Bug#308610: xserver-xfree86: Monitor rolls with resolution > VGA (640x480)

To: Debian Bug Tracking System <308610@bugs.debian.org>
Subject: Bug#308610: xserver-xfree86: Monitor rolls with resolution > VGA (640x480)
From: "Charles P. Pouliot" <cpp973@cheerful.com>
Date: Thu, 11 Aug 2005 18:04:10 -0400
Message-id: <[🔎] E1E3Pqo-0002xU-00@spohr.debian.org>
Reply-to: "Charles P. Pouliot" <cpp973@cheerful.com>, 308610@bugs.debian.org
Package: xserver-xfree86
Version: 4.3.0.dfsg.1-14
Followup-For: Bug #308610


Package: xserver-xfree86
Version: 4.3.0.1 (Debian 4.3.0.dfsg.1-14 20050601051219
Subject: XFree86 version 4 hardware bug

I cannot start X using the "ati" driver for my Mach64 Chrontel 8398
RAMDAC. The monitor goes VESA power off, and if I try to switch video
modes, my monitor display just rolls out of control.

If I use the "vga" driver or the "ati" driver with a color depth of 4,
causing it to use the VGA CRT controller, I am able to get a 640x480
display, and a very flickery 800x600 display.

My hardware: ViewSonic 17GS monitor, ATI Mach64 video card detected as
ATI 88800GX-D graphics controller, Pentium-120 with PCI and ISA slots.
My monitor reports the Display frequency being sent to it, which
assisted the below diagnosis.
My software: Linux kernel 2.2.19, xfree86 4.3.0.1 (Debian sarge)

My investigation into the matter revealed that for 640x480 display,
there is no relationship between the timings I put in my XConfig file
and the actual refresh rates reported by my monitor.  For a 800x600
resolution, there is an error in the calculations of the X video
timings:
the faster I make the Horizontal & Vertical Refresh, the slower they
actually are on the monitor; the slower I make them, the faster they
actually are on the monitor.

In my config file you will see several specific Modelines
I used to test this out.  Here are my results at 800x600:
Modeline  Horizont refresh Vert refresh Horizont refresh Vert refresh
          (as rep by X)   (reprtd by X) (both as reported by monitor)
--------  ---------------- ------------ ---------------- ------------
800x600am   53.7 kHz        85.1 Hz      31.0 kHz         49.2 Hz
800x600bm   48.1 kHz        76.2 Hz      31.3 kHz         49.6 Hz
800x600dm   37.9 kHz        60.3 Hz      30.8 kHz         49.0 Hz
800x600em   35.2 kHz        56.2 Hz      31.8 kHz         50.8 Hz
800x600fm   32.0 kHz        51.4 Hz      32.5 kHz         52.3 Hz
800x600gm   31.2 kHz        50.2 Hz      32.8 kHz         52.7 Hz
800x600hm   22.5 kHz        36.8 Hz      36.6 kHz         59.9 Hz

For the last Modeline, I began with a HTotal of 900 a VTotal of 616
which gave  22.2 kHz        36.1 Hz      36.3 kHz         58.9 Hz
reducing the HTotal to 888 made the most significant difference, 
increasing my actual frequencies (as reported by monitor) to 36.6 kHz
and 59.5 Hz respectively.  Decreasing VTotal from 616 to 612 gave 
the results above.

I tried the NoAccel and NoLinear options together but X locked up on
startup (at the black & white stipple screen, rolling out of control)

I suspect that the ATI CRT controller may suffer the same or a similar
problem; however, once I got the video modes above, I still was not
able to start X with a color depth of 8 - the monitor image still
rolled out of control.  In fact, I think the lower frequency
configurations were worse than the higher frequency configurations.

Looking through the bug log and seeing issues with DPMS, I removed the
DPMS option from my XF86Config-4 file; however, I'm not sure that this
disabled it.

I also tried the newest kernel (2.4.31) from kernel.org.


If I switch back to XFree86 3.3.6 with the XF86_Mach64 server,
everything works fine, so I don't think there's anything inherently
wrong with video card or monitor.

Due to limited resources I am unable to compile the whole X server but
could probably work with a single module such as "ati." I may also be
able to put my hands on an extra Mach64 video card with the Chrontel
8398 RAMDAC. I am also competent at binary hexediting code & data.

XF86Config-4 file and XFree86.0.log attached (included).

-- Package-specific info:
Contents of /var/lib/xfree86/X.roster:
xserver-xfree86

/var/lib/xfree86/X.md5sum does not exist.

X server symlink status:
lrwxrwxrwx  1 root root 24 Aug 11 17:28 /etc/X11/X -> /usr/bin/X11/XF86_Mach64
-rwxr-xr-x  1 root root 1831640 Jan 12  2002 /usr/bin/X11/XF86_Mach64

Contents of /var/lib/xfree86/XF86Config-4.roster:
xserver-xfree86

VGA-compatible devices on PCI bus:
0000:00:0f.0 VGA compatible controller: ATI Technologies Inc 210888GX [Mach64 GX] (rev 01)

/etc/X11/XF86Config-4 does not match checksum in /var/lib/xfree86/XF86Config-4.md5sum.

XFree86 X server configuration file status:
-rw-r--r--  1 root root 5230 Aug  7 13:18 /etc/X11/XF86Config-4

Contents of /etc/X11/XF86Config-4:
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
#   cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
#   md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
#   dpkg-reconfigure xserver-xfree86

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"
	Load	"xtt"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"PS/2"
	Option		"ZAxisMapping"		"4 5"
EndSection
Section "InputDevice"
	Identifier	"Generic Mouse"
	Driver		"mouse"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"ATI Mach64 with CH8398 RAMDAC"
	Driver		"ati"
	BusID		"PCI:0:15:0"
EndSection

Section "Monitor"
	Identifier	"ViewSonic 17GS"
	HorizSync	20.0-57.0
	VertRefresh	30.0-160.0
#	HorizSync	31.5
#	VertRefresh	70.1
	Option		"DPMS"

#All work at 4bpp except 1024x768m and 800x600bm :
#Default mymode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
   Modeline "1024x768m"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
#Default mymode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
#   Modeline "800x600am"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
#Default mymode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
   Modeline "800x600am"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
#Default mymode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
   Modeline "640x480am"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
#Default mymode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
#orig   Modeline "800x600bm"  50   800  856  976 1040    600  637  643  666  +hsync +vsync
   Modeline "800x600bm"  50   800  856  976 1040    600  601  604  631  +hsync +vsync
# 800x600 @ 56 Hz, 35.15 kHz hsync
    ModeLine "800x600em"     36     800  824  896 1024   600  601  603  625
# 800x600 @ 52 Hz, 37.8 kHz hsync
    Modeline "800x600fm"     32     800  808  832 1000   600  601  603  622
# 800x600 @ 50 Hz, 37.8 kHz hsync
    Modeline "800x600gm"     31     800  808  832  992   600  601  603  622
# 800x600 @ 40 Hz, 
#o    Modeline "800x600hm"     24.8   800 808 816 1000   600 601 603 620
    Modeline "800x600hm"     20   800 808 816 888   600 601 603 612
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
    ModeLine "480x300m"     21.656 480  496  536  616   300  301  302  312 Doublescan

#Default mymode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
   Modeline "640x480bm"  31.5    640  664  704  832    480  489  492  520
#Mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
   Modeline "640x400cm"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
#Default mymode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
   ModeLine "640x480dm"   25.175 640 664 760 800 480 491 493 525
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Mach64 with CH8398 RAMDAC"
	Monitor		"ViewSonic 17GS"
	DefaultDepth	4
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"800x600am" "640x480am" "800x600em" "800x600fm" "800x600gm" "800x600hm" "480x300m"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"800x600am" "640x480am" "800x600em" "800x600fm" "800x600gm" "800x600hm" "480x300m"
#		Modes		"1024x768" "800x600" "640x480" "320x200"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
#	InputDevice	"Generic Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection


XFree86 X server log files on system:
-rw-r--r--  1 root root 29344 Aug  5 09:47 /var/log/XFree86.8.log
-rw-rw-r--  1 root root 34936 Aug 11 17:26 /var/log/XFree86.0.log

Contents of most recent XFree86 X server log file
/var/log/XFree86.0.log:
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14 20050601051219 fabbione@fabbione.net)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.29-pre2 i686 [ELF] 
Build Date: 01 June 2005

This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way.  Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.

We strongly encourage the use of the "reportbug" package and command
to ensure that bug reports contain as much useful information as
possible.

Before filing a bug report, you may want to consult the Debian X FAQ:
       XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
  plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz

Module Loader present
OS Kernel: Linux version 2.4.31 (charles@raymond) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #2 Thu Aug 11 14:23:38 EDT 2005 
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Aug 11 17:24:06 2005
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "ViewSonic 17GS"
(**) |   |-->Device "ATI Mach64 with CH8398 RAMDAC"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) `fonts.dir' not found (or not valid) in "/usr/lib/X11/fonts/cyrillic".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/lib/X11/fonts/cyrillic").
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
	Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.2
	XFree86 Video Driver: 0.6
	XFree86 XInput driver : 0.4
	XFree86 Server Extension : 0.2
	XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80007808, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,122d card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,122e card 0000,0000 rev 02 class 06,01,00 hdr 00
(II) PCI: 00:07:1: chip 8086,1230 card 0000,0000 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:0f:0: chip 1002,4758 card 0000,0000 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:15:0) ATI Technologies Inc 210888GX [Mach64 GX] rev 1, Mem @ 0xff000000/23
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[1] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[1] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o":  No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 2.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.13.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o":  No symbols found
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "xtt"
(II) Loading /usr/X11R6/lib/modules/fonts/libxtt.a
(II) Module xtt: vendor="X-TrueType Server Project & After X-TT Project"
	compiled for 4.3.0.1, module version = 1.4.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font xtt
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 6.5.5
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.5) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
	ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
	ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
	ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
	ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
	ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
	ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
	ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
	ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
	ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
	ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
	ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP),
	ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon 9200PRO 5960 (AGP), ATI Radeon 9200 5961 (AGP),
	ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
	ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600 (M10) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2 (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP)
(II) Primary Device is: PCI 00:0f:0
(II) ATI:  Candidate "Device" section "ATI Mach64 with CH8398 RAMDAC".
(II) ATI:  Shared PCI Mach64 in slot 0:15:0 with sparse PIO base 0x02EC detected.
(II) ATI:  VGA Wonder at I/O port 0x01CE detected.
(II) ATI:  Shared PCI Mach64 in slot 0:15:0 assigned to active "Device" section "ATI Mach64 with CH8398 RAMDAC".
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 6.5.5
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[6] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[7] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[8] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[9] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[10] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[11] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
	[12] 0	0	0x000002ec - 0x000003fc  IS[S]
	[13] 0	0	0x000001ce - 0x0000f3fe  IS[S]
	[14] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[15] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) ATI(0): Chipset:  "ati".
(**) ATI(0): Depth 4, (--) framebuffer bpp 4
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(WW) System lacks support for changing MTRRs
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 1.2
(II) ATI(0): VESA VBE Total Mem: 2048 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(II) ATI(0): BIOS Data:  BIOSSize=0x8000, ROMTable=0x00EE.
(II) ATI(0): BIOS Data:  ClockTable=0x58D4, FrequencyTable=0x58CE.
(II) ATI(0): BIOS Data:  LCDTable=0x0000, LCDPanelInfo=0x0000.
(II) ATI(0): BIOS Data:  VideoTable=0x0000, HardwareTable=0x0000.
(II) ATI(0): BIOS Data:  I2CType=0x00, Tuner=0x00, Decoder=0x00, Audio=0x0F.
(--) ATI(0): ATI 88800GX-D graphics controller detected.
(--) ATI(0): Chip type 4758 "GX", class 0, revision 0x01.
(--) ATI(0): PCI bus interface detected;  sparse I/O base is 0x02EC.
(--) ATI(0): VGA Wonder registers at I/O port 0x01CE.
(--) ATI(0): ATI Mach64 adapter detected.
(--) ATI(0): Chrontel 8398 or similar RAMDAC detected.
(==) ATI(0): RGB weight 666
(==) ATI(0): Default visual is StaticColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using VGA CRTC.
(!!) ATI(0): VideoRAM reduced to 1024 kB due to hardware limitations.
(WW) ATI(0): Linear aperture not supported in this configuration.
(WW) ATI(0): Acceleration not supported in this configuration.
(--) ATI(0): 2048 kB of DRAM (256Kx4) detected (using 1024 kB).
(WW) ATI(0): Cannot shadow a banked frame buffer.
(--) ATI(0): Chrontel 8398 or similar programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(0): ViewSonic 17GS: Using hsync range of 20.00-57.00 kHz
(II) ATI(0): ViewSonic 17GS: Using vrefresh range of 30.00-160.00 Hz
(II) ATI(0): Clock range:   2.00 to  80.00 MHz
(II) ATI(0): Not using mode "1024x768m" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "576x432" (hsync out of range)
(II) ATI(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x512" (hsync out of range)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1152x768" (width too large for virtual size)
(II) ATI(0): Not using default mode "1024x768" (width too large for virtual size)
(II) ATI(0): Not using default mode "1024x768" (width too large for virtual size)
(II) ATI(0): Not using default mode "1024x768" (width too large for virtual size)
(II) ATI(0): Not using default mode "832x624" (width too large for virtual size)
(--) ATI(0): Virtual size is 800x600 (pitch 800)
(**) ATI(0): *Mode "800x600am": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) ATI(0): Modeline "800x600am"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) ATI(0): *Mode "640x480am": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) ATI(0): Modeline "640x480am"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) ATI(0): *Mode "800x600em": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) ATI(0): Modeline "800x600em"   36.00  800 824 896 1024  600 601 603 625
(**) ATI(0): *Mode "800x600fm": 32.0 MHz, 32.0 kHz, 51.4 Hz
(II) ATI(0): Modeline "800x600fm"   32.00  800 808 832 1000  600 601 603 622
(**) ATI(0): *Mode "800x600gm": 31.0 MHz, 31.2 kHz, 50.2 Hz
(II) ATI(0): Modeline "800x600gm"   31.00  800 808 832 992  600 601 603 622
(**) ATI(0): *Mode "800x600hm": 20.0 MHz, 22.5 kHz, 36.8 Hz
(II) ATI(0): Modeline "800x600hm"   20.00  800 808 816 888  600 601 603 612
(**) ATI(0): *Mode "480x300m": 21.7 MHz, 35.2 kHz, 56.3 Hz (D)
(II) ATI(0): Modeline "480x300m"   21.66  480 496 536 616  300 301 302 312 doublescan
(**) ATI(0):  Mode "800x600bm": 50.0 MHz, 48.1 kHz, 76.2 Hz
(II) ATI(0): Modeline "800x600bm"   50.00  800 856 976 1040  600 601 604 631 +hsync +vsync
(**) ATI(0):  Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) ATI(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) ATI(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) ATI(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) ATI(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) ATI(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) ATI(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) ATI(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) ATI(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) ATI(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) ATI(0):  Mode "640x480bm": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) ATI(0): Modeline "640x480bm"   31.50  640 664 704 832  480 489 492 520
(**) ATI(0):  Mode "640x480dm": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) ATI(0): Modeline "640x480dm"   25.18  640 664 760 800  480 491 493 525
(**) ATI(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) ATI(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) ATI(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) ATI(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) ATI(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) ATI(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) ATI(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) ATI(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) ATI(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) ATI(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) ATI(0):  Mode "640x400cm": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline "640x400cm"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) ATI(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) ATI(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(**) ATI(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) ATI(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) ATI(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) ATI(0): Modeline "512x384"   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync
(**) ATI(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) ATI(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) ATI(0):  Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) ATI(0): Modeline "512x384"   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync
(**) ATI(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) ATI(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) ATI(0):  Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
(**) ATI(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) ATI(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) ATI(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) ATI(0): Modeline "400x300"   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) ATI(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) ATI(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) ATI(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) ATI(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) ATI(0):  Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) ATI(0): Modeline "320x240"   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync
(**) ATI(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) ATI(0): Modeline "320x240"   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync
(**) ATI(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) ATI(0): Modeline "320x240"   15.75  320 332 352 416  240 244 245 260 doublescan -hsync -vsync
(**) ATI(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) ATI(0): Modeline "320x240"   12.60  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(**) ATI(0):  Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) ATI(0): Modeline "360x200"   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync
(**) ATI(0):  Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "320x200"   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync
(**) ATI(0):  Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "320x175"   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync
(++) ATI(0): DPI set to (100, 100)
(II) Loading sub module "xf4bpp"
(II) LoadModule: "xf4bpp"
(II) Loading /usr/X11R6/lib/modules/libxf4bpp.a
(II) Module xf4bpp: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xf1bpp"
(II) LoadModule: "xf1bpp"
(II) Loading /usr/X11R6/lib/modules/libxf1bpp.a
(II) Module xf1bpp: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.2.0
	ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xff000000 - 0xff7fffff (0x800000) MS[B]
	[1] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[7] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[8] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[9] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[10] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
	[13] 0	0	0x000002ec - 0x000003fc  IS[S]
	[14] 0	0	0x000001ce - 0x0000f3fe  IS[S]
	[15] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[16] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(==) ATI(0): Backing store disabled
(**) Option "dpms"
(**) ATI(0): DPMS enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "PS/2"
(**) Configured Mouse: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0

   *** If unresolved symbols were reported above, they might not
   *** be the reason for the server aborting.

Fatal server error:
Caught signal 11.  Server aborting


When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.




*** /etc/X11/XF86Config-4
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
#   cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
#   md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
#   dpkg-reconfigure xserver-xfree86

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"
	Load	"xtt"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"PS/2"
	Option		"ZAxisMapping"		"4 5"
EndSection
Section "InputDevice"
	Identifier	"Generic Mouse"
	Driver		"mouse"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"ATI Mach64 with CH8398 RAMDAC"
	Driver		"ati"
	BusID		"PCI:0:15:0"
EndSection

Section "Monitor"
	Identifier	"ViewSonic 17GS"
	HorizSync	20.0-57.0
	VertRefresh	30.0-160.0
#	HorizSync	31.5
#	VertRefresh	70.1
	Option		"DPMS"

#All work at 4bpp except 1024x768m and 800x600bm :
#Default mymode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
   Modeline "1024x768m"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
#Default mymode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
#   Modeline "800x600am"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
#Default mymode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
   Modeline "800x600am"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
#Default mymode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
   Modeline "640x480am"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
#Default mymode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
#orig   Modeline "800x600bm"  50   800  856  976 1040    600  637  643  666  +hsync +vsync
   Modeline "800x600bm"  50   800  856  976 1040    600  601  604  631  +hsync +vsync
# 800x600 @ 56 Hz, 35.15 kHz hsync
    ModeLine "800x600em"     36     800  824  896 1024   600  601  603  625
# 800x600 @ 52 Hz, 37.8 kHz hsync
    Modeline "800x600fm"     32     800  808  832 1000   600  601  603  622
# 800x600 @ 50 Hz, 37.8 kHz hsync
    Modeline "800x600gm"     31     800  808  832  992   600  601  603  622
# 800x600 @ 40 Hz, 
#o    Modeline "800x600hm"     24.8   800 808 816 1000   600 601 603 620
    Modeline "800x600hm"     20   800 808 816 888   600 601 603 612
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
    ModeLine "480x300m"     21.656 480  496  536  616   300  301  302  312 Doublescan

#Default mymode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
   Modeline "640x480bm"  31.5    640  664  704  832    480  489  492  520
#Mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
   Modeline "640x400cm"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
#Default mymode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
   ModeLine "640x480dm"   25.175 640 664 760 800 480 491 493 525
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Mach64 with CH8398 RAMDAC"
	Monitor		"ViewSonic 17GS"
	DefaultDepth	4
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"800x600am" "640x480am" "800x600em" "800x600fm" "800x600gm" "800x600hm" "480x300m"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"800x600am" "640x480am" "800x600em" "800x600fm" "800x600gm" "800x600hm" "480x300m"
#		Modes		"1024x768" "800x600" "640x480" "320x200"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
#	InputDevice	"Generic Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

*** /var/log/XFree86.0.log
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14 20050601051219 fabbione@fabbione.net)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.29-pre2 i686 [ELF] 
Build Date: 01 June 2005

This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way.  Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.

We strongly encourage the use of the "reportbug" package and command
to ensure that bug reports contain as much useful information as
possible.

Before filing a bug report, you may want to consult the Debian X FAQ:
       XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
  plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz

Module Loader present
OS Kernel: Linux version 2.4.31 (charles@raymond) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #2 Thu Aug 11 14:23:38 EDT 2005 
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Aug 11 17:24:06 2005
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "ViewSonic 17GS"
(**) |   |-->Device "ATI Mach64 with CH8398 RAMDAC"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) `fonts.dir' not found (or not valid) in "/usr/lib/X11/fonts/cyrillic".
	Entry deleted from font path.
	(Run 'mkfontdir' on "/usr/lib/X11/fonts/cyrillic").
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
	Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.2
	XFree86 Video Driver: 0.6
	XFree86 XInput driver : 0.4
	XFree86 Server Extension : 0.2
	XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80007808, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,122d card 0000,0000 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,122e card 0000,0000 rev 02 class 06,01,00 hdr 00
(II) PCI: 00:07:1: chip 8086,1230 card 0000,0000 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:0f:0: chip 1002,4758 card 0000,0000 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,0), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:15:0) ATI Technologies Inc 210888GX [Mach64 GX] rev 1, Mem @ 0xff000000/23
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[1] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[1] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o":  No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 2.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.13.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o":  No symbols found
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "xtt"
(II) Loading /usr/X11R6/lib/modules/fonts/libxtt.a
(II) Module xtt: vendor="X-TrueType Server Project & After X-TT Project"
	compiled for 4.3.0.1, module version = 1.4.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font xtt
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 6.5.5
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.5) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
	ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
	ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
	ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
	ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
	ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
	ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
	ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
	ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
	ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
	ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
	ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP),
	ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon 9200PRO 5960 (AGP), ATI Radeon 9200 5961 (AGP),
	ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
	ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600 (M10) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2 (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP)
(II) Primary Device is: PCI 00:0f:0
(II) ATI:  Candidate "Device" section "ATI Mach64 with CH8398 RAMDAC".
(II) ATI:  Shared PCI Mach64 in slot 0:15:0 with sparse PIO base 0x02EC detected.
(II) ATI:  VGA Wonder at I/O port 0x01CE detected.
(II) ATI:  Shared PCI Mach64 in slot 0:15:0 assigned to active "Device" section "ATI Mach64 with CH8398 RAMDAC".
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.o
(II) Module atimisc: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 6.5.5
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[6] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[7] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[8] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[9] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[10] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[11] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
	[12] 0	0	0x000002ec - 0x000003fc  IS[S]
	[13] 0	0	0x000001ce - 0x0000f3fe  IS[S]
	[14] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[15] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(==) ATI(0): Chipset:  "ati".
(**) ATI(0): Depth 4, (--) framebuffer bpp 4
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) ATI(0): Primary V_BIOS segment is: 0xc000
(WW) System lacks support for changing MTRRs
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) ATI(0): VESA BIOS detected
(II) ATI(0): VESA VBE Version 1.2
(II) ATI(0): VESA VBE Total Mem: 2048 kB
(II) ATI(0): VESA VBE OEM: ATI MACH64
(II) ATI(0): BIOS Data:  BIOSSize=0x8000, ROMTable=0x00EE.
(II) ATI(0): BIOS Data:  ClockTable=0x58D4, FrequencyTable=0x58CE.
(II) ATI(0): BIOS Data:  LCDTable=0x0000, LCDPanelInfo=0x0000.
(II) ATI(0): BIOS Data:  VideoTable=0x0000, HardwareTable=0x0000.
(II) ATI(0): BIOS Data:  I2CType=0x00, Tuner=0x00, Decoder=0x00, Audio=0x0F.
(--) ATI(0): ATI 88800GX-D graphics controller detected.
(--) ATI(0): Chip type 4758 "GX", class 0, revision 0x01.
(--) ATI(0): PCI bus interface detected;  sparse I/O base is 0x02EC.
(--) ATI(0): VGA Wonder registers at I/O port 0x01CE.
(--) ATI(0): ATI Mach64 adapter detected.
(--) ATI(0): Chrontel 8398 or similar RAMDAC detected.
(==) ATI(0): RGB weight 666
(==) ATI(0): Default visual is StaticColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using VGA CRTC.
(!!) ATI(0): VideoRAM reduced to 1024 kB due to hardware limitations.
(WW) ATI(0): Linear aperture not supported in this configuration.
(WW) ATI(0): Acceleration not supported in this configuration.
(--) ATI(0): 2048 kB of DRAM (256Kx4) detected (using 1024 kB).
(WW) ATI(0): Cannot shadow a banked frame buffer.
(--) ATI(0): Chrontel 8398 or similar programmable clock generator detected.
(--) ATI(0): Reference clock 157.5/11 (14.318) MHz.
(II) ATI(0): ViewSonic 17GS: Using hsync range of 20.00-57.00 kHz
(II) ATI(0): ViewSonic 17GS: Using vrefresh range of 30.00-160.00 Hz
(II) ATI(0): Clock range:   2.00 to  80.00 MHz
(II) ATI(0): Not using mode "1024x768m" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (hsync out of range)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "512x384" (hsync out of range)
(II) ATI(0): Not using default mode "1152x864" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "576x432" (hsync out of range)
(II) ATI(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x480" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "640x512" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1600x1200" (horizontal timing out of range)
(II) ATI(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) ATI(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) ATI(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "700x525" (hsync out of range)
(II) ATI(0): Not using default mode "1600x1024" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "800x512" (hsync out of range)
(II) ATI(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) ATI(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) ATI(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) ATI(0): Not using default mode "1152x768" (width too large for virtual size)
(II) ATI(0): Not using default mode "1024x768" (width too large for virtual size)
(II) ATI(0): Not using default mode "1024x768" (width too large for virtual size)
(II) ATI(0): Not using default mode "1024x768" (width too large for virtual size)
(II) ATI(0): Not using default mode "832x624" (width too large for virtual size)
(--) ATI(0): Virtual size is 800x600 (pitch 800)
(**) ATI(0): *Mode "800x600am": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) ATI(0): Modeline "800x600am"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) ATI(0): *Mode "640x480am": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) ATI(0): Modeline "640x480am"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) ATI(0): *Mode "800x600em": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) ATI(0): Modeline "800x600em"   36.00  800 824 896 1024  600 601 603 625
(**) ATI(0): *Mode "800x600fm": 32.0 MHz, 32.0 kHz, 51.4 Hz
(II) ATI(0): Modeline "800x600fm"   32.00  800 808 832 1000  600 601 603 622
(**) ATI(0): *Mode "800x600gm": 31.0 MHz, 31.2 kHz, 50.2 Hz
(II) ATI(0): Modeline "800x600gm"   31.00  800 808 832 992  600 601 603 622
(**) ATI(0): *Mode "800x600hm": 20.0 MHz, 22.5 kHz, 36.8 Hz
(II) ATI(0): Modeline "800x600hm"   20.00  800 808 816 888  600 601 603 612
(**) ATI(0): *Mode "480x300m": 21.7 MHz, 35.2 kHz, 56.3 Hz (D)
(II) ATI(0): Modeline "480x300m"   21.66  480 496 536 616  300 301 302 312 doublescan
(**) ATI(0):  Mode "800x600bm": 50.0 MHz, 48.1 kHz, 76.2 Hz
(II) ATI(0): Modeline "800x600bm"   50.00  800 856 976 1040  600 601 604 631 +hsync +vsync
(**) ATI(0):  Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) ATI(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) ATI(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) ATI(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) ATI(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) ATI(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) ATI(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) ATI(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) ATI(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) ATI(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) ATI(0):  Mode "640x480bm": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) ATI(0): Modeline "640x480bm"   31.50  640 664 704 832  480 489 492 520
(**) ATI(0):  Mode "640x480dm": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) ATI(0): Modeline "640x480dm"   25.18  640 664 760 800  480 491 493 525
(**) ATI(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) ATI(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) ATI(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) ATI(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) ATI(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) ATI(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) ATI(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) ATI(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) ATI(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) ATI(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) ATI(0):  Mode "640x400cm": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline "640x400cm"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) ATI(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) ATI(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) ATI(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(**) ATI(0):  Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) ATI(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) ATI(0):  Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) ATI(0): Modeline "512x384"   37.50  512 524 592 664  384 385 388 403 doublescan -hsync -vsync
(**) ATI(0):  Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) ATI(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) ATI(0):  Default mode "512x384": 22.4 MHz, 35.5 kHz, 87.1 Hz (D)
(II) ATI(0): Modeline "512x384"   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync
(**) ATI(0):  Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) ATI(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) ATI(0):  Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
(**) ATI(0):  Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) ATI(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) ATI(0):  Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) ATI(0): Modeline "400x300"   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) ATI(0):  Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) ATI(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(**) ATI(0):  Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) ATI(0): Modeline "400x300"   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync
(**) ATI(0):  Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D)
(II) ATI(0): Modeline "320x240"   18.00  320 348 376 416  240 240 242 254 doublescan -hsync -vsync
(**) ATI(0):  Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) ATI(0): Modeline "320x240"   15.75  320 328 360 420  240 240 242 250 doublescan -hsync -vsync
(**) ATI(0):  Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) ATI(0): Modeline "320x240"   15.75  320 332 352 416  240 244 245 260 doublescan -hsync -vsync
(**) ATI(0):  Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) ATI(0): Modeline "320x240"   12.60  320 328 376 400  240 245 246 262 doublescan -hsync -vsync
(**) ATI(0):  Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D)
(II) ATI(0): Modeline "360x200"   17.75  360 378 414 468  200 200 202 223 doublescan -hsync +vsync
(**) ATI(0):  Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "320x200"   15.75  320 336 368 416  200 200 202 222 doublescan -hsync +vsync
(**) ATI(0):  Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D)
(II) ATI(0): Modeline "320x175"   15.75  320 336 368 416  175 191 192 222 doublescan +hsync -vsync
(++) ATI(0): DPI set to (100, 100)
(II) Loading sub module "xf4bpp"
(II) LoadModule: "xf4bpp"
(II) Loading /usr/X11R6/lib/modules/libxf4bpp.a
(II) Module xf4bpp: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xf1bpp"
(II) LoadModule: "xf1bpp"
(II) Loading /usr/X11R6/lib/modules/libxf1bpp.a
(II) Module xf1bpp: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.2.0
	ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xff000000 - 0xff7fffff (0x800000) MS[B]
	[1] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0xff000000 - 0xff7fffff (0x800000) MX[B](B)
	[7] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[8] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[9] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[10] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0	0x0000ffa0 - 0x0000ffbf (0x20) IX[B]E
	[13] 0	0	0x000002ec - 0x000003fc  IS[S]
	[14] 0	0	0x000001ce - 0x0000f3fe  IS[S]
	[15] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[16] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(==) ATI(0): Backing store disabled
(**) Option "dpms"
(**) ATI(0): DPMS enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "PS/2"
(**) Configured Mouse: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0

