]E
	[1] -1	0xffff0000 - 0xffffffff (0x10000) MX[B](B)
	[2] -1	0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
	[3] -1	0x00003164 - 0x00003167 (0x4) IX[B]E
	[4] -1	0x00003160 - 0x0000317f (0x20) IX[B]E
	[5] -1	0x00003150 - 0x0000315f (0x10) IX[B]E
	[6] -1	0x00003140 - 0x0000317f (0x40) IX[B]E
	[7] -1	0x00003100 - 0x000031ff (0x100) IX[B]E
	[8] -1	0x0000f300 - 0x0000f3ff (0x100) IX[B]E
	[9] -1	0x00001100 - 0x000011ff (0x100) IX[B]E
(II) PCI I/O resource overlap reduced 0x00003160 from 0x0000317f to 0x00003163
(II) PCI I/O resource overlap reduced 0x00003140 from 0x0000317f to 0x0000314f
(II) PCI I/O resource overlap reduced 0x00003100 from 0x000031ff to 0x0000313f
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0xa0000000 - 0xbfffffff (0x20000000) MX[B]E
	[1] -1	0xffff0000 - 0xffffffff (0x10000) MX[B](B)
	[2] -1	0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
	[3] -1	0x00003164 - 0x00003167 (0x4) IX[B]E
	[4] -1	0x00003160 - 0x00003163 (0x4) IX[B]E
	[5] -1	0x00003150 - 0x0000315f (0x10) IX[B]E
	[6] -1	0x00003140 - 0x0000314f (0x10) IX[B]E
	[7] -1	0x00003100 - 0x0000313f (0x40) IX[B]E
	[8] -1	0x0000f300 - 0x0000f3ff (0x100) IX[B]E
	[9] -1	0x00001100 - 0x000011ff (0x100) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0xffe00000 - 0xffefffff (0x100000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0x00000000 - 0x000001ff (0x200) IX[B]E
(II) All system resource ranges:
	[0] -1	0xffe00000 - 0xffefffff (0x100000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xa0000000 - 0xbfffffff (0x20000000) MX[B]E
	[6] -1	0xffff0000 - 0xffffffff (0x10000) MX[B](B)
	[7] -1	0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
	[8] -1	0x00000000 - 0x000001ff (0x200) IX[B]E
	[9] -1	0x00003164 - 0x00003167 (0x4) IX[B]E
	[10] -1	0x00003160 - 0x00003163 (0x4) IX[B]E
	[11] -1	0x00003150 - 0x0000315f (0x10) IX[B]E
	[12] -1	0x00003140 - 0x0000314f (0x10) IX[B]E
	[13] -1	0x00003100 - 0x0000313f (0x40) IX[B]E
	[14] -1	0x0000f300 - 0x0000f3ff (0x100) IX[B]E
	[15] -1	0x00001100 - 0x000011ff (0x100) IX[B]E
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.3
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.13.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.1.8
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.3
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.3
(II) LoadModule: "extmod"
(II) Reloading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) LoadModule: "s3virge"
(II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o
(II) Module s3virge: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.5.0
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.3
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.1
	S3VIdentify
(II) S3VIRGE: driver (version 1.5.0) for S3 ViRGE chipsets: virge, 86C325,
	virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2,
	86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365,
	trio 3d/2x, 86C362, 86C368
(II) Primary Device is: PCI 01:01:0
	S3VProbe begin
(--) Assigning device section with no busID to primary device
(**) Chipset override: virge mx+
(**) Chipset virge mx+ found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0xffe00000 - 0xffefffff (0x100000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xa0000000 - 0xbfffffff (0x20000000) MX[B]E
	[6] -1	0xffff0000 - 0xffffffff (0x10000) MX[B](B)
	[7] -1	0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
	[8] -1	0x00000000 - 0x000001ff (0x200) IX[B]E
	[9] -1	0x00003164 - 0x00003167 (0x4) IX[B]E
	[10] -1	0x00003160 - 0x00003163 (0x4) IX[B]E
	[11] -1	0x00003150 - 0x0000315f (0x10) IX[B]E
	[12] -1	0x00003140 - 0x0000314f (0x10) IX[B]E
	[13] -1	0x00003100 - 0x0000313f (0x40) IX[B]E
	[14] -1	0x0000f300 - 0x0000f3ff (0x100) IX[B]E
	[15] -1	0x00001100 - 0x000011ff (0x100) IX[B]E
	S3VProbe end
(II) resource ranges after probing:
	[0] -1	0xffe00000 - 0xffefffff (0x100000) MX[B](B)
	[1] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0xa0000000 - 0xbfffffff (0x20000000) MX[B]E
	[6] -1	0xffff0000 - 0xffffffff (0x10000) MX[B](B)
	[7] -1	0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
	[8] 0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[9] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[10] 0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[11] -1	0x00000000 - 0x000001ff (0x200) IX[B]E
	[12] -1	0x00003164 - 0x00003167 (0x4) IX[B]E
	[13] -1	0x00003160 - 0x00003163 (0x4) IX[B]E
	[14] -1	0x00003150 - 0x0000315f (0x10) IX[B]E
	[15] -1	0x00003140 - 0x0000314f (0x10) IX[B]E
	[16] -1	0x00003100 - 0x0000313f (0x40) IX[B]E
	[17] -1	0x0000f300 - 0x0000f3ff (0x100) IX[B]E
	[18] -1	0x00001100 - 0x000011ff (0x100) IX[B]E
	[19] 0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[20] 0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
	S3VPreInit 1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.3
(**) S3VIRGE(0): Depth 16, (--) framebuffer bpp 16
(==) S3VIRGE(0): RGB weight 565
(==) S3VIRGE(0): Default visual is TrueColor
	S3VGetRec
(**) S3VIRGE(0): Option "HWCursor" "on"
(**) S3VIRGE(0): Option "ShadowFB" "off"
(**) S3VIRGE(0): Option "UseFB" "on"
(**) S3VIRGE(0): Using HW Cursor
(**) S3VIRGE(0): ShadowFB disabled.
