[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#308823: xserver-xfree86: [debconf] vertical refresh range question doesn't allow for discrete values

Package: xserver-xfree86
Version: 4.3.0.dfsg.1-12.0.1
Severity: normal

The vertical refresh range question says:
"Please enter either a comma-separated list of discrete values (for
fixed-frequency displays), or a pair of values separated by a dash
(all modern CRT's).  This information should be available in your
monitor's manual.  Values lower than 50 or higher than 160 are extremely rare.

Enter your monitor's vertical refresh range."

But if I enter "60, 75" "60 , 75" or "60,75" (valid values for my
monitor) I get the error text that says:
"Please enter a comma-separated list of ranges or values.

The valid syntax is a comma-separated list of discrete values, or a pair
of values separated by a dash."

-- Package-specific info:
Contents of /var/lib/xfree86/X.roster:

/etc/X11/X target unchanged from checksum in /var/lib/xfree86/X.md5sum.

X server symlink status:
lrwxrwxrwx  1 root root 20 2005-05-11 15:47 /etc/X11/X -> /usr/bin/X11/XFree86
-rwxr-xr-x  1 root root 1745900 2005-02-23 02:07 /usr/bin/X11/XFree86

Contents of /var/lib/xfree86/XF86Config-4.roster:

VGA-compatible devices on PCI bus:
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 85)

/etc/X11/XF86Config-4 unchanged from checksum in /var/lib/xfree86/XF86Config-4.md5sum.

XFree86 X server configuration file status:
-rw-r--r--  1 root root 2799 2005-05-12 08:12 /etc/X11/XF86Config-4

Contents of /etc/X11/XF86Config-4:
# XF86Config-4 (XFree86 X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#   cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
#   md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum
#   dpkg-reconfigure xserver-xfree86

Section "Files"
	FontPath	"unix/:7100"			# local font server
	# if the local font server has problems, we can fall back on these
	FontPath	"/usr/lib/X11/fonts/misc"
	FontPath	"/usr/lib/X11/fonts/cyrillic"
	FontPath	"/usr/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/lib/X11/fonts/Type1"
	FontPath	"/usr/lib/X11/fonts/CID"
	FontPath	"/usr/lib/X11/fonts/Speedo"
	FontPath	"/usr/lib/X11/fonts/100dpi"
	FontPath	"/usr/lib/X11/fonts/75dpi"

Section "Module"
	Load	"GLcore"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"speedo"
	Load	"type1"
	Load	"vbe"

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"keyboard"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xfree86"
	Option		"XkbModel"	"pc104"
	Option		"XkbLayout"	"us"

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"ZAxisMapping"		"4 5"

Section "Device"
	Identifier	"Matrox G450"
	Driver		"mga"
	VideoRam	32768

Section "Monitor"
	Identifier	"ViewSonic VG910S"
	HorizSync	60-80
	VertRefresh	60-75
	Option		"DPMS"

Section "Screen"
	Identifier	"Default Screen"
	Device		"Matrox G450"
	Monitor		"ViewSonic VG910S"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024"
	SubSection "Display"
		Depth		4
		Modes		"1280x1024"
	SubSection "Display"
		Depth		8
		Modes		"1280x1024"
	SubSection "Display"
		Depth		15
		Modes		"1280x1024"
	SubSection "Display"
		Depth		16
		Modes		"1280x1024"
	SubSection "Display"
		Depth		24
		Modes		"1280x1024"

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"

Section "DRI"
	Mode	0666

No XFree86 X server log files found.

-- System Information:
Debian Release: 3.1
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.11
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)

Versions of packages xserver-xfree86 depends on:
ii  debconf [debconf-2.0           Debian configuration management sy
ii  libc6                2.3.2.ds1-21        GNU C Library: Shared libraries an
ii  libgcc1              1:3.4.3-12          GCC support library
ii  xserver-common       4.3.0.dfsg.1-12.0.1 files and utilities common to all 
ii  zlib1g               1:1.2.2-4           compression library - runtime

-- debconf information:
* xserver-xfree86/config/device/identifier: Matrox G450
  xserver-xfree86/config/monitor/screen-size: 17 inches (430 mm)
* xserver-xfree86/config/device/use_fbdev: false
* xserver-xfree86/config/monitor/selection-method: Advanced
  shared/default-x-server: xserver-xfree86
* xserver-xfree86/config/inputdevice/mouse/emulate3buttons: false
* xserver-xfree86/config/device/bus_id:
* xserver-xfree86/config/inputdevice/keyboard/layout: us
* xserver-xfree86/config/monitor/horiz-sync: 60-80
* xserver-xfree86/config/monitor/identifier: ViewSonic VG910S
* xserver-xfree86/autodetect_mouse: false
* xserver-xfree86/config/device/video_ram: 32768
  xserver-xfree86/config/monitor/mode-list: 1280x960 @ 60Hz
* xserver-xfree86/config/monitor/lcd: true
* xserver-xfree86/config/inputdevice/keyboard/rules: xfree86
* xserver-xfree86/multiple_possible_x-drivers:
* xserver-xfree86/config/inputdevice/keyboard/model: pc104
* xserver-xfree86/config/write_dri_section: true
* xserver-xfree86/config/device/driver: mga
* xserver-xfree86/config/monitor/vert-refresh: 60-75
* xserver-xfree86/config/display/default_depth: 24
* xserver-xfree86/config/inputdevice/mouse/zaxismapping: true
* xserver-xfree86/config/display/modes: 1280x1024
* xserver-xfree86/config/modules: GLcore, bitmap, dbe, ddc, dri, extmod, freetype, glx, int10, record, speedo, type1, vbe
* xserver-xfree86/config/inputdevice/keyboard/options:
  xserver-xfree86/config/inputdevice/mouse/protocol: ImPS/2
* shared/multiple_possible_x-servers:
* xserver-xfree86/config/monitor/range_input_error:
* xserver-xfree86/autodetect_video_card: true
* xserver-xfree86/config/inputdevice/keyboard/variant:
* xserver-xfree86/config/inputdevice/mouse/port: /dev/input/mice
* xserver-xfree86/config/write_files_section: true
* xserver-xfree86/autodetect_monitor: false


Reply to: