tag 241274 + moreinfo
thanks
On Thu, Apr 01, 2004 at 12:19:40PM +0200, Rafael Torresca wrote:
> # use a pc105 model, not a pc104:
> # Option "XkbModel" "pc105"
>
> I've already done so, but the problem remains.
>
> The XF86Config-4 is:
> Section "InputDevice"
> Identifier "Generic Keyboard"
> Driver "keyboard"
> Option "CoreKeyboard"
> Option "XkbRules" "xfree86"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "es"
> EndSection
>
> and
>
> $ xmodmap -pke
>
> gives
>
> keycode 92 = Print Sys_Req
> keycode 93 =
> keycode 94 =
> keycode 95 = F11 XF86_Switch_VT_11
> keycode 96 = F12 XF86_Switch_VT_12
>
> Thanks for the answers.
Please try the troubleshooting procedure described in the FAQ.
http://necrotic.deadbeast.net/xsf/XFree86/trunk/debian/local/FAQ
*) Why doesn't my "< >" key work?
[Thanks to Guillem Jover and Ingo Saitz for their assistance researching this
entry.]
In XFree86 4.3.0, the stock configuration data for the X Keyboard Extension
(XKB) was overhauled. One of the few downsides to this much-needed update was
that the "< >" key commonly found on European keyboards stopped functioning.
Users of 102- or 105-key PC keyboards (as well as miniature and laptop
keyboards compatible with these models) should ensure that their keyboard is
configured accordingly in the XF86Config-4 file, using the "pc102" or "pc105"
XkbModel instead of "pc101" or "pc104", respectively. U.S.-style PC keyboards
do not have a "< >" key, it is this additional key that distinguishes a pc102
keyboard from a pc101 keyboard, and a pc105 keyboard from a pc104 keyboard.
If your keyboard has a "< >" key, you probably have a 102- or 105-key model.
The "< >" key may not work if you do not configure your keyboard model
correctly. You can use "dpkg-reconfigure xserver-xfree86" to change this
configuration parameter, or edit /etc/X11/XF86Config-4 directly.
If you have done this, or have already confirmed that your XkbModel is set to
"pc102" or "pc105" in the XF86Config-4 file, but your "< >" key *still*
doesn't work in X, then an X client is probably reconfiguring your keyboard
after the server starts.
To confirm this, start the X server in a way that bypasses all client-side
initialization, and use the xev program from the xbase-clients package to
determine whether your "< >" key works when the X server initially starts.
Here's one way to do it from a virtual console:
$ xinit /usr/bin/X11/xev -- :1 vt8 > /tmp/xev.out
This starts the X server using server number 1 (in case you already have a
session active on :0), on virtual console 8, and runs the xev client,
redirecting xev's output to a temporary file.
Move the mouse cursor into the white window, then press and release the "< >"
key. (There will be no visible response to your keystrokes.) Then kill the X
server, either by using CTRL-ALT-BACKSPACE or by switching back to the virtual
console from which you ran xinit, and typing CTRL-C.
Next, use your favorite pager program to view xev's output:
$ pager /tmp/xev.out
Near the end (after a whole lot of mouse events), you will see something like
this:
KeyRelease event, serial 28, synthetic NO, window 0x1a00001,
root 0x58, subw 0x0, time 19431502, (57,266), root:(553,290),
state 0x0, keycode 94 (keysym 0x3c, less), same_screen YES,
XLookupString gives 1 bytes: "<"
Note particularly the "keycode" and "keysym" information.
If, instead, you see something like this:
KeyRelease event, serial 28, synthetic NO, window 0x1e00001,
root 0x58, subw 0x0, time 20019010, (425,-87), root:(429,281),
state 0x0, keycode 94 (keysym 0x0, NoSymbol), same_screen YES,
XLookupString gives 0 bytes: ""
Then the X server is not starting with the correct keymap for your locale, and
you need to check your XF86Config-4 file again. You may have a subtle
problem, such as multiple keyboard input devices defined in the file (and the
wrong one is being used), or the XF86Config-4 file may have been disregarded
in favor of a different configuration file. See the XF86Config-4(5x) manual
page for more information on these types of problems.
Also note that the XFree86 X server log file (such as /var/log/XFree86.0.log)
will not only tell you the name of the configuration file that was used, but
also what the X server thinks the keyboard configuration is.
If the X server can see your "< >" key when it starts this way, but not
normally, then you *do* have a problem with an X client changing it after the
X server starts. Several X clients can do this, including:
* xmodmap
* setxkbmap
* the KDE Control Center
* the GNOME Control Center
The xmodmap client is deprecated for keyboard manipulation, but some people
still use it. The best way to see if it is running is to check the system's X
session scripts as well as your own. E.g.:
$ grep -irs xmodmap /etc/X11/xkb $HOME/.xsession
The setxbdmap client is pretty straightforward, and can be searched for the
same way. Make sure it is not being invoked with the "-model pc101" "-model
pc104" arguments, for example. See setxkbmap(1x) for more information.
In KDE 3.2, the relevant Control Center menu is Regional & Accessibility ->
Keyboard Layout.
In GNOME 2.4, right-click the GNOME keyboard applet and select "Settings...".
--
G. Branden Robinson | The more you do, the more people
Debian GNU/Linux | will dislike what you do.
branden@debian.org | -- Gerfried Fuchs
http://people.debian.org/~branden/ |
Attachment:
signature.asc
Description: Digital signature