(**) S3VIRGE(0): Using fb (not cfb).
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) S3VIRGE(0): initializing int10
(II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000
(II) S3VIRGE(0): VESA BIOS detected
(II) S3VIRGE(0): VESA VBE Version 2.0
(II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB
(II) S3VIRGE(0): VESA VBE OEM: S3 Incorporated. M5 BIOS
(II) S3VIRGE(0): VESA VBE OEM Software Rev: 1.0
(II) S3VIRGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) S3VIRGE(0): VESA VBE OEM Product: VBE 2.0
(II) S3VIRGE(0): VESA VBE OEM Product Rev: Rev 1.1
(**) S3VIRGE(0): Chipset: "virge mx+"
	S3VMapMem
	S3VEnableMmio
	S3VPreInit vgaCRIndex=3d4, vgaIOBase=3d0, MMIOBase=40250000
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) S3VIRGE(0): VESA VBE DDC supported
(II) S3VIRGE(0): VESA VBE DDC Level none
(II) S3VIRGE(0): VESA VBE DDC transfer in appr. 0 sec.
(--) S3VIRGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.2.0
	ABI class: XFree86 Video Driver, version 0.3
(II) S3VIRGE(0): I2C bus "I2C bus" initialized.
(II) S3VIRGE(0): I2C device "I2C bus:ddc2" registered.
(II) S3VIRGE(0): I2C device "I2C bus:ddc2" removed.
(==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) S3VIRGE(0): videoram:  4096k
(--) S3VIRGE(0): assuming RefCLK value of 14.318 MHz
(--) S3VIRGE(0): Detected current MCLK value of 83.045 MHz
(--) S3VIRGE(0): LCD size 800x600, clock 39.972 MHz
	S3VDisableMmio
	S3VPreInit minClock=20000, maxClock=270000
(II) S3VIRGE(0): Generic Monitor: Using hsync range of 28.00-38.00 kHz
(II) S3VIRGE(0): Generic Monitor: Using vrefresh range of 43.00-72.00 Hz
(II) S3VIRGE(0): Clock range:  20.00 to 270.00 MHz
(WW) S3VIRGE(0): Default mode "640x350" deleted (vrefresh out of range)
(WW) S3VIRGE(0): Default mode "640x400" deleted (vrefresh out of range)
(WW) S3VIRGE(0): Default mode "720x400" deleted (vrefresh out of range)
(WW) S3VIRGE(0): Default mode "640x480" deleted (vrefresh out of range)
(WW) S3VIRGE(0): Default mode "640x480" deleted (vrefresh out of range)
(WW) S3VIRGE(0): Default mode "640x480" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "800x600" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "800x600" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "800x600" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "1024x768" deleted (vrefresh out of range)
(WW) S3VIRGE(0): Default mode "1024x768" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "1024x768" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "1024x768" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "1024x768" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "1152x864" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "1280x960" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "1280x960" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "1280x1024" deleted (hsync out of range)
(WW) S3VIRGE(0): Default mode "1600x1200" deleted (horizontal timing out of range)
(WW) S3VIRGE(0): Default mode "1600x1200" deleted (horizontal timing out of range)
(WW) S3VIRGE(0): Default mode "1600x1200" deleted (horizontal timing out of range)
(WW) S3VIRGE(0): Default mode "1600x1200" deleted (horizontal timing out of range)
(WW) S3VIRGE(0): Default mode "1600x1200" deleted (horizontal timing out of range)
(WW) S3VIRGE(0): Default mode "1792x1344" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1792x1344" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1856x1392" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1856x1392" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1920x1440" deleted (insufficient memory for mode)
(WW) S3VIRGE(0): Default mode "1920x1440" deleted (insufficient memory for mode)
(--) S3VIRGE(0): Virtual size is 800x600 (pitch 800)
(**) S3VIRGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(++) S3VIRGE(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.0.1g, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.3
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0x40000000 - 0x43ffffff (0x4000000) MS[B]
	[1] -1	0xffe00000 - 0xffefffff (0x100000) MX[B](B)
	[2] -1	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0xa0000000 - 0xbfffffff (0x20000000) MX[B]E
	[7] -1	0xffff0000 - 0xffffffff (0x10000) MX[B](B)
	[8] -1	0x40000000 - 0x43ffffff (0x4000000) MX[B](B)
	[9] 0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[10] 0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[11] 0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[12] -1	0x00000000 - 0x000001ff (0x200) IX[B]E
	[13] -1	0x00003164 - 0x00003167 (0x4) IX[B]E
	[14] -1	0x00003160 - 0x00003163 (0x4) IX[B]E
	[15] -1	0x00003150 - 0x0000315f (0x10) IX[B]E
	[16] -1	0x00003140 - 0x0000314f (0x10) IX[B]E
	[17] -1	0x00003100 - 0x0000313f (0x40) IX[B]E
	[18] -1	0x0000f300 - 0x0000f3ff (0x100) IX[B]E
	[19] -1	0x00001100 - 0x000011ff (0x100) IX[B]E
	[20] 0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[21] 0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
	S3VScreenInit
	S3VMapMem
(==) S3VIRGE(0): Write-combining range (0x40000000,0x400000)
	S3VEnableMmio
	S3VSave
(II) S3VIRGE(0): MMPR regs: ffffffff ffffffff ffffffff ffffffff


ViRGE driver: saved current video mode. Register dump:

(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
  67

CR[00-2f]
  5f 4f 50 82  55 81 bf 1f  00 47 06 07  00 00 3f ff  
  9c 8e 8f 28  1f 96 b9 a3  ff ff ff ff  ff ff ff ff  
  ff ff 00 ff  30 30 30 30  30 30 30 30  30 8c 03 03  
  
SR[00-27]
  03 00 03 00  02 05 06 07  06 5e 40 00  0c 50 00 00  
  43 72 c1 41  00 02 00 00  20 20 40 9f  fc 3e 9c 33  
  ff 88 c2 36  c2 3d 40 e6  

Gr Cont GR[00-0f]
  00 00 00 00  00 10 0e 00  ff f9 fa fb  fc fd fe ff  
  
Att Cont AR[00-1f]
  20 21 22 23  24 25 26 27  28 29 2a 2b  2c 2d 2e 2f  
  0c 00 0f 08  00 35 36 37  0c 00 0f 08  00 3d 3e 3f  
  
CR[30-6f]
  e1 05 40 00  00 00 7e 3b  7b b8 01 00  10 06 2e 40  
  00 03 03 00  00 00 05 7f  78 b4 ff 6d  6f c6 fe f7  
  00 00 00 08  00 00 00 00  43 40 00 00  00 00 00 00  
  08 08 08 00  00 00 00 00  bf a0 80 02  00 ff 00 ff  
  
(II) S3VIRGE(0): END register dump --------------------
	S3VModeInit
	S3VModeInit dclk=40000 
	S3VInitSTREAMS
	S3VWriteMode
	S3VGEReset sub_stat=b000 
(II) S3VIRGE(0): ViRGE driver: done restoring mode, dumping CR registers:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
  2f

CR[00-2f]
  7f 63 63 82  69 19 72 f0  00 60 00 00  00 00 00 00  
  59 2d 57 c8  00 57 00 c3  ff ff ff ff  ff ff ff ff  
  ff ff 00 ff  a0 a0 a0 a0  a0 a0 a0 a0  a0 8c 03 03  
  