   *** If unresolved symbols were reported above, they might not
   *** be the reason for the server aborting.

Fatal server error:
Caught signal 11.  Server aborting


When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.



-- System Information:
Debian Release: 3.1
Architecture: i386 (i586)
Kernel: Linux 2.4.31
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages xserver-xfree86 depends on:
ii  debconf [debconf-2.0]    1.4.30.13       Debian configuration management sy
ii  libc6                    2.3.2.ds1-22    GNU C Library: Shared libraries an
ii  libgcc1                  1:3.4.3-13      GCC support library
ii  xfree86-common           4.3.0.dfsg.1-14 X Window System (XFree86) infrastr
ii  xserver-common           4.3.0.dfsg.1-14 files and utilities common to all 
ii  zlib1g                   1:1.2.2-4       compression library - runtime

-- debconf information:
* xserver-xfree86/config/device/identifier: ATI Mach64 with CH8398 RAMDAC
* xserver-xfree86/config/monitor/screen-size: 17 inches (430 mm)
  xserver-xfree86/config/device/use_fbdev:
* xserver-xfree86/config/monitor/selection-method: Simple
  xserver-xfree86/config/doublequote_in_string_error:
* shared/default-x-server: xserver-xfree86
* xserver-xfree86/config/inputdevice/mouse/emulate3buttons: false
* xserver-xfree86/config/device/bus_id: PCI:0:15:0
* xserver-xfree86/config/inputdevice/keyboard/layout: us
* xserver-xfree86/config/monitor/horiz-sync: 30-70
* xserver-xfree86/config/monitor/identifier: ViewSonic 17GS
  shared/no_known_x-server:
  xserver-xfree86/autodetect_mouse: true
* xserver-xfree86/config/device/video_ram:
  xserver-xfree86/config/monitor/mode-list: 1280x960 @ 60Hz
* xserver-xfree86/config/monitor/lcd: false
  xserver-xfree86/config/inputdevice/keyboard/internal:
* xserver-xfree86/config/inputdevice/keyboard/rules: xfree86
  xserver-xfree86/multiple_possible_x-drivers:
* xserver-xfree86/config/inputdevice/keyboard/model: pc104
* xserver-xfree86/config/write_dri_section: true
* xserver-xfree86/config/device/driver: ati
* xserver-xfree86/config/monitor/vert-refresh: 50-160
* xserver-xfree86/config/display/default_depth: 16
* xserver-xfree86/config/inputdevice/mouse/zaxismapping: true
* xserver-xfree86/config/display/modes: 1024x768, 800x600, 640x480
* xserver-xfree86/config/device/bus_id_error:
* xserver-xfree86/config/modules: GLcore, bitmap, dbe, ddc, dri, extmod, freetype, glx, int10, record, speedo, type1, vbe, xtt
* xserver-xfree86/config/inputdevice/keyboard/options:
  xserver-xfree86/config/nonnumeric_string_error:
* xserver-xfree86/config/inputdevice/mouse/protocol: PS/2
  shared/multiple_possible_x-servers:
* xserver-xfree86/config/null_string_error:
  xserver-xfree86/config/monitor/range_input_error:
* xserver-xfree86/autodetect_video_card: false
* xserver-xfree86/config/inputdevice/keyboard/variant:
* xserver-xfree86/config/inputdevice/mouse/port: /dev/psaux
* xserver-xfree86/config/write_files_section: true
  xserver-xfree86/autodetect_monitor: true
Reply to:
Follow-Ups:
- Bug#308610: xserver-xfree86: Monitor rolls with resolution > VGA (640x480)
  - From: Siward de Groot <siward@wanadoo.nl>
Prev by Date: Bug#322659: xserver-xorg: why recommends discover1, not discover? (synaptics problem)
Next by Date: Re: X Strike Force X.Org X11 SVN commit: r524 - in trunk/debian: . scripts
Previous by thread: Bug#322659: xserver-xorg: why recommends discover1, not discover? (synaptics problem)
Next by thread: Bug#308610: xserver-xfree86: Monitor rolls with resolution > VGA (640x480)
Index(es):
- Date
- Thread