Bug#315315: xserver-xfree86: accel disabled on ct69000

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: Bug#315315: xserver-xfree86: accel disabled on ct69000
From: Dan Christensen <jdc@uwo.ca>
Date: Tue, 21 Jun 2005 16:35:40 -0400
Message-id: <[🔎] E1DkpTB-0001AQ-00@localhost.localdomain>
Reply-to: Dan Christensen <jdc@uwo.ca>, 315315@bugs.debian.org
Package: xserver-xfree86
Version: 4.3.0.dfsg.1-14
Severity: normal


I upgraded from an old (4.1) version of XFree86 to 4.3.0.dfsg.1-14
today, and now acceleration is disabled for my chipset by the driver:

(WW) CHIPS(0): Acceleration is disabled by default on C&T 69000 as it has been reported
to be broken: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=74841

That URL seems to only show one user with a problem, whereas my old
laptop with that chip has uptimes of over a year.  It might make sense
to have acceleration disabled by default, but it would be nice if I
could insist on acceleration by putting

  Option "Accel"

in my config file.  As it is, that machine's poor 300MHz Celeron
has trouble scrolling xterms, and especially with the visual bell
(reverse video) in an xterm.

Thanks,

Dan


-- Package-specific info:
Contents of /var/lib/xfree86/X.roster:
xserver-xfree86

/etc/X11/X target unchanged from checksum in /var/lib/xfree86/X.md5sum.

X server symlink status:
lrwxrwxrwx  1 root root 20 Aug 12  2002 /etc/X11/X -> /usr/bin/X11/XFree86
-rwxr-xr-x  1 root root 1746380 Jun  1 02:03 /usr/bin/X11/XFree86

Contents of /var/lib/xfree86/XF86Config-4.roster:
xserver-xfree86

VGA-compatible devices on PCI bus:
0000:00:02.0 VGA compatible controller: Chips and Technologies F69000 HiQVideo (rev 64)

/var/lib/xfree86/XF86Config-4.md5sum does not exist.

XFree86 X server configuration file status:
-rw-r--r--  1 root root 3196 Jun 21 15:44 /etc/X11/XF86Config-4

Contents of /etc/X11/XF86Config-4:
### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
#   dpkg-reconfigure xserver-xfree86
# as root.  Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"pex5"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"
	Load	"xie"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"everex"
	Option		"XkbLayout"	"us"
	Option		"XkbOptions"	"ctrl:nocaps"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"PS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "InputDevice"
	Identifier	"Generic Mouse"
	Driver		"mouse"
	Option		"SendCoreEvents"	"true"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"Chips & Technologies CT65555/CT69000?"
	Driver		"chips"
	Option		"Accel"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	HorizSync	31.5-57.0
	VertRefresh	50-90
	Option		"DPMS"
EndSection

Section "Screen"
	Option		"Accel"
	Identifier	"Default Screen"
	Device		"Chips & Technologies CT65555/CT69000?"
	Monitor		"Generic Monitor"
	DefaultDepth	16
	SubSection "Display"
		Depth		1
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
	InputDevice	"Generic Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection

### END DEBCONF SECTION


XFree86 X server log files on system:
-rw-r--r--  1 root root 32017 Jun 21 16:24 /var/log/XFree86.0.log

Contents of most recent XFree86 X server log file
/var/log/XFree86.0.log:
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14 20050601051219 fabbione@fabbione.net)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.29-pre2 i686 [ELF] 
Build Date: 01 June 2005

This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way.  Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.

We strongly encourage the use of the "reportbug" package and command
to ensure that bug reports contain as much useful information as
possible.

Before filing a bug report, you may want to consult the Debian X FAQ:
       XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
  plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz

Module Loader present
OS Kernel: Linux version 2.6.12 (root@itchy) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 Tue Jun 21 15:20:39 EDT 2005 
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Jun 21 15:54:16 2005
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "Chips & Technologies CT65555/CT69000?"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "everex"
(**) XKB: model: "everex"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(**) Option "XkbOptions" "ctrl:nocaps"
(**) XKB: options: "ctrl:nocaps"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
	Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.2
	XFree86 Video Driver: 0.6
	XFree86 XInput driver : 0.4
	XFree86 Server Extension : 0.2
	XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80003b58, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7192 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 102c,00c0 card 102c,00c0 rev 64 class 03,00,00 hdr 00
(II) PCI: 00:03:0: chip 125d,1968 card 1111,0001 rev 00 class 04,01,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,80,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 104c,ac17 card 4000,0000 rev 02 class 06,07,00 hdr 82
(II) PCI: 00:0a:1: chip 104c,ac17 card 4800,0000 rev 02 class 06,07,00 hdr 82
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 1: bridge is at (0:10:0), (0,1,4), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 1 I/O range:
	[0] -1	0	0x00004000 - 0x000040ff (0x100) IX[B]
	[1] -1	0	0x00004400 - 0x000044ff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0x0c800000 - 0x0cbfffff (0x400000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0x0c400000 - 0x0c7fffff (0x400000) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 5: bridge is at (0:10:1), (0,5,8), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 5 I/O range:
	[0] -1	0	0x00004800 - 0x000048ff (0x100) IX[B]
	[1] -1	0	0x00004c00 - 0x00004cff (0x100) IX[B]
(II) Bus 5 non-prefetchable memory range:
	[0] -1	0	0x0d000000 - 0x0d3fffff (0x400000) MX[B]
(II) Bus 5 prefetchable memory range:
	[0] -1	0	0x0cc00000 - 0x0cffffff (0x400000) MX[B]
(--) PCI:*(0:2:0) Chips and Technologies F69000 HiQVideo rev 100, Mem @ 0xc0000000/24
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0x30000000 from 0x3fffffff to 0x2fffffff
(II) Active PCI resource ranges:
	[0] -1	0	0x30000000 - 0x2fffffff (0x0) MX[B]O
	[1] -1	0	0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)
	[2] -1	0	0x0000f300 - 0x0000f31f (0x20) IX[B]
	[3] -1	0	0x00001100 - 0x0000110f (0x10) IX[B]
	[4] -1	0	0x00003000 - 0x000030ff (0x100) IX[B]
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0x30000000 - 0x2fffffff (0x0) MX[B]O
	[1] -1	0	0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)
	[2] -1	0	0x0000f300 - 0x0000f31f (0x20) IX[B]
	[3] -1	0	0x00001100 - 0x0000110f (0x10) IX[B]
	[4] -1	0	0x00003000 - 0x000030ff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x30000000 - 0x2fffffff (0x0) MX[B]O
	[6] -1	0	0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[9] -1	0	0x0000f300 - 0x0000f31f (0x20) IX[B]
	[10] -1	0	0x00001100 - 0x0000110f (0x10) IX[B]
	[11] -1	0	0x00003000 - 0x000030ff (0x100) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o":  No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 2.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "pex5"
(WW) Warning, couldn't open module pex5
(II) UnloadModule: "pex5"
(EE) Failed to load module "pex5" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.13.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o":  No symbols found
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "xie"
(WW) Warning, couldn't open module xie
(II) UnloadModule: "xie"
(EE) Failed to load module "xie" (module does not exist, 0)
(II) LoadModule: "chips"
(II) Loading /usr/X11R6/lib/modules/drivers/chips_drv.o
(II) Module chips: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.4
(II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525,
	ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550,
	ct65554, ct65555, ct68554, ct69000, ct69030, ct64200, ct64300
(II) Primary Device is: PCI 00:02:0
(--) Assigning device section with no busID to primary device
(--) Chipset ct69000 found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x30000000 - 0x2fffffff (0x0) MX[B]O
	[6] -1	0	0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[8] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[9] -1	0	0x0000f300 - 0x0000f31f (0x20) IX[B]
	[10] -1	0	0x00001100 - 0x0000110f (0x10) IX[B]
	[11] -1	0	0x00003000 - 0x000030ff (0x100) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x30000000 - 0x2fffffff (0x0) MX[B]O
	[6] -1	0	0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)
	[7] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[8] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[9] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[10] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[11] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[12] -1	0	0x0000f300 - 0x0000f31f (0x20) IX[B]
	[13] -1	0	0x00001100 - 0x0000110f (0x10) IX[B]
	[14] -1	0	0x00003000 - 0x000030ff (0x100) IX[B]
	[15] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[16] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) CHIPS(0): initializing int10
(WW) CHIPS(0): Bad V_BIOS checksum
(II) CHIPS(0): Primary V_BIOS segment is: 0xc000
(II) CHIPS(0): VESA BIOS detected
(II) CHIPS(0): VESA VBE Version 2.0
(II) CHIPS(0): VESA VBE Total Mem: 2048 kB
(II) CHIPS(0): VESA VBE OEM: CHIPS 69000 Super VGA
(II) CHIPS(0): VESA VBE OEM Software Rev: 1.0
(II) CHIPS(0): VESA VBE OEM Vendor: Chips & Technologies, Inc.
(II) CHIPS(0): VESA VBE OEM Product: 69000 Display Controller
(II) CHIPS(0): VESA VBE OEM Product Rev: 2
(**) CHIPS(0): Depth 16, (--) framebuffer bpp 16
(II) CHIPS(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) CHIPS(0): RGB weight 565
(==) CHIPS(0): Default visual is TrueColor
(==) CHIPS(0): Using gamma correction (1.0, 1.0, 1.0)
(**) CHIPS(0): Option "accel"
(WW) CHIPS(0): Acceleration is disabled by default on C&T 69000 as it has been reported
to be broken: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=74841
(==) CHIPS(0): Using HW cursor
(**) CHIPS(0): Enabling linear addressing
(--) CHIPS(0): base address is set at 0xC0000000.
(**) CHIPS(0): Using MMIO
(--) CHIPS(0): VideoRAM: 2048 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) CHIPS(0): VESA VBE DDC supported
(II) CHIPS(0): VESA VBE DDC Level 2
(II) CHIPS(0): VESA VBE DDC transfer in appr. 1 sec.
(II) CHIPS(0): VESA VBE DDC read failed
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.2.0
	ABI class: XFree86 Video Driver, version 0.6
(II) CHIPS(0): I2C bus "DDC" initialized.
(II) CHIPS(0): Probing for DDC1
(--) CHIPS(0): TFT probed
(--) CHIPS(0): LCD
(--) CHIPS(0): Display Size: x=1024; y=768
(--) CHIPS(0): PCI Bus
(--) CHIPS(0): Internal DAC disabled
(--) CHIPS(0): Using programmable clocks
(--) CHIPS(0): Dot clock 0:  25.255 MHz
(--) CHIPS(0): Dot clock 1:  28.310 MHz CRTclk
(--) CHIPS(0): Dot clock 2:  64.982 MHz FPclk
(--) CHIPS(0): Probed memory clock of  83.045 MHz
(==) CHIPS(0): Min pixel clock is  11.000 MHz
(--) CHIPS(0): Max pixel clock is 135.000 MHz
(II) CHIPS(0): Generic Monitor: Using hsync range of 31.50-57.00 kHz
(II) CHIPS(0): Generic Monitor: Using vrefresh range of 50.00-90.00 Hz
(II) CHIPS(0): Clock range:  11.00 to 135.00 MHz
(II) CHIPS(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1024x768" (hsync out of range)
(II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1024x768" (hsync out of range)
(II) CHIPS(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1152x864" (exceeds panel dimensions)
(II) CHIPS(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1152x768" (exceeds panel dimensions)
(II) CHIPS(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) CHIPS(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) CHIPS(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(--) CHIPS(0): Virtual size is 1024x768 (pitch 1024)
(**) CHIPS(0): *Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) CHIPS(0): Modeline "1024x768"   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
(**) CHIPS(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) CHIPS(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) CHIPS(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) CHIPS(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) CHIPS(0):  Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) CHIPS(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) CHIPS(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) CHIPS(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) CHIPS(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) CHIPS(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) CHIPS(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) CHIPS(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) CHIPS(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) CHIPS(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) CHIPS(0):  Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) CHIPS(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) CHIPS(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) CHIPS(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) CHIPS(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) CHIPS(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) CHIPS(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) CHIPS(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) CHIPS(0):  Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz
(II) CHIPS(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) CHIPS(0):  Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) CHIPS(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) CHIPS(0):  Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz
(II) CHIPS(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(++) CHIPS(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xc0000000 - 0xc0ffffff (0x1000000) MS[B]
	[1] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[2] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0x30000000 - 0x2fffffff (0x0) MX[B]O
	[7] -1	0	0xc0000000 - 0xc0ffffff (0x1000000) MX[B](B)
	[8] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
	[9] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
	[10] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
	[11] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[12] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[13] -1	0	0x0000f300 - 0x0000f31f (0x20) IX[B]
	[14] -1	0	0x00001100 - 0x0000110f (0x10) IX[B]
	[15] -1	0	0x00003000 - 0x000030ff (0x100) IX[B]
	[16] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[17] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(==) CHIPS(0): Write-combining range (0xc0000000,0x200000)
(--) CHIPS(0): 524288 bytes off-screen memory available
(==) CHIPS(0): Backing store disabled
(**) Option "dpms"
(**) CHIPS(0): DPMS enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "PS/2"
(**) Configured Mouse: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 5
(**) Option "Protocol" "ImPS/2"
(**) Generic Mouse: Protocol: "ImPS/2"
(**) Option "SendCoreEvents" "true"
(**) Generic Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Generic Mouse: ZAxisMapping: buttons 4 and 5
(**) Generic Mouse: Buttons: 5
(II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) Generic Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
Could not init font path element unix/:7100, removing from list!
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change
(II) PM Event received: Power Status Change


-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (750, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.12
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages xserver-xfree86 depends on:
ii  debconf [debconf-2.0]    1.4.30.13       Debian configuration management sy
ii  libc6                    2.3.2.ds1-22    GNU C Library: Shared libraries an
ii  libgcc1                  1:3.4.3-13      GCC support library
ii  xfree86-common           4.3.0.dfsg.1-14 X Window System (XFree86) infrastr
ii  xserver-common           4.3.0.dfsg.1-14 files and utilities common to all 
ii  zlib1g                   1:1.2.2-4       compression library - runtime

-- debconf information:
* xserver-xfree86/config/device/identifier: Chips & Technologies CT65555/CT69000?
  xserver-xfree86/config/monitor/screen-size: 17 inches (430 mm)
* xserver-xfree86/config/device/use_fbdev: false
* xserver-xfree86/config/monitor/selection-method: Advanced
  xserver-xfree86/config/doublequote_in_string_error:
  shared/default-x-server: xserver-xfree86
* xserver-xfree86/config/inputdevice/mouse/emulate3buttons: true
* xserver-xfree86/config/device/bus_id:
* xserver-xfree86/config/inputdevice/keyboard/layout: us
* xserver-xfree86/config/monitor/horiz-sync: 31.5-57.0
* xserver-xfree86/config/monitor/identifier: Generic Monitor
  shared/no_known_x-server:
  xserver-xfree86/autodetect_mouse: true
* xserver-xfree86/config/device/video_ram:
  xserver-xfree86/config/monitor/mode-list: 1280x960 @ 60Hz
* xserver-xfree86/config/monitor/lcd: true
  xserver-xfree86/config/inputdevice/keyboard/internal:
  xserver-xfree86/clobber_XF86Config-4:
* xserver-xfree86/config/inputdevice/keyboard/rules: xfree86
  xserver-xfree86/multiple_possible_x-drivers:
* xserver-xfree86/config/inputdevice/keyboard/model: everex
* xserver-xfree86/config/write_dri_section: true
* xserver-xfree86/config/device/driver: chips
* xserver-xfree86/config/monitor/vert-refresh: 50-90
* xserver-xfree86/config/display/default_depth: 16
* xserver-xfree86/config/inputdevice/mouse/zaxismapping: true
* xserver-xfree86/config/display/modes: 1024x768
  xserver-xfree86/config/inputdevice/mouse/retry_detection:
  xserver-xfree86/config/device/bus_id_error:
* xserver-xfree86/config/modules: GLcore, bitmap, dbe, ddc, dri, extmod, freetype, glx, int10, record, speedo, type1, vbe
* xserver-xfree86/config/inputdevice/keyboard/options: ctrl:nocaps
  xserver-xfree86/config/nonnumeric_string_error:
* xserver-xfree86/config/inputdevice/mouse/protocol: PS/2
  shared/multiple_possible_x-servers:
  xserver-xfree86/config/null_string_error:
  xserver-xfree86/config/monitor/range_input_error:
  xserver-xfree86/autodetect_video_card: true
* xserver-xfree86/config/inputdevice/keyboard/variant:
* xserver-xfree86/config/inputdevice/mouse/port: /dev/psaux
* xserver-xfree86/config/write_files_section: true
  xserver-xfree86/autodetect_monitor: true
Reply to:
Follow-Ups:
- Bug#315315: xserver-xfree86: accel disabled on ct69000
  - From: ucko@debian.org (Aaron M. Ucko)
- Bug#315315: xserver-xfree86: accel disabled on ct69000
  - From: Dan Christensen <jdc@uwo.ca>
Prev by Date: libxrender_0.9.0-1_powerpc.changes ACCEPTED
Next by Date: Re: Bug#233001: xserver-xfree86: tseng ET40000 does not work with X with neither the tseng, vesa nor vga driver
Previous by thread: libxrender_0.9.0-1_powerpc.changes ACCEPTED
Next by thread: Bug#315315: xserver-xfree86: accel disabled on ct69000
Index(es):
- Date
- Thread