SR[00-27]
  03 01 0f 00  0e 05 06 07  06 5e 40 00  0c 50 00 00  
  43 72 c1 41  00 83 00 00  00 20 40 9f  fc 3e 9c 33  
  ff 88 c2 36  c2 3d 40 e6  

Gr Cont GR[00-0f]
  00 00 00 00  00 40 05 0f  ff f9 fa fb  fc fd fe ff  
  
Att Cont AR[00-1f]
  20 21 22 23  24 25 26 27  28 29 2a 2b  2c 2d 2e 2f  
  41 00 0f 00  00 35 36 37  41 00 0f 00  00 3d 3e 3f  
  
CR[30-6f]
  e1 8c 40 20  00 00 7e 3b  7b b8 91 74  3f 06 34 40  
  00 48 48 00  00 00 05 7f  78 b4 ff 6d  6f c6 fe f7  
  00 00 00 08  00 10 00 00  13 40 00 00  00 00 40 40  
  08 08 08 08  08 10 99 54  bf a0 80 02  00 ff 00 ff  
  
(II) S3VIRGE(0): END register dump --------------------
(**) S3VIRGE(0): Using FB
(II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	CPU to Screen color expansion
	Solid Horizontal and Vertical Lines
	Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		14 256x256 slots
(==) S3VIRGE(0): Backing store disabled
(==) S3VIRGE(0): Silken mouse enabled
	S3VDGAInit
	S3VDGAInit firstone vpWid=800, vpHgt=600, Bpp=2, mdbitsPP=16
	S3VHWCursorInit
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "PS/2"
(**) Generic Mouse: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Generic Mouse: Core Pointer
(**) Option "Device" "/dev/gpmdata"
(==) Generic Mouse: Buttons: 3
(II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE)
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VGEReset called from s3v_accel.c line 454
	S3VGEReset sub_stat=b000 
	S3VWriteMode
	S3VGEReset sub_stat=b000 
(II) S3VIRGE(0): ViRGE driver: done restoring mode, dumping CR registers:
(II) S3VIRGE(0): START register dump ------------------
Misc Out[3CC]
  67

CR[00-2f]
  5f 4f 50 82  55 81 bf 1f  00 47 06 07  00 00 3f ff  
  9c 8e 8f 28  1f 96 b9 a3  ff ff ff ff  ff ff ff ff  
  ff ff c6 ff  a0 a0 a0 a0  a0 a0 a0 a0  a0 8c 03 03  
  
SR[00-27]
  03 00 03 00  02 05 06 07  06 5e 40 00  0c 50 00 00  
  43 72 c1 41  00 02 00 00  20 20 40 9f  fc 3e 9c 33  
  ff 88 c2 36  c2 3d 40 e6  

Gr Cont GR[00-0f]
  00 00 00 00  00 10 0e 00  ff f9 fa fb  fc fd fe ff  
  
Att Cont AR[00-1f]
  20 21 22 23  24 25 26 27  28 29 2a 2b  2c 2d 2e 2f  
  0c 00 0f 08  00 35 36 37  0c 00 0f 08  00 3d 3e 3f  
  
CR[30-6f]
  e1 05 40 00  00 00 7e 3b  7b b8 01 00  10 06 19 40  
  00 03 03 00  00 00 01 79  79 54 00 ff  ff ff c0 c0  
  00 00 00 08  00 00 00 00  43 40 00 00  00 00 00 00  
  08 08 08 00  00 00 00 00  bf a0 80 02  00 ff 00 ff  
  
(II) S3VIRGE(0): END register dump --------------------
	S3VDisableMmio



-- System Information
Debian Release: woody
Architecture: i386
Kernel: Linux mobile 2.2.18pre18 #4 Sun Oct 29 19:33:02 GMT 2000 i686

Versions of packages xserver-xfree86 depends on:
ii  debconf                       0.5.29     Debian configuration management sy
ii  libc6                         2.2-4      GNU C Library: Shared libraries an
ii  xserver-common                4.0.1-9    files and utilities common to all 
ii  zlib1g                        1:1.1.3-11 compression library - runtime     


--- End Message ---
--- Begin Message ---
Unfortunately, with nobody able to reproduce the bug, there's not much point in
leaving it open.  If someone with the hardware finds this bug again, they can
and should report it as a new but.

-- 
Nathanael Nerode  <neroden@fastmail.fm>

"(Instead, we front-load the flamewars and grudges in
the interest of efficiency.)" --Steve Lanagasek,
http://lists.debian.org/debian-devel/2005/09/msg01056.html

--- End Message ---

Reply to: